Our Products
Corrosion And Rust Control Products
2 Products availableSteel & Steel Products
1 Products availablePolishing Service
1 Products availableFabric
1 Products availableWe are leaders in the market for providing best range of Degreasing Compound, Weld Scale Remover of Fabricates and degreasing compounds
India's first solvent formulation that improves cleaning efficiency meets rigid international standards for re-establishing retaining surface qualities of ferrous and non-ferrous group of material.
Till now, little or no attention has been given to Efficient maintenance of machines /parts in our Industries.
We use the conventional method of cleaning machines and parts with Fuel, Kerosene and Diesel or the expensive imported products. They are hazardous and ozone layer depletors.
These chemicals cause corrosion and reduce the life of a machine. This leads to extra expenditure and low efficiency.
The product is available in Aerosol spray and in loose packing.
Product information
Is an organic degreasing and cleaning compound that can be used to remove contamination's from any machine elements before it undergoes manufacturing operations like Bending, Painting, Planting, Sealing, Welding and specialized surface treatment.
It removes oil and water-soluble contaminants while insoluble materials are removed during cleaning.
Is ideal for any precision product or cleaning of any moving parts of the machines
Can be used for applications by spray, immersion and wiping and other conventional methods.
It has a flash point of 46.1C, Vapour pressure of 1.7mm og Hg at 25C and Evaporation rate of 20 ( Based on Butyl Acetate =1).
This makes, Our invention-SOLVE 1, India's first cleaning solvent formulation, that revolutionizes the cleaning efficiency of precision component of any machine. SOLVE 1 also meets rigid international standards for re-establishing and retaining surface qualities of ferrous and non-ferrous group of materials.
Unique Properties / Advantages of SOLVE 1
Environmental friendly.
No Halogenated compounds 100% pollution free.
Many organic solvent cleaners like Trichloroethylene, Acetone, Benzene, and Carbon tetra chloride have been classified as hazardous air pollutant or Ozone layer depleting substances. Solve 1 is neither hazardous nor ozone layer depletor and therefore it does not cause any air pollution.
In fact Solve 1 is an ethyl lactate based formulation which U.S. Federal Drug Administration (US FDA) has approved as environment friendly substance.
High cleaning efficiency
Non corrosive, non reactive
Non corrosive to machine parts unlike Petrol, Diesel and Kerosene
Non reactive with metals and non metals
No evaporation hence
Non reactive to Rubber
Technical Information Standard of Manufacturing Solve 1 is manufactured with American know how and meets demands made by ASTM 38736.
Test standards Passes the following Corrosion Potential Test with Ferrous and Non Ferrous metals as substrates
ASTM F 483 : Immersion Corrosion
ASTM F 1110 : Sandwich Corrosion
ASTM F 119 : Hydrogen Embrittlement
ASTM G 38 : Stress Corrosion
Volatile Organic Compounds ASTM D 3960
Passes clean air requirements 0.0001%
Dry Residue Evaporation without leaving residue on the surface
Applications of Solve 1
Removal of Red Oxide from Machine members
MECHANICAL PARTS Machine Spindles, Bearings, Mechanical Shaft Seals, Bearing housings, Journals, Gear Boxes, Gears, Cams, Shafts, Couplings, Clutches, Levers, Sub assemblies, Precision Instruments and General mechanical Components, Any assembled part of machine.
HYDRAULIC ASSEMBILES Mechanical Components of Vane pumps, Motors, Piston pumps, Torque motors, Pressure control valves, Directional control valves, Flow control valves, Check Valves.
ELECTRONIC PARTS Electronic Heat Sinks, Computer Drive mechanisms, Memory Drums and Discs, Terminal and lead wires, Chassis, Connectors, Diodes, Transistor Cans, Interlocks, Junction Fittings, PCBs.
RUBBER PARTS Shaft Seals, Sealing Elements, 'O' rings, Seals, Wipers etc.
No. |
Pack Size |
Direction to Use |
Precaution |
|
|
|
|
1. |
300ml Aerosol Spray |
Shake well before use |
Keep it in a room temperatures |
|
500ml Aerosol Spray |
After spray wait for few seconds for best cleaning efficiency |
Not to stored near fire |
|
|
Keep the lid covered when not in use |
Not to spray on Red Hot |
|
|
Clean by Fibre bristle brush |
|
|
|
By Swabbing |
|
|
|
By immersion or washing |
|
|
|
By ultrasonic cleaning |
|
|
|
|
|
2. |
5, 10,20 & 35 Lt., HDPE containors |
After use wait for few seconds for best cleaning efficiency ( reaction time). |
Keep it in a room temperatures |
|
|
By fiber bristle brush |
Not to store near fire. |
|
|
By Swabbing |
|
|
|
By immersion or washing |
|
|
|
By ultrasonic cleaning |
|
Welded joints of stainless steels produce a heavy tightly adherent oxide film, usually referred to as Welding Scale.
The removal of this scale is known as PICKLING. Where as PASSIVATION is a process on Stainless Steel by virtue of which, a passive film is formed on it when it comes in contact with atmospheric air. This film, stabilized by chromium, is considered to be continuous, non porous, insoluble and self-healing.
Application of WSR-300 on weld joints of Stainless Steels has following advantages.
Removal of oxide scales from welded joints (performs PICKLING)
Formation of passive layer on SS (performs PASSIVATION)
Removal of iron particles from weld surface (PASSIVATION requirement) APPLICATION METHOD Remove slag properly from weld joint. (Slag Prevents quality of pickling and passivation)
Degrease and clean weld joint by suitable solvent to remove dirt, dust, grease, oil, crayon marking and other contaminants. (For best results, use our solvent cleaner SOLVE 1)
Ensure that the joint is at room temperature. Use bristle brush and gently apply the WSR-300 solution so that the solution reaches even the cavities on the joint. Apply such that the heat tinted zone on one inch, either side of the joint is also covered. (Even apply two/three coats of this solution where welding discoloration is high)
Let the solution react with metal for 2/3 minutes. Do not expose joint to sunlight. (Excess reaction time will have no adverse effect on the joint)
Thoroughly rinse the joint with the water fill till the solution is removed. Any visible seale can be removed with SS wire brush.
AVAILABILITY
5, 10, 20 35 & 50 liter Pack and 1kg Gel Pack.