Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

AI

ARUN INDUSTRIES
location Kabnur, Kolhapur, Maharashtra

Verified Write a Review
View Number

Our Products

  1. Industrial Machinery 10 Products available
  2. Testing Equipment 6 Products available
  3. Others Products 1 Products available

Industrial Machinery

Our Complete range of products are Universal Testing Machines, Front Loading Universal Testing Machines, Servo Control Universal Testing Machine, Digital Rockwell Hardness Testing Machines and Torsion Testing Machines - Mechanical.

Universal Testing Machines

Universal Testing Machines
We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )

Features
  • Loading Accuracy as high as + 1%
  • Straining at variable speeds to suit a wide range of materials.
  • Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials
  • Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.
  • High reading accuracy due to large size and design of dial.
  • Wide range of standard and special accessories, including load stabilizer.
  • Easy change from plain to threaded and screwed specimens.
  • Large effective clearance between columns enables testing of standards specimens as well as structures.
  • Simple controls for ease of operation.
  • Robust staining frame of an extremely rigid construction.
  • Safe operation ensured be means of safety devices.
  • Fully enclosed and protected pendulum.
Application

ARUN Universal Testing Machine is designed for testing materials and other materials under tension, compression bending, transverse and shear loads.

Principal of Operation
Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.
Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represents the absolute load applied on the test specimen. Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.



Machine consists of Straining Unit
This consists of a hydraulic cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross-head is rigidly fixed to the table by two straight columns. The lower cross-head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured be reveling the cylinder and ram of of any possible side loading by the provision of ball seating's.
An elongation scale with a minimum graduation of 1 mm is provided to measure the deformation of the specimen. Tension test is conducted by gripping the test specimen between the upper and lower cross-heads
Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table. The lower cross-head can be raised or lowered rapidly by operating the screwed columns thus facilitating ease of fixing of the test specimen.



Control Panel
The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.



Power Pack
The power pack generates the maximum pressure of 200 kgf/cm2 the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.



Hydraulic Controls
Hand operates wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of piston movement. Control by this valve allows extensometer readings to be taken.



Load Indicator System
This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded.



Pendulum Dynamometer
This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.



Autographic Continuous Roll Load-Elongation Recorder
This unit is of the pen and drums type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ration of either 1:5 or 1:10.



Accuracy & Calibration
II ARUN Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : Part 1 : 1992 and IS 1828 : (Part 1) : 1991. ARUN Universal Testing Machines comply with Grade "A" of BS: 1610: Part 1:1992 and class 1 of IS 1828: (Part1): 1991
An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.

MODEL - UTN-10 UTN-20 UTN-40 UTN-60 UTN-100
 Maximum capacity  kN  100  200  400  600  1000
 1st Measuring Range  kN  0-100  0-200  0-400  0-600  0-1000
 Minimum Graduations  kN  0.2  0.4  1  1  2
 2nd Measuring Range  kN  0.50  0-100  0-200  0-300  0-500
 Minimum Graduations  kN  0.1  0.2  0.5  0.5  1
 3rd Measuring Range  kN  0.25  0-50  0-100   0-120   0-250 
 Minimum Graduations  kN  0.05  0.1  0.25  0.2  0.5
 4th Measuring Range  kN  0.10  0-20  0-40  0-60  0-100
 Minimum Graduations  kN  0.02  0.04  0.1  0.1  0.2
 Clearance for tensile at fully descended working piston   mm  50-700  50-700  50-700  50-800  50-850
  Clearance for compression test at fully descended working piston  mm  0-700  0-700  0-700  0-800  0-850
 Clearance between columns  mm  500  500  500  600  750
 Ram stroke  mm  150  200  200  250  250
 Straining/piston speeds (at no load) mm/min  0-300  0-150  0-150  0-100  0-80
 CONNECTED LOAD -  - - - - -
 HP -  1.3  1.3  2.3  2.5  3.5
 V -  400-440  400-440  400-440  400-440  400-440
 ø -  3  3  3  3  3
 DIMENSIONS -  - - - - -
 L X W X H (approx.)  mm  2032 x
750 x
1960 x		  2032 x
750 x
1960 x		  2060 x
750 x
2180 x		  2065 x
750 x
2534 x		  2415 x
815 x
2900 x
 Weight approx.  kg  1500  1500  2500  3500  5500
 STANDARD ACCESSORIES -  - - - - -
 FOR TENSION TEST -  - - - - -
 Clamping jaws for flat specimens diameter   mm  10-20

20-30		  10-20

20-30		  10-25

25-40		  10-25
25-40
40-55		  10-25
25-45
45-70
 Clamping jaws for flat specimens thickness width  mm  0-10
10-20

50		  0-10
10-20

50		  0-15
15-30

65		  0-15
15-30

70		  0-22
22-44
44-65
70
 FOE COMPRESSION TEST  mm  -  - - - -
 Pair of compression plates of diameter  mm  120  120  120  120  160
 FOR TRANSVERSE TEST  mm  - - - - -
 Table with adjustable rollers width of rollers  mm  160  160  160  160  160
 Diameter of rollers  mm  30  30  30  50  50
 Maximum clearance between supports  mm  500  500  500  600  800
 Radius of punch tops  mm  6,12  6,12  12, 16  16, 22  16, 22



































View Complete Details
Ask Latest Price & Details
Front Loading Universal Testing Machines

Front Loading Universal Testing Machines
We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )

Features
  • Hydraulic front loading wedge action grips
  • Loading Accuracy as high + 1%
  • Straining at variable speeds to suit a wide range of materials.
  • Printer & PC Graphs enables to study the behavior of the material
  • Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials
  • Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.
  • High reading accuracy due to large size and design of dial.
  • Wide range of standard and special accessories, including load stabilizer.
  • Easy loading of specimens.
  • Large effective clearance between columns enables testing of standards specimens as well as structures.
  • Simple controls for ease of operation.
  • Robust staining frame of an extremely rigid construction.
  • Safe operation ensured be means of safety devices.
  • Fully enclosed and protected pressure transducer
  • RS 232 serial port to transfer data to computer for analysis/storage, evaluation etc.
  • Manual control & release valve operation

Application
ARUN Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted.

Principal of Operation
Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.
The Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The tansducer gives the signal to the electronic display unit, corresponding to the load exerted by the main ram.simultaneously the digital electronic fitted on the straining unit gives the mechanical displacement to the electronic display unit. Both the signals are processed by the microprocessor and load & displacement is displayed.

Machine consists of
Straining UnitAn elongation scale with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.
Tension test is conducted by gripping the test specimen between the upper and lower cross-heads, Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.
The lower cross-head can be raised or lowered rapidly by operating the screwed columns thus facilitating ease of fixing of the test specimen.

Control Panel
The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.


Power Pack
The power pack generates the maximum pressure of 200 kgf/cm2 the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.

Hydraulic Controls
Hand operates wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of piston movement. Control by this valve allows extensometer readings to be taken.

Load Indicator System
This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded.

Pendulum Dynamometer
This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate friction. The dynamometer
system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.

Autographic Continuous Roll Load-Elongation Recorder
This unit is of the pen and drums type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ration of either 1:5 or 1:10.

Accuracy & Calibration
All ARUN Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828 : (Part 1) : 1991.
ARUN Universal Testing Machines comply with Grade "A" of BS : 1610 : Part 1:1992 and class 1 of IS 1828 : (Part1) : 1991 An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.

Model Unit UTN-10 UTN-20 UTN-40 UTN-60 UTN-100
 Maximum capacity  kN  100  200  400  600  1000
 1st Measuring Range  kN  0-100  0-200  0-400  0-600  0-1000
 Minimum Graduations  kN  0.2  0.4  1  1  2
 2nd Measuring Range  kN  0.50  0-100  0-200  0-300  0-500
 Minimum Graduations  kN  0.1  0.2  0.5  0.5  1
 3rd Measuring Range  kN  0.25  0-50  0-100   0-120   0-250 
 Minimum Graduations  kN  0.05  0.1  0.25  0.2  0.5
 4th Measuring Range  kN  0.10  0-20  0-40  0-60  0-100
 Minimum Graduations  kN  0.02  0.04  0.1  0.1  0.2
 Clearance for tensile at fully descended working piston   mm  50-700  50-700  50-700  50-800  50-850
 Clearance for compression test at fully descended working piston  mm  0-700  0-700  0-700  0-800  0-850
 Clearance between columns  mm  500  500  500  600  750
 Ram stroke  mm  150  200  200  250  250
 Straining/piston speeds (at no load)   mm/min  0-300  0-150  0-150  0-100  0-80
 Connected Load -  - - - - -
 HP -  1.3  1.3  2.3  2.5  3.5
 V -  400-440  400-440  400-440  400-440  400-440
 ø -  3  3  3  3  3
 Dimensions -  - - - - -
 L X W X H (approx.)  mm  2032 x 750 x 1960 x  2032 x 750 x 1960 x  2060 x 750 x 2180 x  2065 x 750 x 2534 x  2415 x 815 x 2900 x
 Weight approx.  kg  1500  1500  2500  3500  5500
 Standard Accessories -  - - - - -
 For Tension Test -  - - - - -
 Clamping jaws for flat specimens diameter   mm  10-20

20-30		  10-20

20-30		  10-25

25-40		  10-25
25-40
40-55		  10-25
25-45
45-70
 Clamping jaws for flat specimens 
thickness width		  mm  0-10
10-20

50		  0-10
10-20

50		  0-15
15-30

65		  0-15
15-30

70		  0-22
22-44
44-65
70
 For Compression Test  mm  -  - - - -
 Pair of compression plates of diameter  mm  120  120  120  120  160
 For Transverse Test  mm  - - - - -
 Table with adjustable rollers width of rollers  mm  160  160  160  160  160
 Diameter of rollers  mm  30  30  30  50  50
 Maximum clearance between supports  mm  500  500  500  600  800
Radius of punch tops mm 6, 12 6, 12 12, 16 16, 22 16, 22

 

Description Unit AI-UTEFL-10 AI-UTEFL-20 AI-UTEFL-40 AI-UTEFL-60 AI-UTEFL-100
Maximum Capacity kN 100 200 400 600 1000
Measuring Range kN 0-100 0-200 0-400 0-600 0-1000
Load Resolution (20,000 counts full scale) N 5 10 20 30 50
Load Range with accuracy of kN 2 to 100 4 to 200 8 to 400 12 to 600 20-1000
Measurement ± 1 %            
Resolution of Piston movement (Displacement) mm 0.1 0.1 0.1 0.1 0.1
Clearance for tensile test (At fully descended working piston) mm 50 - 700 50 - 700 50 - 700 50 - 800 50-850
Clearance for Compression test
(At fully descended working piston)		 mm 0-700 0-700 0-700 0-800 0-850
Clearance between columns mm 500 500 500 600 750
Ram Stroke mm 150 200 200 250 250
Straining Piston speed (at no load) mm/min 0-300 0-150 0-150 0-100 0-80
Connected Load   2 HP, 400-440V, 3Ph. 2 HP, 400-440V, 3Ph. 3 HP, 400-440V, 3Ph. 3 HP, 400-440V, 3Ph. 5 HP, 400-440V, 3Ph.
Standard Accessories: 
For Tension test 
Clamping jaws for round specimen of diameter		 mm 10 - 20
20 - 30		 10 - 20 
20 - 30		 10 - 20 
20 - 30
30 -40		 10 - 20 
20 - 30 
30 - 40
40-50		 10-20 
20-30 
20-30 
30-40 
40-50 
50-60
Clamping Jaws for flat specimen of thickness mm 0-10 
10 - 20		 0-10
10 - 20		 0-10 
10-20 
20-30		 0-10 
10-20 
20-30		 0-10 
10-20 
20-30 
30-40 
40-50 
50-60
For compression test  Pair of compression plate of diameter mm 120 120 120 120 160
For Transverse Test 
Table with adjustable rollers 
Width of rollers 
Diameter of rollers 
Maximum Clearance between Supports 
Radius of Punch Tops		 mm 
mm 
mm 
mm		 160
30
500
6, 12		 160
30
500
6, 12		 160
30
500
16, 12		 160
50
600
16, 12		 160
50
600
16, 12

 












































































View Complete Details
Ask Latest Price & Details
Servo Control Universal Testing Machine

Servo Control Universal Testing Machine
We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )

Features
  • Motorized Control Valve.
  • Load accuracy as high + 1%.
  • Straining at variable speeds to suit a wide range of materials.
  • Printer & PC graphs enable study the behavior of the material.
  • Motor driven threaded columns for quick effortless adjustment of middle crosshead to facilitate rapid fixing of test specimen.
  • Simplicity in reading because of digital readouts.
  • Wide range of standard and special accessories.
  • Easy change from plain to threaded and screwed specimens.
  • Large effective clearance between columns enables testing of standard specimens as well structures.
  • Simple controls for ease of operation.
  • Robust straining frame of an extremely rigid construction.
  • Fully enclosed and protected pressure transducer.
  • RS 232 serial port for PC control of m/c.

Application
ARUN Universal Testing Machine is designed for testing materials and other materials under tension, compression bending, transverse and shear loads.

Principal of Operation
Here UTM Right Control Valve is Servo Controlled in close loop mode as per mode selection. Following control modes available :
  • Standard Manual Control
  • Potentiometric Control
  • Load Rate Control
  • Elongation Rate Control
  • Load Hold Mode
  • Strain Rate Control

Also Auto Start, Potentiometric start & Initial Valve open start options are available for test to take care of slippage & different specimen types.
Load is applied by hydrostatically lubricated ram. Main cylinder pressure is transmitted to the pressure transducer housed in the control panel. The transducer gives the signal to the electronic display unit, corresponding to the load exerted by the main ram. Simultaneously the digital encoder fitted on the straining unit gives the mechanical displacement.

Machine Consists of Straining Unit
This consists of a hydraulic cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross-head is rigidly fixed to the table by two straight columns. The lower cross-head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured be reveling the cylinder and ram of of any possible side loading by the provision of ball seatings.
An elongation scale with a minimum graduation of 1 mm is provided to measure the deformation of the specimen. Tension test is conducted by gripping the test specimen between the upper and lower cross-heads, Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table. The lower cross-head can be raised or lowered rapidly by operating the screwed columns thus facilitating ease of fixing of the test specimen.

Control Panel
The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.


Software
Windows based basic software for Servo Control is in standard scope of supply
  • Real Time graph, User friendly software.
  • Extensive graphics on screen for curve plotting, magnification and zooming.
  • Software features include Graph comparison, point tracing facility. Different units selection for load & displacement.
  • Statistical evaluation with water fall dig., Mean deviation, frequency distribution, Skew dig., Histogram. Also calculates max. Value, min.value, Mean Value, Variance, Standard Deviation. (Other statistical parameters on request). Selectable batch & statistical printouts.
  • Evaluation of wide range of user selectable parameters such as % elongation, % reduction in area, young's modulus, yield stress, proof stress etc.
  • Optional Software packages for Extensometer, Shear Bend, Torsion, Rubber, Textile testing etc.

Power Pack
The power pack generates the maximum pressure of 200 kgf/cm2 the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.

Hydraulic Controls
Hand operates wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of piston movement. Control by this valve allows extensometer readings to be taken.

Load Indicator System
This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded

Accuracy & Calibration
AII ARUN Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828 : (Part 1) : 1991.
ARUN Universal Testing Machines comply with Grade "A" of BS: 1610: Part 1:1992 and class 1 of IS 1828: (Part1): 1991 An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.

MODEL - AI-UTES-10 AI-UTES-20 AI-UTES-40 AI-UTES-60 AI-UTES-100
 Maximum capacity  kN  100  200  400  600  1000
 1st Measuring Range  kN  0-100  0-200  0-400  0-600  0-1000
 Minimum Graduations  kN  0.2  0.4  1  1  2
 2nd Measuring Range  kN  0.50  0-100  0-200  0-300  0-500
 Minimum Graduations  kN  0.1  0.2  0.5  0.5  1
 3rd Measuring Range  kN  0.25  0-50  0-100   0-120   0-250 
 Minimum Graduations  kN  0.05  0.1  0.25  0.2  0.5
 4th Measuring Range  kN  0.10  0-20  0-40  0-60  0-100
 Minimum Graduations  kN  0.02  0.04  0.1  0.1  0.2
 Clearance for tensile at fully descended working piston   mm  50-700  50-700  50-700  50-800  50-850
  Clearance for compression test at fully descended working piston  mm  0-700  0-700  0-700  0-800  0-850
 Clearance between columns  mm  500  500  500  600  750
 Ram stroke  mm  150  200  200  250  250
 Straining/piston speeds (at no load) mm/min  0-300  0-150  0-150  0-100  0-80
 CONNECTED LOAD -  - - - - -
 HP -  1.3  1.3  2.3  2.5  3.5
 V -  400-440  400-440  400-440  400-440  400-440
 ø -  3  3  3  3  3
 DIMENSIONS -  - - - - -
 L X W X H (approx.)  mm  2032 x
750 x
1960 x		  2032 x
750 x
1960 x		  2060 x
750 x
2180 x		  2065 x
750 x
2534 x		  2415 x
815 x
2900 x
 Weight approx.  kg  1500  1500  2500  3500  5500
 STANDARD ACCESSORIES -  - - - - -
 FOR TENSION TEST -  - - - - -
 Clamping jaws for flat specimens diameter   mm  10-20

20-30		  10-20

20-30		  10-25

25-40		  10-25
25-40
40-55		  10-25
25-45
45-70
 Clamping jaws for flat specimens thickness width  mm  0-10
10-20

50		  0-10
10-20

50		  0-15
15-30

65		  0-15
15-30

70		  0-22
22-44
44-65
70
 FOE COMPRESSION TEST  mm  -  - - - -
 Pair of compression plates of diameter  mm  120  120  120  120  160
 FOR TRANSVERSE TEST  mm  - - - - -
 Table with adjustable rollers width of rollers  mm  160  160  160  160  160
 Diameter of rollers  mm  30  30  30  50  50
 Maximum clearance between supports  mm  500  500  500  600  800
 Radius of punch tops  mm  6,12  6,12  12, 16  16, 22  16, 22



































View Complete Details
Ask Latest Price & Details
Digital Rockwell Hardness Testing Machines

Digital Rockwell Hardness Testing Machines
Principal
Rockwell, Rockwell superficial & Rockwell cum Brinell tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.
RASNE series machines are suitable for Rockwell, Rockwell superficial & Rockwell cum Brinell tests. These are motorized digital Hardness testers having LCD display for easy hardness measurement. The results are displayed in 0.1 Rockwell unit for more accurate measurement.
Various parameters of test can be set on front panel by operation of key board and observing LCD display Viz high / low limits, dwell time, auto / manual start, printer selection, scale selection etc. All set data can be very ARUN edited by pressing SCL key one after another.
Machine operation is very simple. The normal mode is a bar followed by "SET" indication. Raise elevating screw slowly through bar indication till "SET" position which will show "PRESS START" indication. Now press "START" button. Loading / unloading cycle will be completed and hardness is shown on LCD display with High / Good / Low indication. Lower down elevating screw. Panel will show normal mode for next test. Also when required 'AUTO START' on front panel by operation of key board & observing LCD Display then raise elevating screw slowly through bar indication till "SET" position then it will starts loading / unloading cycle automatically & hardness is shown on LCD Display with High / Good / Low indication.

ARUN's new 'RASNE' series of Hardness Testing Machines come with much improved design & look with following major design changes
  • This is motorized machine having automatic loading/unloading cycle suitable for production testing.
  • The machine body is having a taper front look and a large size read-out in the front. The machine is powder coated for better look. The paint shade do not fade and machine looks like new over year.
  • The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height. The accessory is retained for years together due to hardened bush.
  • A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy.
  • An antifriction linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction. This enables testing of small dia. Pin or ball upto 3 mm dia
  • These models are provided with automatic working cycle and digital LCD display with 0.1 Rockwell resolution. This insures productivity with better accuracy.
  • IS:1586:2000 for Rockwell and superficial test. IS:2281:2005 for Brinell hardness test.

Model  RASNE-1  RASNET-1  RASNEB-1
 Testing Table 50mm dia.  1  1  1
 Testing Table 38mm dia. with 'V' groove for round jobs 6 - 45 mm dia.  1  1  1
 Diamond indentor - Rockwell RA  1  -  1
 Diamond indentor - Rockwell SF  -  1  -
 Steel Ball Indentor 1/16" with 5 spare balls  1  1  1
 Steel Ball Indentor 2.5 mm with 5 spare balls  -  -  1
 Test Block Rockwell "C"  1  1  1
 Test Block Rockwell "B"  1  1   1
 Test Block HB 2.5 / 187.5  -  -  1
 Test Block HR 30 N  -  1  -
 Allen Spanners  5  5  5 
 Screw Driver  1  1  1
 Clamping Device  1  1   1
 Wooden Box for Std. Accessories  1  1  1
 Telescopic Sleeves for Elevating screw position  1 Set  1 Set  1 Set
 Spare Fuse 1 Amp.  1   1  1
 Power Cable  1  1  1 
 Brinell Microscope  -  -  1
 Machine Cover  1  1  1
 Instruction Manual  1  1  1

 

Technical Data

 

Model Unit  RASNE-1  RASNET-1  RASNEB-1
 Major Load  N (kgf)  588.4, 980.7, 1471 (60, 100, 150)  147.1, 294.2, 441.3, 588.4,  980.7, 1471
(15, 30, 45, 60, 100, 150) 		  588.4, 980.7, 1471, 1839,  2452  (60, 100, 150, 187.5, 250)
 Minor Load  N  (kgf)  98.07 (10)   29.42, 98.07  (3, 10)  98.07  (10)
 Max.Test height   mm  230  230  230
 Depth of throat  mm   133  133  133
 Net wt. Approx.  kg.  75  77  77
 M/c Dimensions  mm  L - 450, W - 175, H - 627  L - 450, W - 175, H - 627  L - 450, W - 175, H - 627

 

ARUN Motorized Digital Hardness Tester

 

 Model  RASNE-1  RASNET-1  RASNEB-1
 Type  Digital Rockwell  Digital Rockwell & Rockwell Superficial  Digital Rockwell cum Brinell
 Operation Cycle  Automatic Load/Dwell/Unload  Automatic Load/Dwell/Unload  Automatic Load/Dwell/Unload
 Preliminary Test Force  98.07N (10 kgf)  29.42N (3kgf) & 98.07N (10kgf)  98.07 N (10kgf)
 Additional Test Force  490.3, 882.6, 1373N (50, 90, 140 kgf)  177.7, 264.8, 441.9, 490.3, 882.6, 
1373N (12, 27, 42, 50, 90, 140 kgf)		  490.3, 882.6, 1373, 1471, 2354N 
(50, 90, 140, 177.5, 240 kgf)
 Total Test Force  588.4, 980.7, 1471N (60, 100, 150 kgf)  141.7, 294.2, 441.3, 588.4, 980.7, 
1471N (15, 30, 45, 60, 100, 150 kgf)		  5800.4, 980.7, 1471, 1839, 2452N
(60, 100, 150, 187.5, 250 kgf)
 Test Force Selection  By external dialing  By external dialing  By external dialing
 Set Position  With LCD bar indicator  With LCD bar indicator  With LCD bar indicator
 Key Board Entry  Through membrane switches for scale, 
GO-No GO & dwell time selection		  Through membrane switches for scale,
GO-ON GO & dwell time selection		  Through membrane switches for scale,
GO-ON GO dwell time selection
 Resolution  0.1 Rockwell  0.1 Rockwell or 
0.1 Rockwell Superficial		  0.1 Rockwell
 Output  Parallel output for connecting Dot Matrix 
Printer to get results indicating serial no. of
tests, hardness scale, hardness value & 
high/good/low indication		  Parallel output for connecting Dot Matrix
Printer to get results indicating serial no. of 
tests, hardness scale, hardness value & 
high/good/low indication		  Parallel output for connecting Dot Matrix
Printer to get results indicating serial no. of 
tests, hardness scale, hardness value & 
high/good/low indication
 Optional  Serial PD interface & windows software  Serial PC interface & windows software  Serial PC Interface & windows software for 
only Rockwell scales



















View Complete Details
Ask Latest Price & Details
Torsion Testing Machines - Mechanical

Torsion Testing Machines - Mechanical
We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )

Features
  • Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by torque transducer system.
  • Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque angle of twist.
  • The accuracy of torque indication is 1% of the true torque.
  • Machines up to 25000 Nm. Capacity will be available on special enquiry.
  • ARUN reserves the right of change in above specification due to constant improvements in design.

Technical Data

 

Models Unit TTE-6 TTE-10 TTE-20 TTE-50 TTE-100 TTE-200 TTE-300 TTE-600
 Max. Torque Capacity Nm 60 100 200 500 1000 2000 3000 6000
Least Count Nm 0.006 0.01 0.02 0.05 0.01 0.02 0.03 0.06
 Torsion Speed RPM 1.5 1.5 1.5 0.5 0.5 0.5 0.5 0.5
 Clearance between Grips mm 0-420 0-420 0-420 0-500 0-600 0-1000 0-1000 0-1500
 Grips for Round specimens mm 4-8
8-12		 4-8
8-12		 7-10 
10-15
15-20		 10-17
17-24
24-30		 10-18
18-26
26-34		 20-30
30-40
40-50		 30-40
40-50
50-60		 40-50
50-60
60-70
 Grips for flat Specimens width mm mm 1-5
25		 2-8
25		 3-10
30		 5-12
40		 5-15
50		 10-20
60		 15-25
60		 25-40
70
 Motor (400-440 V, 3 Phase & 50 Hz.) HP 0.5 0.5 0.5 0.5 1.0 1.0 1.5 3.0






















View Complete Details
Ask Latest Price & Details
DIGITAL TORSION TESTING MACHINES

DIGITAL TORSION TESTING MACHINES
We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )

Features
  • Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by torque transducer system.
  • Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque angle of twist.
  • The accuracy of torque indication is 1% of the true torque.

The electronic control panel is built using 8085 microprocessor which incorporates state of the art technology with following features

  • Front Panel membrane type key board for test setup.
  • 7 segment digital display of load displacement/extension.
  • Printer port interface.
  • Serial port communication with PC.
  • Storage of important parameters such as peak load & maximum displacement after test.
  • Preload selection to take care of initial slippage.
  • Optional real time graph & PC software.

Models Unit TTE-6 TTE-10 TTE-20 TTE-50 TTE-100 TTE-200 TTE-300 TTE-600
 Max. Torque Capacity Nm 60 100 200 500 1000 2000 3000 6000
Least Count Nm 0.006 0.01 0.02 0.05 0.01 0.02 0.03 0.06
 Torsion Speed RPM 1.5 1.5 1.5 0.5 0.5 0.5 0.5 0.5
 Clearance between Grips mm 0-420 0-420 0-420 0-500 0-600 0-1000 0-1000 0-1500
 Grips for Round specimens mm 4-8
8-12		 4-8
8-12		 7-10 
10-15
15-20		 10-17
17-24
24-30		 10-18
18-26
26-34		 20-30
30-40
40-50		 30-40
40-50
50-60		 40-50
50-60
60-70
 Grips for flat Specimens width mm mm 1-5
25		 2-8
25		 3-10
30		 5-12
40		 5-15
50		 10-20
60		 15-25
60		 25-40
70
 Motor (400-440 V, 3 Phase & 50 Hz.) HP 0.5 0.5 0.5 0.5 1.0 1.0 1.5 3.0






















View Complete Details
Ask Latest Price & Details
Erichsen Testing Machines

Erichsen Testing Machines
  • Width of Sample mm 90, 70
  • Thickness of sample mm 0.1 - 2
  • Lest Count mm 0.01
  • Overall dimension (approx) mm 450 x 500 x 500
  • Net weight (approx) kg. 72
We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )

"AI" Erichsen tester is designed to carry out Erichsen Cupping test on metals. Quick clamping and manual facilitates faster and trouble free working of the machine.
View Complete Details
Ask Latest Price & Details
Fatigue Testing Machines - AI

Fatigue Testing Machines - AI
We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )

Application
Fatigue Testing Machines are used to test the fatigue strength of materials and to draw S-N diagram by Research Institution Laboratories, Material manufacturers, and various industries. Models : AI-FTM8

Accuracy & Calibration
This machine conforms to requirement of IS : 5075 - 1969 Standards

Salient Features
  • An interlocking system provided puts off the motorat specimen failure
  • Light weight, compact size and very simple design
  • Table model, no need of foundation
  • Simple lever system of changing load
  • Calibration is in Nm
View Complete Details
Ask Latest Price & Details
Impact Testing Machines

Impact Testing Machines
We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )

General Description
The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993
The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale.

(It is read on digital readout in case of electronic machines.)
There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for the Izod, Charpy test respectively, Changing from one striker to another is achieved simply by fixing the new striker into its position.

Model IT - 30 IT - 30 (D) IT - 30 (ASTM) Charpy test IT - 1.5 IT - 0.5
Maximum Capacity 300J / 168J 300J / 170J 300J 15J 5J
Minimum Scale Graduation 2J 0.5J 2J 0.1J 0.05J
Overall Size (Approx.) 1.1m x 0.45 x 1.65m (H) 1.32m x 0.45m x 1.05m (H) 1.4m x 0.5m x 1.9m (H) 0.5m x 0.3m x 0.52m (H) 0.5m x 0.3m x 0.52m (H)
Net Weight (Approx) 375 kg 375 kg 450 kg 70 kg 70 kg
View Complete Details
Ask Latest Price & Details
Tensile Testing Machines - Computerized / Digital

Tensile Testing Machines - Computerized / Digital
We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )

Features
  • These models are suitable for testing metals and iron, Plastics, Rubber, Ceramics, Fabrics, Composites, Cables and wires.
  • Load is measured through a strain gauge based Load Cell and elongation is through rotary encoder.
  • Depending upon the customers requirement a suitable type of grips are available. Extra Load cell can be offered suitable for low load samples.
Software Features

  • Menu driven form system with color graphs to compare sample test results.
  • Test details and reports are stored in database
  • User programmable master test templates
  • User can select test from master test Templates and can start similar test
  • Load and Elongation is continuously displayed on screen
  • Overload protection for machine by electronic control
  • Tare Load and Reset Elongation facility available
  • User selectable sample break detect condition
  • Load rate and strain rate are also displayed while testing
  • Unlimited Load rate and strain rate control steps
  • With Load rate controller, user can hold the load on specimen for unlimited time
  • With Load rate control, user can specify positive or negative Rate of Loading
  • User selectable units for load and displacement (kg, kN, N, Ibf, mm, cm, inch etc.) Results and graphs are automatically displayed accordingly.
  • On line display of Load and Displacement (Stress, Extension, Strain) etc. while test is conducted
  • Provision of auto zeroing of Elongation at preload set by user
  • User Programmable Reports. User can select Header, Footer, Specimen information, Dimensions, Test information, Test results, Stastical analysis as per his need.
  • Generated reports can be exported to PDF file and can be e-mailed
  • If electronic extensometer is used then proof stress values from 0.1% to 1% can be determined
  • Software will give alert to user to remove extensometer when load crosses .2% of Gauge length selected then proof load value is calculated. (With extensometer)
  • Separate graph of extensometer and encoder is displayed
  • Provision of calculation of Load and Elongation at yield, Peak load and Load at break, Yield stress, Ultimate stress etc.
  • Special software for tensile, compression, bend, TOR steel and other test software as per customer requirements

Technical Specification of Tensile Testing Machine

 

Max. Capacity 2500N 5000N 10 kN 25kN 50 kN
Measuring range 0-2500N 0-5000N 0-10kN 0-25kN 0-50kN
ranges Least 0.125 N 0.25N 0.5 N 1.25N 2.5N
Counts          
Elongation Scale 0.01 mm 0.01mm 0.01 mm 0.01mm 0.01mm
L.C.          
Grip separation
without Grip : 
Min 
Max		 25 mm
750 mm		 25 mm
600 mm
variable speed drive stepless variation 5 to 300 mm/min
H.P. (for standard speed) 1 Hp 2hp
Supply 3 Phase, 415Volts, 50Hz AC
Over travel Safety Provided with each model





View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us