Our Products
Dryers
2 Products availableAir Compressor
1 Products availableHeat Exchangers
1 Products availableIndustrial Valves
1 Products availableHoses, Hose Assemblies & Fittings
1 Products availableAutomotive Components
1 Products availableWe offer the best product range of Tank Mounted Compressors.
KPCL Reciprocating, Horizontal Balanced Opposed, Piston Compressors is the result of extensive engineering expertise and experience of over five decades in design, manufacturing, supply and installation of air & gas compressors of various designs, capacities and pressures for a wide range of applications.
These units cover a wide capacity range from 3 m / min to 176 m / min & pressure range from 1 Kg / cmg to 400 Kg / cmg. Compressors up to 6 stage with pressure range up to 400 Kg/cm2g, on a turnkey basis from techno-commercial consultancy to commissioning on site. Sporting a modular design, these compressors conform to the latest versions of compressors standards, as per the requirement of the application. Till date, we have supplied more than 10, 000 compressors designed in-house.
In 1999, we added the Crepple design compressors (Reciprocating, Balance opposed Piston, water cooled Compressors) to our portfolio.
The BOP compressors have minimum power consumption, lower operating temperature & maximum efficiency thus achieving overall economy.
KPCL manufactured and supplied reciprocating compressors and booster compressors handling variety of gases like: Bone dry Nitrogen, wet Carbon dioxide, Recycled gas, Natural gas, Mixture of gases (CO2, N2 and H2), Vinyl Chloride monomer gas, Biogas, LPG, Argon, Crude gas, Sour gas, Dry cracked ammonia, and a host of other industrial gases.
Light & Heavy Engg, Chemical & Petro-chemical, Food Industry, Paper & Pulp, Fertilizer, Sugar, Textile, Iron & Steel, Cement, Copper & Zinc, Power Plants, Oil & gas, Pharmaceuticals, Refinery etc.
Mining, Construction and Civil Engineering, Light & Heavy Engineering, Chemical & Petro Chemical, Paper & Pulp, Shipyard & Port Trusts. Rubber, Glass, Textile, Iron & Steel, Automobile, Cement, Power Plants, Defence, Railways etc.
Chemical & Petro-chemical, Breweries, Mines, Paper & Pulp, Fertilizer, Sugar, Refinery, Oil & Gas, etc.
MLC Pipes has been specially designed for the creation of primary and secondary network for compressed air. To meet current need of the Industries. Multi Layer Composite pipes are been produced with latest German Technology as its state of the art. They technology helps us to reduce numerous bends & fittings unnecessary. The aluminium thickness of pipes has been selected to meet compressive and flexural strength requirement.
Technical Details:
Heat transfer equipment may be designated by type or by the function it performs, such as chiller, condenser, cooler, heater, vaporizer, and so on. The choice of shell-and-tube heat exchanger type is governed mainly by factors such as provision for differential movement between shell and tubes, design pressure, design temperature, and fouling nature of the fluids, rather than the function.
Hot compressed air is cooled to safe and usable temperatures for smooth working of instruments and pneumatic tools.
We design and supply customized vertical as well as horizontal Heat Exchangers to meet the exact demand of our valued customers, ranging from 20 CFM to 1000 CFM and pressure range from 2.0 Kg/cm2g onwards.
Compressors and its accessories are capital equipment. Customers do not afford to have down time of such vital equipment and hence to keep the equipment in healthy condition and to get the desired output of uninterrupted supply of compressed air, use of genuine spare parts is a must. Most of these originalgenuinespare parts are available off the shelf for air/gas compressors and products manufactured & supplied by us.
Almost all Industries are energy cautious, we ARS have a solution by providing energy efficient Tank mounted Reciprocating package air compressors.
Features:
Air contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminates the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, expensive instruments, etc which results in the downtime of whole system.
Our Air Dryers remove the moisture to a level of 600 ppm(w) by using energy efficient refrigeration system and effective heat exchangers. The wet air enters into the economizer (pre cooler) of the refrigerated air dryer and the temperature gets reduced significantly by the outgoing cold air. This medium temperature air further enters in to the evaporator of the refrigerated air dryer and the temperature drops to 2oC by the cold refrigerant. At this temperature the moisture in the vapour form condenses into liquid and the same is separated by high efficient integral moisture separator and automatic drain trap. All the three components (i.e. pre cooler, vaporator and moisture separator) are integrated into one single unit.
It contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminates the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, instruments, etc which results in the downtime of whole system.
Our Air Dryers remove the moisture to a level of 80 ppm(w) by using pressure swing adsorption technology. The wet air enters into one desiccant tower and gets dried by the high performance desiccant adsorbent. The dry air passes through check valves and post filter to the utility. A portion of dry air (depending on the operating pressure and required dew point temperature) passes through an orifice into the other saturated tower at near atmospheric pressure, liberates the entrapped moisture in the desiccant to the atmosphere and regenerates it for the next drying cycle. A reliable electronic timer controls the cycle and valve operations effectively thereby ensures continuous dry air output to the utility.
We, ARS Engineering Private Limited, introduce ourselves as an engineering Company providing compressed air solutions to our valued customers for more than 1.5 decades, by offering pre and after sales services and energy conservation audits.
With extensive efforts by our Research team, recently, we came up with anIMPORT SUBSTITUTE Innovative and energy saving Productviz. ARS-Z series Electronic level sensed Condensate Drains which has got following salient features:
Now-a-days, everybody is cost conscious and uses quality product. By using ARS-Z series condensate drains, both the purposes are served by saving cost of compressed air. Our products have an edge over the competition and hence we are receiving overwhelming response in Indian market and also overseas customers in Middle East and Canada.
Hadapsar, Pune, Maharashtra 