Our Products
Security, Metal & Leak Detectors
2 Products availableScanners
2 Products availableTransducer
2 Products availableSensors And Transducers
1 Products availableWeighing Scales & Measuring Tapes
1 Products availableMeasurement Gauges & Fittings
1 Products availablePrinting Machines & Equipment
1 Products availableMagnets & Magnetic Separators
1 Products availablePower Packs
1 Products availableWe offer a complete product range of MPI Powders, Low Cost Push Rod Camera, Ketos Ring, Analogue Gauss Meter and Copper Braided Pads
In magnetic particle testing, the key role of flaw detection is performed by the powder. Hence, the quality of powder being used greatly influences the quality of the test performed. FlawGlo series includes all types of Magnetic particles for different applications (i.e. oil based, water based & dry application) in both visible as well as fluorescent forms.
Salient Features
Salient Features
We offer low cost push rod & manhole camera from M/s. Ritec Rohr-Inspektionstechnik GmbH, Germany. The push rod cameras are available in three models.
Model | Ideal for ID | Maximum Cable Length |
---|---|---|
RI 1320 SLC | 15mm to 40mm | 20 meter |
RI 2020 SLC | 25mm to 80 mm | 25 meter |
RI 25SLC | 50mm to 150mm | 25 meter |
Sonatest range of ultrasonic flaw detectors comprises of just four models the Sitescan 500S & D-50 offering entry level broadband UT performance & the Masterscan 700S & the D-70 providing the highest specification to the market including 8 filter settings from 100kHz to 22MHz, with 100-450V square wave transmitter and 20-meter range. .
Additional Information:
Payment Terms :
RTD Probes are well known in the nuclear industry for inspection of critical weld areas in pipes and pressure vessels. The realm of applications for these transducers is extensive: inspection of coarse grain austenitic steel, location of under cladding cracks, detection and sizing of IGSCC (Intergranular Stress-Corrosion Cracking), automated scanning of pipe and pressure vessels, and continuous high temperature applications.
Flex transducers are thin, compliant ultrasonic probes that can conform to curved surfaces using fingertip pressure. This enables them to be used on non-flat components to provide improved ultrasound transmission compared to standard hard faced transducers. Flex transducers are made of a thin but durable piezo-electric material that is soft enough to bend and can be shaped to suit curved geometry. By using a soft backing layer, the flexibility of the crystal is retained. The Flex series are available as single element and dual element formats.
Standard Flex transducers are 5MHz or 10MHz at sizes of 6mm, 10mm or 20mm diameter. Flex transducers are ideal for inspecting radius areas of composites and accessing complex geometries in metals, such as weld cap areas or castings. They can be used with any standard ultrasonic instrument.
We manufacture full range of general purpose probes like straight beam, angle beam and TR probes. These probes are available in 2 or 4 MHz and the customers can choose from either Lemo or BNC female connectors on the probe side.
TOFD transducers and wedges generate refracted longitudinal waves in steel. These highly damped longitudinal wave probes provide a high resolution and performance.
Phoenix manufactures a wide range of composite and non-composite TOFD transducers of varying crystal diameters from 2MHz to 15MHz and frequencies ranging from approximately 3.1mm to 20mm. They are for use with the Phoenix range of TOFD wedges.
Phoenix offers a range of manual, semi-automated & fully automated scanners, suitable for weld testing of small bore pipes of any material to bigger diameter steel pipes. It can hold number of transducers based on the type of scanners. It can be used for phased array, TOFD, single element. It also features magnetic wheels.
We offer immersion transducers that are specifically designed to operate in an immersion tank or with bubbler/squirter systems. They are usually manufactured with UHF waterproof connectors and can be designed with flat or focused lenses. All immersion transducers are offered in high resolution, general purpose and high sensitivity.
Balteau is known for its unique, unequalled engineering & manufacturing of industrial x-ray machines for about 100 years. Since the introduction of the first gas insulated unit by Balteau in the late 50s, Balteau has continuously been upgrading & improving its products.
Balteau offering include BALTOSPOT series of portable x-ray machines for site (directional) & crawlers (panoramic), BALTOGRAPH series of stationary & mobile x-ray machines.
we offer full range of magnetic yokes like permanent magnets, ac/dc, battery operated etc. all these yokes are designed to meet the highest standards (astm e1444) & operating conditions in the field. all these yokes are portable, lightweight & water resistant.
salient features ac/dc yoke
The X-Series range of phased array probes have an integral 2.5 metre cable and IPEX connector. The range is compatible with the the Sonatest VEO series and other leading phased array equipment. The X-Series offers the operator a broader choice in range and frequencies; together with the assurance of industry standard configurations.X1 Series Miniature & Sub-Miniature PA ProbesX2 Series General Purpose PA ProbesX3 Series Long Array Probes for Electronic ScanningX4 Series Miniature Phased Array Probes with Integral WedgeX5 Series Medium Phased Array Probes AWS, High Temperature & Deep Penetration
We offer a complete line of high resolution; highly damped delay line probes both with fixed and removable delays. These delay line transducers are recommended for inspection of thin materials, near surface flaw detection and thickness gauging of thin materials. These transducers are also available with high temperature options.
High quality camera for quick visual inspection of sewer manholes and constructions and checking cleaning results in pipes.
Application in pipes DN 200 to DN 1200
Camera unit: