Armsel manufactures Single and Double Girder Bridge Semi-Portal cranes of various capacities up to 45 Mtr span & 50 Ton capacity, generally used in Marble, Steel Rolling Mills, Building and Steel Construction sectors; specially for open area storing, lifting and loading purposes.

In a semi portal crane, one end-carriage of the crane will travel on the gantry rail and the other end-carriage will be travelling on a rail mounted on the ground.

1. Variable speed / Frequency inverter driven motors
2. Frequency inverter control system
3. Sensors to stop Hoist and Bridge travelling
4. Maintenance platforms (optional)
5. Enclosed Conducting System (Bus Bar)
6. Over-weight protection
7. Remote Control
8. Cable Reeling system

The purpose of single girder rail mounted crane was to serve our customers keeping their business profitability and the cranes efficiency and reliability in mind.

Armsel manufactures Rail mounted Single Girder Overhead cranes in SWLs ranging from 1MT up to a SWL of 40MT Salient features of Armsel single girder rail mounted crane are unique design, high performance low maintenance cost and also ease of operation.

Rigid and compact steel structures, less consumption of electricity, low noise levels make our rail mounted cranes more user friendly.

Armsel manufactures Rail mounted Double Girder Overhead cranes in SWLs ranging from 1MT up to a SWL of 100MT or fully customized open winch type crabs.

Rigid and compact steel structures, less consumption of electricity, low noise levels make our rail mounted cranes more user friendly.

Double Girder Cranes can be offered for a very large range of spans, large range of heights of lift as well as a large number of speeds. They can also be provided with multiple hoisting trolleys running on the same bridge.

Armsel manufactures Gantry Cranes ranging from 1Ton to 60 Ton Capacity and up to 45 meters span and Height of lift as per customers requirement. These are generally used outdoors in Engineering Industries, Ship yards, Ports, Granite, Steel Yards, Cement Pipe Industries, Open Yard, Storages places, Container Depots etc.

Armsel makes Single Girder and Double Girder type and these cranes are run on floor mounted rail by its two legs fabricated from steel sections.

Our cranes are manufactured with better design and of high standard of quality coupled with strict safety regulations. Supplied hundreds of cranes, solving problems in lifting & handling area, using effective design, increased quality & safety for greater reliability.

Armsel manufactures Gantry / Goliath cranes up to 50 MT Cap., 60 M Span +10 M overhang on either side. Any Lift.

Armsel makes special purpose Under slung cranes (single & Double girder types) of Lifting capacity ranging from 2 Ton to 25 Tons.

Under slung cranes are used where the head room is limited or where the condition cannot allow other means of support to the crane. Armsel can design & supply custom built under slung cranes as per customer’s requirement.

1. Variable speed / Frequency inverter driven motors
2. Thermistor application in lifting motors
3. Frequency inverter control system
4. Sensors to stop Hoist and G travelling
5. Enclosed Conducting System (Bus Bar)
6. Over-weight protection
7. Remote Control
8. Cable Reeling system

Armsel makes cantilever crane, developed for mid-light lifting applications. Lifting capacity ranges up to 15 tons and span up to 8 Mtrs. Its unique mechanism occupy less space coupled with safety features, high performance, energy and time saving, easy to install and flexible.

These cranes can be used for lifting, transport and loading and unloading goods in the places like factories, manufacturing workshops, automotive assembly line, machine tool workshop, warehouse etc.

1. Variable speed / Frequency inverter driven motors
2. Thermistor application in lifting motors
3. Frequency inverter control system
4. Sensors to stop Hoist and Bridge travelling
5. Maintenance platforms (optional)
6. Enclosed Conducting System (Bus Bar)
7. Remote Control
8. Over-weight protection
9. Cable Reeling system

Armsel manufactures Single and Double Girder Bridge Semi-Portal cranes of various capacities up to 45 Mtr span & 50 Ton capacity, generally used in Marble, Steel Rolling Mills, Building and Steel Construction sectors; specially for open area storing, lifting and loading purposes.

In a semi portal crane, one end-carriage of the crane will travel on the gantry rail and the other end-carriage will be travelling on a rail mounted on the ground.

1. Variable speed / Frequency inverter driven motors
2. Frequency inverter control system
3. Sensors to stop Hoist and Bridge travelling
4. Maintenance platforms (optional)
5. Enclosed Conducting System (Bus Bar)
6. Over-weight protection
7. Remote Control
8. Cable Reeling system

The purpose of single girder rail mounted crane was to serve our customers keeping their business profitability and the cranes efficiency and reliability in mind.

Armsel manufactures Rail mounted Single Girder Overhead cranes in SWLs ranging from 1MT up to a SWL of 40MT Salient features of Armsel single girder rail mounted crane are unique design, high performance low maintenance cost and also ease of operation.

Rigid and compact steel structures, less consumption of electricity, low noise levels make our rail mounted cranes more user friendly.

Armsel manufactures Rail mounted Double Girder Overhead cranes in SWLs ranging from 1MT up to a SWL of 100MT or fully customized open winch type crabs.

Rigid and compact steel structures, less consumption of electricity, low noise levels make our rail mounted cranes more user friendly.

Double Girder Cranes can be offered for a very large range of spans, large range of heights of lift as well as a large number of speeds. They can also be provided with multiple hoisting trolleys running on the same bridge.

Armsel manufactures Gantry Cranes ranging from 1Ton to 60 Ton Capacity and up to 45 meters span and Height of lift as per customers requirement. These are generally used outdoors in Engineering Industries, Ship yards, Ports, Granite, Steel Yards, Cement Pipe Industries, Open Yard, Storages places, Container Depots etc.

Armsel makes Single Girder and Double Girder type and these cranes are run on floor mounted rail by its two legs fabricated from steel sections.

Our cranes are manufactured with better design and of high standard of quality coupled with strict safety regulations. Supplied hundreds of cranes, solving problems in lifting & handling area, using effective design, increased quality & safety for greater reliability.

Armsel manufactures Gantry / Goliath cranes up to 50 MT Cap., 60 M Span +10 M overhang on either side. Any Lift.

Armsel makes special purpose Under slung cranes (single & Double girder types) of Lifting capacity ranging from 2 Ton to 25 Tons.

Under slung cranes are used where the head room is limited or where the condition cannot allow other means of support to the crane. Armsel can design & supply custom built under slung cranes as per customer’s requirement.

1. Variable speed / Frequency inverter driven motors
2. Thermistor application in lifting motors
3. Frequency inverter control system
4. Sensors to stop Hoist and G travelling
5. Enclosed Conducting System (Bus Bar)
6. Over-weight protection
7. Remote Control
8. Cable Reeling system

Armsel makes cantilever crane, developed for mid-light lifting applications. Lifting capacity ranges up to 15 tons and span up to 8 Mtrs. Its unique mechanism occupy less space coupled with safety features, high performance, energy and time saving, easy to install and flexible.

These cranes can be used for lifting, transport and loading and unloading goods in the places like factories, manufacturing workshops, automotive assembly line, machine tool workshop, warehouse etc.

1. Variable speed / Frequency inverter driven motors
2. Thermistor application in lifting motors
3. Frequency inverter control system
4. Sensors to stop Hoist and Bridge travelling
5. Maintenance platforms (optional)
6. Enclosed Conducting System (Bus Bar)
7. Remote Control
8. Over-weight protection
9. Cable Reeling system