Post Buy Requirement

Our Products

  1. Testing Equipment 4 Products available
  2. Battery Chargers

    1 Products available
  3. Data Loggers

    1 Products available
  4. Measuring Instruments & Equipment

    1 Products available
  5. Others Products 1 Products available

Other Products / Services

Our product range contains a wide range of CONSTANT CURRENT DISCHARGER

Ampere Hour Meters

  • Standard shunt used 75m V of 10A, 50A, 100A, 500A, 1000Amps
  • Polarity Uni polar or Bi-polar
  • Indication 4 Digit Seven Segment LED
  • Current Range 10Amps to 1000 Amps
  • Casing and monitoring Table Top, Panel Mounting or DIN Size
  • Accuracy ± 1%
  • Mains 230 V AC 50 Hz/60 Hz or 12 V DC

Digital Ampere Hour Meter, Model No.510, is an Ideal Electronic instrument for the measurement of Ampere Hour of Batteries or any D.C. Source. Digital Ampere Hour Meter is connected between the battery and the load as a series element.

  • Latest Microprocessor Technology used.
  • Direct reading of Ampere Hour capacity.
  • Accurate, reliable, compact and economical.
  • Finds application in battery capacity test, battery formation, monitoring of solar cells etc.
  • Registration of current consumption in Electric Vehicles, Railway, Ships etc.,
View Complete Details

Constant Current Battery Charger

  • Testing of Battery 1 or 2 Nos of 12 V Battery
  • Voltmeter/Ammeter 3 ½ digit digital Voltmeter 7 segment display up to 199.9V
  • Time display Up to 99.99 Hrs by digital display
  • Charge Termination By pre – set voltage / per – set time
  • Voltage pre – set Voltage can pre – set up to 199.9 V by panel keyboard
  • Time pre – set Time can be pre-set up to 99.99 Hrs by panel keyboard
  • Mains 230VV±10%ACH2

Constant current Battery charger Powermans Mod No.505 has been designed with latest micro processor technology control to charge the batteries at constant current rate irrespective of falling or raising of battery terminal voltage and also control the fluctuation of mains voltage. The battery charger had a provision of automatic cutoff after the terminal voltage reached a particular value. The charging current stopped. This is to ensure full charge and avoid over charging. This charging is protected against short circuit and reverse polarity etc.

  • Charges the battery uniformly at constant current rate.
  • Charges the battery to its full capacity.
  • Avoids under charging and over-charging.
  • Battery is kept always at full charged condition.
  • Automatic termination of charge either by pre-set time or pre-set voltage.
  • Minimum ripple and more smooth DC output.
  • Protected against Reverse polarity, Short circuit, Over load.
View Complete Details

BATTERY DATA LOGGER SYSTEM

  • Temperature Range 0-100 C
  • Voltage Channels 20 nos
  • Current Channels 0-10 A/0-100A 1 nos
  • Temp. Channels 2 nos
  • Voltage Range (all channels) 0-30 V
  • Voltage Accuracy +/- 0.5%
  • Amp Hour 999.9 AH 99999 AH
  • Temperature Accuracy +/- 1 C
  • Temperature Probe Acid / Alkali Resistant RTD
  • Print Interval Selectable 30 Sec. to 99 Hrs. 59 Mins
  • Interface with IBM – PC Through Rs.232 serial link
  • Mains 230 V +/- 10% AC 50 Hz
  • Standby Battery 12 V DC 40 AH Battery

Battery Data Logger System Model No.509 has been designed with latest Microprocessor technology to continuously monitor the voltage, Current and Electrolyte Temperature and give a print-out of real Time, Elapsed Time, voltage Current and Electrolyte temperature at pre-set print interval. During power failure the Data logger logs the data and gives the print-out as soon as power resumed. It also gives the print-out of when the power failure occurred and when the power resumed.

  • Monitors & gives print out continuously various parameters
  • Logs Battery Terminal voltage, Current, Electrolyte Temperature, Real Time, Elapsed Time, Date etc.
  • Continue to log the data during power failure with the help of a 12V std by Battery
  • Indicates when the power failed and when the power resumed
  • Provision to select the print interval
  • Provision to set alarm low / high limit for voltage channels
  • Provision to print the select channels only
  • Acid / Alkali resistant RTD sensors for Temperature
View Complete Details

CONSTANT CURRENT DISCHARGER

  • Testing of Battery 1 or 2 Nos of 12 V Battery
  • Voltmeter/Ammeter 3 ½ digit digital Voltmeter 7 segment display up to 199.9V
  • Current Setting By 10 Turn pot meter.
  • Set Accuracy +/- 1%
  • Cooling Forced cooling by fans
  • Mains 230 V +1- 10% AC 50 Hz

Constant Current Discharger, is designed to discharge battery at a constant current. The set current is maintained within +/- 1% irrespective of the falling or raising voltage. The discharger may also be used as a constant load or with a variable voltage as a constant current source. Several units can be connected in parallel in order to increase the current requirement. The equipment is protected against short circuit, over voltage, over load etc.

  • Discharges the battery at constant current
  • Along with rectifier charges the battery at constant current
  • Keeps the current constant irrespective of voltage fluctuations
  • The set accuracy of current is within +/- 1%
  • For higher current no. of units can be connected in parallel
  • Protected against Reverse polarity, Short Circuit, Overload etc.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us