DESCRIPTION

Pure copper powder can be used in the electrical and the electronics industries because of its excellent electrical and thermal conductivities. Alloyed with tin, zinc, nickel and other elements, copper in powder form is used in structural parts and friction materials.

Also, this material can be used in 3D printing, microelectronic devices, metallic and non-metallic surface conductive coating treatment, catalyst and etc.

Application

-Electronic industry

-Diamond tools

-Carbon products

-Friction material

-Conductive ink

-Powder metallurgy products

Industrial Grade Graphene As graphene itself is ideally only one-atom-thick and formed from hexagonally connected carbon atoms. These share a single electron with three other carbon atoms which leave one electron free for adequate electrical conductivity. It is black in color, where the thickness is around 3-4 nanometers with the lateral dimension is 5 to 10 microns. There is 4 to 6 number of layers in the research grade graphene nanopowder.

It has a high aspect ration, about 1000 times greater than the 99% of carbon. Due to its excellent physical features, often result in graphene being called the ‘Super Carbon.’ Owing to these properties, graphene can make into different constructs and forms, such as graphene sheets, graphene-powder, and graphene flakes.

Industrial Grade Graphene is globally considered as being a ‘wonder material, ’ owing to its impressive properties. It is also known as graphene nanopowder, due to it nano-structural behavior. It is one of the strongest and ideal conductors of heat and electricity. This immensely versatile material is finding increasingly widespread application in research and diverse industries all over the world.

Titanium(IV) Sulfate is a moderately water and acid soluble Titanium source for uses compatible with sulfates. Sulfate compounds are salts or esters of sulfuric acid formed by replacing one or both of the hydrogens with a metal. Most metal sulfate compounds are readily soluble in water for uses such as water treatment, unlike fluorides and oxides which tend to be insoluble. Organometallic forms are soluble in organic solutions and sometimes in both aqueous and organic solutions. Metallic ions can also be dispersed utilizing suspended or coated nanoparticles and deposited utilizing sputtering targets and evaporation materials for uses such as solar cells and fuel cells. Titanium Sulfide is generally immediately available in most volumes.

Graphene Nanoplatelets Powder is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available, as is additional technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.

MF: WO3

Chemical Name: Tungsten Oxide Nanorods

Purity: 99.9%

Diameter: 40-60nm

Length: up to 200m

Form Nanorods

CAS Number 1314-35-8

$0.00

Graphene Sheets Powder is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available, as is additional technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.

Graphitic Carbon Nitrideg-C3N4

Nanoparticles Are Also Available in Passivated Ultra High Purity. Nanoparticles Used in Research Area of Strong Scientific Interest Due to The Variety of Application in Biomedical Electronic and Optical Fields. Polyaryletherketone Have Widely Used in Research Area Due to Their Increased Reactivity as Compared with Conventional Nano/Micron Sized Particles.

mf: ni/sio2

chemical name: nickel silica core shell nanoparticles

purity: > 99.99%

aps: 80-100 nm (size customization possible)

form nanopowder

product number: nczcs122

cas number 7440-02-0 / 7631-86-9

.

Nylon (polyamide) powder coating is widely used to protect a variety of metal substrates such as steel & aluminum. It is applied either electrostatically or in a fluid bed. It protects a wide variety of applications from corrosion to impact and abrasion.

Manufactured in our laboratories in Stansted using a unique application method, Agar GO support films are hydrophilic and ideally suited to imaging of small nanoparticles, nanowires and suspensions. The low atomic number and thin-layer thickness results in significantly lower background contrast than conventional supports. Agar GO support films are ideal for Cryo TEM studies. The vitreous ice layer can be significantly thinner providing higher contrast and hence higher resolution for structural determination. GO support films can be applied to other grid sizes, material or type. Further details available on request.

MF: C

Chemical NameGraphene

Purity 99.5%

Diameter 5-7 m

Thickness 4-20 nm

Number of Layers:< 30(Customization possible)

Form Nanopowder

Color Black

Product Number: #NCZC1012

CAS Number 7782-42-5

Ta4AlC3is a member of vdW MAX layered material system. Similar to graphite andMoS2, theMAX phasesare layered and have the general formula: Mn+1AXn, (MAX) where n = 1 to 3, M is an early transition metal, A is a non-metal element and X is either carbon and/or nitrogen. In this particular case, M=Ta, A=Al, and X=C with n=3.

Worlds first electronic and optical grade commercial layered MAXene phase Ta4AlC3 materials:Ta4AlC3 MAX phase has been synthesized at our facilities using large reactor chemical vapor deposition to yield Worlds highest purity (99.999% or higher guaranteed) and layered MAX phases.

The MAX phases are electrically and thermally conductive due to their metallic-like nature of bonding. They are excellent for research quality materials as 2D metals, battery applications, supermetallicity, thermal physics, or as precursors for MXene production.

Ta4AlC3 product consists of microsized layered crystals that measure from 1 micron to 100 microns in size.

Each order contains 2000 mg of high purity and layered Ta4AlC3 MAXenes sealed under inert Ar gas.

The product has been perfected in the last years to reach guaranteed 4:1:3 Ta:Al:C ratios and exhibit extraordinary environmental stability. Each crystallite can be exfoliated either using conventional tape exfoliation or alternatively liquid phase exfoliation technique.

This monolayer graphene is grown by CVD and transferred onto a Quantifoil TEM grid. The graphene is suspended (no substrate underneath) over 2 micron holes.

Graphene Film

• Growth method: CVD Synthesis
• Transfer method: Clean transfer
• Quality control: Optical Microscopy, Raman, SEM and TEM batch checked
• Size: 3mm (TEM grid diameter)
• Appearance (color): Transparent
• Transparency: >97%
• Number of graphene layers: 1 Coverage: >95%
• Thickness (theoretical): 0.345nm
• FET mobility on Al₂O₃: 2, 800cm²/Vs
• Hall mobility on SiO₂: 3, 500cm²/Vs
• Grain size: Up to 10m

QUANTIFOIL

• Type: QUANTIFOILR 2/4
• Hole size: 2m
• Space between holes: 4m

TEM Grid Substrate

• 3.05mm Diameter
• Au coated
• 300 mesh

DESCRIPTION

Pure copper powder can be used in the electrical and the electronics industries because of its excellent electrical and thermal conductivities. Alloyed with tin, zinc, nickel and other elements, copper in powder form is used in structural parts and friction materials.

Also, this material can be used in 3D printing, microelectronic devices, metallic and non-metallic surface conductive coating treatment, catalyst and etc.

Application

-Electronic industry

-Diamond tools

-Carbon products

-Friction material

-Conductive ink

-Powder metallurgy products

Industrial Grade Graphene As graphene itself is ideally only one-atom-thick and formed from hexagonally connected carbon atoms. These share a single electron with three other carbon atoms which leave one electron free for adequate electrical conductivity. It is black in color, where the thickness is around 3-4 nanometers with the lateral dimension is 5 to 10 microns. There is 4 to 6 number of layers in the research grade graphene nanopowder.

It has a high aspect ration, about 1000 times greater than the 99% of carbon. Due to its excellent physical features, often result in graphene being called the ‘Super Carbon.’ Owing to these properties, graphene can make into different constructs and forms, such as graphene sheets, graphene-powder, and graphene flakes.

Industrial Grade Graphene is globally considered as being a ‘wonder material, ’ owing to its impressive properties. It is also known as graphene nanopowder, due to it nano-structural behavior. It is one of the strongest and ideal conductors of heat and electricity. This immensely versatile material is finding increasingly widespread application in research and diverse industries all over the world.

Titanium(IV) Sulfate is a moderately water and acid soluble Titanium source for uses compatible with sulfates. Sulfate compounds are salts or esters of sulfuric acid formed by replacing one or both of the hydrogens with a metal. Most metal sulfate compounds are readily soluble in water for uses such as water treatment, unlike fluorides and oxides which tend to be insoluble. Organometallic forms are soluble in organic solutions and sometimes in both aqueous and organic solutions. Metallic ions can also be dispersed utilizing suspended or coated nanoparticles and deposited utilizing sputtering targets and evaporation materials for uses such as solar cells and fuel cells. Titanium Sulfide is generally immediately available in most volumes.

Graphene Nanoplatelets Powder is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available, as is additional technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.

MF: WO3

Chemical Name: Tungsten Oxide Nanorods

Purity: 99.9%

Diameter: 40-60nm

Length: up to 200m

Form Nanorods

CAS Number 1314-35-8

$0.00

Graphene Sheets Powder is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available, as is additional technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.

Graphitic Carbon Nitrideg-C3N4

Nanoparticles Are Also Available in Passivated Ultra High Purity. Nanoparticles Used in Research Area of Strong Scientific Interest Due to The Variety of Application in Biomedical Electronic and Optical Fields. Polyaryletherketone Have Widely Used in Research Area Due to Their Increased Reactivity as Compared with Conventional Nano/Micron Sized Particles.

mf: ni/sio2

chemical name: nickel silica core shell nanoparticles

purity: > 99.99%

aps: 80-100 nm (size customization possible)

form nanopowder

product number: nczcs122

cas number 7440-02-0 / 7631-86-9

.

Nylon (polyamide) powder coating is widely used to protect a variety of metal substrates such as steel & aluminum. It is applied either electrostatically or in a fluid bed. It protects a wide variety of applications from corrosion to impact and abrasion.

Manufactured in our laboratories in Stansted using a unique application method, Agar GO support films are hydrophilic and ideally suited to imaging of small nanoparticles, nanowires and suspensions. The low atomic number and thin-layer thickness results in significantly lower background contrast than conventional supports. Agar GO support films are ideal for Cryo TEM studies. The vitreous ice layer can be significantly thinner providing higher contrast and hence higher resolution for structural determination. GO support films can be applied to other grid sizes, material or type. Further details available on request.

MF: C

Chemical NameGraphene

Purity 99.5%

Diameter 5-7 m

Thickness 4-20 nm

Number of Layers:< 30(Customization possible)

Form Nanopowder

Color Black

Product Number: #NCZC1012

CAS Number 7782-42-5

Ta4AlC3is a member of vdW MAX layered material system. Similar to graphite andMoS2, theMAX phasesare layered and have the general formula: Mn+1AXn, (MAX) where n = 1 to 3, M is an early transition metal, A is a non-metal element and X is either carbon and/or nitrogen. In this particular case, M=Ta, A=Al, and X=C with n=3.

Worlds first electronic and optical grade commercial layered MAXene phase Ta4AlC3 materials:Ta4AlC3 MAX phase has been synthesized at our facilities using large reactor chemical vapor deposition to yield Worlds highest purity (99.999% or higher guaranteed) and layered MAX phases.

The MAX phases are electrically and thermally conductive due to their metallic-like nature of bonding. They are excellent for research quality materials as 2D metals, battery applications, supermetallicity, thermal physics, or as precursors for MXene production.

Ta4AlC3 product consists of microsized layered crystals that measure from 1 micron to 100 microns in size.

Each order contains 2000 mg of high purity and layered Ta4AlC3 MAXenes sealed under inert Ar gas.

The product has been perfected in the last years to reach guaranteed 4:1:3 Ta:Al:C ratios and exhibit extraordinary environmental stability. Each crystallite can be exfoliated either using conventional tape exfoliation or alternatively liquid phase exfoliation technique.

This monolayer graphene is grown by CVD and transferred onto a Quantifoil TEM grid. The graphene is suspended (no substrate underneath) over 2 micron holes.

Graphene Film

• Growth method: CVD Synthesis
• Transfer method: Clean transfer
• Quality control: Optical Microscopy, Raman, SEM and TEM batch checked
• Size: 3mm (TEM grid diameter)
• Appearance (color): Transparent
• Transparency: >97%
• Number of graphene layers: 1 Coverage: >95%
• Thickness (theoretical): 0.345nm
• FET mobility on Al₂O₃: 2, 800cm²/Vs
• Hall mobility on SiO₂: 3, 500cm²/Vs
• Grain size: Up to 10m

QUANTIFOIL

• Type: QUANTIFOILR 2/4
• Hole size: 2m
• Space between holes: 4m

TEM Grid Substrate

• 3.05mm Diameter
• Au coated
• 300 mesh