GST : 06AAPCA9378P1ZL
Verified
Write a Review
Our Products
We offer the best product range of Copper Metal Foam, Zinc Based Metal Organic Framework, Vanadium Oxide Nanorods and 215 x 279mm Aluminium Oxide Polishing Sheet.
$0.00
| Stock No. | NCZFF102 |
| PPI | 10 to 110, customization is also possible |
| Bulk Density | 0.80-0.85 g/cc |
| Purity | ≥99.9% |
| Porosity | ≥70% , customization is also possible |
| Dimension | 500 mm X 500 mm, customization is also possible |
| Thickness | 1mm to 25mm, customization is also possible |
Physical Characteristics of Cu Foam
| Compression Strength | 131 psi |
| Tensile Strength | 1000 psi |
| Shear Strength | 190 psi |
| Modulus of Elasticity (Compression) | 107 kpsi |
| Modulus of Elasticity (Tension) | 14.6 × 103 psi |
| Shear Modulus | 40.9 kpsi |
| Vickers Hardness | 35 |
| Specific Heat | 0.385 J/g-°C |
| Bulk Thermal Conductivity | 10.1 W/m-°C |
| Coefficient of Thermal Expansion | 1.7 × 10-5 m/m–°C (0-100°C) |
| Bulk Resistivity | 2.56× 10-5 ohm – in |
| Melting Point | 1080 °C |
Copper foam available as open cell and closed cell. Please ask for customization while ordering.
Physical Characteristics Of Heat-absorbing Copper Foam
| Compression Strength | 131 psi |
|---|---|
| Tensile Strength | 1000 psi |
| Shear Strength | 190 psi |
| Modulus of Elasticity (Compression) | 107 kpsi |
| Modulus of Elasticity (Tension) | 14.6 × 103 psi |
| Shear Modulus | 40.9 kpsi |
| Vickers Hardness | 35 |
| Specific Heat | 0.385 J/g-°C |
| Bulk Thermal Conductivity | 10.1 W/m-°C |
| Coefficient of Thermal Expansion | 1.7 × 10-5 m/m–°C (0-100°C) |
| Bulk Resistivity | 2.56× 10-5 ohm – in |
| Melting Point | 1080 °C |
Product Name: Zinc Based Metal Organic Framework
CAS: 7440-66-6
Purity:99%
APS: 30-40m
Molecular Formula:C27H18Zn3O6
Molecular Weight:229.60 g/mol
Density 0.35 g/ cm3
Pore Size: 10
Solubility: Ethanol
Additional Information:
Delivery Time : 6 Days
Product Name: Vanadium Oxide Nanorods
CAS Number: 1314-62-1
APS: 300 nm x 20nm
Purity: >99.9%
Molecular Formula: V2O5
Molecular Weight: 181.88 g/mol
Form: Powder
Density: 3.3 g/cm3
Melting Point: 690C
Additional Information:
Payment Terms : D/A, T/T
Delivery Time : 6 Days
A range of Aluminium Oxide abrasive strips and sheets with resin-bonded polishing powder on a polyester backing. Waterproof bonding ensures that polishing particles remain fixed to the backing, avoiding unwanted scratches on the surface being prepared. Also available with diamond and silicon carbide powders.
Aluminium Oxide abrasive are supplied as a pack of 10 strips 35mm or 70mm wide or single 215x279mm sheets.
