Our Products
Lubricants
1 Products availableOur offered Product range includes Cutoil 30, Coolcut 2000, Coolcut 4000, Forming Oil - Formoil EP and Gearoil EP 68.
| |
|
Technical Specifications
Attributes | Method | Typical Test Data |
---|---|---|
Viscosity @40oC | ASTM D 445 | 32 |
Flash Point COC, oC | ASTM D 92 | 210 |
4 Ball Weld Load in Kgs | ASTM D 2784 | 540 |
Inactive sulpher | Internal | No |
Active Sulpher | Internal | Yes |
Copper Corrosion | ASTM D 130 | 4A |
Pour Point | ASTM D 97 | -3 |
| |
|
Technical Specifications
Attributes | Method | Typical Test Data |
---|---|---|
Density @ 29.5oC | ASTM D 1298 | 0.884 |
Kinematics Viscosity @40oC | ASTM D 445 | 42 |
Flash Point | ASTM D 93 | 170 |
Emulsion stability | IS 1115 | Passes |
Cast Iron Corrosion Test | IS 1115 | 0/0/1 |
PH of 5% solution | ASTM D 70 | 8.9 |
Refractometer correction factor | Internal | 0.9 |
| |
|
Technical Specifications
Attributes | Method | Typical Test Data |
---|---|---|
Density @ 29.5oC | ASTM D 1298 | 0.889 |
Kinematics Viscosity @40oC | ASTM D 445 | 45 |
Flash Point | ASTM D 93 | 170 |
Emulsion stability | IS 1115 | Passes |
Cast Iron Corrosion Test | IS 1115 | 0/0/1 |
PH of 5% solution | ASTM D 70 | 9.0 |
Refractometer correction factor | Internal | 0.98 |
| |
| |
|
Technical Specifications
Attributes | Method | Typical Test Data |
---|---|---|
Viscosity @40oC | ASTM D 445 | 150 |
Viscosity @100oC | ASTM D 445 | 14.8 |
Flash Point COC, oC | ASTM D 92 | 220 |
Copper Corrosion | ASTM D 130 | 2A |
Pour Point | ASTM D 97 | -3 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ยป Technical Specifications
|
| |
|
Attributes | Method | Typical Test Data |
---|---|---|
Density @ 29.50C | ASTM D 1298 | 0.889 |
Kinematics Viscosity @ 400C | ASTM D 445 | 45 |
Flash Point | ASTM D 93 | 170 |
Emulsion stability | IS 1115 | Passes |
Cast Iron Corrosion Test | IS 1115 | 0/0/1 |
PH of 5% solution | ASTM D 70 | 9.0 |
Refractometer correction factor | Internal | 0.98 |
| |
|
Technical Specifications
Attributes | Method | Typical Test Data |
---|---|---|
Viscosity @100oC | ASTM D 445 | 14.8 |
Flash Point COC, oC | ASTM D 92 | 190 |
Copper Corrosion | ASTM D 130 | 2A |
Pour Point | ASTM D 97 | -3 |