• Cutoil12 is neat cutting oil with inactive sulphur as extreme pressure additive
• It is suitable for ferrous & non ferrous metals of medium machining operations
• Recommended for turning on multi-spindle, broaching, tapping, boring & on automats
• Best Suitable for critical machining operations like deep hole drilling

• Due to good load carrying capacity, it can be used even at very low viscosity
• Dow to lower viscosity flow rate is more, hence heat absorption & dissipation is high
• High Flash point hence law fumes
• Due to lower viscosity no need to clean before grinding & other super-finishing operations.
• Gives very good rust & corrosion protection
• Gives better resistance to water wash-out
• Operator & environment friendly

• It is suitable for all types of bearings, moving, sliding & rotating parts
• It is suitable for universal joints, plain bearings in sugar. Steel & cement industries
• It is also suitable when the moisture & steam is always present
• In case of accidental over heating presence of Moly gives guaranteed good lubrication & avoid jamming or cold weld of moving components

• Very good Mechanical stability, even in the presence of salty water
• Very good resistance to repeated shock load & high load
• Odor free performance, hence keeps shop-floor environment healthy
• Gives very good rust & corrosion protection
• Gives better resistance to water wash-out
• Operator & environment friendly
• Good pump ability due to its structure

• Used for high speed rotating spindle lubrication
• It can be used in timing gear, vacuum pump lubrication, depending upon the manufacturers ISO VG specifications.
• It is can be used for lubrication of plain & roller bearings operation under low pressure & temperature.
• Its good viscosity index helps you in maintaining the temperature of your oil.

• Very good anti-wear properties help you in increasing the equipment life
• Resistance to Hydrolysis & Oxidation helps in extending the life of Oil
• Noise free performance, due to very good air release properties
• Gives very good rust protection
• Good filtration ability in presence of water also
• Reduces down time by improving Equipment life

• Specially made for Differential gear systems lubrication
• It is suitable for hypoid rear axles & steering box
• It is suitable general lubricating purpose
• Recommended Heavily loaded gear, fitted to all types of vehicles
• Best Suitable all steel & steel alloys

• Presence of carefully selected additives ensures you better gear life
• High viscosity index gives guaranteed performance even at higher temperature
• Very good resistance to oxidation & wear
• Excellent thermal stability
• Good reserve of alkalinity to prevent acid attack

» Technical Specifications

• Specially made for CNC chuck, for high load & high speed applications even in the presence of water
• It is suitable for all types of Bearings, moving, sliding & rotating parts, pumps; extractors, fans vibrators
• It is suitable for ferrous as well as non ferrous materials & working temperature range from 0^oC to 280^oC
• Mechanisms subjected to steam in paper industry, Chain and roller paths in packing industry, for hot and cold water taps
• Always avoid the contamination of grease by dust &/or dirt while application, clean the part before application for best results
• Can be used for open gear, which are at high load & low speed

• Very good mechanical stability, even in the presence of salty water
• Very good resistance to ageing, oxidation and corrosion
• Gives very good rust & corrosion protection
• Gives better resistance to water wash-out, mild alkaline & acidic solution
• Can withstand at high vibration and speed
• Reduces greasing frequency
• Good pump ability

• Specially made for high load, high temperature application
• It is perfectly suitable for oven doors, conveyors passing through oven, elevators under high load
• Recommended Light to high load in industries like sugar, Cement & steel
• It gives excellent rust protection even in the presence of salty water, heavy dust
• It gives very good protection against wear, no matter for the shock load also
• Best Suitable all steel & steel alloys

• Gives very good bearing or moving parts life
• High Flash point gives guaranteed performance even at very high temperature
• Very good resistance to oxidation & wear
• Provides excellent wear protection even shock load is there
• Excellent thermal stability
• Presence of polyuria reduces lubrication intervals
• No burn marks on the lubricated parts at very high temperature
• Good reserve of alkalinity to prevent acid attack
• Free from lead & other harmful materials, hence operator friendly

• It is suitable for all types of Bearings, moving, sliding & rotating parts.
• It is suitable for universal joints, Knuckle joints.
• It is suitable for ferrous as well as non ferrous materials.
• Suitable for rolling mills application.

• Very good mechanical stability, even in the presence of salty water
• High Drop point
• Odor free performance, hence keeps shop-floor environment healthy
• Gives very good rust & corrosion protection
• Gives better resistance to water wash-out
• Operator & environment friendly
• Good pump ability

• It is suitable for all types of Bearings, moving, sliding & rotating parts
• It is suitable for universal joints, plain bearings
• It is suitable for ferrous as well as non ferrous materials
• Suitable for big press machines, forging hammers & plastic molding machines

• Very good Mechanical stability, even in the presence of salty water
• High Drop point
• Gives very good rust & corrosion protection
• Gives better resistance to water wash-out
• Operator & environment friendly
• Good pump ability Characteristics
• Gives good lubrication for long time
• Help in reducing of noise

• It is suitable for all types of Bearings, moving, sliding & rotating parts.
• It is suitable for universal joints, plain bearings.
• It is suitable for ferrous as well as non ferrous materials.
• Suitable for rolling mills application.

• Very good Mechanical stability, even in the presence of salty water.
• High Drop point.
• Odor free performance, hence keeps shop-floor environment healthy.
• Gives very good rust & corrosion protection.
• Gives better resistance to water wash-out.
• Operator & environment friendly.
• Good pump ability Characteristics.

• Used in hydraulic pumps, hydraulic systems operating under medium to very high pressure.
• It can be used in gear boxes, vacuum pump lubrication, depending upon the manufacturers ISO VG specifications.
• It is can be used for lubrication of plain & roller bearings operation under moderate pressure & temperature.
• Its good viscosity index helps you in maintaining the temperature of your oil.

• Very good Anti-wear properties help you in increasing the equipment life.
• Resistance to Hydrolysis & Oxidation helps in extending the life of Oil.
• Noise free performance, due to very good air release properties.
• Gives very good rust protection.
• Good filtration ability in presence of water also.
• Reduces down time by improving Equipment life.

Technical Specifications

• Cutoil12 is neat cutting oil with inactive sulphur as extreme pressure additive
• It is suitable for ferrous & non ferrous metals of medium machining operations
• Recommended for turning on multi-spindle, broaching, tapping, boring & on automats
• Best Suitable for critical machining operations like deep hole drilling

• Due to good load carrying capacity, it can be used even at very low viscosity
• Dow to lower viscosity flow rate is more, hence heat absorption & dissipation is high
• High Flash point hence law fumes
• Due to lower viscosity no need to clean before grinding & other super-finishing operations.
• Gives very good rust & corrosion protection
• Gives better resistance to water wash-out
• Operator & environment friendly

• It is suitable for all types of bearings, moving, sliding & rotating parts
• It is suitable for universal joints, plain bearings in sugar. Steel & cement industries
• It is also suitable when the moisture & steam is always present
• In case of accidental over heating presence of Moly gives guaranteed good lubrication & avoid jamming or cold weld of moving components

• Very good Mechanical stability, even in the presence of salty water
• Very good resistance to repeated shock load & high load
• Odor free performance, hence keeps shop-floor environment healthy
• Gives very good rust & corrosion protection
• Gives better resistance to water wash-out
• Operator & environment friendly
• Good pump ability due to its structure

• Used for high speed rotating spindle lubrication
• It can be used in timing gear, vacuum pump lubrication, depending upon the manufacturers ISO VG specifications.
• It is can be used for lubrication of plain & roller bearings operation under low pressure & temperature.
• Its good viscosity index helps you in maintaining the temperature of your oil.

• Very good anti-wear properties help you in increasing the equipment life
• Resistance to Hydrolysis & Oxidation helps in extending the life of Oil
• Noise free performance, due to very good air release properties
• Gives very good rust protection
• Good filtration ability in presence of water also
• Reduces down time by improving Equipment life

• Specially made for Differential gear systems lubrication
• It is suitable for hypoid rear axles & steering box
• It is suitable general lubricating purpose
• Recommended Heavily loaded gear, fitted to all types of vehicles
• Best Suitable all steel & steel alloys

• Presence of carefully selected additives ensures you better gear life
• High viscosity index gives guaranteed performance even at higher temperature
• Very good resistance to oxidation & wear
• Excellent thermal stability
• Good reserve of alkalinity to prevent acid attack

» Technical Specifications

• Specially made for CNC chuck, for high load & high speed applications even in the presence of water
• It is suitable for all types of Bearings, moving, sliding & rotating parts, pumps; extractors, fans vibrators
• It is suitable for ferrous as well as non ferrous materials & working temperature range from 0^oC to 280^oC
• Mechanisms subjected to steam in paper industry, Chain and roller paths in packing industry, for hot and cold water taps
• Always avoid the contamination of grease by dust &/or dirt while application, clean the part before application for best results
• Can be used for open gear, which are at high load & low speed

• Very good mechanical stability, even in the presence of salty water
• Very good resistance to ageing, oxidation and corrosion
• Gives very good rust & corrosion protection
• Gives better resistance to water wash-out, mild alkaline & acidic solution
• Can withstand at high vibration and speed
• Reduces greasing frequency
• Good pump ability

• Specially made for high load, high temperature application
• It is perfectly suitable for oven doors, conveyors passing through oven, elevators under high load
• Recommended Light to high load in industries like sugar, Cement & steel
• It gives excellent rust protection even in the presence of salty water, heavy dust
• It gives very good protection against wear, no matter for the shock load also
• Best Suitable all steel & steel alloys

• Gives very good bearing or moving parts life
• High Flash point gives guaranteed performance even at very high temperature
• Very good resistance to oxidation & wear
• Provides excellent wear protection even shock load is there
• Excellent thermal stability
• Presence of polyuria reduces lubrication intervals
• No burn marks on the lubricated parts at very high temperature
• Good reserve of alkalinity to prevent acid attack
• Free from lead & other harmful materials, hence operator friendly

• It is suitable for all types of Bearings, moving, sliding & rotating parts.
• It is suitable for universal joints, Knuckle joints.
• It is suitable for ferrous as well as non ferrous materials.
• Suitable for rolling mills application.

• Very good mechanical stability, even in the presence of salty water
• High Drop point
• Odor free performance, hence keeps shop-floor environment healthy
• Gives very good rust & corrosion protection
• Gives better resistance to water wash-out
• Operator & environment friendly
• Good pump ability

• It is suitable for all types of Bearings, moving, sliding & rotating parts
• It is suitable for universal joints, plain bearings
• It is suitable for ferrous as well as non ferrous materials
• Suitable for big press machines, forging hammers & plastic molding machines

• Very good Mechanical stability, even in the presence of salty water
• High Drop point
• Gives very good rust & corrosion protection
• Gives better resistance to water wash-out
• Operator & environment friendly
• Good pump ability Characteristics
• Gives good lubrication for long time
• Help in reducing of noise

• It is suitable for all types of Bearings, moving, sliding & rotating parts.
• It is suitable for universal joints, plain bearings.
• It is suitable for ferrous as well as non ferrous materials.
• Suitable for rolling mills application.

• Very good Mechanical stability, even in the presence of salty water.
• High Drop point.
• Odor free performance, hence keeps shop-floor environment healthy.
• Gives very good rust & corrosion protection.
• Gives better resistance to water wash-out.
• Operator & environment friendly.
• Good pump ability Characteristics.

• Used in hydraulic pumps, hydraulic systems operating under medium to very high pressure.
• It can be used in gear boxes, vacuum pump lubrication, depending upon the manufacturers ISO VG specifications.
• It is can be used for lubrication of plain & roller bearings operation under moderate pressure & temperature.
• Its good viscosity index helps you in maintaining the temperature of your oil.

• Very good Anti-wear properties help you in increasing the equipment life.
• Resistance to Hydrolysis & Oxidation helps in extending the life of Oil.
• Noise free performance, due to very good air release properties.
• Gives very good rust protection.
• Good filtration ability in presence of water also.
• Reduces down time by improving Equipment life.

Technical Specifications