Ardent Fire India Private Limited

Khushkhera, Bhiwadi, Rajasthan

INERGEN is a mixture of nitrogen, argon and carbon dioxide, and has been specially developed to provide fire protection for sensitive electrical and electronic instruments and equipment.
INERGEN extinguishes fire by reducing the oxygen level in a room to below 15% (the point at which most combustibles will no longer burn). Simultaneously the patented carbon dioxide in INERGEN protects anyone that may be trapped in the fire area from the effects of the lowered oxygen levels. Further, it does not produce a heavy fog upon discharge so escape routes remain completely visible.
These Gas suppression systems are extensively used in electronic data protection and electrical system switch environments. Systems comprise of electrical detection linked to a bank of cylinders where the gas is stored ready for discharge into the fire area. Inergen Clean Agent Fire Suppression Systems are completely environmentally friendly and safe to use in enclosed areas where people may be present. Inergen is zero ozone depleting, zero global warming, and has a zero atmospheric lifetime. It is an environmentally green three dimensional fire suppression agent replacing Halon 1301.

The fire suppression is performed by lowering the oxygen content of the protected area to a point sufficient to sustain human life but insufficient to support combustion. Typical applications for Inergen are computer centers, tape storage centers, telephone exchanges, remote cellular sites, process control rooms, medical diagnostic rooms and MRI scanners and others which require a non-water based extinguishing agent that:

• Is electrically non-conductive
• Is safe for use in human occupied facilities
• Would not damage sensitive electronic equipment
• Has zero ozone depletion, zero global warming, and zero atmospheric lifetime

The Inergen discharges through specially designed nozzles. To minimize turbulence in the protected area Inergen nozzles are fitted with discharge deflectors. It is stored in cylinders near the facility under protection.

Fire Hydrant System that we provide is used to protect entire plant/building/risk. Fire Hydrant System that we offer comprises of network of underground & above ground piping throughout the protected area. This piping network pressurized with water using pumps is connected to reliable source of water. We can provide Fire Hydrant System at competitive prices. 

Our Fire Hydrant System Consist Of :

• Jocky Fire Pump Set
• Main Fire Pump Set

• Diesel Fire Pump
• Above Ground & Underground Piping
• Foot valve-In case of Negative Suction of the pump
• Gate Valve
• Non Return Valves
• Priming Tank in case of Negative suction of the pump
• Branch Pipe
• Cables

• Control Panel
• Pressure Switch & Pressure Gauge
• Water monitors
• Strainers
• Hydrant valves
• Hoses
• Hose Boxes
• Air Cushion Tank
• By Pass arrangement for testing of fire Pumps sets
• Audio Indication for Starting of fire pump set

Gas Suppression Systems FM-200 (HFC-227EA) is a reliable solution based on HFC 227ea, an extinguishing agent known around the world. Built on 42-bar technology, these Gas Suppression Systems are efficient and space-saving. Whether for the valuable systems, data, people or the working environment, this Gas Suppression System provides optimum protection in case of fire and helps ensuring business continuity. The extinguishing agent of this Gas Suppression System is very effective and works at low extinguishing concentrations to protect people and assets. The extinguishing agent is chemically inert and has low electric conductivity. This Gas Suppression Systems provides ideal protection especially for areas with electrical and electronic risks of fire. Extinguishing without leaving any residue and without risking of corrosion is found in this Gas Suppression System- for example a smoldering fire in electrical switching rooms, telecommunication systems, data centers or server rooms can be checked before it spreads.

Features

• Reduces risk of downtime and helps maintain business continuity in the event of a fire
• Clean leaving no residue
• Safe for discharge into occupied spaces
• Design concentrations for 95% of its applications fall well below NOAEL levels
• Cost effective engineered system, providing maximum protection
• Sustainable technology providing an environmentally friendly solution

Technical Specifications

• FM-200 agent actively attacks the fire to extinguish flames rapidly
• Engineered system providing a fast acting 10 second discharge
• Offers full-developed, flexible design limits to fit any application environment
• Design concentrations range from 6.25% to 7.0% for Class A and Class C hazards
• Easily designed using engineered series software

Listings/Approvals

• UL Listed
• FM- Factory Mutual Approved

We offer our clients high quality Gas Leak Detector, which is known for features like high sensitivity and reliable performance. The Gas Leak Detector, offered by us, has a compact size and 220V power supply due to which, it provides a long stability and long functional life. This Gas Leak Detector also has an in-built transmitter to send immediately an alarm signal, and also has a built in battery backup.  Why Our Gas Leak Detector?

• Reliable performance
• High sensitivity
• Long life
• Economically priced

We offer high quality Night Glow Signages, giving appropriate directions and safety signals to the users to prevent various accidental cases and damages. These Night Glow Signages are made of high quality raw materials and constructed by advanced technologies. These Night Glow Signages are used in various public and commercial places to avoid many dangerous incidents. Used In :

• Sea Ports
• Airports
• Auditoriums
• Railway Platform

A Fire Alarm System, which we offer, is an active fire protection system that detects fire or the effects of fire, and as a result, provides one or more of the following

• Notifies the occupants
• Notifies persons in the surrounding area
• Summons the fire service
• Controls all the fire alarm components in a building

The detectors senses cause of fire and then give the signal through the alarm system. Fire Alarm Systems can include Alarm Initiating Devices, Alarm Notification Appliances, Control Units, Fire Safety Control Devices, Annunciator, Power Supplies and Wiring.

• VESDA aspirating System.
• Smoke Detectors (Ionization/Photo/Optical.)
• Heat Detectors (Fixed Temp/Rate of rise cum fixed temp.)

Special Detectors : Smoke & Heat Combined Detector, Linear Heat sensing cable, Laser Detector, Beam Detector, UV-Detector & IR-Detector

We are engaged in providing VESDA Systems that are air sampling based high sensitivity smoke detection systems. VESDA (very early smoke detection apparatus) comprises of an aspirated smoke detector and a network of PVC piping, which is capable of detecting fires at a very early incipient stage. These systems are deployed for mission critical areas like data centers, control rooms and data processing areas, as the first line of defense against fire situations. These are available at market leading prices.  Why Our VESDA System?

• Easily detect fire
• Minimal maintenance cost
• Easy to install
• Economically priced

NAF® S 125 is a UL Recognized and US EPA SNAP Listed gaseous extinguishing agent. NAF® S 125 Engineered Systems are UL Listed.
NAF® S 125 is suitable for use in rooms, vaults, enclosed machines, containers, storage areas and wherever fixed enclosures are present. It is an electrically non-conductive media, it can therefore be used to protect electronic and delicate equipment. After discharge NAF® S 125 does not require the clean-up of the protected enclosure, making it extremely useful in applications where damage by other extinguishing methods would be prohibitive.
NAF® S 125 has a low order of toxicity. At typical design concentrations it can be safely used to protect normally occupied areas.
The NAF S 125® formulation includes a patented additive that reduces the levels of decomposition by-products normally generated by halocarbons during extinguishment and enhances extinguishing performance (inter alia US Patent No. 6, 402, 975 and EU Patent No. 630, 278).
By weight NAF® S 125 requires the lowest concentration, making NAF® S 125 the most cost effective clean agent solution available in the market today.

They are available in 180º and 360º coverage that is suitable for total flooding systems in occupied areas. This Gas Suppression System protects areas such as computers, archives, electrical and telecommunications equipment, Server Room/Data Center, Hospitals, Petrochemical, Offshore, Airport, Laboratories, Paint Booths, etc. The typical design concentration of this Gas Suppression System is 8%, with a discharge time of 10 seconds in accordance with the UL 2166 regulations.
Discharge is via valves that have been completely designed by manufacturer and certified by the top independent agencies. This gas suppression system offers great flexibility of adaptation to all actuation systems currently on the market, and even allows combinations of several of these. This gas suppression system design incorporates elements that protect against accidental activation due to micro-seepage. All of the valves are registered through the Ministry of Industry and thus comply with an obligatory standard. The NAF S125 extinguishing systems include discharge nozzles especially designed to maximize the properties of the extinguishing agent. They are available in 180º and 360º coverage. 

Main benefits :

• 20% Gas less required in comparison of FM200 System
• Maximum reduction of fire damage / Rapid intervention
• Maximum safety in the area
• Excellent cost/benefit ratio
• Low maintenance cost
• Low space occupied / low installation weight
• Maximum safety for personnel
• Maximum flexibility of use / rapid distribution

Certificates :

• The NAF S125 are certified by the LPCB (loss prevention certification board) of England no.: 108640 / BC9933
• APCI (Cuba certification body) no : SS 4004040-1102
• Certified by the UL (Underwriters Laboratories) : UL is a non-profit independent organization that guarantees the safety of systems and components: NAF S125 has now added the UL stamp of quality to their traditional system of quality (ISO 9001: 2000). This vouches for the design of the systems (extinguishing concentration and network calculation software); the reliability of the components and the production quality - both of the components and the extinguishing agents as well.

We offer the Hose Reel System that provides immediate and continuous flow of water when the hose is deployed. The Hose Reel System provided by us is also equipped with heavy duty all-purpose ball valves and nozzles. These Hose Reel Systems are treated as one of the safest and efficient equipment, which can be made available as per the requirements of the customers. To support the fire hoses, the fire reels are made, which keep them tidy so that they can assemble for instant requirements as an aid for suppressing unexpected fires.