Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

Arcraft Plasma Equipments ( I ) Pvt Ltd

Arcraft Plasma Equipments ( I ) Pvt Ltd
location Dahisar, Mumbai, Maharashtra

gstGST : 27AADCA0505A1ZL Verified Write a Review
View Number

Our Products

  1. Welding Machinery 19 Products available
  2. Cutting Machine 3 Products available
  3. Metal Cutting Machine 3 Products available
  4. Torchlight 3 Products available
  5. Welding Rods, Electrodes & Wires 3 Products available
  6. Welding Accessories 3 Products available

  7. Cutting Machines & Equipment

    2 Products available

  8. Welding Machine Parts

    2 Products available

  9. Cnc Job Work

    2 Products available

  10. Audio Recorders, Mixers & Transmitters

    1 Products available
  11. Others Products 15 Products available

Our Products

We offer a complete product range of Plasma Transferred ARC Welding, Hardbanding Machine, ARC Welding Equipments and Plasma Welding

Gas Plasma Cutting Machines

Gas Plasma Cutting Machines
  • IGBT inverter based technology. Models from 10mm to 150mm cutting capacity in Stainless Steel.
  • Suitable also to cut Mild Steel, Aluminum, Brass, Copper and other metals. Air cooled torches up to 50mm
  • Water cooled torches from 50mm & above. Suitable to interface with Portable or Gantry type CNC profile cutting or Robotic systems.
  • Torch cable length up to 30 meters available. 100% duty cycle / OCV 260 VDC
We are offering air / gas plasma cutting machinescut stainless steel up to 150 mm thick.
View Complete Details
Ask Latest Price & Details
Welding Machine Parts

Welding Machine Parts
  • Feature Low Power Consumption , Excellent Power Factor
  • Input Supply 415VAC / 50-60Hz / 3 - Ø
  • Pilot Arc Current (A) 10 – 25
Plasma Transferred Arc (PTA) System is a high energy, inert gas welding process.Argon is basically used for arc plasma supply, powder transport and molten material shielding. It produces a very high quality deposit offering optimal protection with minimal dilution or deformation of the base material.It is a process that deposits very precise coatings of perfectly controlled alloys on mechanical parts that are subject to intense wear; significantly extending their service life.PTA technology is particularly effective in protection against corrosion, thermal shock and abrasion.A wide range of overlay alloys is available for practically any part.Some alloys are very hard; others are softer with hard abrasion-resistant particles dispersed in a matrix. Certain alloys are made to rebuild a part of required dimension while others are designed to be a final overlay that protects the work surface.
View Complete Details
Ask Latest Price & Details
Welding Inverters

Welding Inverters
  • Features Light weight & compact, Saves Power Cost, Less Power Consumption, Spatter Free Welding.
  • No Load Current 4 to 5 A
  • No Load Power Factor 0.2
  • No Load Power 400 to 500 W
  • Output Power 3.84KW

No Load Current 4 to 5 A 4 to 5 A 0.3 to 0.5 A
No Load Power Factor 0.2 0.2 0.99
No Load Power 400 to 500 W 400 to 500 W 50 to 100 W
Output Power 3.84KW 3.84KW 3.84KW
Efficiency 0.6 0.6 0.9
Input Power 6.4 KW 6.4 KW 4.27 KW
Input Power Factor 0.5 to 0.6 0.6 0.95
Input KVA 12.8  to 10.66 at 230V,1ph 10.66  at 415V, 3 ph 4.5 at 415V,
3 ph
Input Current 55 A to 46 A 14.8 A 6.3 A

  Parameter   POWER 160   POWER 200   POWER 220   POWER 300   POWER 400

POWER 400 
MIG

POWER 600 
MIG
  Input
  Input Supply

220 V, 1-Ø, 
50 Hz

440 V, 3-Ø, 
50 Hz

440 V, 3-Ø, 
50 Hz

440 V, 3-Ø, 
50 Hz

440 V, 3-Ø, 
50 Hz

440 V, 3-Ø, 
50 Hz

440 V, 3-Ø, 
50 Hz
  KVA  

4.8

  

7

  

7

  

11.9

  

17.5

  

17.5

  

26
  KW  

4.4

  

6.4

  

6.4

  

9.2

  

16.7

  

16.7

  

24.7
  Power Factor  

0.95

  

0.95

  

0.95

  

0.95

  

0.95

  

0.95

  

0.95
  Output
Max Output 
(Amp)		  

160

  

200

  

220

  

300

  

400

  

400

  

600
Current 
Range (Amp)		   3 – 160   5 – 200   5 – 220   5 – 300   5 – 400   40 – 400   60 – 600
Current 
Control		   Stepless   Stepless   Stepless   Stepless   Stepless   Stepless   Stepless
  Duty Cycle  

60%

  

60%

  

60%

  

60%

  

60%

  

60%

  

60%
  Display

Amp / Volt 
(Digital)

Amp / Volt 
(Digital)

Amp / Volt 
(Digital)

Amp / Volt 
(Digital)

 Amp / Volt 
(Digital)

Amp / Volt 
(Digital)

Amp / Volt 
(Digital)
Dynamic Arc 
Force		   0 – 100   0 – 100   0 – 100   0 – 100   0 – 100    
  Additional
Class of 
Insulation		  

H

  

H

  

H

  

H

  

H

  

H

  

H
Class of 
Protection		  

IP 23

  

IP 23

   IP 23  

IP 23

  

IP 23

   IP 23  

IP 23
  Cooling   Natural Air   Natural Air   Natural Air   Natural Air   Natural Air   Natural Air   Natural Air
Dimension W 
x L x H (mm)

195 x 390 x 
430

210 x 500 x 
320

210 x 500 x 
320

260 x 680 x 
480

340 x 570 x 
670

340 x 570 x 
670

395 x 1240 x 
795
Weight (kg) Approx  

21

  

21

  

30

  

51

  

55

  

55

  

75

Power source with HF start

Parameter POWER 160HF POWER 200HF POWER 220HF POWER 300HF POWER 400HF
Pre Flow (sec)

1 – 10

1 – 10

1 – 10

1 – 10

1 – 10
Post Flow (sec)

1 – 10

1 – 10

1 – 10

1 – 10

1 – 10
Dimension L x W x H (mm) 195 x 390 x 430 210 x 500 x 320 210 x 500 x 320 260 x 680 x 480 340 x 570 x 670
Weight (kg) Approx

21

21

30

51

55

Power source with PULSE

Parameter

POWER 160 
PULSE

POWER 200 
PULSE

POWER 220 
PULSE

POWER 300 
PULSE

POWER 400 
PULSE
Up Slope (sec)

1 – 10

1 – 10

1 – 10

1 – 10

1 – 10
Down Slope (sec)

1 – 10

1 – 10

1 – 10

1 – 10

1 – 10
Pulse Frequency (Hz)

1 – 10

1 – 10

1 – 10

1 – 10

1 – 10
Pulse Time 10 - 90% 10 - 90% 10 - 90% 10 - 90% 10 - 90%
Pre Settable Current

Yes

Yes

Yes

Yes

Yes
Dimension L x W x H (mm) 195 x 390 x 430 210 x 500 x 320 210 x 500 x 320 260 x 680 x 480 340 x 570 x 670
Weight (kg) Approx

21

21

30

51

55



































View Complete Details
Ask Latest Price & Details
Welding Manipulators

Welding Manipulators
  • Feature Heavy Duty Structure made out of fabrication steel, Extremely robust and vibration free, Highly stable and accurate motion even at low speeds
We manufacture a complete line of column and boom welding manipulators which maximize both safety and production.Column and boom are a versatile and rugged solution to obtain high lift and reach to duplicate the function of a highly skilled welder.Many variations in speeds, controls and welding equipment can be fitted to a column and boom welding manipulator.Specially engineered column and boom welding manipulators are available like; Fixed Base Column base is fixed to the groundRotating Base Column base rotates up to 180Movable Base The entire column and boom can travel on a rail track from one place to other giving 3-axis movement
View Complete Details
Ask Latest Price & Details
Column Bases

Column Bases
We manufacture a complete line of column and boom welding manipulators which maximize both safety and production.Column and boom are a versatile and rugged solution to obtain high lift and reach to duplicate the function of a highly skilled welder.
View Complete Details
Ask Latest Price & Details
Gas Profile Cutting Machine

Gas Profile Cutting Machine
BASIC STRUCTURE: Machine consists of a gantry supported on carriage on operators side & a free roller on theother. Driven by motors one each on X-axis & Y-axis. DRIVE MECHANISM: The motion along longitudinal (Y) axis is powered by digital controlled motor Panasonic orequivalent make coupled with backlash free planetary gearboxes of Panasonic or equivalent make. Thisarrangement provides smooth acceleration, deceleration & controlled profile cutting speeds.The motion along cross (X) axis is powered by digital controlled motor mounted on the mastercontrol console.
View Complete Details
Ask Latest Price & Details
Welding Rotator

Welding Rotator
  • Feature Reliable And Vibration Free
  • Brand Name Arcraft plasma
  • Capacity 1 to 160 Ton
  • Roller Width 100 to 250 mm
  • Roller Diameter 250 to 500 mm
  • Minimum Job Diameter 250 to 1000 mm
  • Duty cycle 100%
We are the leading supplier of this products.
View Complete Details
Ask Latest Price & Details
Plasma Transferred ARC Welding

Plasma Transferred ARC Welding

We are offering plasma transferred arc welding (pta)plasma transferred arc system (pta) is a high energy, inert gas welding process. Ar is basically used for arc plasma supply, powder transport and molten material shielding. It produces a very high quality deposit offering optimal protection with minimal dilution or deformation of the base material. It is a process that deposits very precise coatings of perfectly controlled alloys on mechanical parts that are subject to intense wear, significantly extending their service life.pta technology is particularly effective in protection against corrosion, thermal shock and abrasion. A wide range of overlay alloys is available for practically any part. Some alloys are very hard, others are softer with hard abrasion-resistant particles dispersed in a matrix. Certain alloys are made to rebuild a part to a required dimension while others are designed to be a final overlay that protects the work surface.
View Complete Details
Ask Latest Price & Details
CNC Profile Cutting Machine

CNC Profile Cutting Machine
₹ 2.10 Lakh - ₹ 3 Lakh /piece Get Latest Price
  • Min. Order (MOQ) 1 Piece
  • Country of Origin India
  • Voltage 220V
  • Certification ISO 9001:2008
  • Application Cnc Cutting Machine
  • Weight 100-1000kg
  • Condition New
  • Automatic Grade Automatic
  • Warrenty 1 Year
  • Type Portable
  • Brand Name ARCRAFT PLASMA
  • Rated Power 1-3kw
  • Automatic Grade Yes
  • After-Sales Service Provided Yes
  • Max Cutting Thickness 0.5 to 80mm Gas OR plasma as per machine capacity
  • Max Cutting Width 1500 X 2500 mm
  • Frequency 50 Hz

Portable CNC Plasma Cutting Machine is a compact, rigid and economical solution for Metal Cutting

Features:

  • Tailored track provides zero-noise, high-intensity, high-speed and high precision features
  • CNC interface design is very user-friendly which makes the machine easy to learn and Easy to operate
  • Equipped with functions of portable CNC cutting and can cut SS, MS & Brass Plates
  • Enable the conversion of the CAD into the program file which can be transmitted to the main machine by USB to cut into any shapes
  • Flame cutting & plasma cutting can be done on the same machine
  • English Language is ready to use
  • Can automatically memorize and restore when power is off
  • Plasma THC (torch height control) device function: - Automatically adjusts the height of the torch according to the feedback of the plate high changes, THC can protect the Torch from damaging the torch & increase the Nozzle & Electrodes
  • With status indication device
  • With positioning functions of protective cover, proximity switch and dual-speed
  • With PWM control mode with Kerf cutting.

Additional Information:

Payment Terms :

Packaging Details : Wooden

Delivery Time : Ex Stock

View Complete Details
Ask Latest Price & Details
Plasma Cutting Consumables

Plasma Cutting Consumables
₹ 80 - ₹ 800 /each Get Latest Price
  • Min. Order (MOQ) 10 Piece
  • Country of Origin India
  • Material Metal
  • Diameter 10-20mm, 20-30mm, 30-40mm, 40-50mm
  • Certification ISO 9001:2008 Certified
  • Application Cutting Industry
  • Feature Accuracy Durable, High Quality
  • Surface Finishing Polished
  • Material Copper / Brass, Ceramic
  • Why do you need this Cutting torch
  • Consumable Type Torch, Spare Part
  • Brand Name Arcraft plasma
  • Packaging type Box
  • Usage Plasma Consumption

Plasma cutting consumable mainly

Electrode

Nozzle

Gas Distributor / Gas Swirl

Electrode Holder / Contact Tube

Front Cap / Shield.

Suitable for Air plasma or Gas plasma

Air cooled or Water cooled

Additional Information:

Packaging Details : Cardboard

View Complete Details
Ask Latest Price & Details
Welding Positioner / Turn Table

Welding Positioner / Turn Table
  • Country of Origin India
  • Type Welding Table
  • Material Steel
  • Shape Square
  • Certification ISO9001
  • Application Industrial
  • Condition New
  • Power Source Electric
  • Brand Name Arcraft Plasma
  • Model PS203
  • Rotation Speed 0 - 8 rpm
  • Payload Capacity 20 (Kg)
  • Faceplate Diameter 300 (mm)
  • Tilting angle 0 - 90 degree
  • Power supply 220-240 VAC / 1ph / 50-60Hz
View Complete Details
Ask Latest Price & Details
Gas Torch

Gas Torch
  • Cutting Capacity 70mm
  • Gas Oxygen Acetylene or LPG
High Low gas pressure change with Toggle switch on the operators console.Ball Screw motor driven torch up down mechanism for Z-axis.Easy o access set of regulars for gas pressure setting.Ease, Smooth & Clean Piercing .Manual gas control valves on each torch for preheat oxygen & adjust set the flame.Flash back arrestors provided on cutting stations for safety of the machine.
View Complete Details
Ask Latest Price & Details
Welding Automation

Welding Automation
with years of research and development we are now countrys no. One plasma welding manufacturer with vast experience in welding of stainless steels, inconel, titanium and other exotic metals.

applications and user industries

  • aerospace and space industries
  • cryogenics
  • foodstuff and chemical industries
  • machine and plant construction
  • automobile
  • railway
  • ship construction
  • tank equipment and pipeline construction etc.
  • plasma arc welding (paw)is an advanced version of the tungsten inert gas (tig) welding process.
  • the electric arc is formed between an electrode (which is always made of tungsten) and the work-piece.
  • the key difference from gtaw is that in paw by positioning the electrode within the body of the torch the plasma arc can be separated from the shielding gas envelope.
  • actually all welding arcs are (partially ionized) plasmas but, the one in plasma arc welding is constricted arc plasma.
  • the constriction increases the temperature of the arc and also gives it the shape of a fine beam.
  • this enables welding at high speed, greater penetration, narrow haz (heat affected zone) and minimum heat input to the job.
  • current and gas down slope- programmable current and gas down slope available for automatic closing of key hole during mechanized welding
  • igbt inverter based with analog/digital controls & integrated hf arcing systemthat tremendously increases its efficiency and switching characteristic
  • sensitivity- less sensitive to changes in arc length
  • increased consumable life- recessed electrode reduces the possibility of tungsten inclusions in the weld and can substantially increase the period between electrode dressings resulting in increased life
  • more productive- weld in a single pass up to 6 mm plates in square butt position and 10 mm plates in only two passes
  • low degree of deformation- keyhole mode of welding gives smaller heat affected zone resulting in reduced strength loss at the joint for heat treated metals, promotes less grain growth which gives better ductility
  • less embrittlement- reduced weld time results in less embrittlement by carbides and complex inter-metallic compounds for stainless steel and super alloys
  • less residual stress- equalization of distortion stresses results in less residual stress
  • reduced porosity- less filler metal required in keyhole mode significantly reduces porosity
  • customization of technical features possible

Model PW 100 PW 150 PW 200 PW 400
Input
Supply (V) 220 +/- 10% 415V +/- 10% 415V +/- 10% 415V +/- 10%
Phase / Freq. (Hz) 1 – Ø / 50 – 60 3 – Ø / 50 – 60 3 – Ø / 50 – 60 3 – Ø / 50 – 60
Input KVA 4.5 7.0 8.9 17.8
Input KW 3.8 6.5 8.5 17.0
Power Factor 0.95 0.95 0.95 0.95
Output
Max Current 100 150 200 400
Current Range (A) 5-100 5-150 10-200 10-400
Current Control (A) Stepless Stepless Stepless Stepless
Duty Cycle (%) 100 100 100 100
Display (A/V) Digital Digital Digital Digital
Pulsing
Base Current (A) 5 – 100 5 – 150 10 – 200 10 – 400
Peak Current (A) 5 – 100 5 – 150 10 – 200 10 – 400
Pulse Freq. (Hz) 1 – 10 1 – 10 1 – 10 1 – 10
Pulse Duty (%) 10 – 90 10 – 90 10 – 90 10 – 90
Up Slope (Sec) 0 – 10 0 – 10 1 – 10 1 – 10
Down Slope (Sec) 0 – 10 0 – 10 1 – 10 1 – 10
Pre Flow (Sec) 0 – 10 0 – 10 1 – 10 1 – 10
Post Flow (Sec) 0 – 10 0 – 10 1 – 10 1 – 10
Pre Settable Current Yes Yes Yes Yes
Pilot Arcing
High Frequency Electronic Electronic Electronic Electronic
Current 5 5 10 10
Trip Auto Auto Auto Auto
Additional
Class of Insulation H H H H
Power Source Air Cooled Air Cooled Air Cooled Air Cooled
Torch Cooling Water Cooled Water Cooled Water Cooled Water Cooled
Dimensions W x L x H (mm) 490 x 660 x 670 490 x 660 x 670 700 x 685 x 920 700 x 685 x 920
Weight (Kg) 75 125 125 145
View Complete Details
Ask Latest Price & Details
CNC Gas Cutting Machine

CNC Gas Cutting Machine
₹ 5 Lakh /piece Get Latest Price
  • Brand Name Arcraft
  • Cutting Width 1 to 5 meters in steps of 0.5 meter
  • Cutting Length 1 to 30 meters in steps of 1 meter
  • Cutting Head GAS and / or PLASMA
  • Cutting Stations Single / or Multiples

Machine consists of a gantry supported on carriage on operators side & a free roller on the other. Driven by motors one each on X-axis & Y-axis. The motion along longitudinal (Y) axis is powered by digital controlled motor Panasonic or equivalent make coupled with backlash free planetary gearboxes of Panasonic or equivalent make. This arrangement provides smooth acceleration, deceleration & controlled profile cutting speeds. The motion along cross (X) axis is powered by digital controlled motor mounted on the mastercontrol console.

View Complete Details
Ask Latest Price & Details
SS Sheet Cutting Machine

SS Sheet Cutting Machine
  • Input Voltage: 415 VAC + / - 10%
  • Voltage 220V
  • Open Circuit Voltage: 350 VDC
  • Load Voltage: 180 VDC

ICEM Ltd based in Thane is a leading manufacturer of Dished ends established since the last 30 years and today supplies dished ends to the largest fabricators in India and abroad. In February 2003 ICEM received an export order for 4 dished end to be fabricated out of 72 mm, 75mm, 82mm and 88 mm thick stainless steel plates. The min dia was 4570mm and 5340mm weighing 15 tons and 25 tons respectively. The thickness and size of the plates was so high so as to completely rule out forming the dished end from a single plate. The chosen mode of fabrication was therefore to cut the petals and the round plate from individual plates form it to the desired shape (radius) in the power presses and then weld it together.

View Complete Details
Ask Latest Price & Details
Plasma Cutting Torch

Plasma Cutting Torch

Available in air and water cooled type.Hand held and mechanized.Available in different range to cut from 10mm to 150mm thick plates
View Complete Details
Ask Latest Price & Details
Welding Strip

Welding Strip
  • Features Only half of dilution from base material due to less penetration., Lower arc voltage., High amperage and current density.
  • Strip width 90, 120, 150 mm
Strip claddiing is a widely used process for overlaying on material like SS on carbon steel , Low alloy steel etc and also for hardfacing various components like rolls , valves wear plates.
View Complete Details
Ask Latest Price & Details
Turntable

Turntable
Heavy Duty constructionAC geared motors with VFD ensures smooth and steady rotation ratesRotation speeds are infinitely variable in both forward and reverse directions .Taper roller bearings ensure a steady weld ground .Encoder mounting facility available for automation needsOptions available for hands free operation
View Complete Details
Ask Latest Price & Details
Air Plasma Cutter

Air Plasma Cutter
  • Features Excellent Power Factor, Stepless Power Control
  • Max. OCV Volt 260
  • Duty Cycle % 100
PlasmaCutting Machine consist of Power source with controls, Water Re-circulating system if required and a well designed Torch. The basic principle is that the arc formed between the electrodes and the work piece is constricted by a fine bore, copper nozzle. This increases the temperature and velocity of the plasma emitting from the nozzle. The temperature of the plasma is in excess of 20, 000C and the velocity can approach the speed of sound. When used for cutting, the plasma gas flow is increased so that the deeply penetrating plasma jet cuts through the material and molten material is removed in the efflux plasma.
View Complete Details
Ask Latest Price & Details
Plasma Cutting Equipment

Plasma Cutting Equipment
  • Feature Powder Coated Chassis & Panel , Long Cable Length, Dross Free Cuts
  • Input Volt 380/415
  • Max. OCV Volt 260
PlasmaCutting Machine consist of Power source with controls, Water Re-circulating system if required and a well designed Torch. The basic principle is that the arc formed between the electrodes and the work piece is constricted by a fine bore, copper nozzle. This increases the temperature and velocity of the plasma emitting from the nozzle. The temperature of the plasma is in excess of 20, 000C and the velocity can approach the speed of sound. When used for cutting, the plasma gas flow is increased so that the deeply penetrating plasma jet cuts through the material and molten material is removed in the efflux plasma.
View Complete Details
Ask Latest Price & Details
CNC Air Plasma Cutting Machine

CNC Air Plasma Cutting Machine
₹ 1 Lakh - ₹ 8 Lakh /piece Get Latest Price
  • Min. Order (MOQ) 1 piece
  • Country of Origin India
  • Brand Name Arcraft
  • Certification ISO 9001:2008
  • Weight 40 Kg
  • Color Blue
  • Condition New
  • Automatic Grade Automatic, Semi Automatic, Manual
  • Warrenty 1 Year
  • Type Portable
  • Voltage 415vAC

Plasma Cutting Machine consist of Power source with controls, Water Re-circulating system if required and a well designed Torch. The basic principle is that the arc formed between the electrodes and the work piece is constricted by a fine bore, copper nozzle. This increases the temperature and velocity of the plasma emitting from the nozzle. The temperature of the plasma is in excess of 20, 000C and the velocity can approach the speed of sound. When used for cutting, the plasma gas flow is increased so that the deeply penetrating plasma jet cuts through the material and molten material is removed in the efflux plasma.

Additional Information:

Payment Terms :

View Complete Details
Ask Latest Price & Details
Parting Machine

Parting Machine
  • Clean Cut (mm) 6
PlasmaCutting Machine consist of Power source with controls, Water Re-circulating system if required and a well designed Torch. The basic principle is that the arc formed between the electrodes and the work piece is constricted by a fine bore, copper nozzle. This increases the temperature and velocity of the plasma emitting from the nozzle. The temperature of the plasma is in excess of 20, 000C and the velocity can approach the speed of sound. When used for cutting, the plasma gas flow is increased so that the deeply penetrating plasma jet cuts through the material and molten material is removed in the efflux plasma.
View Complete Details
Ask Latest Price & Details
Plasma Cutting Machine

Plasma Cutting Machine
  • Speciality Stepless Current Control With Current Preset Facility, Contact Less Pilot Arcing With Built In HF Circuit, Extended Life Of Torch And Consumables.
  • Phase 3-Phase
  • Packaging Type Carton Box
  • Operates on Input supply 380 - 415 VAC
  • Frequency 50-60 Hz.
View Complete Details
Ask Latest Price & Details
Submerged ARC Welder

Submerged ARC Welder
An arc is maintained between the end of a bare wire electrode and the work. As the electrode is melted, it is fed into the arc by a set of rolls, driven by a governed motor. Wire feed speed is automatically controlled to equal the rate at which the electrode is melted, thus arc length is constant (similar to MIGMAG - constant voltage). The arc operates under a layer of granular flux, hence submerged arc. Some of the flux melts to provide a protective blanket over the weld pool. The remainder of the flux is unaffected and can be recovered and re-used, provided it is dry and not contaminated.
View Complete Details
Ask Latest Price & Details
TIG Welding Torch

TIG Welding Torch
  • Feature Fully machined construction to precise standards., Torch type - Hand torch & Machine torch
Straight head compatible with any CNC cutting machine.Withstands heavy duty operation even in adverse environment.Increases consumables life and is efficient for lower cost of cutting
View Complete Details
Ask Latest Price & Details
Welding Turning Roll

Welding Turning Roll
  • Features Heavy Duty Structure made out of fabrication steel, Extremely robust and vibration free, Stress relieved and precision machine
  • Supply input 380 - 415 VAC / 3-Phase / 50-60 Hz
Welding Rotators are probably the most versatile and usefull positioning equipment in a fabrication shop .They are mainly used to rotate or position the cylindrical jobs for circumferential welding (TIG MIG Sub Arc) .The machine consists of a Drive unit and Idler unit which can be one or more and Control panel with pendant.AC geared motors with variable frequency drive is used for stepless speed variation .The rollers are made of Steel or moulded with polyurethane as per the job requirement.
View Complete Details
Ask Latest Price & Details
Plasma Cutting Nozzle

Plasma Cutting Nozzle
The orifice in a torch cutting nozzle is designed to constrict the arc to a specific diameter without the arc touching the nozzle. The plasma gas provides a thin boundary layer of cool gas between the arc and the nozzle. If the current level is to high or gas flow is to less the arc may contact the cutting nozzle causing a double arc which will damage the nozzle by increasing its diameter disproportionately. Thus proper constriction will not be achieved resulting in a poorly focused arc and a bad cut finish. If a nozzle is gouged on the inside or outside or if the hole is worn out of round it should be replaced--otherwise it may be reusable. When the nozzles wear out cut quality deteriorates . Gouges on the inside indicate that too high current or inadequate air flow was used. Touching the job , piercing or cutting too fast can damage the nozzle from the outside .
View Complete Details
Ask Latest Price & Details
Wire Feeder Machine

Wire Feeder Machine
Precise and controlled addition of filler metal in TIG Welding .Helps weld parameters duplication eliminating welder skill .Dual Groove Drive Roll system accepts multiple wire sizes.Eliminates TIG rod stub loss .Cabinet encloses filler wire spool ensuring cleanliness.Makes fully automatic TIG welding possible.Results are consistent and high quality welds
View Complete Details
Ask Latest Price & Details
Plasma Cutting Electrodes

Plasma Cutting Electrodes
Every time an arc is struck the electrode receives a high current surge that brings it from a cold state to an extremely hot state very quickly. The ionized plasma gas flowing past the electrode is full of charged particles . These particles pull away atoms from the hot surface of the electrode which wears away the emitting element and creates a pit in the surface. The number of starts and stops is more important than actual cutting time in establishing the life of the electrode. It is important to keep an eye on your consumables to know how to evaluate when they need changing. To tell if an electrode is spent, check the pit in the electrode element (the element is the silver-colored insert held in the copper: hafnium for air and O2, tungsten for N2 or Ar-H2). Generally, the pit should not exceed 2.5mm for air and O2 and 3.2mm for N2 or Ar-H2. Electrodes should be changed in time to prevent possibly serious damage to the torch if the electrode bursts inside.
View Complete Details
Ask Latest Price & Details
Inverter Welder

Inverter Welder
AC electrodes are frequently operated with the simple, single phase transformer with current adjusted by means of tappings or sliding core control. DC rectifiers and ACDC transformer-rectifiers are controlled electronically, for example by thyristors. A new generation of power sources called inverters is available. These use transistors to convert mains AC (50Hz) to a high frequency AC (over 500 Hz) before transforming down to a voltage suitable for welding and then rectifying to DC. Because high frequency transformers can be relatively small, principal advantages of inverter power sources are undoubtedly their size and weight when the source must be portable. Electrode holder and cables The electrode holder clamps the end of the electrode with copper contact shoes built into its head. The shoes are actuated by either a twist grip or spring-loaded mechanism. The clamping mechanism allows for quick release of the stub end. For efficiency the electrode has to be firmly clamped into the holder, otherwise poor electrical contact may cause arc instability through voltage fluctuations. Welding cable connecting the holder to the power source is mechanically crimped or solderedIt is essential that good electrical connections are maintained between electrode, holder and cable. With poor connections, resistance heating and, in severe cases, minor arcing with the torch body will cause the holder to overheat. Two cables are connected to the output of the power source, the welding lead goes to the electrode holder and the current return lead is clamped to the workpiece. The latter is often wrongly referred to as the earthlead. A separate earth lead is normally required to provide protection from faults in the power source. The earth cable should therefore be capable of carrying the maximum output current of the power source.
View Complete Details
Ask Latest Price & Details
Plasma Cutter Consumables

Plasma Cutter Consumables
There are several signs of worn consumables; the experienced operator can often tell by sound or color of the arc or subtle changes in torch height that indicate parts wear. However, the best way to judge the condition of the torch parts is to periodically check the cut edge quality of the metal, and check the torch parts when the cut begins to deteriorate. Keep a record of the average parts life over time (in number of starts or arc-on time) and develop guidelines for expected parts life based on the amperage, material and thickness.Once average parts life is established the operator will know when to check and or replace the parts--preventing a catastrophic failure. Consumable life in air plasma cutting depends on various factors including cutting amperage, cutting speed, air quality, humidity, air pressure and operator skill.
View Complete Details
Ask Latest Price & Details
Tig Welder

Tig Welder
Tungsten inert gas (TIG) welding became an overnight success in the 1940s for joining magnesium and aluminium. Using an inert gas shield instead of a slag to protect the weldpool, the process was a highly attractive replacement for gas and manual metal are welding. TIG has played a major role in the acceptance of aluminium for high quality welding and structural applications. The process may employ direct current with positive or negative electrode or alternating current. In general, ac is preferred for welding aluminum and magnesium. Direct current electrode negative is preferred for welding most other materials and for automatic welding of thick aluminum. Thin magnesium sometimes is welded with direct current electrode positive. When ac is used with argon shielding, an arc cleaning action is produced at the joint surfaces on aluminum and magnesium. This cleaning action removes oxides and is particularly beneficial in reducing weld porosity when welding aluminum. When using dc, helium may be used as the shielding gas to produce deeper penetration. However, stringent precleaning of aluminum and magnesium parts is required with helium shielding. Argon and helium mixtures for gas shielding can provide some of the benefits of both gases. Regardless of polarity, a constant current (essentially vertical volt-ampere characteristic) welding power source is required. In addition, a high-frequency oscillator is generally incorporated in power sources designed for GTAW. High-frequency can be employed with dc to initiate the arc instead of touch starting to minimize tungsten electrode contamination. Normally, the high frequency is turned off automatically after arc ignition. The high frequency power is normally operated continuously with ac to maintain ionization of the arc path as the arc voltage passes through zero.
View Complete Details
Ask Latest Price & Details
Hardbanding Machine

Hardbanding Machine

We are offering hardbanding machine with power source. simplified control panelautomatic step over systemprogram stop on number of bandsoscillation system (slide type 1-25 mm) with variable speed. 450 amp power supply (lincoln electric)w ire feeder (lincoln electric)unit is equipped to weld 1/16 (1.6mm) thru 3/32 (2.4mm) wirescross slide (x axis 500 mm & z axis 500 mm)hollow barrel chuck with 10 (254 mm) id hole. chuck size options available 8.66, 10 & 12.6spindle speed is 0.2 to 2 rpm heavy duty gmaw torchoptional submerged arc setupoptional tilting unitoptional air plasma gouging & induction heating system
View Complete Details
Ask Latest Price & Details
CNC Plasma Cutter

CNC Plasma Cutter
Automation available with trolley with rail and profile cutting systems.One can adjust the speed of machine according to the thickness of the cutting plate with speed controller nob.This machine can cut the plates in straight direction and also cut in round shape with the help of circle cutting attachment.Advanced automation available with CNC cutting systems
View Complete Details
Ask Latest Price & Details
Welding Positioner

Welding Positioner
₹ 50,000 - ₹ 5 Lakh /Set Get Latest Price
  • Min. Order (MOQ) 1 Set
  • Brand Name ARCRAFT PLASMA
  • Driven Type Electric
  • Color Blue
  • Condition New
  • Automatic Grade Automatic
  • Certification ISO 9001:2008
  • Voltage 220V, 440V
  • Type Welding Positioner
  • Warranty 1 Year
  • Country of Origin India
  • Features Heavy Duty Structure made out of fabrication steel, Ergonomically designed, reliable and vibration free, Suitable for interfacing with NC or CNC controllers

Positioners provide steel fabrication shops a versatile and productive means for placing bulky fabrication jobs in the downhand position. This reduces handling time and frequent use of crane. The positioners table rotate at accurate and constant variable speeds and tilt with a high C.G. load rating and can be conveniently used for circumferential welding, saw and strip cladding, downhand position welding and assembling of intricate assemblies and many more applications.

View Complete Details
Ask Latest Price & Details
ARC Welding Equipments

ARC Welding Equipments
  • Features Current and Gas down Slope, Sensitivity, Increased Consumable Life
  • Power Factor 0.95
  • Current Control (A) Stepless
The electric arc is formed between an electrode (which is always made of tungsten) and the work-piece.The key difference from GTAW is that in PAW by positioning the electrode within the body of the torch the plasma arc can be separated from the shielding gas envelope.Actually all welding arcs are (partially ionized) plasmas but, the one in plasma arc welding is constricted arc plasma.The constriction increases the temperature of the arc and also gives it the shape of a fine beam.This enables welding at high speed, greater penetration, narrow HAZ (heat affected zone) and minimum heat input to the job.
View Complete Details
Ask Latest Price & Details
Water Chiller

Water Chiller
  • Capacity 1 Ton to 5 Ton
  • Flow Rate 5 lpm
  • Outlet 10 – 25 °C
  • Input Voltage 415 VAC
  • Tank Capacity 25 ltrs, 60 ltrs, 200 ltrs, 300 ltrs
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us