We are bracketed among the distinguished Manufacturers and Suppliers of Pelton Wheel Turbine Test Rigs. Our unit shows the construction and working of Pelton Wheel Turbine. It consists of Pelton wheel rotate by the jet of water supplied from centrifugal pump. Rope break dynamometer is used to measure the output of turbine. Pressure Gauge and Orificemeter are used to measure the input of turbine

 

Specifications :

• This Pelton Turbine Test Rig 65mm size to develop 2 HP at 1000 RPM with a flow of about 450 Ipm at 30 meters supply head-Supply pump set suitable for supplying water to the above turbine Monobiock Centrifuge) limp  -  (5 HP, 3 Phases, 440V)
• Pump Size  -  Suction size 50mm & Delivery size 40mm
• Pump Discharg  -  420 LPM
• Delivery Head  -  27 meter
• RPM  -  3000 RPM

Sump Tank :

• MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 650 Ltr.
• Runner coupled to pelton wheel. Rope Bake Dynamometer is used to measure the output Runner diameter 220mm.
• Spring Balance 6 kg (Salter Make).
• Discharge Butter Fly valve used to control the flow-rate of water.
• Pressure Gauge of 4.2 kg/crn2 is used to measure the pressure head.
• Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation
• Switch and starter suitable for above motor pump set mounted on the control panel board

Experimental Capabilities :

• To determine the efficiency of Turbine
• To draw the characteristics curve of Turbine

The company is a prominent Manufacturer and Supplier of Francis Turbine Test Rigs. This is a reaction turbine and this Test Rig shows the construction and working of Francis turbine. Rope brake dynamometer is used to measure the output of turbine. Pressure gauge and orifice meter are used to measure the input of turbine.

 

Specifications :

• This Francis Turbine Test Rig I00mm size to develop 2 HP at 1250 RPM with a flow of about 1400 Ipm at 15 meters supply head.
• Supply pump set lOOxlOOmm size, 1500 Ipm at 15 meter head suitable for supplying water to the above turbine.
• Monoblock Centrifugal Pump  -  (5 HP, 3 Phases, 440V)
• Pump Size  -  Suction size 80mm & Delivery size 80mm
• Pump Discharge  -  1500 LPM
• Delivery Head ; 15 meter
• RPM  -  3000 RPM

 

Sump Tank :

• MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange Within the floor space of main unit. Capacity 650 Itr.
• Rope Bake Dynamometer is used to measure the output.
• Spring balance and dead weights are used to measure the load.
• Runner Diameter 220mm.
• Discharge Butter Fly valve used to control the flow rate of water.
• Spring Balance 6 Kg (Salter Make)
• Pressure Gauge of 4.2 kg/cm2 is used to measure the pressure head.
• Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation.
• Switch and starter suitable for above motor pump set mounted on the control panel board.

Experimental Capabilities :

• To determine the efficiency of Turbine
• To draw the characteristics curve of Turbine

Get in touch with us for excellent quality Reciprocating Pump Test Rigs! We are an eminent Manufacturer and Supplier of Reciprocating Pump Test Rigs. The Reciprocating Pump Test Rig offered by us undergoes strict quality-tests before the final dispatch. Buyers are free to place bulk orders of the Test Rigs with us and we ensure their timely execution.

 

Details :

• Pump : Double acting reciprocating pump of size 25 x 20mm with air vessel to discharge about 20lpm at 20 meters total head. (make: suguna).

• Moto : 1hp, 1400rpm, single phase, 200220v, ac supply.
• Speed Variation : Stepped pulley reduction belt drive to run the pump at 3 different speeds.
• Electrical panel : Switch and energy meter for the measurement of power input.
• Sump tank : M.S. Powder coatingm.s. Frp linings.s unit of suitable size to store sufficient water for independent circulation through the unit.
• Measuring tank : M.S. Powder coatingm.s.frp linings.s unit suitable size capacity provided with standard fittings for measuring discharge of water.
• Others : Piping system consisting of pipes, pressure relief valve, gate valve and fitting with pressure gauge.

The company stands tall among the reliable Manufacturers and Suppliers of Centrifugal Pump Test Rigs. The Centrifugal Pump Test Rigs offered by us are manufactured in adherence with set industrial norms. We maintain a large stock of the Test Rigs in our spacious warehouse, to cater the bulk and urgent requirements of the buyers.

 

Details :

• Pump : A centrifugal pump of size 40mm to discharge about 250lpm at 15 total head when
• Motor : 3hp, 2880 rpm. Three phase, 400440v, ac supply. (isi marked)
• Speed Variatio : Stepped pulley belt drive to run the pump at 3 different speeds.
• Electrical panel : Starter and energy meter for the measurement of input power
• Sump tank : M.S. Powder coatingm.s. Frp linings.s unit of suitable size provided with standard fittings for measuring discharge of water.

• Others : Piping system consisting of pipes, pressure relief valve, gate valve and fitting with pressure gauge.

Owing to our rich industry experience, we have emerged as a successful Manufacturers and Suppliers of Refrigeration Test Rigs.  The Refrigeration Test Rigs offered by us are manufactured in compliance with set industrial norms. In order to cater the bulk and urgent requirements of the buyers, we maintain a large stock of the Test Rigs in our state-of-the-art warehouse. The complete range of the Test Rigs is reasonably priced by us.

We offer axial flow pump test rig.Pump:axial flow pump to discharge about 150lpm. Motor:3hp, three phase. 400440v, ac supply. Electrical pane :switch & energy meter for the measurement of power input. Sump tank:m.s. Unit with frp linings.s unit of suitable size to store sufficient water for independent circulation through the unit. Measuring tank:m.s. Unit with frp lining s.s. Unit of suitable size provided with standard fittings for measuring discharge of water. Others:piping system consisting of pipes, pressure relief valve, gate valve and fitting with pressure gauge.

We offer Kaplan Turbine Test Rig.This is a reaction turbine and this test rig shows the construction and working of Francis turbine. Rope brake dynamometer is used to measure the output of turbine. Pressure gauge and orifice meter are used to measure the input of turbine. Specifications:This Francis Turbine Test Rig 150mm size to develop 2 HP at 1250 RPM with a flow o( about 1400 Ipm at 15 meters supply head Supply pump set lOO x lOOmm size, 1500 Ipm at 15 meter head suitable for supplying water to the above turbine.Monoblock Centrifugal Pump : (5 HP, 3 Phases, 440V)Pump Size : Suction size 100mm & Delivery size 100mm Pump Discharge : 2500 LPMDelivery Head : 7 meter RPM : 3000RPM Sump Tank : Fiber glass lined MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 950 ltr.Rope Bake Dynamometer is used to measure the output. Spring balance and dead weights are used to measure the load Runner suitable Diameter & orifice meter is used to measure the flow rate of water.Discharge control valve, by-pass valve of 4' (ISI mark) used to control the flow rate of water.Spring Balance arrangement.Pressure Gauge of 10 kgcm2 is used to measure the pressure head.Rigid MS frame work compactly fitted with all the above items as a self-sufficientPackage unit suitable for operation without any foundation.Switch and starter suitable for above motor pump set mounted on the control panel board. Experimental Capabilities:To determine the efficiency of TurbineTo draw the characteristics curve of Turbine.

We offer gear oil pump test rig.Pump:a gear oil pump of size 25mm to discharge about 30lpm 2 against a maximum working pressure of 2kgcm moto :1hp, 1400rpm, single phase, 200220v, ac supply. Electrical panel:switch and energy meter for the measurement of power input sump tank:m.s. Powder coatingm.s. Frp linings.s unit of suitable size store sufficient water for independent circulation through the unit.Measuring tank:m.s. Powder coatingm.s.frp linings.s unit suitable size provided with standard fittings for measuring discharge of water. Others:piping system consisting of pipes, pressure relief valve, gate valve and fitting with pressure gauge. Service required:oilhigh speed diesel of about 60lts.

We offer hydraulic ram test rig.Hydraulic ram:hydraulic ram of size 50 x 15m to work against a delivery head up to 20m from a supply head of 2.5metres to discharge about 250lph at 10m head. Supply tank:m.s powder coatingm.s frp linings.s unit tank of suitable size with over flow arrangement for supply of water at constant head of 2.5 meters. Supply & delivery pipings:supply pipe of size 50mm & 6 meter length connecting supply tank & hydraulic ram and delivery pipe of size to deliver useful water from hydraulic ram to measuring tank. Measuring tank:m.s powder coatingm.s. Frp lining s.s unit of suitable size provided with standard fittings for measuring of useful water. Notch tank:m.s. Unit with frp linings.s unit with a brass notch plate and hook gauge for measurement of waste water. Sump tank:m.s. Unit with frp linings.s unit of suitable size for independent circulation of water through the unit. Supply pump set:0.5hp, single phase to supply water from the sump to the supply tank.

We offer venturimeter & orificemeter test rig. venturimeter & orificemeter is a device used to measure the flow in a pipe. This apparatus is used to determine the coefficient of discharge. The apparatus consists of:a centrifugal pump of 25mm x 25mm with xa hp motor (isi make)m.s sump tank 80 ltr. To collect the water.m.s measuring tank 40 ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in m.s. Measuring tank for certain time.g.i. Pipe of internal dia 25.4mm (1") and gunmetal isi mark control valve and regulating valves are used to circular water.bye-pass line is also used to regulate the discharge. This apparatus consists of metallicventurimeter. The openings from inlet and throat are connected to u tube mercury manometer to measure the head difference.The tanks are well epoxy painted inside to prevent rust hence increase the life of tank. Experimental capability:to determine the efficiency of the pump.

We are bracketed among the distinguished Manufacturers and Suppliers of Pelton Wheel Turbine Test Rigs. Our unit shows the construction and working of Pelton Wheel Turbine. It consists of Pelton wheel rotate by the jet of water supplied from centrifugal pump. Rope break dynamometer is used to measure the output of turbine. Pressure Gauge and Orificemeter are used to measure the input of turbine

 

Specifications :

• This Pelton Turbine Test Rig 65mm size to develop 2 HP at 1000 RPM with a flow of about 450 Ipm at 30 meters supply head-Supply pump set suitable for supplying water to the above turbine Monobiock Centrifuge) limp  -  (5 HP, 3 Phases, 440V)
• Pump Size  -  Suction size 50mm & Delivery size 40mm
• Pump Discharg  -  420 LPM
• Delivery Head  -  27 meter
• RPM  -  3000 RPM

Sump Tank :

• MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 650 Ltr.
• Runner coupled to pelton wheel. Rope Bake Dynamometer is used to measure the output Runner diameter 220mm.
• Spring Balance 6 kg (Salter Make).
• Discharge Butter Fly valve used to control the flow-rate of water.
• Pressure Gauge of 4.2 kg/crn2 is used to measure the pressure head.
• Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation
• Switch and starter suitable for above motor pump set mounted on the control panel board

Experimental Capabilities :

• To determine the efficiency of Turbine
• To draw the characteristics curve of Turbine

The company is a prominent Manufacturer and Supplier of Francis Turbine Test Rigs. This is a reaction turbine and this Test Rig shows the construction and working of Francis turbine. Rope brake dynamometer is used to measure the output of turbine. Pressure gauge and orifice meter are used to measure the input of turbine.

 

Specifications :

• This Francis Turbine Test Rig I00mm size to develop 2 HP at 1250 RPM with a flow of about 1400 Ipm at 15 meters supply head.
• Supply pump set lOOxlOOmm size, 1500 Ipm at 15 meter head suitable for supplying water to the above turbine.
• Monoblock Centrifugal Pump  -  (5 HP, 3 Phases, 440V)
• Pump Size  -  Suction size 80mm & Delivery size 80mm
• Pump Discharge  -  1500 LPM
• Delivery Head ; 15 meter
• RPM  -  3000 RPM

 

Sump Tank :

• MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange Within the floor space of main unit. Capacity 650 Itr.
• Rope Bake Dynamometer is used to measure the output.
• Spring balance and dead weights are used to measure the load.
• Runner Diameter 220mm.
• Discharge Butter Fly valve used to control the flow rate of water.
• Spring Balance 6 Kg (Salter Make)
• Pressure Gauge of 4.2 kg/cm2 is used to measure the pressure head.
• Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation.
• Switch and starter suitable for above motor pump set mounted on the control panel board.

Experimental Capabilities :

• To determine the efficiency of Turbine
• To draw the characteristics curve of Turbine

Get in touch with us for excellent quality Reciprocating Pump Test Rigs! We are an eminent Manufacturer and Supplier of Reciprocating Pump Test Rigs. The Reciprocating Pump Test Rig offered by us undergoes strict quality-tests before the final dispatch. Buyers are free to place bulk orders of the Test Rigs with us and we ensure their timely execution.

 

Details :

• Pump : Double acting reciprocating pump of size 25 x 20mm with air vessel to discharge about 20lpm at 20 meters total head. (make: suguna).

• Moto : 1hp, 1400rpm, single phase, 200220v, ac supply.
• Speed Variation : Stepped pulley reduction belt drive to run the pump at 3 different speeds.
• Electrical panel : Switch and energy meter for the measurement of power input.
• Sump tank : M.S. Powder coatingm.s. Frp linings.s unit of suitable size to store sufficient water for independent circulation through the unit.
• Measuring tank : M.S. Powder coatingm.s.frp linings.s unit suitable size capacity provided with standard fittings for measuring discharge of water.
• Others : Piping system consisting of pipes, pressure relief valve, gate valve and fitting with pressure gauge.

The company stands tall among the reliable Manufacturers and Suppliers of Centrifugal Pump Test Rigs. The Centrifugal Pump Test Rigs offered by us are manufactured in adherence with set industrial norms. We maintain a large stock of the Test Rigs in our spacious warehouse, to cater the bulk and urgent requirements of the buyers.

 

Details :

• Pump : A centrifugal pump of size 40mm to discharge about 250lpm at 15 total head when
• Motor : 3hp, 2880 rpm. Three phase, 400440v, ac supply. (isi marked)
• Speed Variatio : Stepped pulley belt drive to run the pump at 3 different speeds.
• Electrical panel : Starter and energy meter for the measurement of input power
• Sump tank : M.S. Powder coatingm.s. Frp linings.s unit of suitable size provided with standard fittings for measuring discharge of water.

• Others : Piping system consisting of pipes, pressure relief valve, gate valve and fitting with pressure gauge.

Owing to our rich industry experience, we have emerged as a successful Manufacturers and Suppliers of Refrigeration Test Rigs.  The Refrigeration Test Rigs offered by us are manufactured in compliance with set industrial norms. In order to cater the bulk and urgent requirements of the buyers, we maintain a large stock of the Test Rigs in our state-of-the-art warehouse. The complete range of the Test Rigs is reasonably priced by us.

We offer axial flow pump test rig.Pump:axial flow pump to discharge about 150lpm. Motor:3hp, three phase. 400440v, ac supply. Electrical pane :switch & energy meter for the measurement of power input. Sump tank:m.s. Unit with frp linings.s unit of suitable size to store sufficient water for independent circulation through the unit. Measuring tank:m.s. Unit with frp lining s.s. Unit of suitable size provided with standard fittings for measuring discharge of water. Others:piping system consisting of pipes, pressure relief valve, gate valve and fitting with pressure gauge.

We offer Kaplan Turbine Test Rig.This is a reaction turbine and this test rig shows the construction and working of Francis turbine. Rope brake dynamometer is used to measure the output of turbine. Pressure gauge and orifice meter are used to measure the input of turbine. Specifications:This Francis Turbine Test Rig 150mm size to develop 2 HP at 1250 RPM with a flow o( about 1400 Ipm at 15 meters supply head Supply pump set lOO x lOOmm size, 1500 Ipm at 15 meter head suitable for supplying water to the above turbine.Monoblock Centrifugal Pump : (5 HP, 3 Phases, 440V)Pump Size : Suction size 100mm & Delivery size 100mm Pump Discharge : 2500 LPMDelivery Head : 7 meter RPM : 3000RPM Sump Tank : Fiber glass lined MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 950 ltr.Rope Bake Dynamometer is used to measure the output. Spring balance and dead weights are used to measure the load Runner suitable Diameter & orifice meter is used to measure the flow rate of water.Discharge control valve, by-pass valve of 4' (ISI mark) used to control the flow rate of water.Spring Balance arrangement.Pressure Gauge of 10 kgcm2 is used to measure the pressure head.Rigid MS frame work compactly fitted with all the above items as a self-sufficientPackage unit suitable for operation without any foundation.Switch and starter suitable for above motor pump set mounted on the control panel board. Experimental Capabilities:To determine the efficiency of TurbineTo draw the characteristics curve of Turbine.

We offer gear oil pump test rig.Pump:a gear oil pump of size 25mm to discharge about 30lpm 2 against a maximum working pressure of 2kgcm moto :1hp, 1400rpm, single phase, 200220v, ac supply. Electrical panel:switch and energy meter for the measurement of power input sump tank:m.s. Powder coatingm.s. Frp linings.s unit of suitable size store sufficient water for independent circulation through the unit.Measuring tank:m.s. Powder coatingm.s.frp linings.s unit suitable size provided with standard fittings for measuring discharge of water. Others:piping system consisting of pipes, pressure relief valve, gate valve and fitting with pressure gauge. Service required:oilhigh speed diesel of about 60lts.

We offer hydraulic ram test rig.Hydraulic ram:hydraulic ram of size 50 x 15m to work against a delivery head up to 20m from a supply head of 2.5metres to discharge about 250lph at 10m head. Supply tank:m.s powder coatingm.s frp linings.s unit tank of suitable size with over flow arrangement for supply of water at constant head of 2.5 meters. Supply & delivery pipings:supply pipe of size 50mm & 6 meter length connecting supply tank & hydraulic ram and delivery pipe of size to deliver useful water from hydraulic ram to measuring tank. Measuring tank:m.s powder coatingm.s. Frp lining s.s unit of suitable size provided with standard fittings for measuring of useful water. Notch tank:m.s. Unit with frp linings.s unit with a brass notch plate and hook gauge for measurement of waste water. Sump tank:m.s. Unit with frp linings.s unit of suitable size for independent circulation of water through the unit. Supply pump set:0.5hp, single phase to supply water from the sump to the supply tank.

We offer venturimeter & orificemeter test rig. venturimeter & orificemeter is a device used to measure the flow in a pipe. This apparatus is used to determine the coefficient of discharge. The apparatus consists of:a centrifugal pump of 25mm x 25mm with xa hp motor (isi make)m.s sump tank 80 ltr. To collect the water.m.s measuring tank 40 ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in m.s. Measuring tank for certain time.g.i. Pipe of internal dia 25.4mm (1") and gunmetal isi mark control valve and regulating valves are used to circular water.bye-pass line is also used to regulate the discharge. This apparatus consists of metallicventurimeter. The openings from inlet and throat are connected to u tube mercury manometer to measure the head difference.The tanks are well epoxy painted inside to prevent rust hence increase the life of tank. Experimental capability:to determine the efficiency of the pump.