Arban Industries

Roorkee, Roorkee, Uttarakhand

We are offering notch apparatus.

We offer bernoullies theorem apparatus.The apparatus is used to verify the bernoulli's theorem. The apparatus consists of:a centrifugal pump of 25mm x 25mm with vi hp motor (isi make)m.s sump tank 80 ltr. To collect the water.m.s measuring tank 40 ltr fitted with pizometer tube to measure the discharge. Damper is used to collect the water in m.s.measuring tank for certain time.g.i pipe of internal dia 25.4mm (1") and gunmetal isi mark control value and regulating valves are used to circulate water.bye-pass line is also used to regulate the discharge.The apparatus consists of a variable area duct of perpex sheet with eleven piezometer, tube (50cm height) fitted at equal distance. The duct is connected in between inlet and outlet tanks of size 20 x 20 x 60cm each.The tanks are well epoxy painted inside to prevent rust hence increase the life of tanks.Experimental capability: to verify the bernoulli's theorem experimentally.

We offer Triangular and Rectangular Notch Tank Apparatus.Notches are openings cut in metallic plates are used for the purpose of measuring the discharge in stream. This apparatus is used to measure the coefficient of discharge of notches of various shapes V-NOTCH OF ANGLE 60 RECTANGULAR Notch of 100x150mm The apparatus consists of:A Centrifugal pump of 25mm x 25mm with Vi HP Motor (ISI Make)M.S Sump Tank 40 Ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in M.S Measuring Tank for certain time.G.I pipe of internal dia 25.4mm (1") and Gunmetel ISI mark Control Valve and regulating valve are used to circulate water.Bye-pass line is also used to regulate the discharge. This apparatus consists of a rectangular tank of 80x20x20cm with rectangular opening at one end on which rectangular or V-Notch can be fitted with nuts.A pointer scale is used to measure the level of water in the tank.The tanks are well epoxy painted insided to prevent rust hence increase the life of tank.Experimental capabilities:Determination of coefficient of discharge of :90C notch.Rectangular notch.

We are engaged in offering quality-tested devices and equipment for Heat & Mass Transfer Lab. The equipment offered by us undergoes strict quality-tests based on different parameters before the final dispatch. Owing to our well-established infrastructure facilities, we are capable of meeting the varied requirements of the buyers and educational institutions.

 

Heat transfer lab :

• Thermal Conductivity of Metal Rod Apparatus
• Thermal Conductivity of Liquid Apparatus
• Stefan Boltzmann Apparatus
• Pin Fin In Natural/Forced Convection Apparatus
• Forced Convection From Horizontal Cylinder Apparatus
• Parallel Flow/Counter Flow Heat Exchanger Apparatus
• Counter Flow Heat Exchanger Apparatus
• Composite Wall Apparatus
• Lagged Pipe Apparatus
• Critical Heat Flux Apparatus
• Shell and Tube Heat Exchanger Apparatus
• Study of Drop-Wise And Film-Wise Apparatus
• Unsteady State of Heat Transfer Apparatus
• Finned Tube Heat Exchanger Apparatus
• Forced Drought Cooling Tower Apparatus
• Thermal Conductivity of Insulation Powder Apparatus
• Thermal Conduction of Liquid by Guarded Hot Plate Method Apparatus
• Natural Convection From Vertical Cylinder Apparatus
• Emissivity Measurement Apparatus
• Specific Heat of Air Apparatus
• Parallel Flow Heat Exchanger Apparatus
• Unsteady State of Heat Transfer Apparatus
• Heat Pipe Demonstrator Apparatus
• Composite Cylinder Apparatus
• Heat Conduction Apparatus
• Pool Boiling Apparatus
• Two Phase Heat Transfer Apparatus
• Finned Tube Heat Exchanger Apparatus
• Plate Type Heat Exchanger Apparatus
• U Tube Finned Heat Exchanger Apparatus
• Vortex tube Apparatus

We offer pitot tube apparatus.His apparatus is used to measure the velocity of fluid in the pipe. This apparatus is also used to measure the coefficient of pitot tube. The apparatus consists of:a centrifugal pump of 25mm x 25mm with 12 hp motor (isi make)m.s. Sump tank 80 ltr. To collect the water.m.s. Measuring tank 40 ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in m.s. Measuring tank for certain time. g.i. Pipe of internal dia 25.4mm (1") and gunmetal isi mark control valve and regulating valve are used to circulate water.bye-pass line is also used to regulate the discharge.This apparatus consists of steel pitot tube (bend through 90) fitted (1") pipe.Pressure tapings are provided on pitot tube and pipe. The pressure tapping are connectedto the inclined u tube mercury manometer to measure pressure difference.The tanks are well epoxy painted insided to prevent rust hebce increase the life of tank.

We offer metaceentric height apparatus.This apparatus is used to determine he metacentric height of a ship model under load and unload condition, (flat bottomed vessel). This apparatus consists of :a flat bottomed semi-circular shio model of size 380 x 250 x 170mm.a tank of size 60x60x30cm fitted with piezometer tube to measure the level of water. Transparent sheet is provided on the front of tank.a pointer to measure the angle of heel upto +-15.a cross bar arrangement with the provision of angling movable weights at known distance fron the vertical axis through c.g.additional five hanging weights (50 gm. Each) are provided.The tanks are well epoxy painted insided to prevent rust hence increase the life of tank.Experimental capabilities:determination of metacentric height for a flat bottomed vessel under loaded and unloaded conditions.

Backed by our team of dexterous professionals, we have emerged as a successful Manufacturer and Supplier of Stefan Boltzmann Apparatus. The Stefan Boltzmann Apparatus offered by us is manufactured using quality-tested components and the latest technology. Courtesy our brilliant logistics network, we are capable of delivering bulk orders of the Apparatus within the promised timeframe. One can obtain the Apparatus at nominal rates from us.

We offer pipe friction apparatus.This apparatus is used to measure darcy's friction coefficient (f) forgiven pipes. The apparatus consists of:a centrifugal pump of 25mm x 25mm with 12 hp motor (isi make)m.s. Sump tank 80 ltr. To collect the warer.m.s. Measuring tank 40 ltr fitted with piezometer tube o measure the discharge. Damper is used to collect the water in m.s mesuring tank for certain time.g.i. Pipe of internal dia 25.4mm (1") and gunmetal isi mark control valve and regulating valves are used to circulate water.bye-pass line is also used to regulate the discharge.this apparatus consists of a three g.i. Pipe 12", 34". The pressure tapings are provided 100cm a part on each pipe. Each tapings are connected to the mercury u tube manometer to measure head difference. Hand shuts valves are provided on each pipe to open supply in the pipe.the tanks are well epoxy painted insided to prevent rust hence increase the life of tank. experimental capabilities:to determine the loss coefficient for different type of fittings.comparison of pressure across two different types.

Our company is an established Manufacturer and Supplier of Impact Jet Apparatus. The Impact Jet Apparatus offered by us is used to verify the momentum equation experimentally. This is also used for comparison of change in force exerted due to shape of the vane for different targets (flat or curved)

The apparatus consists of :

• A Centrifugal pump of 25mm x 215mm with 1/2 HP Motor (ISI Make)
• M.S. Sump Tank 80 Ltr. to collect the water.
• M.S. Measuring Tank 40 Ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in M.S. MEASURING TANK for certain time.
• G.I. pipe of internal dia 25.4mm (1") and Gunmetal ISI mark Control Valve and regulating valve are us This apparatus is used to verify the momentum Equation experimentally. This is also used for comparison of change in force exerted due to shape of the vane for different targets (Flat or curved).
• Bye-pass line is also used to regulate the discharge.
• This apparatus consists of a Perspex cylinder of 6" (152mm) dia with two interchangeable targets (curved and plane). A nozzle of 10mm is fitted to produce jet. A scale is provided on the top to measure the displacement of plate. Five additional weights of 100 gm. Each are also provided.
• The tanks are well epoxy painted insided to prevent rust hebce increase the life of tank.

Experimental capabilities :

• To determine the momentum equation experimentally.
• Comparison of change in force exerted due to shape of the vane for different targets (flat or curved).ed to circulate water.

We are a nonpareil Manufacturer and Supplier of Reynold Apparatus. The Reynold Apparatus offered by us is used to visualize different flow conditions i.e. laminar flow, transition flow, turbulent flow, etc. Our Apparatus is also used to find out the Reynolds number. The complete range of the Apparatus is reasonably priced by us.

 

Details :

• The apparatus is used to visualize different flow conditions i.e. Laminar flow, transition flow, turbulent flow,

• To find out the reynolds number the apparatus consists of :
  • A centrifugal pump of 25mm x 25mm with 14 hp motor (isi make)
  • M.S sump tank 80 ltr. To collect the water.
  • M.S measuring tank 40 ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in m.s. Measuring tank for certain time.
  • G.I pipe of internal dia 25.4mm (1") and g.m. Isi mark control value and regulating valves are used to circulate water.
  • Bye-Pass line is also used to regulate the discharge. This apparatus consists of a perspex tube of internal dia 25mm dia x 100cm long. A needle and color dye injector tank is used to visualize the flow.
  • The tanks are well epoxy painted insided to prevent rust hence increase the life of tank.

   

Experimental capability :

• To visualize different flow conditions.
• To obtain the critical velocity

We offer free vortex apparatus.This apparatus is used to visualize the free vortex. In this aooaratus perpex pipe of dia 300mm is used.four circumferential iets have been nlaced alone the circumference of the cylinder near itsbottom which helps in the formation of free vortex.m.s sump tank of 80 ltr to collect the water.a pointer gauge is used to measure the co-ordinates of vortex at various points.a centrifugal pump of 25mm x 25mm with v4 hp motor (isi make) to make the supply from m.s. Sump tank.The tanks are well epoxy painted insided to provent rust hence increase the life tank. Experimental capability:to determine the surface profile and totel and head distribution of the forced vortex.

We offer forced vortex apparatus.This apparatus is used to visualize the forced vortex apparatus. In this apparatus :a cylindrical perpex pipe of diameter 300mm is used.a dc motor of 12 hp with thyrister control to very the speed of perpex cylindrical tank.a pointer gauge is used to measure the co-ordinates of vortex at various points.The tanks are well epoxy painted insided to prevent rust hence increase the life of tank. Experimental capability:to determine the surface profile and total head distribution of the forced vortex

We offer Strokes Law Apparatus .Cylinder Dia : 10mmHeight : 1.5 MExperimental Set-Up:The setup consists of a transparent cylinder about 100mm in diameter and 1 metersheight. A hopper with a valve is provided at the bottom of the cylinder to collect the steel ball. A vertical brass tube can be inserted through the cork at the mouth of the cylinder for releasing the steel balls.A few smooth steel balls are used for the measurement of the final velocity. Experiment:To verify strokes law and to study the variation of the drag coefficient Cd with Reynolds's number for a sphere.