Aquastic Engineering Solutions

Gms Road, Dehradun, Uttarakhand

We supply hi-tech crack displacement sensor to our esteemed clients. The crack displacement sensor analyzes the crack displacements, change of length as well as relative / absolute humidity and air temperature. The crack displacement sensor offered by us is entirely based on high-resolution crack analysis sensor system and the revolutionary digital cmosens technology. In crack displacement sensor, small shock-resistant and watertight housing combine a high resolution 12-bit crack analysis electronic. Avail the crack displacement sensor from us at market leading prices. about crack displacement sensor :

• it consists of an air temperature sensor and air humidity sensor, a risc microcontroller, memory for up to 64000 measuring values and a real-time clock into an enormously powerful analysis system.
• the fully calibrated crack sensor which can be connected to the system is characterized by especially easy handling, small dimensions, high reliability as well as high precision.
• after the fast and easy installation of the analysis sensor over the crack, the measuring system either starts automatically the measuring task previously programmed on the pc or is activated without contact via a magnetic switch.
• the data logger then records the measuring data at a freely adjustable rhythm.
• the integrated high-speed crack monitoring allows reliable and precise detection of even shortest crack vibrations. For this purpose the system analyses the crack approximately 100 times per second and registers the external values.
• together with the climate sensors, comprehensive and meaningful measuring data are available after a short while.
• the fully calibrated intelligent cmosens sensor for temperature and humidity is characterized in particular by its optimized long-time stability, high precision, reliability and extremely fast response time of less than 3 seconds.
• laborious re-calibration is not necessary, because the sensor can simply be replaced directly on site if need be.
• the batteries (aa) integrated in the data logger supply the system with power for up to two years and can be replaced easily at any time.
• the data logger is programmed and evaluated with the universal softfox software under microsoft windows 98, nt, me, 2000, xp or vista.
• after connecting the rissfox mini to the computer via a usb or serial interface cable, the system can be read out or configured immediately.
• the software offers numerous general functions like the dynamic project management, graphical data analysis, computer controlled series of measurements, dew point calculation, export functions, automatic backup, flexible zoom, and much more. Furthermore, the data logger itself can be programmed according to the needs of the user.
• for this purpose many software functions are available e.g. Setting the measurement rhythm (1 second up to 24 hours), fully automatic start-stop-operation or ring buffered data acquisition, alarm conditions for sms alarm notification, acoustic alarm or telephone alarm, min/max-detection for a consistent registration of external values, setting the system clock, precise battery test, digital serial number and much more.
• in addition to the data evaluation with the computer, it is possible to connect a flexible alarm system to the data logger.
• by this means e.g. A sms notification can be transmitted when the crack displacement exceeds a predefined value.
• it is also possible to trigger a telephone alarm, when the air temperature or humidity falls/rises below/above a specified threshold. An acoustic alarm buzzer is also available.
• the fields of application for the rissfox mini are almost unlimited and range from building monitoring and damage assessment to structural condition analysis and monument protection to preventive maintenance, research and development etc.

features :

• data memory for 16000 readings integrated (optional data memory for up to 64000 readings)
• measuring and storing rhythm (1 second to 24 hours) freely adjustable via pc software
• freely programmable fully automatic start-stop-operation or endless loop storage
• crystal oscillator controlled real-time clock and real-time calendar integrated
• measuring range of the crack sensor : 10 mm (+/- 5mm)
• extended measuring range of the crack sensor e.g. 75mm available as customized version
• resolution of the crack sensor : 2.5m = 0.0025mm = 0.0001inch
• length of the crack sensor cable : 2m (longer sensor cable up to 100m available on request)
• high-speed crack monitoring with up to 100 hz can be activated
• no mechanical torsion of the sensor, thanks to the complete decoupling of the stopper
• sensor zeroing (tara function) and system start via activation magnet
• optional: combined air temperature and humidity sensor (climate sensors) available
• no calibration of the climate sensors necessary
• measuring range of the air temperature sensor : - 20oc to 70oc
• measuring range of the humidity sensor : 0 %rh to 100 %rh (dew free)
• resolution of both climate sensors : 0.1 oc / 0.1 %rh
• measuring accuracy of the air temperature sensor :

We supply Thermofox Multisensor of superior quality to the clients. The Thermofox Multisensor offered by us supports monitoring and recording up to 10 external, flexible temperature sensors, and also an internal air temperature sensor. The Thermofox Multisensor which we provide makes it possible to capture up to 11 temperatures concurrently. Avail the Thermofox Multisensor from us in pocket friendly rates in the market. About Thermofox Multisensor :

• Eight up to 15 m long inexpensive NTC sensors can be attached directly at the socket connector of the sensor module, with two further NTC sensors being connected with the base unit.
• One sensor is inside the base unit. The keys of the data logger allow the selection of individual channels on site even without a PC and the reading of the measuring results.
• Parameters, such as the measuring rhythm, the date, the calendar or the hysteresis, can be set with the help of the PC software which is available separately.
• The software allows extensive analysis of the data on the screen, printing of the charts and of course much more besides.
• In addition to the classic temperature sensor system, it is also possible to use pairs of measuring clamps at up to 10 different places, like the Materialfox, to determine the ohmic resistance of any material (e.g. material moisture of wood or concrete).

Features :

• All-in-one system including the Thermofox Universal and an internal temperature sensor
• Memory : 4000 readings (up to 64000 readings), sufficient for several years, depending on the measuring rhythm
• When the memory is full, the oldest readings are overwritten (ring memory principle)
• Recording rhythm : one second to 24 hours, freely adjustable via our flexible Software
• Automatic min/max monitoring for the registration of extreme readings without interruption
• Flexible sensor equipment : 1 x internal sensor (-10oC to +50oC). Optional equipment: 10 x external sensors (-30oC to +120oC)
• Differential temperature measurement possible
• Crystal oscillator controlled real-time clock and real-time calender integrated
• Power supply via two standard AAA micro batteries
• Battery lifetime up to two years (see configuration). Batteries can be replaced at any time
• Measuring data preserved via EEPROM memory even without batteries
• Resolution : 0, 1oC, Tolerance : 1oC
• Dimensions : 15 x 6 x 2 cm,
• Weight : 100g incl. batteries

The pH Indicator which we offer is specially designed for water treatment and swimming pool applications where both pH and ORP need to be monitored. There are two separate adjustable set points in the pH Indicator for pH and ORP. Once the pH set point is exceeded, the appropriate LED light will come on to alert the operator of the pH Indicator. pH Indicator Features :

• LED alarm signals
• Continuous monitoring
• Displays pH and mV simultaneously
• Adjustable set points

About pH Indicator :

• Once the pH set point is exceeded, the appropriate LED light will come on to alert the operator.
• Likewise, once the ORP level drops below the set point, the red ORP light will stay on.
• HI 981406 is supplied with HI 1283 ground probe. The HI 1283 ground probe provides users with more reliable readouts by suppressing current effects, which are found in pools.
• The optional HI 2114P/2 pH electrode and HI 3214P/2 ORP electrode are designed specifically for swimming pools.
• Both probes are constructed with a specially designed fiber salt-bridge making each particularly resistant to clogging in pools.

Order Information :HI 981406-01 (115V) and HI 981406-02 (230V) are supplied with HI 1283 grounding bar, HI 70004 pH 4.01 buffer solution sachet, HI 70007 pH 7.01 buffer solution sachet, calibration screwdriver, 12 VDC adapter and instructions.

Specification

Range
pH	0.0 to 14.0 pH
mV	-999 to 999 mV
Resolution
pH	0.1 pH
mV	1 mV
Accuracy
pH	0.2 pH
mV	5 mV
Other Details
pH Calibration	manual, 1 or 2 points
Setpoint	pH: adjustable from 5.0 to 9.0 pH;ORP: adjustable from 350 to 850 mV
Alarm	2 LED's (1 for pH and 1 for ORP) light up when:pH value > setpoint and/or ORP value < setpoint
Probe	HI 2114P/2 replaceable pH electrode (not included)HI 3214P/2 replaceable ORP electrode (not included);HI 1283 potential matching pin with 2 m (6.6') cable (included)
Input Impedance	1012 Ohm
Power Supply	12 Vdc power adapter (included)
Environment	0 to 50C (32 to 122F); RH max 95%
Dimensions	165 x 110 x 35 mm (6.4 x 4.3 x 1.4")
Weight	300 g (10.6 oz.)

Accessories

Electrodes
HI 1283	Grounding Bar with 1 m (3.3') Cable
Solutions
HI 70000P	Rinsing Solution 25 x 20 mL sachets
HI 70004P	4.01 pH Buffer Solution, (25) 20 mL
HI 70007P	7.01 pH Buffer Solution(25) 20 mL sachets
HI 7020M	ORP Test Solution at 200/275 mV (@20oC)1 x 230 mL bottle
HI 7091M	Reducing Pretreatment Soluti1 x 230 mL bottle
HI 7092M	Oxidizing Pretreatment Solution1 x 230 mL bottle
HI 70300M	Electrode Storage Solution1 x 230 mL bottle
HI 7061M	General Purpose Cleaning Solution1 x 230 mL bottle
Accessories
HI 710005	Power Adapter, 115 Vac to 12 VDC, US Plug
HI 710006	Power Adapter, 230 Vac to 12 VDC, European Plug

We are a prominent ph tester supplier in india. The ph tester offered by us is a waterproof orp and temperature meter. The housing of this ph tester has been completely sealed against humidity. Furthermore, this ph tester is specially designed to float. Clients can avail the ph tester from our company at highly affordable rates in the market. ph tester features :

• waterproof and it floats!
• hannas exclusive cartridge ph and orp electrode
• battery % level at startup and stability indicator
• hold function

about ph tester :

• electrode replacement with the stainless steel round connector means there are no pins to bend or break during replacement.
• when the cloth junction becomes clogged and response time is sluggish, simply pull out 3 mm (1/8) to clear the clogging which will improve response time and stability.
• the exposed stainless steel temperature sensor on these models facilitates faster and more accurate temperature measurement.

order information :hi 98120 (orp) is supplied with hi 73120 orp electrode, hi 73128 electrode removal tool, batteries and instructions. specificationsrangeorp1000 mvtemperature-5.0 to 60.0oc / 23.0 to 140.0ofresolutionorp1 mvtemperature0.1oc / 0.1ofaccuracyorp2 mvtemperature0.5oc / 1ofother detailscalibrationfactory calibratedorp electrodehi 73120 replaceable orp electrode (included)battery type / life1.5v (4) / approximately 250 hours of continuous use; auto-off after 8 minutes of non-useenvironment-5 to 50oc (23 to 122of); rh max 100%dimensions163 x 40 x 26 mm (6.4 x 1.6 x 1.0")weight100 g (3.5 oz.) accessoriessolutionshi 7004m4.01 ph buffer solutionhi 7007m7.01 ph buffer solution1 x 230 ml bottlehi 7010m10.01 ph buffer solution1 x 230 ml bottlehi 7021morp test solution at 240 mv (@20oc)1 x 230 ml bottlehi 7022morp test solution at 470 mv (@20oc)1 x 230 ml bottlehi 70300lelectrode storage solution1 x 500 ml bottleaccessorieshi 73120spare electrode for hi 98120hi 73128tool for replacing probe

The Conductivity Indicator which we supply is ideal for agricultural, horticultural and hydroponics applications where pH and TDS levels need to be continuously monitored for optimal plant growth. This Conductivity Indicator continuously monitors and displays the values of a solution on an easy to read set of LCD's. Avail the Conductivity Indicator from us at market leading prices. Conductivity Indicator Features :

• Two parameters with a single instrument
• Advanced electrode technology
• Simple operation and maintenance
• Supplied complete and ready to use

About Conductivity Indicator :

• The HI 1286 gel filled pH electrode is replaceable and the BNC connector is protected behind a waterproof sleeve.
• The unique design of the electrode guarantees greater clogging resistance in fertilizer solutions with high concentrations of phosphate, nitrate, etc.
• TDS measurements are performed using the 4-4-2 conversion factor of 0.7 so you do not need to convert the readings.
• This model is equipped with a grounding bar to ensure highly accurate pH readings and longer electrode life.
• The HI 981404N is compact and easy to install and use making it ideal for all continuous monitoring applications.

Order Information :HI 981404N-01 (115V) and HI 981404N-02 (230V) are supplied complete with HI 1286 pH electrode, HI 7634 TDS probe, HI 1283 grounding bar, calibration solutions, screwdriver for calibration, 12 VDC adapter and instructions. SpecificationsRangepH0.0 to 14.0 pHTDS0 to 1990 mg/L (ppm)ResolutionpH0.1 pHTDS10 mg/L (ppm)Accuracy @ 20oCpH0.2 pHTDS2% F.S.CalibrationpHmanual at one or two pointsTDSmanual at one pointOther DetailsTemperature Compensationautomatic from 5 to 50oC (41 to 122oF) (TDS only)TDS Conversion Factor0.7 ppm = 1 S/cmProbesHI 1286 interchangeable pH electrode (included), HI 7634 TDS probe (fixed), HI 1283 grounding bar with 2 m (6.6) cable (included)Power Supply12 VDC adapter (included)Environment0 to 50oC (32 to 122oF), RH 95%Dimensions165 x 110 x 35 mm (6.5 x 4.3 x 1.3)Weight300 g (10.6 oz.) AccessoriesElectrodesHI 1286Spare pH Electrode for pH IndicatorsSolutionsHI 70000PRinsing Solution 25 x 20 mL sachetsHI 70004P4.01 pH Buffer Solution, (25) 20 mLHI 70007P7.01 pH Buffer Solution(25) 20 mL sachetsHI 70442P1500 mg/L (ppm) TDS Solution, (25) 20 mL SachetsHI 70039P5000 S/cm EC Solution (25) 20 mL SachetsHI 70300MElectrode Storage Solution1 x 230 mL bottleHI 7061MGeneral Purpose Cleaning Solution1 x 230 mL bottleAccessoriesHI 710005Power Adapter, 115 Vac to 12 VDC, US PlugHI 710006Power Adapter, 230 Vac to 12 VDC, European Plug

We are offering karl fischer volumetric titrator. the company has created a strong foothold in the business of supplying world class karl fischer volumetric titrator. Designed to precision, the karl fischer volumetric titrator available with us is used for moisture analysis purposes. The karl fischer volumetric titrator that we offer combines an ultra-high precision titrant delivery system with optically regulated magnetic stirring, sophisticated endpoint determination, dynamic dosing and background drift correction algorithms. Karl fischer volumetric titrator dispenses the titrant, detects the endpoint and performs all necessary calculations automatically. Widely known for accurate results and reliable performance, our karl fischer volumetric titrator is surely the right choice to rely upon. Moreover, the clients can obtain this karl fischer volumetric titrator, at most competitive prices from us. precision titrant delivery system :

• precision ground, 5 ml glass burette with ptfe plunger, ptfe burette tubing, and polyurethane tube jacketing (thermally insulating, light blocking)
• glass anti-diffusion dispensing tip
• 40, 000 step, piston dosing pump
• accurate to 0.1%
• delivers as little as 0.125 l of titrant
• clip-lock exchangeable burette system enables users to exchange reagent burettes in a matter of seconds

sealed solvent system :

• ptfe solvent tubing is resistant to harsh kf solvents and titrants
• changes to fresh solvent in a matter of seconds without opening the titration vessel
• effectively minimizes exposure to ambient humidity, reducing titrant consumption and saving time

beaker top :

• the cap and fittings are chemically-resistant
• available with quick-remove sample port plug with replaceable silicone rubber septum

anti-diffusion burette tip :

• avoids unwanted diffusion of titrant
• delivers titrant in high turbulence zone thus, ensuring rapid reaction

built-in stirrer :

• optical feedback for automatic speed control
• automatic, integrated magnetic stirrer adjustable from 200-2000 rpm
• optional external stirrer available

rechargeable indicating desiccant :

• indicates when adsorption capacity is depleted
• prevents the ingress of ambient humidity into the sealed solvent system while maintaining full titrator functionality
• regenerates at 150oc
• minimizes changes to titrant titre

ptfe bottle cap :

• chemical resistant caps and fittings
• caps fit any gl45-threaded bottle
• removable desiccant cartridges

clip-locktm exchangeable burette system :clip-lock facilitates in quick exchange of the reagent burettes to perform a different titration.The clip-locktm exchangeable burette system prevents cross contamination while reducing loss of time and reagents. Burettes simply slide out for quick exchanges, and detaching the aspiration. Also, the dispensing tubes from the titrant bottles are very easy. order information :karl fischer volumetric titrator is supplied with dual platinum pin electrode, dosing pump, 5 ml burette assembly with tubing, air pump assembly with tubing, beaker and bottle top assemblies and all fittings, desiccant cartridges (4) with indicating desiccant, stir bar, waste bottle, calibration key, usb cable, power cable, hi 900pc application, usb flash drive, quality certificate, iso 8655 burette compliance report and instruction manual binder. specificationsrange100 ppm to 100%resolution1 ppm (0.0001%)result units%, ppm, mg/g, g/g, mg, g, mg/ml, g/ml, mg/pc, g/pcsample typeliquid or soliddeterminationpre-titration conditioningautomaticbackground drift correctionautomatic or user selectable valueendpoint criteriafixed mv persistence, relative drift stop or absolute drift stopdosingdynamic with optional pre-dispensing rateresult statisticmean, standard deviationclip locktmdosing pump resolution1/40000 of the burette volume (0.125 l per dose)dosing pump accuracy0.1% of full burette volumesyringe5 ml precision ground glass with ptfe plungervalvemotor driven 3-way, ptfe liquid contact materialtubingptfe with light block and thermal jacketingdispensing tipglass, fixed position, anti-diffusingtitration vesselconical with operation volume between 50-150 mlsolvent handling systemsealed system, integrated diaphragm air pumpelectrodetypedual platinum pin, polarization electrodeconnectionbncpolarization current1, 2, 5, 10, 15, 20, 30 or 40 avoltage range2 mv to 1000 mvvoltage resolution0.1 mvaccuracy (@25c/77f)0.1 mvexternal stirrertypemagnetic, optically regulated, digital stirrerspeed200-2000 rpmresolution100 rpmperipheral devicespceasily view, transfer, print or delete methods and reports via hi900pc applicationusb flash driveeasily upgrade software or transfer methods and reports between devices using a usb drivelaboratory analytical balancers232 to connect any laboratory balanceprinterprint directly from the hi 903 to a printer via parallel portmonitorinstrument status and titrations can be viewed on a larger screen using any vga compatible external monitorkeyboardalphanumeric text can be entered using an optional ps/2 keyboardother detailsgraphic display5.7 (320 x 240 pixel) color lcdtitration methodsup to 100 (standard and user) methodsdata storageup to 100 complete titration reports and drift rate reports can be storedglp conformitygood laboratory practice and instrument data storage and printinglanguagesenglish, portuguese and spanishenclosure materialabs plastic and steelkeypadpolycarbonatepower supply-01 model: 115vac, 50/60 hz;-02 model: 230vac, 50/60 hz; operating environment10 to 40c, up to 95% rhstorage environment-20 to 70c, up to 95% rhdimensions390 x 350 x 380 mm (15.3 x 13.8 x 14.9)weightapproximately 10 kg (22 lbs.) accessorieselectrodeshi 76320dkf electrodeaccessorieshi 900100dosing pumphi 900520beaker assemblyhi 9005055 ml burette assemblyhi 9002055 ml burette syringehi 9002603-way valvehi 900522kf beakerhi 900523dispensing tiphi 900527septumhi 900528solvent port plugshi 900530titrant bottle top assemblyhi 900534waste bottlehi 900531solvent/waste bottle top assemblyhi 900532desiccant cartridge for beaker or titranthi 900533desiccant cartridgehi 900180solvent-handling pumphi 900535tubing for solvent/waste handlinghi 900536tubing for solvent-handling pumphi 900540o-ring sethi 900570aspiration tubinghi 900580dispensing tubing and fittinghi 900930rs232 cable for pc connection

we are reckoned for supplying materialfox of optimum quality. The materialfox which we offer has expandable 2-channel data logger for monitoring, recording and analyzing weight-, cm-, material-, and wood-moisture of many different materials. In the materialfox, measurements can be taken either with the cone-headed measuring probes or two alligator measuring clips, attached to the test object. about materialfox :

• the materialfox is a powerful and flexible instrument for measuring moisture and recording the moisture status of a wide range of materials. In the case of wood, the immediate readout gives the moisture content in percent (% wme = wood moisture equivalent) or a precise value of the wood's current electrical resistance.
• this makes it possible to make precise statements regarding the condition of the material.
• while measuring the material moisture, the room temperature and air humidity surrounding the material can also be measured at the same time using a "thermo-hygro-sensor".

features :

• two pairs of external alligator measuring clips can be connected
• standard cable length : 1m per channel
• external "thermo-hygro-sensor" can be connected (see also: "fire adapter")
• "cone-headed measuring probes" can be connected
• logging mode : readings are stored automatically (standard)
• button mode : readings are stored by pressing a button
• resistance / resistivity : 20 kohm to 500 mohm ( 10*log(r) )
• wood moisture of pinewood or wood moisture equivalent (wme) : 15% - 80%
• measuring and storing rhythm (1 second to 24 hours) freely adjustable via pc software
• stores 4, 000 readings (option: 64, 000), sufficient for several years, depending on the interval
• alarm output for sms alarm system, acoustic alarm system, telephone alarm system etc.
• measuring data preserved via eeprom memory even without batteries
• crystal oscillator controlled real-time clock and real-time calendar integrated
• data logger dimensions : 11 x 6 x 2 cm (h x w x d), 100g including batteries

depending on the memory equipment of the system, the active sensors as well as the selected measuring rhythm, the maximum measuring time can be calculated. Here some examples : memory capacityactive sensorsmeasuring rhythmmeasuring time 4000 readings1. Ext. Material sensor15 minutes42 days 4000 readings1. Ext. Material sensor15 minutes21 days 2. Ext. Material sensor16000 readings1. Ext. Material sensor15 minutes167 days 16000 readings1. Ext. Material sensor15 minutes83 days 2. Ext. Material sensor64000 readings1. Ext. Material sensor15 minutes667 days 64000 readings1. Ext. Material sensor15 minutes333 days 2. Ext. Material sensor

Our company is dealing in the supply of remote data transmission system. The remote data transmission system which we offer retrieves measurement data and alerts mobile. The remote data transmission system is wirelessly and fully automated worldwide via e-mail and sms. Battery-operated remote data transmission system includes modern gprs modem too. With remotefox, consumers get a powerful remote data transmission system for worldwide, mobile, and wireless retrieval of measurement data. Avail the remote data transmission system from us in excellent packaging. about remote data transmission system :

• simply connect up to two data logging systems including your extension modules (universal sensors) directly to remotefox. Users receive the ollected measurement data entirely automatically and comfortably at regular intervals as e-mail attachments. Once on the computer, users can analyze the easurement data in the same way as if they were on-premise.
• and if you ever need your measurement data urgently, one telephone call and remotefox sends them to you immediately. In addition, remotefox is equipped with two independent alarm inputs for flexible and uncomplicated alerts via sms or e-mail.
• the complete system works independently of the power grid and is operated with eight normal baby-type batteries (please order as well). This way it can send hundreds of e-mails for over a year (depending on data logger memory). If desired a power supply can be connected. Naturally, you will be alerted should power be down or batteries low.
• configuration of remotefox can be done easily and smoothly using the universal softfox software on microsoft windows 98, nt, me, 2000, xp, vista, or 7. With the help of this software you can configure the frequency of the data transmission, the e-mail recipients, and cell-phone numbers for sms alerts, a delay for the alarm inputs, the smtp server to use, and much more.

features :

• fully automated transmission of measurement data via e-mail
• start time and data transmission frequency freely configurable
• two complete data logger systems plus universal sensors can be connected e.g. 2 x thermofox universal stations incl. 2 x multi-sensor modules for 2 x internal as well as 20 x external sensors
• two inputs for e-mail and/or sms alarm (incl. Alarm delay)
• unscheduled (asynchronous) data retrieval triggered by telephone call (with power supply)
• up to 10 x e-mail recipient addresses and 10 x cell phone numbers can be defined
• high reliability as a result of alerts, status led and system test on location via magnet
• flexible configuration possible with the optional softfox analysis software
• crystal oscillator controlled real-time clock and real-time calendar
• power supply using standard 8 x type "c" baby batteries (please order as well)
• optionally available regulated 12v - power supply for continuous operation of the system
• battery capacity sufficient for up to 100 x transmissions with 64, 000 readings each
• various sim cards with gprs internet access can be used
• special antennas available upon request
• dimensions 60 x 150 x 100 mm (hxwxd), approx. 300g plus batteries

To Measure Level Eg Tank, Reservoir, Dam Etc.

we are engaged in supplying materialfox multisensor, based on latest & advanced technology. expansion module for the materialfox multisensor is designed for simultaneously monitoring and recording up to 6 or 8 material and wood moisture measuring locations. avail the materialfox multisensor from us at reasonable rates in the market. about materialfox multisensor :

• the materialfox multisensor was designed as an additional module for the materialfox and simply connects to the universal bus of the data logger.
• in conjunction with the materialfox multisensor, our data logger can be connected to a further six or eight measuring locations (depending on the material being tested), where it analyses and records the various material moisture contents.
• as with standard operation, either cone-headed measuring probes or alligator measuring clips can be used. special sensors are available on request.

features :

• six to eight additional measuring channels for the materialfox data logger (depending on the material being tested)
• expansion module connects to the universal bus of the materialfox
• requires no additional power supply
• dimensions : 55 x 90 x 25 mm (h x w x d)
• weight : approx. 55g

We supply hygrofox of superior quality to various industries. The hygrofox which we offer is much more versatile, comfortable and flexible. Besides, the hygrofox provided by us is perfect for room climate analysis in apartments, offices and storage rooms, nurseries, museums and many more places. This hygrofox is a multifunctional combination of our thermofox universal and our hygro-thermo-sensor. features :

• can be operated with or without pcstores 4000 readings (2000 for humidity and temperature each, with an option of up to 64000 readings), sufficient for several years depending upon the measuring rhythm
• the oldest readings are overwritten when the memory of the data logger is full (ring memory)
• measuring and storing rhythm (1 second to 24 hours) freely adjustable via our flexible softfox software
• automatic min/max monitoring for gapless registration of extreme humidity / temperature fluctuations
• humidity sensor can be separated via cable
• two further external temperature sensors can be connected (measuring range: -30oc to 120oc, available up to a length of 15m, differential measurement possible)
• crystal oscillator controlled real-time clock and real-time calendar integrated
• power supply via two standard aaa batteries
• batteries can be replaced at any time
• lifetime of the batteries up to 2 years (see configuration)
• measuring data preserved via eeprom memory even without batteries
• resolution of the temperature sensors : 0.1 oc
• resolution of the humidity sensor : 0.3 %rh
• measuring accuracy of the temperature sensors : < 1 oc
• measuring accuracy of the humidity sensor : < 4 %rh (at 30 %rh to 80%rh and 25 oc)
• response time t90 : < 3 minutes
• data logger dimensions : 15 x 6 x 2 cm (h x w x d), 150g including batteries

We are offering pressure transmitter.P8700 oem pressure transmitters with compact design are used for various applications in aviation industry, pharmceuticals, refrigeration and hvac controls, process control, motor fuel control, water pressure monitoring and high end industrial machinery.

We are offering material moisture gigamodule. the material moisture gigamodule offered by us is one of the most modern extension systems for the analysis of material, building and wood moisture. The material moisture gigamodule offered by us is manufactured by the most reputed company. The material moisture gigamodule can be availed from us at pocket friendly price in the market. about material moisture gigamodule :

• extension module for the fully automatic measuring of up to 8 x material moistures of different objects thanks to an enormously large measuring range from under 10kohm to over 100gohm i.e. Wood moisture from under 6 %wg to over 90 %wg!
• this universal sensor (extension module) for our flexible data loggers (e.g. Thermofox universal, and materialfox) was developed especially for the analysis of the material moisture of different materials (e.g. Lumber, screed, concrete, mortar, parquet and many more).
• the system has eight sensor inputs thus enabling the simultaneous analysis of up to eight different materials. Thanks to its extraordinarily large measuring range it can measure on the one hand very dry materials (e.g. Wood below 6%wg i.e. Electrical material resistance > 100 gohm), but on the other hand also very moist materials (e.g. Wood over 90%wg i.e. Electrical material resistance < 10 kohm) quickly and reliably.
• this permits the easy execution of even very comprehensive and randomly located long-term recordings of material samples in buildings, halls, in the laboratory or at other locations.
• the field of application for the material moisture gigamodule spans from the certified expert for construction engineering over material/wood processing companies to scientific institutes, research and testing institutes, universities and many more .
• besides the supplied tables that give you information about numerous construction materials, the material moisture gigamodule provides several operation modes implemented in the system.
• these help you to determine directly the moisture content in percent by weight (%wg) of e.g. Spruce or pine wood.
• additionally the system can determine the electrical resistance of the measuring sample which permits even more fundamental analyses e.g. Material moisture calibration in the scientific area.
• if the extension module is connected e.g. To our data logger thermofox universal there is also the possibility to register the object temperature at two places parallel to the material moisture.
• the temperature monitoring here is effected either via temperature sensors with cable (cable length up to 15m, at request even longer) or also via our flexible wireless temperature sensors.
• the power supply of the extension module uses six standard mignon aa batteries that supply the system with up to 2 years of energy, depending on the set analysis rhythm.
• if required, the batteries can be replaced at any time so that each planned measuring task can start without delay.
• the programming of the material moisture gigamodule and the used data logger (logger type depending on application) as well as the data evaluation is done via the universal software softfox under microsoft windows 98, nt, me, 2000, xp, vista or 7. Newer operating systems are naturally also supported. After the corresponding data logger is connected to the computer via a pc interface cable, the system can be read out or configured immediately.
• the software offers numerous general functions like for example dynamic project management, graphic data analysis, guide lines, pc controlled measurement series, calculation of dew point, statistical curve analysis, export function, auto backup, flexible zoom and many more.
• besides that the material moisture gigamodule as well as the used data logger system itself can be configured arbitrarily.
• functions like setting the analysis interval, min./max. Monitoring for extreme value recording without interruption for even slow measuring rhythms, configuration of the real time clock, precise battery test, digital serial number and many more are available here.
• besides this the measuring system can also be connected via the "universal alarm" to one of our alarm systems.
• this enables e.g. The sending of a sms message ("sms alarm system") in case of exceeding accurately defined material moisture.
• on the other hand an acoustic alarm in case of under-run or over-run of a defined threshold is also possible. In this case the system is connected to our "acoustic alarm" devices.

features :

• up to 8 x pairs of electrodes (accessories) can be connected directly via bnc plugs
• very large measuring range for e.g. Wood moisture from below 6%wg to over 90%wg
• very large measuring range for resistance from below 10 kohm to over 100 gohm
• resolution of the measuring system : 0.1 [%wg - mode] respectively 0.1 [10*log(r) - mode]
• independent analysis interval of the system can be set arbitrarily via the software (accessories)
• different analysis modes can be configured directly: e.g. Resistance, spruce or pine wood
• detailed analysis tables for many building materials accompany the system
• system status and battery status can be seen at any time via the "system status led"
• material analysis can also be started asynchronously via an external trigger button
• can be used with different data loggers from our company (e.g. Thermofox universal)
• additional sensors can be connected to the data logger in use (e.g. 2 x object temperature).
• extension of the measuring system with a flexible alarm function using our "universal alarm"
• different ways of alerting e.g. "sms alarm system", "acoustic alarm", etc
• min./max. Monitoring for extreme value recording without interruption for up to 3 x sensors
• real time clock with quartz accuracy integrated in the material moisture gigamodule
• readings are saved in the data memory of the connected data logger (accessories)
• collected readings remain in memory of the data logger even without batteries
• power supply via six common mignon aa batteries
• battery lifespan up to 2 years (depending on configuration). Batteries can be replaced easily
• dimensions of the material moisture gigamodule : 180 x 140 x 40 mm (hxwxd)

depending on the memory equipment of the data logger used (e.g. Thermofox universal), the active sensors as well as the selected measuring rhythm, the maximum measuring time can be calculated. Here some examples for different memory capacities and measuring rhythms :

The room temperature monitor supplied by us offers fully automatic monitoring and recording of relative humidity and air temperature. The data logger in the room temperature monitor can easily be fastened with a special removable glue strip at the desired place. If someone moves the data logger the built-in security sensor will register this event. The measured data, recorded over several weeks and months in the room temperature monitor can be read out, evaluated and archived with the optional softfox software or the mini-printer. about room temperature monitor :

• it allows the user to create a detailed room climate analysis for the recorded period of time.
• if readings show a humidity of over 60 %rh for a longer period of time, this is the critical condition for mold fungus development.
• depending on the memory equipment of the system, the active sensors as well as the selected measuring rhythm, the maximum measuring time can be calculated.

features :

• long-term recording / monitoring of room climate (relative humidity and air temperature)
• built-in security sensor registers every manipulation attempt of the data logger system
• automatic min/max monitoring for gapless registration of humidity / temperature fluctuations
• storing rhythm (1 second to 24 hours) freely adjustable via flexible softfox software
• stores 4000 readings (2000 for humidity and temperature each, with an option of up to 16000 readings), sufficient for several years depending upon the measuring rhythm
• the oldest readings are overwritten when the memory of the data logger is full (ring memory)
• crystal oscillator controlled real-time clock and real-time calendar integrated
• power supply via two standard aaa batteries
• batteries can be replaced at any time
• lifetime of the batteries up to 2 years (see configuration)
• measuring data preserved via integrated eeprom memory circuit even without batteries
• resolution of the air temperature sensor : 0.1 c
• resolution of the relative humidity sensor : 0.3 %rh
• measuring accuracy of the temperature sensors : < 1 c
• measuring accuracy of the humidity sensor : < 4 %rh
• (at 30 %rh to 80%rh and 25 c)
• response time t90 : < 3 minutes
• dew point calculation available via softfox software (also for thresholds different to 100 %rh)
• data logger dimensions : 11 x 6 x 2 cm (h x w x d)
• data logger weight : 100g including batteries

depending on the memory equipment of the system, the active sensors as well as the selected measuring rhythm, the maximum measuring time can be calculated. Here some examples :

our company is dealing in supply of thermofox maxi. the thermofox maxi offered by us is one of the most modern miniature data loggers available today. the casing of the thermofox maxi combines an air temperature sensor, a risc microcontroller, a real-time clock and calendar, memory for up to 16, 000 readings (optionally up to 64, 000 readings) and a standard battery. all of this together forms a powerful analysis system called as thermofox maxi. about thermofox maxi :

• the data logger features highly simplified operation, high reliability, intelligent minimum/maximum extreme value recording and optimised battery life (the battery can be replaced at any time).
• programming and analysis of the recorded measurement data is performed with the aid of the universal software - softfox that runs under windows 98, nt, me, 2000, xp and 7. newer microsoft operating systems will also be supported.
• once the thermofox maxi is connected to the computer via an interface cable, the system is immediately available for readouts and configuration
• the software offers many general functions, such as dynamic project management, graphical data analysis, appending of notes, an export function, automatic backup, flexible zooming, and much more. in addition, the data logger can be configured to suit your requirements.
• available functions include setting the measuring rhythm (1 second to 24 hours), configuring the real-time clock, setting the condition for the alarm signal, minimum/maximum monitoring for comprehensive recording of extreme values, battery test, digital serial number, and much more.
• in addition to the measurement data analysis with a pc, the accumulated data can also be printed out on site with the aid of a portable mini-printer.
• it is also possible to connect an alarm system to the data logger. in this way, it is possible to trigger a telephone alarm signal or sms alarm message in the event that an air temperature measurement falls outside a predetermined range.
• an acoustic alarm can also be connected to the data logger. the areas of application for the thermofox maxi range from weather stations, refrigerated warehouses, air-conditioner and heating systems, goods transport, automotive technology to process control, and much more.

features :

• stores 16000 readings (option: 64000), sufficient for several years, depending on rhythm
• measuring and storing rhythm (1 second to 24 hours) freely adjustable via pc software
• automatic min/max monitoring for registration of extreme values without interruption
• crystal oscillator controlled real-time clock and real-time calender integrated
• alarm output for sms alarm system, acoustic alarm system, telephone alarm system etc.
• when the memory is full, the oldest readings are first overwritten (ring buffer principle)
• mini-printer can be connected for mobile data printout
• measuring data preserved via eeprom memory even without a battery
• resolution of the air temperature sensor : 0.1 oc
• measuring range of the air temperature sensor : -10 oc to +50 c, tolerance: < +/- 1 oc
• calibration certificate available upon request
• power supply : 3v lithium battery. can be replaced at any time. battery life span up to 2 years
• data logger dimensions : 57 x 35 x 18 mm (h x w x d), 25g including battery

With hygrofox mini users are provided with one of the state-of-the-art data logger systems. This hygrofox mini combines an air temperature sensor, humidity sensor, risc microcontroller, memory for up to 64, 000 readings and a real-time clock into a powerful analysis system. The fully calibrated intelligent cmosens sensor is installed in the hygrofox mini for temperature and humidity reading. The hygrofox mini offered by us is characterized in particular by its optimized long-term stability, high precision, reliability and extremely fast response time of less than 3 seconds. about hygrofox mini :

• there is no need for complex re-calibrations since the sensor can simply be replaced directly on site if required.
• the integrated lithium battery supplies the system with power for up to two years and can be replaced at any time.
• the data logger is programmed and evaluated with the universal softfox software under microsoft windows 98, nt, me, 2000, xp or vista. Once hygrofox mini has been connected to a computer via a pc interface cable, the system can be read out or configured immediately.
• the software offers numerous general functions, such as dynamic project management, graphic data analysis, pc-controlled series of measurement, dew-point calculation, export function, auto backup, flexible zoom and many more.
• in addition, you can program the data logger any way you desire. For this purpose, functions such as setting the measurement rhythm (1 second up to 24 hours), delay of the measurement start, alarm condition for sms alarm or telephone alarm, min./max. Monitoring for extreme value recording without interruption, even for large measurement intervals, calibration of the real-time clock, battery test, digital serial number and many more, are available.
• beside the analysis with a pc, the collected data can also be printed directly on site via a portable mini printer.
• in addition, it is possible to connect an alarm system to the data logger.
• this way, it is possible, for example, to carry out telephonic alarms in the case of falling below or exceeding defined air temperature and/or humidity values.
• it is also possible to connect an acoustic alarm system.
• the areas of application for hygrofox mini are almost unlimited and range from weather stations and refrigerated warehouses, air conditioning and heating, transportation and storage of goods, automotive technology, building monitoring to process control, etc.

features :

• stores 16000 readings (option: 64000), sufficient for several years, depending on the interval
• measuring and storing rhythm (1 second to 24 hours) freely adjustable via pc software
• delayed measurement start (date and time) can be programmed
• when the memory is full, the oldest readings are first overwritten (ring buffer principle)
• dew-point calculation is possible via pc software (also for a threshold not equal to 100 %rh)
• automatic min/max monitoring for registration of extreme climatic values without interruption
• alarm output for sms alarm system, acoustic alarm system, telephone alarm system etc.
• crystal oscillator controlled real-time clock and real-time calendar integrated
• power supply : 3v lithium battery. Can be replaced at any time. Battery life span up to 2 years
• measuring data preserved via eeprom memory even without batteries
• measuring range of the air temperature sensor : - 20 oc to 70 oc
• measuring range of the humidity sensor : 0 %rh to 100 %rh (dew free)
• measuring accuracy of the air temperature sensor : < 0.4 oc at 20 oc
• measuring accuracy of the humidity sensor : < 3.0 %rh between 20 %rh and 80 %rh
• optional : climate sensor with a measuring accuracy of < 1.8 %rh and < 0.3 oc
• resolution of both climate sensors : 0.1 c / 0.1 %rh
• repeatability of both climate sensors : 0.1 c / 0.1 %rh
• long term stability of the air temperature sensor : < 0.04 oc per year
• long term stability of the humidity sensor : < 0.5 %rh per year
• calibration certificate available upon request
• data logger dimensions : 57 x 35 x 18 mm (h x w x d), 25g including battery

Our company supplies electricity data logger of optimum quality. The electricity data logger is used for monitoring of current and voltage signals. The voltfox maxi electricity data logger combines a high-resolution 12-bit a/d converter, a 2000hz hi-speed min/max detection module, an alarm output, memory for up to 64, 000 readings, a real-time clock and a risc microcontroller into an incredibly powerful data logger system. about electricity data logger :

• in its compact housing, the voltfox maxi combines a high-resolution 12-bit a/d converter, a 2000hz hi-speed min/max detection module, an alarm output, memory for up to 64, 000 readings, a real-time clock and a risc microcontroller into an incredibly powerful data logger system.
• the system is designed to measure between 0-2v and can be flexibly expanded to measure between 0-5v, 0-10v, 0-24v or 0-20ma with the aid of the optionally available measuring range adapters.
• the a/d converter that is used is impressive thanks to its high 12-bit resolution and high measuring accuracy.
• the integrated lithium battery supplies the system with energy for up to two years and can be replaced by the user at any time.
• after the quick and uncomplicated configuration of the system, the data logger either starts the measuring task programmed on the pc fully automatically or the system runs endlessly in the so-called ring buffer mode.
• the current and voltage readings are continuously saved by the data logger in a freely configurable recording rhythm.
• thanks to the integrated 2000hz hi-speed min/max detection module, it is possible to detect even short-term fluctuations in measurements precisely and reliably.
• to this end, the signal that is to be analyzed is scanned up to 2000 times per second and the min/max values are additionally stored in the memory for each recording interval.
• the data logger is programmed and evaluated with the universal softfox software under microsoft windows 98, nt, me, 2000, xp, vista or 7.
• once the voltfox maxi has been connected to a computer via a pc interface cable, the system can be read out or configured immediately.
• the software offers numerous general functions, such as dynamic project management, graphic data analysis, pc-controlled series of measurement, formula-based measuring value conversion, statistic curve analysis, export function, auto backup, flexible zoom and many more.
• the data logger can moreover be configured as required. For this purpose, there are functions available such as the programming of the recording rhythm (1 second to 24 hours), freely programmable and fully automated start/stop mode or endless ring buffer mode, alarm condition for sms alarm system, acoustic alarm or telephone alarm, 2000hz hi-speed min/max monitoring, configuration of real-time clock, digital serial number and so much more.

features :

• stores 16000 readings (option: 64000), sufficient for several years, depending on the interval
• measuring and storing rhythm (1 second to 24 hours) freely adjustable via softfox software
• freely programmable fully automatic start-stop mode or endless ring buffer mode
• standard measuring range : 0 - 2v dc / (including integrated reverse polarity protection)
• measuring range adapters for 0 - 5v, 0 - 10v, 0 - 24v and 0 - 20ma available as option
• resolution of the a/d converter: 12 bit, i.e. 0.5 mv (500uv) at 0 - 2 v dc
• measuring tolerance : < 0.2 % (independent of the measuring range)
• hi-speed min/max detection with up to 2000hz available for every measuring interval
• flexible alarm output (even for the min/max readings) for e.g. Sms alarm system, acoustic alarm, telephone alarm etc.
• formula-based conversion of measuring values using the optional softfox software
• many other external sensors can be connected to the data logger
• crystal oscillator controlled real-time clock and real-time calendar integrated
• measuring data preserved via eeprom memory even without batteries
• power supply: 3v lithium battery. Can be replaced at any time. Battery life span up to 2 years
• wall holder available as option
• data logger dimensions : 65 x 35 x 18 mm (h x w x d), 25g including battery

Our company is amidst leading conductivity tester suppliers in india. The conductivity tester is ease of use, and is standard in ec and tds measurement. The graphite conductivity electrode used in the conductivity tester provides greater accuracy because it resists contamination by salt deposits in the sample. Avail the conductivity tester from us at highly affordable rates in the market. conductivity tester features :

• waterproof and it floats!
• high accuracy
• automatic calibration and temperature compensation
• hold function
• beps (battery error prevention system)

about conductivity tester :

• this tester includes features such as : a replaceable graphite electrode, adjustable tds ratio, oc or of measurement, automatic temperature compensation (atc) with adjustable , battery level indicator, stability indicator, automatic shut-off and automatic calibration.
• the graphite conductivity electrode provides greater accuracy because it resists contamination by salt deposits in the sample.
• all of these features are packed in a floating, waterproof casing. This 3-in-1 tester is unmatched in ec/tds/ temperature measurements.

order information :hi 98312 (dist 6) is supplied with hi 73311 ec/tds probe, hi 73128 probe removal tool, batteries and instructions. specificationsrangeec0.00 to 20.00 ms/cmtds0.00 to 10.00 ppttemperature0.0 to 60.0oc / 32 to 140.0ofresolutionec0.01 ms/cmtds0.01 ppttemperature0.1oc / 0.1ofaccuracyec2% f.s.tds2% f.s.temperature0.5oc / 1ofother detailscalibrationautomatic, one point at 12.88 ms/cm or 6.44 g/l (ppt)tds conversion factoradjustable from 0.45 to 1.00temperature compensationautomatic, with adjustable from 0.0 to 2.4% / ocenvironment0 to 50oc (32 to 122of); rh max 100%battery type / life4 x 1.5v with beps / approx. 100 hours of continuous use, auto-off after 8 minutes of non-usedimensions163 x 40 x 26 mm (6.4 x 1.6 x 1.0")weight100 g (3.5 oz.)probehi 73311 replaceable ec/tds graphite electrode (included) accessoriessolutionshi 70030p12880 s/cm ec solution (25) 20 ml sachetshi 70031p1413 s/cm ec solution, (25) 20 ml sachetshi 70032p1382 mg/l (ppm) tds solution, (25) 20 ml sachetshi 70038p6.44 g/l (ppt) tds solution, (25) 20 ml sachetshi 70442p1500 mg/l (ppm) tds solution, (25) 20 ml sachetsaccessorieshi 73128tool for replacing probeprobeshi 73311spare conductivity and tds probe for hi 98311

we are offering thermofox universal. wherever one needs to display, monitor or record temperatures, thermofox universal is the right data logger system. the thermofox universal which we offer provides an excellent solution for the temperature monitoring of cold storage houses, when transporting and storing goods, in air conditioning and heating system construction, in refrigeration engineering or for observing the weather. wherever it is important to record temperatures without interruption for a long period, thermofox universal provides a powerful and inexpensive solution. features :

• temperature monitoring and recording in cold storage houses, when transporting and storing goods, in air conditioning and heating system construction, in refrigeration engineering, for observing the weather, and much more .
• flexible alarm output for sms alarm system, acoustic alarm system, telephone alarm system, etc.
• stores 4000 readings (optional: up to 64000 readings), sufficient for several years, depending on the measuring rhythm
• when the memory is full, the oldest readings are first overwritten (ring buffer principle)
• measuring and storing rhythm (1 second to 24 hours) freely adjustable via pc analysis software softfox
• automatic min/max monitoring for the registration of extreme temperature values without interruption
• flexible sensor equipment: one internal sensor (-10 to +50oc), two optional external sensors (-30 to +120oc) can be connected (please also see our fire adapter)
• differential temperature measurement possible
• crystal oscillator controlled real-time clock and real-time calendar integrated
• measuring data preserved via eeprom memory even without batteries
• power supply via two standard aaa micro batteries
• battery lifetime up to two years (see configuration). batteries can be replaced at any time
• measuring resolution of the temperature sensors : 0.1oc
• measuring accuracy of the temperature sensors : < 1.0oc
• dimensions : 100 x 60 x 20 mm (h x w x d), 100g including batteries

Used in Pharmaceuticals, Food & Beverages, Wineries & Breweries, Dam, Water Treatment Plants Etc.

applications: in cold storage, transportation and storage of food, in air conditioning and heating, refrigeration or in weather monitoring

we supply best quality gaugergsm to the clients. The gaugergsm which we offer is a novel ultrasonic level sensor integrated with gsm cellular modem. The gaugergsm provides unified and cost-effective solution for remote level monitoring applications. Avail the gaugergsm from us at highly affordable rates from our company. rich featured ultrasonic level sensor :

• measurement range up to 8m (26') and short dead zone of 15cm (6")
• sensor coated pvdf, withstanding chemically aggressive targets
• supporting two temperature sensors for increased accuracy
• non contact measurement / no moving parts / rated ip68
• may be operated by an external battery pack
• optional ex-rated model (intrinsically safe)
• one size fits all / one inventory part
• periodic reports and immediate message alerts

applications :

• sewer level monitoring
• autonomous. No data / communication cables. No road digging.
• no need for a special rf communication infrastructure in urban areas
• identification of overflow / blockage prior to environmental hazard
• remote level monitoring of water reservoirs & rivers
• periodic reports / flood alerts / low-level alerts
• fit for harsh weather conditions including rain and direct sun
• user-friendly sms reports to assigned personal
• remote monitoring of diesel tanks
• inventory management at multiple sites - just-in-time refueling
• level, temperature and volume (liters/gallons) reports
• detects diesel theft and inaccurate refueling reports