With the assistance of our dedicated and expert pool of professionals, we manufacture, export and supply a wide array of Pump Panels. Offered range is made using quality material which is directly sourced from the reliable vendors thus ensures optimum performance. Offered range is demanded by the clients for its sturdiness and high strength.

Water pressure is one of the major problems in domestic, agriculture and industrial sector. For boosting pressure in houses, high-rise buildings and all other purposes, hydropneumatic pumps are used. Maintaining a set pressure level, these pumps are highly energy efficient.
In simple words, the main function of the hydropneumatic pump is to manage or boost inadequate supply pressure to a higher consistent value so that a nonstop water supply is made available. The Hydropneumatic pumps are designed with single or multiple pumps to provide constant water pressure and it consists of a pressure pump and a pressure vessel manufactured using most up-to-date technology. The hydro-pneumatic booster pumps have an easy operation and they produce a flow rate of up to 500 bar.
Applications of Hydropneumatic pumps
These pumps have a diverse range of application and are used to boost pressure in many sectors like the building and construction sector, irrigation sector, automobile sector, industrial sector, textile sector, water treatment sector, food and beverage sector and also in distilleries and a lot many others.

A float level switch is a device used to detect the level of liquid within a tank. Simple construction, reliable performance. The product can output stable and reliable switch control signal of "making", "breaking without any fault action, so its reliability is very high and anti-interference is strong.The product can be used for a longtime after it being installed. Almost no maintenance and repairing problem would occur during its operation period. Easy installation method, convenient adjustment method. The liquid level control scope can be adjusted at will with the locating piece moving up and down. Only one screw is needed to secure the signal cable to finish installation.

1 Meter, 2 Meter, 3 Meter, 5 Meter, 10 Meter, 15 Meter, 20 Meter, 50 Meter.

A pressure tank is required in a farm water system to maintain pressure in the system when the pump is not in operation. The amount of water that can be taken from the system between pump cycles is called the "draw off." Pressure tanks should be sized so that the pump will not cycle more than 25 times per hour. This set-up allows approximately 1 gallon of draw off for every 100 gal/hr pump capacity. For example, if a pump produces 600 gal/hr (10 gal/min), then the pressure tank should have a draw off of at least 6 gallons. The specification charts provided with the pressure tank will give the draw-off capacities at different pressures.

When you open a spigot in your home, you expect water to flow at a certain speed. Water pressure in the line causes that water to flow. If your home is on city utilities, water pressure is controlled (for the most part) by the city. If your home is on a well, you need something to build that pressure and this is the purpose of the pressure tank.
In a nutshell: The pressure tank in a water well system creates water pressure by using compressed air to bear down on the water. Because of this pressure, when a valve is opened water is pushed out of the tank through the pipes in your home. When the water in the pressures tank drops below the required amount, a pressure switch is activated turning on the pump. The pump then refills the pressure tank. The combination of the pressure tank, pressure switch and the pump is what allows water to flow through your home.

Switches ON the pump when the water in the overhead tank goes below the pre-decided minimum level. Switches OFF the pump when the water level in the overhead tank reaches the maximum level therefore prevents overflow. Switches OFF the pump when the water level reaches the minimum level in the under ground tank therefore prevents dry running. Shall again switch ON the pump when there is sufficient water in the underground tank. Therefor no need to switch ON or switch OFF the pump. No more Overflow or Dry run thus saving water electricity & manpower.

The product can substitute the parts in automatic water pump with complex structure controlled by traditional machinery switch (Such as pressure gauge, pressure switch, T - valve, check valve and pressure tank). It is featured with steady performance, low maintenance cost, long service life and convenient installation. When the green Power on power supply indicator light flashes, it means the power supply is connected. When the yellow Pump on light flashes, it means the water pump has been started. When the water pump continuously runs, the pressure in pipeline system will rise and when the required pressure of the equipment is reached for several seconds, the water pump stops working. In case this process can not make the pressure in pipeline reach the required pressure of the equipment, the red light Failure will flash. Under this situation, press Restart button and keep it, and wait for the pressure in pipeline reaching the required pressure of the equipment, then the red light will be off. Release the button and close the water tap. The product stays in normal standby state and keeps the pipeline system in water supply state with a constant pressure.

Operating Function Industrial Pressure Switch (IPS) is an electromechanical device that senses changes in pressure and provides electrical contact closures at predetermined pressure values. IPS Pressure Switch may be used to energize an alarm or may directly control the process by cycling pumps, shifting valves etc. In an alarm application, the switch protects valuable equipment by signaling an alarm. In direct control application, the switch can be linked electrically to other equipment.
Applications IPS Pressure Switches are meant for use with oil, water, air, steam and other non corrosive pressure mediums. They are not designed for use with any refrigerant gases. IPS Pressure Switches are used on a wide variety of applications which include pumps, compressors, turbines, lubrication systems & condensers to name a few.

Applications
For gaseous and liquid media that are not highly viscous
or crystallising and will not attack copper alloy parts
Pneumatics
Heating and air-conditioning technology
Medical engineering

Special features
Reliable and cost-effective
Design per EN 837-1
Nominal size 40, 50, 63, 80, 100 and 160
Scale ranges up to 0 . 400 bar

Applications
Hydraulics and pneumatics
Pumps and compressors
Machine building
Building services

Special features
Measuring ranges from 0 6 to 0 600 bar
Non-linearity 0.5 %
Standard industrial signals
Electrical connection: Angular connector form A and C, circular connector M12 x 1, Metri-Pack series 150, cable outlet 2 m unshielded or shielded
Many internationally customary process connections

Water pressure is one of the major problems in domestic, agriculture and industrial sector. For boosting pressure in houses, high-rise buildings and all other purposes, hydropneumatic pumps are used. Maintaining a set pressure level, these pumps are highly energy efficient.
In simple words, the main function of the hydropneumatic pump is to manage or boost inadequate supply pressure to a higher consistent value so that a nonstop water supply is made available. The Hydropneumatic pumps are designed with single or multiple pumps to provide constant water pressure and it consists of a pressure pump and a pressure vessel manufactured using most up-to-date technology. The hydro-pneumatic booster pumps have an easy operation and they produce a flow rate of up to 500 bar.
Applications of Hydropneumatic pumps
These pumps have a diverse range of application and are used to boost pressure in many sectors like the building and construction sector, irrigation sector, automobile sector, industrial sector, textile sector, water treatment sector, food and beverage sector and also in distilleries and a lot many others.

GWS' wide product range offers a full-line of pressure vessels for different applications. Pressure vessels in sizes from 0.16 - 10, 000 liters and in 10, 16 & 25 bar pressure ratings are available to accommodate all your requirements . Additionally, GWS offers both steel tanks and the composite line C2-Lite, enabling maximum flexibility. FlowThru tanks are also available in steel and composite. GWS now also offers the SpringTech series, a range of exclusive quality composite vessels for water treatment systems featuring the revolutionary Vortech bottom distribution technology. FEATURES : Energy Saving Solutions Substantially reduce electric power consumption by reducing small draw off pump starts, i.e., evaporative coolers, toilet flushes, leaks, drip irrigation, etc. Extend pump life by dramatically reducing wear on moving parts. Protect against heat expansion damage to pump bodies. Reduce noise from unnecessary pump starts. Eliminate motor burn outs & low flow cycling. Eliminate pump body failures due to water hammer.

We offered an excellent range of Fire Fighting Pumps to the esteemed clients, as per their specific requirements. Fire Fighting Pumps have horizontal back pull out design, which ensures their easy inspection & maintenance. Moreover, their engineered enclosed impellers ensure smooth and efficient operations of these pumps. TECHNICAL FEATURES Capacity Up to 350 m /hr Head Up to 88 meters Temperature - Up to 70 C Capacity Up to 350 m /hr Head Up to 88 meters Temperature - Up to 70 C Delivery sizes 32 to 150 mm Casing Pressure Up to 16 Kg/cm SPECIFICATIONS Flanges in accordance with DIN2533 PN16 Horizontal Back Pull Out Design for easy inspection and maintenance Engineered Enclosed Impellers for smooth and efficient operation Robust Bearing housing Deep groove ball bearing for longer operating hours & bearing life

Danfoss KP pressure switches are used for regulating, monitoring and alarm systems in industrial applications.The KP series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase ac motors of up to 2 kW directly. Pressure ranges: -0.2 to21 bar High contact load - Ultra short bounce-time Also available with gold plated contact systems Media: Gaseous media and air Enclosure IP44 when mounted with top cover and back plate Also available with enclosure IP55 for OEM customers Small dimensions - space saving - easy to install Shock and impact resistant. SPECIFICATION Rated Voltage / Frequency: 240v / 50HZ to 120v / 60Hz Range: 2-14bar Rated Current / Power: 17A / 3HP or 20A / 1.5HP

We are providing to our valued customers a fine range of Skids & Headers. These are manufactured by high quality raw material & available in different sizes and shapes.

We are amidst the accredited traders and suppliers of a premium range of Wilo Water Pumps. These products are procured from our trusted and certified vendors of the market. Our vendors are facilitated with state-ofthe- art technical facilities and use high-grade quality raw material to process these products. APPLICATION : Raw water intake Desalination Professional irrigation / agriculture Rainwater utilisation Water supply & pressure boosting Fire fighting Water purification

Dewatering Submersible & Sewage Pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts. Features: Corrosion / Abrasion Resistant impeller, Heavy Duty Castings last long, Long life seals, Wear resistant steel oil Chamber. FEATURES High quality Long functionality High performance

We are manufacturer of AC & DC Solar Pump Controller. These pump controllers are manufactured using finest quality components as per the industry set parameters. SILENT FEATURES Due to Designed for power existing AC pumps, Service is easy and available anywhere Can be designed for Pumps from 1 HP to 200 HP As per IEC/BIS standard (Applied for approval) Protection functions: Dry running, Tank Over flow, over/low input voltage, over current and over load protection, Reverse Polarity etc High quality, low cost, compact design and high reliability High Efficiency: 96%-98% Very Low Harmonic Content Dual mode operation: Can be operating on electric power at night and solar power at day time Inverse exponential speed variation at the time of lack of solar radiation Can be integrated with existing system Possibilities for monitoring from remote Area Can be monitored large number of solar water pumping systems centrally The pump works automatically as the sun rises and falls

The paddle type SPDT WFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction are required used in liquid flow lines carrying water or any fluid neither harmful to brass and phosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate. The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0 C degree.
These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres. They may be also used outdoors but must be protected from weather or splashing water. All series WFS flow switches are designed for use only as operating controls.Where an operating control failure would result in personal injury andor loss of property, it is the responsibility of user to add safety devices that protect against, or supervisory systems that warn of control failure.

With the assistance of our dedicated and expert pool of professionals, we manufacture, export and supply a wide array of Pump Panels. Offered range is made using quality material which is directly sourced from the reliable vendors thus ensures optimum performance. Offered range is demanded by the clients for its sturdiness and high strength.

Water pressure is one of the major problems in domestic, agriculture and industrial sector. For boosting pressure in houses, high-rise buildings and all other purposes, hydropneumatic pumps are used. Maintaining a set pressure level, these pumps are highly energy efficient.
In simple words, the main function of the hydropneumatic pump is to manage or boost inadequate supply pressure to a higher consistent value so that a nonstop water supply is made available. The Hydropneumatic pumps are designed with single or multiple pumps to provide constant water pressure and it consists of a pressure pump and a pressure vessel manufactured using most up-to-date technology. The hydro-pneumatic booster pumps have an easy operation and they produce a flow rate of up to 500 bar.
Applications of Hydropneumatic pumps
These pumps have a diverse range of application and are used to boost pressure in many sectors like the building and construction sector, irrigation sector, automobile sector, industrial sector, textile sector, water treatment sector, food and beverage sector and also in distilleries and a lot many others.

A float level switch is a device used to detect the level of liquid within a tank. Simple construction, reliable performance. The product can output stable and reliable switch control signal of "making", "breaking without any fault action, so its reliability is very high and anti-interference is strong.The product can be used for a longtime after it being installed. Almost no maintenance and repairing problem would occur during its operation period. Easy installation method, convenient adjustment method. The liquid level control scope can be adjusted at will with the locating piece moving up and down. Only one screw is needed to secure the signal cable to finish installation.

1 Meter, 2 Meter, 3 Meter, 5 Meter, 10 Meter, 15 Meter, 20 Meter, 50 Meter.

A pressure tank is required in a farm water system to maintain pressure in the system when the pump is not in operation. The amount of water that can be taken from the system between pump cycles is called the "draw off." Pressure tanks should be sized so that the pump will not cycle more than 25 times per hour. This set-up allows approximately 1 gallon of draw off for every 100 gal/hr pump capacity. For example, if a pump produces 600 gal/hr (10 gal/min), then the pressure tank should have a draw off of at least 6 gallons. The specification charts provided with the pressure tank will give the draw-off capacities at different pressures.

When you open a spigot in your home, you expect water to flow at a certain speed. Water pressure in the line causes that water to flow. If your home is on city utilities, water pressure is controlled (for the most part) by the city. If your home is on a well, you need something to build that pressure and this is the purpose of the pressure tank.
In a nutshell: The pressure tank in a water well system creates water pressure by using compressed air to bear down on the water. Because of this pressure, when a valve is opened water is pushed out of the tank through the pipes in your home. When the water in the pressures tank drops below the required amount, a pressure switch is activated turning on the pump. The pump then refills the pressure tank. The combination of the pressure tank, pressure switch and the pump is what allows water to flow through your home.

Switches ON the pump when the water in the overhead tank goes below the pre-decided minimum level. Switches OFF the pump when the water level in the overhead tank reaches the maximum level therefore prevents overflow. Switches OFF the pump when the water level reaches the minimum level in the under ground tank therefore prevents dry running. Shall again switch ON the pump when there is sufficient water in the underground tank. Therefor no need to switch ON or switch OFF the pump. No more Overflow or Dry run thus saving water electricity & manpower.

The product can substitute the parts in automatic water pump with complex structure controlled by traditional machinery switch (Such as pressure gauge, pressure switch, T - valve, check valve and pressure tank). It is featured with steady performance, low maintenance cost, long service life and convenient installation. When the green Power on power supply indicator light flashes, it means the power supply is connected. When the yellow Pump on light flashes, it means the water pump has been started. When the water pump continuously runs, the pressure in pipeline system will rise and when the required pressure of the equipment is reached for several seconds, the water pump stops working. In case this process can not make the pressure in pipeline reach the required pressure of the equipment, the red light Failure will flash. Under this situation, press Restart button and keep it, and wait for the pressure in pipeline reaching the required pressure of the equipment, then the red light will be off. Release the button and close the water tap. The product stays in normal standby state and keeps the pipeline system in water supply state with a constant pressure.

Operating Function Industrial Pressure Switch (IPS) is an electromechanical device that senses changes in pressure and provides electrical contact closures at predetermined pressure values. IPS Pressure Switch may be used to energize an alarm or may directly control the process by cycling pumps, shifting valves etc. In an alarm application, the switch protects valuable equipment by signaling an alarm. In direct control application, the switch can be linked electrically to other equipment.
Applications IPS Pressure Switches are meant for use with oil, water, air, steam and other non corrosive pressure mediums. They are not designed for use with any refrigerant gases. IPS Pressure Switches are used on a wide variety of applications which include pumps, compressors, turbines, lubrication systems & condensers to name a few.

Applications
For gaseous and liquid media that are not highly viscous
or crystallising and will not attack copper alloy parts
Pneumatics
Heating and air-conditioning technology
Medical engineering

Special features
Reliable and cost-effective
Design per EN 837-1
Nominal size 40, 50, 63, 80, 100 and 160
Scale ranges up to 0 . 400 bar

Applications
Hydraulics and pneumatics
Pumps and compressors
Machine building
Building services

Special features
Measuring ranges from 0 6 to 0 600 bar
Non-linearity 0.5 %
Standard industrial signals
Electrical connection: Angular connector form A and C, circular connector M12 x 1, Metri-Pack series 150, cable outlet 2 m unshielded or shielded
Many internationally customary process connections

Water pressure is one of the major problems in domestic, agriculture and industrial sector. For boosting pressure in houses, high-rise buildings and all other purposes, hydropneumatic pumps are used. Maintaining a set pressure level, these pumps are highly energy efficient.
In simple words, the main function of the hydropneumatic pump is to manage or boost inadequate supply pressure to a higher consistent value so that a nonstop water supply is made available. The Hydropneumatic pumps are designed with single or multiple pumps to provide constant water pressure and it consists of a pressure pump and a pressure vessel manufactured using most up-to-date technology. The hydro-pneumatic booster pumps have an easy operation and they produce a flow rate of up to 500 bar.
Applications of Hydropneumatic pumps
These pumps have a diverse range of application and are used to boost pressure in many sectors like the building and construction sector, irrigation sector, automobile sector, industrial sector, textile sector, water treatment sector, food and beverage sector and also in distilleries and a lot many others.

GWS' wide product range offers a full-line of pressure vessels for different applications. Pressure vessels in sizes from 0.16 - 10, 000 liters and in 10, 16 & 25 bar pressure ratings are available to accommodate all your requirements . Additionally, GWS offers both steel tanks and the composite line C2-Lite, enabling maximum flexibility. FlowThru tanks are also available in steel and composite. GWS now also offers the SpringTech series, a range of exclusive quality composite vessels for water treatment systems featuring the revolutionary Vortech bottom distribution technology. FEATURES : Energy Saving Solutions Substantially reduce electric power consumption by reducing small draw off pump starts, i.e., evaporative coolers, toilet flushes, leaks, drip irrigation, etc. Extend pump life by dramatically reducing wear on moving parts. Protect against heat expansion damage to pump bodies. Reduce noise from unnecessary pump starts. Eliminate motor burn outs & low flow cycling. Eliminate pump body failures due to water hammer.

We offered an excellent range of Fire Fighting Pumps to the esteemed clients, as per their specific requirements. Fire Fighting Pumps have horizontal back pull out design, which ensures their easy inspection & maintenance. Moreover, their engineered enclosed impellers ensure smooth and efficient operations of these pumps. TECHNICAL FEATURES Capacity Up to 350 m /hr Head Up to 88 meters Temperature - Up to 70 C Capacity Up to 350 m /hr Head Up to 88 meters Temperature - Up to 70 C Delivery sizes 32 to 150 mm Casing Pressure Up to 16 Kg/cm SPECIFICATIONS Flanges in accordance with DIN2533 PN16 Horizontal Back Pull Out Design for easy inspection and maintenance Engineered Enclosed Impellers for smooth and efficient operation Robust Bearing housing Deep groove ball bearing for longer operating hours & bearing life

Danfoss KP pressure switches are used for regulating, monitoring and alarm systems in industrial applications.The KP series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase ac motors of up to 2 kW directly. Pressure ranges: -0.2 to21 bar High contact load - Ultra short bounce-time Also available with gold plated contact systems Media: Gaseous media and air Enclosure IP44 when mounted with top cover and back plate Also available with enclosure IP55 for OEM customers Small dimensions - space saving - easy to install Shock and impact resistant. SPECIFICATION Rated Voltage / Frequency: 240v / 50HZ to 120v / 60Hz Range: 2-14bar Rated Current / Power: 17A / 3HP or 20A / 1.5HP

We are providing to our valued customers a fine range of Skids & Headers. These are manufactured by high quality raw material & available in different sizes and shapes.

We are amidst the accredited traders and suppliers of a premium range of Wilo Water Pumps. These products are procured from our trusted and certified vendors of the market. Our vendors are facilitated with state-ofthe- art technical facilities and use high-grade quality raw material to process these products. APPLICATION : Raw water intake Desalination Professional irrigation / agriculture Rainwater utilisation Water supply & pressure boosting Fire fighting Water purification

Dewatering Submersible & Sewage Pumps, known for job site dependability. Pumps are constructed of strong die cast aluminum and stainless steel body parts. Features: Corrosion / Abrasion Resistant impeller, Heavy Duty Castings last long, Long life seals, Wear resistant steel oil Chamber. FEATURES High quality Long functionality High performance

We are manufacturer of AC & DC Solar Pump Controller. These pump controllers are manufactured using finest quality components as per the industry set parameters. SILENT FEATURES Due to Designed for power existing AC pumps, Service is easy and available anywhere Can be designed for Pumps from 1 HP to 200 HP As per IEC/BIS standard (Applied for approval) Protection functions: Dry running, Tank Over flow, over/low input voltage, over current and over load protection, Reverse Polarity etc High quality, low cost, compact design and high reliability High Efficiency: 96%-98% Very Low Harmonic Content Dual mode operation: Can be operating on electric power at night and solar power at day time Inverse exponential speed variation at the time of lack of solar radiation Can be integrated with existing system Possibilities for monitoring from remote Area Can be monitored large number of solar water pumping systems centrally The pump works automatically as the sun rises and falls

The paddle type SPDT WFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction are required used in liquid flow lines carrying water or any fluid neither harmful to brass and phosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate. The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0 C degree.
These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres. They may be also used outdoors but must be protected from weather or splashing water. All series WFS flow switches are designed for use only as operating controls.Where an operating control failure would result in personal injury andor loss of property, it is the responsibility of user to add safety devices that protect against, or supervisory systems that warn of control failure.