Our Products
Packaging Services
1 Products availableWater Purifier
1 Products availableAutomotive Components
1 Products availableMining Machinery
1 Products availableMachines And Equipments
1 Products availablePlastic Processing Machinery
1 Products availableWe offer a complete product range of Water Demineralisation Plant, Reverse Osmosis Water Treatment Plant, Water Softening Plant, Effluent Sewage Water Treatment Plant and Reverse Osmosis Water Plant
Demineralization is the process to remove mineral salts from water through the ion exchange process. Based on this process, we bring forth the best Water Demineralisation Plants for the clients across the country. Our Water Demineralisation Plant not only demineralises the water but also conserves it and saves cost. Our Water Demineralisation Plant is available in various materials and sizes. The Water Demineralisation Plants come in different types including Manually Operated and Fully Automatic, with maximum flow rate ranging from 1500 to 20000 LHP. Also, the clients can avail Water Demineralisation Plants from us in customized forms, as per their requirements.
Applications :
Operating Principle :A Typical two-bed DM Plant consists of two FRP/MS Rubber lined Pressure vessels connected in series along with its internal fittings. The first unit consists of high capacity strongly acidic cation exchange resin, which converts positive ions of salt and replaces them with hydrogen ions to form respective acids, which are absorbed in next vessel by strongly basic anion exchange resin. The water obtained by this process shows conductivity less than 20 µ S / cm at 25o C and total dissolved solids less than 10 ppm.
Further high purity water can be achieved by Mixed Bed Deionisers, which are designed to produce high purity treated water. They can be used as polishing units after two bed DM Plant to obtain high purity water. Mixed Bed Deionisers are single column units, filled with strongly acidic cation and strongly basic anion exchange resins mixed together.
There are four distinct stages in the operation of Deionisers :
Service :
In the Service cycle the water enters the vessel and passes through the Resin bed of the respective exchanger
Backwashing :
After the resins are exhausted, the bed is backwashed. Backwashing is carried out by a uniform upward flow of water through the resin bed. The backwash step expands the resin bed releasing any entrapped particulate matter & removes the channeling in the resin column if occurred during the service cycle.
Regeneration :
When the ion exchange resins loose all the exchangeable ions, they require regeneration to restore them back to hydrogen or hydroxyl form depending upon whether they are cation or anion resins. To achieve this 4 - 5% concentrated solution of Hydrochloric acid is used for cation resin and a 4% - 5% concentrated solution of caustic soda for anion resin. Sulphuric acid can also be used for Cation Regeneration but the concentration of acid during injection must be kept at minimum, such as to prevent calcium sulphate precipitation on the resin.
Rinse : The final stage of regeneration is to rinse the resins of excess regenerant
Advantages :
The Reverse Osmosis Water Treatment Plant removes around 90 to 98% of total dissolved salts from the water and thus it plays an important role in the field of water purification. The company is an eminent Reverse Osmosis Water Treatment Plant Manufacturer and Supplier in India. The Reverse Osmosis Water Treatment Plant can be availed from us at the market leading prices.
Applications :
Reverse Osmosis :Reverse osmosis is the process of forcing a solvent from a region of high solute concentration through a membrane to a region of low solute concentration by applying a pressure in excess of the osmotic pressure. This is the reverse of the normal osmosis process, which is the natural movement of solvent from an area of low solute concentration, through a membrane, to an area of high solute concentration when no external pressure is applied. The membrane here is semi permeable, meaning it allows the passage of solvent but not of solute.
To illustrate, imagine a semi permeable membrane with fresh water on one side and a concentrated aqueous solution on the other side. If normal osmosis takes place, the fresh water will cross the membrane to dilute the concentrated solution. In reverse osmosis, pressure is exerted on the side with the concentrated solution to force the water molecules across the membrane to the fresh water side.
The membranes used for reverse osmosis have a dense polymer barrier layer in which separation takes place. Since Reverse Osmosis does not occur naturally, it must be created by applying pressure to the high solids water in order to force it through the membrane, with pressures from 8 - 14 bar for fresh and brackish water, and 40 - 70 bar for seawater, which has around 24 bar (350 psi) natural osmotic pressure which must be overcome.
The clients can avail from us the cutting-edge Water Softening Plant in a wide range of flow rates like from 500 to 60000 LPH. We are a well-reckoned Water Softening Plant Manufacturer and Supplier in Tamil Nadu, India. The Water Softening Plant converts the hard water into soft water.
Applications :
We are known as one of the leading Effluent Sewage Water Treatment Plant Manufacturers and Suppliers from Coimbatore (Tamil Nadu, India). The Effluent Sewage Water Treatment Plant is used in diverse industries to treat the polluted sewage water for protecting the environment. Our Effluent Sewage Water Treatment Plant is offered at very competitive prices.
Applications :
Sidhapudur, Coimbatore, Tamil Nadu 