Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

Aqab Engineers

Aqab Engineers
location Sarkhej, Ahmedabad, Gujarat

Verified Write a Review
View Number

Our Products

  1. Industrial Valves 9 Products available
  2. Valves & Valve Fittings 5 Products available
  3. Measurement Gauges & Fittings 4 Products available

  4. Pressure Switches

    1 Products available

  5. Filters

    1 Products available

Industrial Valves

We offer the best product range of Stainless Steel Swing Check Valve, Check Valve, Globe Valves, Butterfly Valves and Gate Valve.

Stainless Steel Swing Check Valve

Stainless Steel Swing Check Valve
  • CAST STEEL STAINLESS STEEL
We offer stainless steel swing check valve. Check valves, or non-return valves, are installed in pipeline systems to allow flow in one direction only. They are operated entirely by reaction to the line fluid and therefore do not require any external actuation. In this text, the expected, or desired direction of flow is termed 'forward flow, flow in the opposite direction is 'reverse flow'. reasons for using check valves, which include:protection of any item of equipment that can beaffected by reverse flow, such as flow meters, strainers and control valves. to check the pressure surges associated withhydraulic forces, for example, water hammer. these hydraulic forces can cause a wave ofpressure to run up and down pipe work until theenergy is dissipated. prevention of flooding. prevention of reverse flow on system shutdown. prevention of flow under gravity. relief of vacuum conditions.
View Complete Details
Ask Latest Price & Details
Check Valve

Check Valve
  • Min. Order (MOQ) 1 Piece(s)
  • SS CS
  • CI Gun Metal
Check valves, or non-return valves, are installed in pipeline systems to allow flow in one direction only. They are operated entirely by reaction to the line fluid and therefore do not require any external actuation. In this text, the expected, or desired direction of flow is termed 'forward flow, flow in the opposite direction is 'reverse flow'. Reasons for using check valves, which include: Protection of any item of equipment that can be affected by reverse flow, such as flow meters, strainers and control valves.To check the pressure surges associated with hydraulic forces, for example, water hammer. These hydraulic forces can cause a wave of pressure to run up and down pipe work until the energy is dissipated.Prevention of flooding.Prevention of reverse flow on system shutdown.Prevention of flow under gravity.Relief of vacuum conditions.

Additional Information:

Payment Terms : L/C, D/A, D/P, T/T, Western Union,

Packaging Details : WOODEN BOX PACKING

Delivery Time : READY STOCK

View Complete Details
Ask Latest Price & Details
Globe Valves

Globe Valves
  • Min. Order (MOQ) 1 Piece(s)
A Globe Valves is a linear motion Valve and are primarily designed to stop, start and regulate flow. The disk of a Globe Valve can be totally removed from the flow path or it can completely close the flow path. The fundamental principle of the Globe Valve operation is the perpendicular motion of the disk away from the seat. This ensures that the ring-shaped space between the disk and seat ring gradually close as the Valve is closed. This property gives a Globe Valve reasonably good throttling capability. Therefore, the Globe Valve can be used for starting and stopping flow and to regulate flow. Advantages of using Globe Valves:Good shutoff capability Reasonably good throttling capability

Additional Information:

Payment Terms : L/C, D/A, D/P, T/T, Western Union,

Packaging Details : wooden box packing

Delivery Time : READY STOCK

View Complete Details
Ask Latest Price & Details
Butterfly Valves

Butterfly Valves
  • Min. Order (MOQ) 1 Piece(s)
  • SS CS
All valves shall meet API-609 MSS-SP-67 ISO 5272 face-to-face dimensions. Valve sizes from 2" to 12" are rated at 200 psig WOG service and valve sizes from 14" to 30" are rated at 150 psig WOG service. All valves are full rated on dead-end service. All bodies shall be ductile iron 65-45-12 and bi-directional tested in both directions and be bubble tight with zero leakage. Lug bodies shall be full lug rated and all bodies shall be suitable for ANSI 125150 lb, JIS, DIN or B.S. Flanges. Secondary seals shall be self-adjusting. All elastomers, all internal bearings shall be non-corrosive and non-metallic. All seats shall be suitable for 250F sustained high temperature and capable of 2000 PPM on chlorinated applications. Advantages of Butterfly Valves:Open and close easily and quickly, effort, fluid resistance issmall, can operate frequently.Simple structure, small size and light weight. It can carry mud, with the least accumulation of fluid in thepipeline opening.Low pressure, it can achieve a good sealing. Good regulating performance. Many different types of valves are used in flow control. They are used for a variety of reasons, such as phase (liquid or gases), pressure, piping restrictions and solids content. Other valves are chosen for their capability to open and close in a quarter turn. Of all the valve types, the butterfly valve is used as a control device for many reasons including some or all of the above. This article explains the workings of a butterfly valve and its operation. The butterfly valve offers many advantages that include quarter-turn, openness for less plugging and good control capabilities. Both manual and control versions are used.

Additional Information:

Payment Terms : L/C, D/A, D/P, T/T, Western Union,

Packaging Details : WOODEN BOX PACKING

Delivery Time : READY STOCK

View Complete Details
Ask Latest Price & Details
Gate Valve

Gate Valve
  • Min. Order (MOQ) 1 Piece(s)
  • Brand Name Zebco
  • Material Cast Steel
  • Finishing Coated
  • Color Silver
  • Condition New
  • Automatic Grade Manual
  • Actuation Type Single Acting
  • Design Standard API 600
  • Application Oil Fitting
  • Packaging Type Wooden Box, Carton
  • Mounting Type Vertical
  • Valve Size 1inch, 1.1/2inch, 2inch, 2'to60'
  • Packaging Size 5 Pieces
  • Specialities Non Breakable, Investment Casting, Heat Resistance, Durable, Casting Approved
  • Type Gate Valves
  • Country of Origin India
  • SS CS
  • CI GunMetal

Gate Valves are primarily designed to start or stop flow, and when a straight line flow of fluid and minimum flow restriction are needed. In service, these Valves generally are either fully open or fully closed. The Gate (also called wedge) of a Gate Valve is completely removed when the Valve is fully open; the wedge is fully drawn up into the Valve Bonnet. This leaves an opening for flow through the Valve at the same inside diameter as the pipe system in which the Valve is installed. A Gate Valve can be used for a wide range of liquids and provides a tight seal when closed. Advantages of using Gate Valves: Good shutoff features Gate Valves are bidirectional and therefore they can be used in two directions Pressure loss through the Valve is minimal

Additional Information:

Payment Terms : L/C, D/A, D/P, T/T, Western Union

Packaging Details : wooden Box Packing

Delivery Time : READY STOCK

View Complete Details
Ask Latest Price & Details
Pneumatic Valves

Pneumatic Valves
  • FRL AIR CYLINDER
  • SOLENOID VALVE PIPES & FITTINGS
We are offering a comprehensive range of pneumatic frl units, appreciated for long lasting and quality attributes. These frl units have semi-auto-drain function and the body is made of die casting aluminum alloy, thus making them sturdy to operate in industrial environments. These frl units are used in various industries such as food processing, paper and packaging, pharmaceutical and textile. Offered at economical prices, our frl units are robust in design, construction and are ideal to be used in tough working conditions. specifications: medium: compressed air mounting position: vertical 5 pressure range max.: 10 bar temperature nominal: -10 to 60 applications : textile industry pharmaceutical industry auto industry assembly automation instrumentation foundry medical equipment paper and packaging industry industrial machinery food processing industry.
View Complete Details
Ask Latest Price & Details
Stainless Steel Globe Valve

Stainless Steel Globe Valve
  • CAST STEEL STAINLESS STEEL
A globe valves is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk of a globe valve can be totally removed from the flow path or it can completely close the flow path. the fundamental principle of the globe valve operation is the perpendicular motion of the disk away from the seat. This ensures that the ring-shaped space between the disk and seat ring gradually close as the valve is closed. this property gives a globe valve reasonably good throttling capability. Therefore, the globe valve can be used for starting and stopping flow and to regulate flow. advantages of using globe valves:good shutoff capabilityreasonably good throttling capability.
View Complete Details
Ask Latest Price & Details
Stainless Steel Butterfly Valve

Stainless Steel Butterfly Valve
  • Material Stainless Steel
  • Condition New
  • Usage Water Fitting
  • Warranty 1 Year
  • CAST STEEL STAINLESS STEEL
We offer stainless steel butterfly valve. All valves shall meet api-609 mss-sp-67 iso 5272 face-to-face dimensions. Valve sizes from 2" to 12" are rated at 200 psig wog service and valve sizes from 14" to 30" are rated at 150 psig wog service. All valves are full rated on dead-end service. All bodies shall be ductile iron 65-45-12 and bi-directional tested in both directions and be bubble tight with zero leakage. Lug bodies shall be full lug rated and all bodies shall be suitable for ansi 125150 lb, jis, din or b.s. Flanges. Secondary seals shall be self-adjusting. All elastomers, all internal bearings shall be non-corrosive and non-metallic. All seats shall be suitable for 250f sustained high temperature and capable of 2000 ppm on chlorinated applications. advantages of butterfly valves:open and close easily and quickly, effort, fluid resistance issmall, can operate frequently. simple structure, small size and light weight. it can carry mud, with the least accumulation of fluid in thepipeline opening. low pressure, it can achieve a good sealing. good regulating performance. Many different types of valves are used in flow control. They are used for a variety of reasons, such as phase (liquid or gases), pressure, piping restrictions and solids content. Other valves are chosen for their capability to open and close in a quarter turn. Of all the valve types, the butterfly valve is used as a control device for many reasons including some or all of the above. this article explains the workings of a butterfly valve and its operation. The butterfly valve offers many advantages that include quarter-turn, openness for less plugging and good control capabilities. Both manual and control versions are used.
View Complete Details
Ask Latest Price & Details
High Pressure Needle Valve

High Pressure Needle Valve
  • S.S. 202 S.S. 304
We offer high pressure needle valve. Needle valves meter flow on systems with pressures up to 690 bar (10, 000 psi). Featuresforged stainless steel needle valve for 690 bar (10, 000 psi) service pressure-balanced design and non-rising stem of 34" and 1" sizes greatlyreduce torque requirements and increase packing life.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us