Details :

• MADE OUT OF SPECIAL GRADE ABS MATERIAL WITH NOVEL DESIGN.
• 8 POINT TEXTILE SUSPENSION FOR COMFORT WEARING.
• LIGHT WEIGHT YET STRONG TO ENSURE COMFORT DURING EXTENDED WORKING HOURS.
• UNIVERSAL SLOTS ALLOW HEARING, WELDING AND VISOR ACCESSORIES TO BE ATTACHED EASILY.
• AVAILABLE IN VENTED MODEL AND SMART SINGLE PIECE RATCHET DESIGN
• SIZE RANGE BETWEEN 52 CMS - 64 CMS.
• Y STRAPED CHIN STRAP FOR COMFORTABLE FIT
• SKIN FRIENDLY SWEAT PAD, CHIN STRAP AND CUSION PAD FOR EXTENDED WORKING COMFORT.
• CONFORMS TO THE STANDARD :- TYPE I, CLASS C EUROPEAN STD. EN 397 : 2012 + A1 : 2012 LD -30 DEG. C

Details :

• 8 POINT TEXTILE SUSPENSION FOR COMFORT WEARING.
• LIGHT WEIGHT YET STRONG TO ENSURE COMFORT DURING EXTENDED WORKING HOURS.
• UNIVERSAL SLOTS ALLOW HEARING, WELDING AND VISOR ACCESSORIES TO BE ATTACHED EASILY.
• AVAILABLE IN UNVENTED MODEL AND SMART SINGLE PIECE RATCHET DESIGN
• TESTED FOR PROTECTION UPTO 20000 VOLTS
• SKIN FRIENDLY SWEAT PAD, CHIN STRAP AND CUSION PAD FOR EXTENDED WORKING COMFORT.
• CONFORMS TO THE STANDARD :- ANSI / ISEA Z89.1 - 2014 TYPE I CLASS E, G & C. FOR ELECTRICAL INSULATION EUROPEAN STD. EN 397 : 2012 + A1 : 2012 LD -30 DEG. C EN 50365 : 2002 FOR ELECTRICAL INSULATION

Details :

• The risk of head injury at work place is very common and should be taken care of in all circumstances.
• The use of safety helmets or hard hats prevents a worker from impact of a falling orflying object. Even a very small objectfalling froma height can cause a seriousinjury to a worker’s head.
• HEAPROsafety helmets are so designed asto protect and reduce the impact of any penetration or shock of a blow that may occur while in mining, construction, power and fabrication environments. Although safety helmets provide limited safety against hazards at work place however if worn correctly, the right head gear ensuresthat most of the head injuries can be avoided or reduced thus protecting life of a worker.
• Accessories like torch light, ear muffs and welding shields can also be used with manufacturer’s guidelines.

Details :

• Made from special grade high density PE
• Light weight yet strong to ensure extended working hours
• Available in smart vented & unvented designs
• Louvers for cross ventilation in Heapro Ventra series Cushion pad for wearer's comfort
• Available in Pin Lock & Ratchet Design
• Skin Friendly Sweat Pad, Chin Strap & Cushion Pad
• Four point suspension Conforms to IS:2925-1984

Details :

• MADE OUT OF SPECIAL GRADE ABS MATERIAL WITH NOVEL DESIGN.
• 8 POINT TEXTILE SUSPENSION FOR COMFORT WEARING.
• LIGHT WEIGHT YET STRONG TO ENSURE COMFORT DURING EXTENDED WORKING HOURS.
• UNIVERSAL SLOTS ALLOW HEARING, WELDING AND VISOR ACCESSORIES TO BE ATTACHED EASILY.
• AVAILABLE IN VENTED MODEL AND SMART SINGLE PIECE RATCHET DESIGN
• SIZE RANGE BETWEEN 52 CMS - 64 CMS.
• Y STRAPED CHIN STRAP FOR COMFORTABLE FIT
• SKIN FRIENDLY SWEAT PAD, CHIN STRAP AND CUSION PAD FOR EXTENDED WORKING COMFORT.
• CONFORMS TO THE STANDARD :- TYPE I, CLASS C EUROPEAN STD. EN 397 : 2012 + A1 : 2012 LD -30 DEG. C

Details :

• 8 POINT TEXTILE SUSPENSION FOR COMFORT WEARING.
• LIGHT WEIGHT YET STRONG TO ENSURE COMFORT DURING EXTENDED WORKING HOURS.
• UNIVERSAL SLOTS ALLOW HEARING, WELDING AND VISOR ACCESSORIES TO BE ATTACHED EASILY.
• AVAILABLE IN UNVENTED MODEL AND SMART SINGLE PIECE RATCHET DESIGN
• TESTED FOR PROTECTION UPTO 20000 VOLTS
• SKIN FRIENDLY SWEAT PAD, CHIN STRAP AND CUSION PAD FOR EXTENDED WORKING COMFORT.
• CONFORMS TO THE STANDARD :- ANSI / ISEA Z89.1 - 2014 TYPE I CLASS E, G & C. FOR ELECTRICAL INSULATION EUROPEAN STD. EN 397 : 2012 + A1 : 2012 LD -30 DEG. C EN 50365 : 2002 FOR ELECTRICAL INSULATION

Details :

• The risk of head injury at work place is very common and should be taken care of in all circumstances.
• The use of safety helmets or hard hats prevents a worker from impact of a falling orflying object. Even a very small objectfalling froma height can cause a seriousinjury to a worker’s head.
• HEAPROsafety helmets are so designed asto protect and reduce the impact of any penetration or shock of a blow that may occur while in mining, construction, power and fabrication environments. Although safety helmets provide limited safety against hazards at work place however if worn correctly, the right head gear ensuresthat most of the head injuries can be avoided or reduced thus protecting life of a worker.
• Accessories like torch light, ear muffs and welding shields can also be used with manufacturer’s guidelines.

Details :

• Made from special grade high density PE
• Light weight yet strong to ensure extended working hours
• Available in smart vented & unvented designs
• Louvers for cross ventilation in Heapro Ventra series Cushion pad for wearer's comfort
• Available in Pin Lock & Ratchet Design
• Skin Friendly Sweat Pad, Chin Strap & Cushion Pad
• Four point suspension Conforms to IS:2925-1984