Applied Engg. Services

Amingaon, Guwahati, Assam

Our clients tell us we are unique for a variety of important reasons including:

The Universal Hydraulic Tool Box

• All sets include Enerpac pump, hose, cylinder and gauge
• Lock-on or threaded connectors
• Complete maintenance set for almost every maintenance application.

Our clients tell us we are unique for a variety of important reasons including:

• Protect your equipment from dust, water, grease and dirt
• Reduce losses on the jobsite, maintenance area or shop
• Durable steel, painted with rust-resistant primer and finished in durable enamel
• Heavy duty hinges and lifting handles
• Lockable.

Our clients tell us we are unique for a variety of important reasons including:

• Enerpac hydraulic machine lifts are designed for lifting heavy equipment with minimum available access
• Remote hydraulic pump enhances safety
• Low height lifting toe
• Precision guided to reduce friction and isolate cylinder from side-loads
• Two extendable support feet provide extra stability
• Includes RC-Series Cylinder with CR-400 coupler.

Our clients tell us we are unique for a variety of important reasons including:

• Hydraulic vertical lifting wedge has lifting force of 16 tons at 700 bar hydraulic pressure
• Requires very small access gap of only 10 mm
• Each step can spread under full load
• Straight vertical lifting
• Unique interlocking wedge design: no first step bending and risk of slipping out
• Single-acting, spring return cylinder
• Lifting wedge LW-16 includes safety block SB-2
• Includes RC-Series Cylinder with CR-400 coupler.

Our clients tell us we are unique for a variety of important reasons including:

• 12, 7 mm thick capacity through mild steel
• Round, oblong and square punches and dies are available to solve your punching applications
• Long life Enerpac single-acting, spring return design
• Durable steel case keeps tools and dies together and provides for easy carrying and storage
• CR-400 coupler included.

Our clients tell us we are unique for a variety of important reasons including:

• WR-5: For use in very confined work areas
• WR-15: For long stroke spreading applications
• Single-acting, spring return
• A-92: Spreader attachment; threads on RC-Series 10 ton cylinders (except RC- 101).

Our clients tell us we are unique for a variety of important reasons including:

• Single-acting, spring return on all models, except WHR-1250
• Guillotine action for easy operation
• Lifting handles on larger models for easy transport
• Carrying bag included for easy carrying and tool protection
• Ideal for use with most Enerpac pumps featuring 3-way valve or dump valve and 700 bar pressure rating (except WHR-1250, which requires 4-way valve)
• CR-400 coupler and dust cap included on all models.

Our clients tell us we are unique for a variety of important reasons including:

• Rotating heads for operator convenience
• Guillotine action for easy operation
• Carrying bag included for easy carrying and tool protection
• Velcro straps to secure handles on larger models for easy carry
• Spring return for easy operation
• Light weight self-contained tool, can be used anywhere.

Our clients tell us we are unique for a variety of important reasons including:

• Makes smooth, wrinkle-free bends
• Sets include genuine Enerpac cylinder, hose and manual, air or electric pump
• Sets are also available without hydraulics
• Bending shoes and bending frame are lightweight, heat-treated aluminium
• All sets include sturdy steel storage case
• All sets include BZ-12091 angle indicator for accurate bending
• BZ-12377 Shoe Lock Pin included in every set
• Eject-O-Matic benders (STB-202 models) have double-acting cylinder to eject pipe from the bending shoe.

Our clients tell us we are unique for a variety of important reasons including:

• Durable, field-proven designs, with soft-grip ergonomic handles reduce operator fatigue
• Single-acting PTJ models, with spring-seating and optional power-seating are equipped with the new Enerpac RC Post-tensioning cylinders with a 254 mm stroke, ideal for slab-on-grade applications
• Double-acting DA models have an 216 mm stroke and are machined from a steel billet; feature standard powerseating and gun-drilled internal hydraulic passages
• All jacks have a standard 3" nose assembly. Longer nose assemblies are available as accessories for all models
• A full line of grippers is available to tension common strand diameters
• Complete offering of Enerpac parts and soft kits allow quick and easy service.

Our clients tell us we are unique for a variety of important reasons including:

• Available in battery or hydraulic versions and sizes to cut 12, 7 mm or 15, 2 mm strand sizes
• Reversible, hardened blades extend life and provide over 2, 000 cuts
• Shear tendons inside the pocket, providing controlled tendon length without applying heat to the anchorage
• Battery models include two industrial 28 VDC battery packs and fast charger
• Battery models shipped in durable product case for protection and easy transport
• Eliminates the need for Hot Work Permits on the job when cutting tendon tails
• Provides quick and effortless tendon cutting with no risk of abrasive saw kick-back

Our clients tell us we are unique for a variety of important reasons including:

• Optimum match of individual set components
• Pre-selected combinations, ready-for-use
• All sets include:Hydraulic tool, single-actingTwo-speed hand or foot pump, Turbo II air or electric pumpHC-7206 high pressure hydraulic hoseGP-10S pressure gauge with GA-2 gauge adaptor
• STP-set with 35 ton hydraulic punch
• STC-set with hydraulic cutter head
• STB-set with pipe bender

Our clients tell us we are unique for a variety of important reasons including:

Tension Meter TM-5

• Accuracy, 2% of full scale
• Zinc and bronze plated to resist corrosion
• Dual-range readout in kilograms and pounds
• Maximum indicating pointer reading for pre-selected forces or to maintain force readings
• Cushioned metal case provides safe storage and transport.

Load Cells LH-series

• Accuracy of 2% of full scale
• Swivel loading pad reduces eccentric loading for improved accuracy
• Maximum indicating pointer reading pre-selected forces or to maintain maximum force readings
• Dual-range readout in kilograms and pounds

Our clients tell us we are unique for a variety of important reasons including:

All bench and shop presses equipped with long life Golden Ring Design cylinder

XLP-Series hydraulic press

• Multi-functional presses in kit form (50 and 75 ton presses)
• Easy grip forklift access on 50 and 75 ton presses
• Height adjustment of upper or lower bed with winch (50 & 75 ton)
• Width adjustment allows cylinder to move from side-to-side
• Pump options include XA-Series air-operated foot pump pressure gauge integrated in pump for optimal control suitable for delicate pressing jobs from variable oil flow.

VLP-Series hydraulic press

Our clients tell us we are unique for a variety of important reasons including:

• Hydraulic Roll-Frame Press design features a stationary bed with the ability to support heavy loads.
• Quality welded frame for maximum strength and long life
• Frame rolls easily on 4 steel roller bearings
• Exclusive 'Hydra-Lift' bolster for effortless adjustment of the vertical daylight
• Roller head design is standard to allow lateral movement and locking of the cylinder up to 300 mm left or right of centre
• All models in the quick selection chart have been matched to an electric pump, double-acting cylinder, hose and gauge, offering the complete package

Our clients tell us we are unique for a variety of important reasons including:

C-Clamp Press

• 5, 10 and 20 ton capacity
• Operational in all positions.

Arbor Press

• 10 and 30 ton capacity
• Foot mounting holes for horizontal and vertical positioning
• Machined working surfaces for easier fixturing
• Slotted back to simplify loading and unloading of longer parts.

Our clients tell us we are unique for a variety of important reasons including:

• Enerpac ATM-Series tools rectify twists and rotational misalignment quickly, safely, and without the need for an external power source
• Appropriate for use on most ANSI, API, BS and DIN flanges
• No slings, hooks or lifting gear required
• Can be installed and used in any position (horizontally or vertically)
• Portable, light weight design enables easy transport and use, even in remote location

Our clients tell us we are unique for a variety of important reasons including:

• Enerpac cylinder accessories include cylinder mounting attachments to greatly extend the application possibilities .
• Hardened removable saddles: flat, grooved and tilt versions
• Base plates to ensure the cylinder stability for lifting applications
• Mounting blocks
• Base and plunger clevis eyes

For specialty attachments for 5, 10, 15 and 25 ton RC-cylinders see MS-seriesMaintenance Sets

Our clients tell us we are unique for a variety of important reasons including:

• Precise hydraulic control allows fast, efficient and safe pulling
• High quality, forged steel components provide superior reliability and service.

WARNINGDo not exceed 50% of the rated puller capacity when using a double crosshead (2 grip arms) or when using puller legs in combination with bearing puller attachment.

Our clients tell us we are unique for a variety of important reasons including:

Accurate, Efficient Torque Multiplication

When accurate make-up or break-out of stubborn fasteners requires high torque

• High-efficiency planetary gear sets achieve high output torque from low input torque
• Most models operator protected by anti-backlash device
• Multiplier output accuracy 5% of input torque
• Reversible, tighten or loosen bolts
• Reaction bar or reaction plate type
• Angle-of-turn protractor standard on E300 models
• Reaction plate models offer increased versatility with reaction point locations
• E300 and E400 series replaceable shear drives provide overload protection of internal power train (one replacement shear drive is included).

Our clients tell us we are unique for a variety of important reasons including:

• Thermoplastic torque wrench hoses
• Dual hoses, 6 and 12 meters long
• THQ-700-series with spin-on couplers for:700 bar S and W-series torque wrenchestorque wrench pumps with suffix Q
• THC-700-series with lock-ring couplers for:800 bar SQD and HXD-series torque wrenchestorque wrench pumps

Our clients tell us we are unique for a variety of important reasons including:

• Enerpac bolt tensioner and pump accessories include hoses and quick disconnect couplers for tensioning tools and pumps
• 1500 bar maximum operating pressure.

Our clients tell us we are unique for a variety of important reasons including:

• Heavy duty impact sockets for power driven torquing equipment
• Supplied with "Pin and Ring"
• According ISO 2725, ISO 1174, DIN 3129, DIN 3121 or ASME- B107.2/1995

Our clients tell us we are unique for a variety of important reasons including:

• Enerpac hydraulic bolt tensioners have six load cells from M16 to M95 or from " to 3"
• Twin ports for quick connection of multiple tools
• Only one size of bridge per size of load cell
• Detachable and rotational bridge simplifies bolt tensioner positioning
• Full bridge window
• Piston stroke indicator
• Black surface treatment protects against corrosion
• Anti-slip grip for more secure handling
• Universal and multi-use tool.

Our clients tell us we are unique for a variety of important reasons including:

• ZU4T-Classic torque wrench pumps has traditional electro-mechanical components (transformers, relays and switches) in place of LCD with solid-state electronics on the ZU4T premium wrench pumps
• Shut-off timer, turns pump off after 20 seconds, to conserve power and reduce heat
• For use with S and W-series Enerpac torque wrenches and other major brands 700 bar wrenches
• Pump options: heat exchanger, skid bar, roll cage and 4-wrench manifold

Flexibility

• Ultra booster tensioner system works in combination with any hydraulic pump for doubleacting torque wrenches that deliver a continuous oil flow of minimal 2 l/min and a working pressure of 160 bar; ideal to work in combination with the ZE4TW-pump.
• Very flexible solution for all applications that require up to 2000 bar of working pressure

Convenience

• High portability as the PIT-1500 only weighs 10 kg
• Useable with any electric or pneumatic driven pump and convert it into a ultra-high pressure pump

Technology

• Preset 1:13 pressure intensifier ratio
• With a 10-micron filter and visual filter condition indicator
• Standard with an easy-to-read 100 mm diameter pressure gauge with 1% accuracy over full scale

Low Investment

• In situations where both hydraulic torque wrenches and bolt tensioners need to be used, only one pump will be needed instead of two when an ultra booster is used

Our clients tell us we are unique for a variety of important reasons including:

• Performance match tool-pump sets
• Nut Splitter Sets -splits nuts quickly and safely in seconds
• Flange Spreader Sets -separate pipe flanges with ease, enabling efficient maintenance tasks
• Wedge Spreader Set -friction-free, smooth and parallel wedge movement without risk of spreading arm failure
• All sets include 1, 8 m safety hose HC-7206, gauge GP-10S and gauge adapter GA-2

Our clients tell us we are unique for a variety of important reasons including:

• Enerpac industrial mechanical and hydraulic spreaders feature an integrated wedge concept: Friction-free, smooth and parallel wedge movement eliminates flange damage and spreading arm failure
• For maintenance, commissioning, shutdowns, testing and valve change outs
• Unique interlocking wedge design - no first step bending and risk of slipping out of joint
• Requires very small access gap of only 6 mm
• Stepped spreader arm design - each step can spread under full load
• Few moving parts mean durability and low maintenance
• Safety block SB-1 and ratchet spanner SW-22 included with FSM-8 mechanical wedge spreader
• Safety block SB-1 and Enerpac RC-102 single-acting cylinder included with FSH-14 hydraulic wedge spreader.

Our clients tell us we are unique for a variety of important reasons including:

• Enerpac hydraulic flange spreaders are lightweight and have an ergonomic design for ease of use
• Adjustable jaw widths from 70 to 216 mm for a wide range of applications
• Single-acting, spring return RC-Series cylinders for fast and trouble-free operation

Our clients tell us we are unique for a variety of important reasons including:

• Enerpac hydraulic nut splitters are specially designed to suit standard ANSI B16.5 / BS1560 flanges
• Single-acting (spring return) or double-acting cylinder
• Tri-blade technology provides three cutting surfaces on a single blade
• Interchangeable heads provide maximum nut range flexibility
• Preset scale allows controlled blade extension, which avoids damage to bolt threads
• Grip tape and handle included for more secure manoeuvrability
• Nickel-plated cylinder body for excellent corrosion protection and improved durability in harsh environments
• Internal Pressure Relief Valve for overload protection
• CR-400 coupler and dustcap included on all models.

Our clients tell us we are unique for a variety of important reasons including:

GA-Series Gauge Adaptor

For easy mounting of a gauge onto your hydraulic system

GA-918 Swivel Adaptor

Simplifies gauge installation

Provides swivel connection for easy scale reading

V-91 and NV-251 Needle Valves

V-91 Snubber valve: provide positive shut-off

NV-251: 303 Stainless steel stem, 16 threads/inch

Our clients tell us we are unique for a variety of important reasons including:

Thermo-Plastic Safety Hydraulic Hoses (700-Series)

• Enerpac coupler bleed tool eliminates unsafe pressure relieving and bleeding activities such as:using a hammer and punch to unseat check balls, cones & poppetsusing a wrench to loosen a coupler.
• Designed to connect to Enerpac C604, CH604 and CR400 High Flow couplers (male & female halves).
• Coupler Bleed Tool will also work with competitive equivalents.
• Comes in a convenient storage box that keeps the parts together.
• Enerpac engineered safe for use at 10, 000 psi (700 bar).

Our clients tell us we are unique for a variety of important reasons including:

• Enerpac A series hydraulic manifolds are designed for multiple hydraulic line connections at one central location
• Directing hydraulic oil to or from a pressure source

Our clients tell us we are unique for a variety of important reasons including:

The genuine range high pressure fittings

• 700 bar fittings for proper connection of hydraulic components

Our clients tell us we are unique for a variety of important reasons including:

• Premounted split-flow manifolds to control two or four single-acting cylinders or tools simultaneously.

Our clients tell us we are unique for a variety of important reasons including:

Thermo-Plastic Safety Hydraulic Hoses (700-Series)

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 700 bar
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Crimped-on rubber strain relief for improved life and durability on all hydraulic hose models.