Wall Mounted Ethylene Gas Sensor Transmitter Model ATS 109TD with LED disply & with 4-20 mA output.

Specifications :-
1-Range :0-1000 PPM
2-Sensor : Electro Chemicals
3-LED Display
4-Power Supply; 24 V Dc

Specification:

• Minium Resolution: 0.1 or 1 unit of the range
• Indication: Digital Continuous
• Mounting: wall
• Sensor Technology: Appropriate to Application
• Detection Method: Diffusion / Sample Draw Pump
• Accuracy: +/- 2%
• Linearity: +/- 2%
• Relative Humidity: 0-99 % Non-condensing
• Response Time: ( 90% in 10 seconds)
• Singal Output for Recorder: 0- IV, 420 mA (Optional)
• Alarm Setting: High and very High Adjustable over full range
• AlarmCircuits: SPDT 5 AMP 220V Contacts
• Controls: Zero , Span, Alarm settin

Specification:

• Minium Resolution: 0.1 or 1 unit of the range
• Indication: Digital Continuous
• Mounting: wall
• Sensor Technology: Appropriate to Application
• Detection Method: Diffusion / Sample Draw Pump
• Accuracy: +/- 2%
• Linearity: +/- 2%
• Relative Humidity: 0-99 % Non-condensing
• Response Time: ( 90% in 10 seconds)
• Singal Output for Recorder: 0- IV, 420 mA (Optional)
• Alarm Setting: High and very High Adjustable over full range
• AlarmCircuits: SPDT 5 AMP 220V Contacts
• Controls: Zero , Span, Alarm setting

data logger

The ThePortable Carbon Dioxide Purity Analyserhave been design especially for cylindrical and power station to check theCarbon dioxidePurity. The Analyzer is supplied in robust and reliable construction having Li-IONE rechargeable battery with 6 Hour of continuous operation. The integral Pump, Needle valve and Flow meter are used to control the sample through the analyzer during the monitoring of alternator gases. Features Simple Low Cost maintenance Microcontroller based embedded intelligent.

Specification:

• Principle Thermal Conductivity and NDIR (Non dispersive Infrared )
• Range %V/V Resolution 0.1 Unit or 1 Unit (Application based) Sampling Method Auto Suction or Direct Plug In
• Display 128 X 64 Graphics LCD
• Alarm Two Levels Low High Visual and Audible
• Power Source Built in Lithium Rechargeable battery
• Accuracy /2%
• Response Time Data Storage 5000 or 10000
• Computer Interface RS 232, USB, RS485
• Sensor Life 4-5 Years
• Operating Time 6 8 hours
• Environmental Temperature 15 degree Celsius
• Humidity Atmosphere Pressure 86- 106Kpa
• Housing High Impact Plastic
• Dimension in mm 200 (W) X 120 (H) X 185(D)
• Weight 1.5 KG
• Warranty One Year

Application:

• Hydrogen Cooled Alternators Turbine
• Hydrogen Analysis MAP (Food Gas Packaging)
• Gasification Syngas
• Metal Heat Treatment Plant
• Laboratories Institutions Treatment
• Process Chemical Industries
• Petrochemical Pharmaceutical Industries.

have been design especially for cylindrical and power station to check theCarbon dioxidePurity. The Analyzer is supplied in robust and reliable construction having Li-IONE rechargeable battery with 6 Hour of continuous operation. The integral Pump, Needle valve and Flow meter are used to control the sample through the analyzer during the monitoring of alternator gases. Features Simple Low Cost maintenance Microcontroller based embedded intelligent.

Specification:

• Principle Thermal Conductivity and NDIR (Non dispersive Infrared )
• Range %V/V Resolution 0.1 Unit or 1 Unit (Application based) Sampling Method Auto Suction or Direct Plug In
• Display 128 X 64 Graphics LCD
• Alarm Two Levels Low High Visual and Audible
• Power Source Built in Lithium Rechargeable battery
• Accuracy /2%
• Response Time Data Storage 5000 or 10000
• Computer Interface RS 232, USB, RS485
• Sensor Life 4-5 Years
• Operating Time 6 8 hours
• Environmental Temperature 15 degree Celsius
• Humidity Atmosphere Pressure 86- 106Kpa
• Housing High Impact Plastic
• Dimension in mm 200 (W) X 120 (H) X 185(D)
• Weight 1.5 KG
• Warranty One Year

Application:

• Hydrogen Cooled Alternators Turbine
• Hydrogen Analysis MAP (Food Gas Packaging)
• Gasification Syngas
• Metal Heat Treatment Plant
• Laboratories Institutions Treatment
• Process Chemical Industries
• Petrochemical Pharmaceutical Industries.

GAS MONITOR ( MODEL ATS 109TD EXP. PROOF )

FOR HYDROCARBONS/EXPLOSIVE, TOXIC GASES & OXYGEN.

H2, O2, CO, CO2, NO, NO2, SO2, H2S, NH3, CL2, E.O., BR2, F2, HCL, HF, HCN

LPG/CNG, HYDROCARBONS, VOC, ORGANIC SOLVENTS/VAPOURS.

Fast and accurate response.

Flexibility to fit your application needs

··

· Compatible for Marine Applicaions

Integral or Remote mounting Sensor.

Interfaces with Industry Standard Transmitters. ·

·

· Ingress Protection IP-65

Applied Field proven gas Monitor/Transmitters continuously monitors for dangerous

concentrations of gases. The linearize 4-20 mA transmission can interface directly with any

receiving instrument starting from indicators, controllers to large control systems.

Provision for directly connection of buzzer/Hooter for Alarm through Relay.

The standard system consist of a compact electronic module housed in a Weatherproof or

explosion proof Metallic or Polyester box with an application specific sensor. This state

of the art transmitter is carefully designed with and manufactured with Industrial grade

Components for reliability accuracy and long life. It is certified for use in hazardous

areas Class 1, Division 1, Group B, C & D. (IIA, IIB or IIC), IP 65 apart from being

available in weatherproof Enclosure Transmitters are equipped with micro controller and

are heavily featured with self diagnostics, Auto calibration (in case of toxic, Oxygen,

combustible gases only) through embedded Software, can be done at site. RS 232/485 output

with baud rates of 2400 bps is available as an options.

With Display Without Display

CSIR-CIMFR

Approved

DESCRIPTION

SPECIAL FEATURES

Applied Techno Engineers Pvt. Ltd.

An ISO 9001:2015 Company

Process Monitoring Instruments

Gases Oxygen Hydrocarbon, Hydrogen

%

LEL PPM %

Range 0 - 25/30/100 0-100% 0-1000/10000 0-100

D etection Principle Electrochemica l Catalytic Semiconductor Thermal

Combustion Electrochemica l Conductivity

Gases H2S CO So2 NO2 2 Br2, F2 HCL HCN NO NH3 E.O

Range PPM PPM PPM PPM PPM PPM PPM PPM PPM PPM

Max 2000 4000/10% 200 50 2000 200 200 1000 100/500 100

Min 0 0 0 0 0 0 0 0 0 0

De t e c t i o n P r i n c i p l e Application Based Electrochemical , Catalytic, Semiconductor or PID

Gas Monitor, Gas Analyzer, Transmitters, Humidity Moisture Dew Point Analyzer, Dew Point

Transmitters, Sampling Systems & Dust Particulate Monitor

Response Time

< 30 seconds

Zero drift

0.2% FS

Accuracy

+/- 1% FS (For Oxygen 0.5% FS)

Operating Voltage

24 Volt DC or 230VAC

Operating Temperature -20 to +60 Deg. C

Terminations

PCB mounted terminal blocks to accept 1.5mm wires

Display

7 Seg. LED Display

Output

4-20 mA Linear, Relay for diff levels /0 - 1Volts DC (V)/RS232/RS485

2wire (Dry Electrochemical sensor based, Dew point, Humidity, Temp,

Moisture, Vapour Pressure) , 3Wire Combustible, VOC’s, Toxic Gases

Power Consumption

2 wire: 0.5 W max. / 3 wire: 3.6 W max.

Max. Load

600 Ohms

Mounting

Wall mounting, 2" Pipe (U clamps will be provided)

Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria

for every product. Due to applied commitment to research, design and product improvement, specifications are subject to change without notice.

The Minimum & Maximum ranges & the Gases Indicated are Intended as a Guide for full scale detection.

VOC

PPM

100/1000

0

Housing Cast Aluminum Alloy (IP65)

PORTABLE GAS MONITOR/ANALYZER MODEL ATS-101M

model ATS-101M is Portable Single/Dubel Gas Detectors are capable

of detecting Oxygen, Toxic, and Combustible gases making them

ideal for use in various environments. Compact, Light Weight

Intelligent Unit with Application Specific Sensors Sensitive to

PPB / PPM or % levels of Gases & Vapors.

The advanced Micro controller technology employed makes these ALERT METERS highly dependable,

reliable and accurate. The complete automatic operation and calibration feature leaves no

scope for user error.

These Compact, self contained and intrinsically safe designed instrument housed in a weather

proof high impact plastic case are powered with a rechargeable Lithium 3.7V Dc battery.

On switching 'ON', the instrument goes thorough its complete self integrity check, and

displays factory set Warn and Alarm values before indicating ‘Ready’ for monitoring.

While in Operation, the instrument monitors the work place continuously giving the latest

update concentration of designated Gas through diffusion sampling. Suction sampling is

possible with an optional manual or battery operated pump and adaptor. The poison resistant

Pellister or long life, integrally mounted electrochemical Sensors with inbuilt cross

interference filters are gas specific. Optionally the sensors can be mounted on an extension

cable for monitoring inaccessible locations before entry.

The instruments emits an audible beep every 15 secs that provides confidence to the user that

he is well protected. Audio, Visual also Warn and Alarms protect him from hazardous

situations.

The Warn and Alarm Values are factory set. Low Battery Alarm alerts the user to replace or

recharge the Battery. Special features like maximum exposed concentration and TWA readings

can be incorporated

Complete Automatic Operation.

128X64 Graphics Display

Continuous Diffusion / Suction Sampling

Confidence Beep every 15 seconds.

Complete self Integrity check on start

Automatic Calibration.

Display of WARN & ALARM

Low battery Alarm.

FEATURES

Sample Type: Diffussion

(Without auto suction pump)

Sample Type: Auto suction

(with inbuilt auto suction pump)

Applied Techno Engineers Pvt. Ltd.

An ISO 9001:2015 Company

Process Monitoring Instruments

FEATURES

Overall Ranges PPB / PPM / % V/V/% LEL

Sampling Method Diffusion (D) or Suction (S)

Principle Specific to Application (EC, NDIR, Solid State, Catalytic, PID)

Sensor Life 2 - 5 years

Measurement Continuous.

Display 128 X 64 graphics Display (Reading, Alarm Icon & low battery Condition)

Resolution 0.01, 0.1 or 1 PPM, %V/V, % LEL as applicable.

Accuracy +/- 2 % & 0.5% for oxygen.

Repeatability +/- 2 %.

Response Time < 30 seconds at 95 % variation.

Alarms Low & HI Visual and Audible (User Customized))

Humidity 0 - 9 5 % R H

Power Supply 3.7 V DC Long Life Lithium Rechargeable Battery

Battery Life 6-8 hours.

Housing & IP High Impact Plastic. (ABS), Ingress Protection:IP68

Size & Weight 115(H) X180(L) X 60(D); 300 GM.

Temperature Range -30 to 55 Deg. C.

Trace Moisture Analyzer

Model ATS-303D Process Moisture Analyzer Designed to Handle Rigorous Demands of Moisture Measurement in Natural Gas Applications, Provides Fully Automatic Self-Calibration Dew Point System, Provides Cost Effective Solution for Demanding and Critical Moisture Monitoring Applications. The advantages of a linear high capacitance response are: better sensitivity, better repeatability and faster response times. Also, the measurement system is less prone to noise and drift, and signal conditioning is kept to a minimum. The dew point meter is operated through a menu driven user interface consisting of a custom LCD display with backlight, and four push buttons. This dew point

Handheld Dew Point Metermodel ATS 301D with range of -60 to +30 deg C for the application of compressed air/Nitrogen applicationall 4 parameter RH, TEMP, dew point and moisture on single display.

Features:

• USB/RS232 computer interface
• High back up lithium battery
• High reolution graphics display 128 x 64

portable single/multi gas monitor ( model ats-103m )

introduction:-

portable and multi-gas detector simultaneously monitors and displays up to

five gases. the compact and field tough ats-103m features a non-intrusive

integrated sampling pump designed for performance, reliability and ease-ofuse.

it's optional data logging and computer interface features can be used for

further detailed analysis.

specification:-

gases detected : ch4/lel, o2, h2s, co

measuring range :

ch4: (0.005.00)%vol (optional)

lel: (0100)%lel

o2 : (030.0)%vol

h2s: (0100)ppm

co: (01000) ppm

resolution ratio : ch4: 0.01, lel: 1%lel, o2: 0.1%vol, h2s:1ppm, co: 1ppm

sensor : high quality catalytic sensor for lel

electrochemical sensor for h2s, co & o2

sensor lifetime : 2years

response time : ch4: 20s ( t90 ), lel: 20s ( t90 ), o2: 35s(t90),

h2s: 45s ( t90 ), co: 45s (t90)

alarms : audible--buzzer with 85db @1m audible

visible--flashing red led, 20m visible

vibration

alarm point : high and low, fully adjustable

temperature : -25 deg. c to +55 deg. c

continuous working time : 13hours

display : liquid crystal display(lcd)

battery : 3.7v/1500ma

charging time : 4-5 hours

dust and water resistance : ip67

size & weight : 136*70*37mm, 250g

options:-

on start up, the instrument automatically goes through complete self integrity check,

on demand. the press of sampling switch initiates the sampling through suction

analysis and digitally displays the results. hold key enables monitor/analysis for

a particular parameter of interest.

portable single/multi gas monitor ( model ats-103m )

introduction:

portable and multi-gas detector simultaneously monitors and displays up to

five gases. the compact and field tough ats-103m features a non-intrusive

integrated sampling pump designed for performance, reliability and ease-ofuse.

it's optional data logging and computer interface features can be used for

further detailed analysis.

special features:

automatic operation

self diagnostic check

proven sensor technology

continuous, stable alphanumeric

display

customized visual & sound alarms

suitable for use in hazardous area

class-1, div.-1, groups a, b, c & d

zone 0 of gas group iic

diffusion or suction sampling

long life rechargeable batteries

data logging and rs 232 output capability

operation modes: real time always ready

light weight, handy and simple to use

sampling probe

csir-cimfr approved

specification:

gases detected : ch4/lel, o2, h2s, co

measuring range :

ch4: (0.005.00)%vol (optional)

lel: (0100)%lel

o2 : (030.0)%vol

h2s: (0100)ppm

co: (01000) ppm

resolution ratio : ch4: 0.01, lel: 1%lel, o2: 0.1%vol, h2s:1ppm, co: 1ppm

sensor : high quality catalytic sensor for lel

electro chemical sensor for h2s, co & o2

sensor lifetime : 2years

response time : ch4: 20s ( t90 ), lel: 20s ( t90 ), o2: 35s(t90),

h2s: 45s ( t90 ), co: 45s (t90)

alarms : audible--buzzer with 85db @1m audible

visible--flashing red led, 20m visible

vibration

alarm point : high and low, fully adjustable

temperature : -25 deg. c to +55 deg. c

continuous working time : 13hours

display : liquid crystal display(lcd)

battery : 3.7v/1500ma

charging time : 4-5 hours

dust and water resistance : ip67

size & weight : 136*70*37mm, 250g

Hydrogen Purity Analyzer Model ATS-202A

 

Applications :

• Hydrogen Cooled Alternators & Turbine
• Hydrogen Analysis 
• MAP (Food Gas Packaging)
• Gasification & Syngas
• Metal Heat Treatment Plant
• Laboratories & Institutions
• Treatment Process & Chemical Industries
• Petrochemical & Pharmaceutical Industries
• Simple Low Cost maintenance
• Microcontroller based embedded intelligent instruments
• H2 gas Range : 85-100%V/V
• Tri Gas Range 0-100% CO2 in Air , 0-100% H2 In CO2 and 90-100%H2 in Air
• User friendly Interface
• Direct Plug In Or Auto Suction Sampling 
• 128 x 64 Graphics LCD Display
• USB/RS 232 Computer Interface
• Long Life Rechargeable Li-IONE Battery

Online Continuous Emission Monitoring Systems (OCEMS) 

Make: Applied Techno Systems

Model: ATS 208A 

Approval Certificate : TUV

With Remote calibration facility 

Applied Techno Systems is Inginiuos manufacturer of OCEMS Model ATS 208A which includes Gas ANalyser, Gas Sampling Systems, Tempreture , flow & Opacity dust Monitoring Systems with real time data transmission Systems to CPCB & SPCB.Applied Continuous Emission Montoring CEMS fullfill the environmental regulatory compliance of various industrieal sources of air pollutant.

• Microcontroller based embedded intelligent instruments
• Continuous Monitoring of CO2 , CH4, CO, O2, SO2, NOX (NO NO2), H2, H2S, N2
• Duel wavelength Infra red sensor for Long terms accuracy and stability
• Long Life Electrochemical sensor
• Six Gas Analysis in Single Analyser
• Multi Parameter Single 320 X 240 Graphics LCD Display
• Self diagnostic & Self integrity check
• RS 232/RS 485 and USB Computer Interface
• Excellent low level capability for NOX and SO2 Measurement
• For most of the application sample gas is cooled and dried inside the sampling conditioning systems to avoid the Heated Sample Line.
• Analog 4-20mA output for each gas
• Software solutions for Gas Analysis
• Web Based Real time data transfer

online so2 gas analyzer

we are indiginuous manufacture of onloine so2 analyzer model ats 208a

Industrial Oxygen Monitor. Our offered monitor is precisely manufactured at our highly developed manufacturing unit under the direction of highly skilled professionals. Tested against different quality parameters, this monitor is broadly demanded in the market. We offer our quality-approved samplers as per the requirements of the customers at market leading prices.

Features:

• Excellent performance.
• Reliable operation.
• Less power consumption.

Methane Gas Monitor/ Methane gas detector /portable methane gas detector

.In line with clients' diverse requirements across the country, we are offering an excellent range ofMethane Gas Monitor. This monitor is designed at our advanced manufacturing unit using the best quality components and latest technology in conformance with defined quality standards. It is used to industrial hygienists, occupational health and safety personnel and indoor air quality professionals to assess air quality in the workplace in accordance with state and national guidelines. Being a quality-oriented organization, we assure our clients that this monitor is excellent on counts of durability and quality.

Features:

• Sturdy structure
• High functionality
• Low maintenance cost

Application:

• Compressed Air, Vacuum or any Gases Leak Detection
• Mechanical inspection
• Stream Traps Testing and Maintenance
• Valve Testing.
• Microcontroller based embedded intelligent instruments
• 128 x 64 Graphics LCD Display
• Diffusion or Auto Suction Sampling Mode.
• Long Life Rechargeable Li-Ione Battery
• Data Logger with RS 232 and USB Computer Interface
• Personal Monitoring
• Confined space entry
• Pulp & Paper
• Chemical Plants
• Refineries/Petrochemical
• Hazardous Area
• Water/West water Treatment
• Fire Services
• Mines

online continuous emission monitoring systems ocems

we are indiginuous manufacturer of online continuous stack emmission monitoring systems based on ndir technology with real time data connectivity to cpcb and spcb

approval : TUV

The New Generation features self Diagnostics, Smart operation and maintenance

Remote calibration and operation

Internet/ GPRS /LAN To Monitoring Centers

Portable Oxygen Purity Analyze/hospital oxygen purity analyzer

Portable Oxygen Purity Analyzer for the measurment of Oxygen Purity with range 0.00-99.99 % V/V

portable gas detector

introdduction:

portable and multi-gas detector simultaneously monitors and displays up to

five gases. the compact and field tough ats-103m features a non-intrusive

integrated sampling pump designed for performance, reliability and ease-ofuse.

it's optional data logging and computer interface features can be used for

further detailed analysis.

special feature:

automatic operation

self diagnostic check

proven sensor technology

continuous, stable alphanumeric

display

customized visual & sound alarms

suitable for use in hazardous area

class-1, div.-1, groups a, b, c & d

zone 0 of gas group iic

diffusion or suction sampling

long life rechargeable batteries

data logging and rs 232 output capability

operation modes: real time always ready

light weight, handy and simple to use

sampling probe

csir-cimfr approved

specification:

gases detected : ch4/lel, o2, h2s, co

measuring range :

ch4: (0.005.00)%vol (optional)

lel: (0100)%lel

o2 : (030.0)%vol

h2s: (0100)ppm

co: (01000) ppm

resolution ratio : ch4: 0.01, lel: 1%lel, o2: 0.1%vol, h2s:1ppm, co: 1ppm

sensor : high quality catalytic sensor for lel

electrochemical sensor for h2s, co & o2

sensor lifetime : 2years

response time : ch4: 20s ( t90 ), lel: 20s ( t90 ), o2: 35s(t90),

h2s: 45s ( t90 ), co: 45s (t90)

alarms : audible--buzzer with 85db @1m audible

visible--flashing red led, 20m visible

vibration

alarm point : high and low, fully adjustable

temperature : -25 deg. c to +55 deg. c

continuous working time : 13hours

display : liquid crystal display(lcd)

battery : 3.7v/1500ma

charging time : 4-5 hours

dust and water resistance : ip67

size & weight : 136*70*37mm, 250g

on start up, the instrument automatically goes through complete self integrity check,

on demand. the press of sampling switch initiates the sampling through suction

analysis and digitally displays the results. hold key enables monitor/analysis for

a particularparameter of interest.

Portable Air Quality Monitor Model No Y09/AIR QULITY DETECTING SYSTEM/DUST MONITERING SYSTEM

An Air Quality Monitoring Station (AQMS) isa system that measures metrological parameters such as wind speed, wind direction, rainfall, radiation, temperature, barometric pressure and ambient parameters

STACK MONITERING SYSTEM /STACK EMMISION MONITERTING SYSTEMS/ ONLINE STACK GAS ANALYZER

APPLICATION

Gas turbines

Power plants

Boiler systems - coal, oil and gas fired

Incinerators - domestic, hazardous,

clinical and biological waste

Wood, sawdust, pellet and bark burners

Thermal oxidizers

Pulp and paper

Cement & lime manufacture

Gas pipeline compressors

Bio-fuel power generation

Petrochemical and refineries

Combustion efficiency measurement

option for a Optimization process

efficiency where all maintenance carried

out on-site condition are changing

FEATURES

Fully integrated system up to 6 gases

in a single compact analyzer.

Wide measurement range from 0 - 100

PPM up to 0 - 10, 000 PPM.

Widely accepted, certified performance

complies with the latest monitoring

standards.

Simple installation & maintenance

requires no specialist skills or

training, all maintenance carried out

on-site.

Highest measurement performance ultra

- low drift measurement technology.

Measured Total NOx (NO+NO2) separate

sensors for true NOx monitoring.

Record and store vital emission data

internal data logging function.

Features :

• Easy to use
• Reliable operation
• Precisely designed

Other Details :

• A Dust particulate monitor is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. The particulate monitor uses a technology known as Triboelectric or Triboelectricity.
• When two different materials come in contact, it is likely that one will leave with more electrons than it started with and the other will leave with less, this is called Triboelectric Effect. The interaction between the probe and particles produces a charge transfer within the probe. The charge is then converted to an output signal.
• The advanced electronics of the Monitor detect this signal and present it to the operator via a modulating Graphical display.

model ATS-101M is Portable Single/Dubel Gas Detectors are capableof detecting Oxygen, Toxic, and Combustible gases making themideal for use in various environments. Compact, Light WeightIntelligent Unit with Application Specific Sensors Sensitive toPPB / PPM or % levels of Gases & Vapors.

The advanced Micro controller technology employed makes these ALERT METERS highly dependable, reliable and accurate. The complete automatic operation and calibration feature leaves noscope for user error.

online effluent monitoring systems

we offer online effluent monitoring systems for the measurement of cod bod tss ph and flow with real time data transmission to cpcb and spcb server.

our online monitoring systems is based on uv absorption technology with auto sensor cleaning systems.

we offer temper proof data equitation systems for real time data transmission to cpcb and state pollution control board.

We have gained a remarkable position in the industry by offering a qualitative assortment ofHandheld Dust Monitorthat is used to monitor the suspended Particulate concentration in the air. The offered monitor is manufactured employing high-end technology and well-tested components in observance to industry defined guidelines. Apart from this, the entire range is scrupulously tested under the strict inspection of our quality controllers. This range can be availed from us in various specifications at market leading prices.

Features:

• Long service life
• Precisely design
• Require less maintenance

Other Details:

• Sampling dust and particulate matter is important as dust and particulate matter can affect the health of humans, as well as the natural environment.
• Dust and particulate matter can cause respiratory problems when breathed in by humans. Dust and particulates above 10 micrometer (PM10) are filtered and generally do not enter the lungs.
• Dust and particulate matter that is smaller than 10 micrometers (PM10, PM2.5, PM1.0) can enter into the Alveoli where gas exchange occurs.
• This PM2.5 is more dangerous as it can affect the exchange of gases within the lungs and even penetrate the lung into the blood stream and cause other health issues.
• PM10 , PM2.5 and PM1.0 are the normal sampling standards found throughout the world, they represent the particulate pollution that effects human health and thus sampling them provides an accurate insight into how dust and particulate matter effect human health.
• Handheld/Portable PM Monitor is used to monitor the suspended Particulate concentration in the air with measuring range 0.001mg/M3 to 10 mg/M3.
• It adopts optical scattering technique. This type of Product has many advantages, such as fast detection speed, high accuracy, light and small, easy operation, measuring and displaying of 3 channels at the same time.
• It adopts the method of automatic measurement, improving the work efficiency effectively.

Specification :

• Measuring principle Optical scattering technology
• Light Source Laser Diode
• Detection Range 0.001 10mg/m3
• Display LCD
• Size Channel PM10, PM2.5, PM1.0
• Flow Rate 2.83L/min (Imported Pump)
• Sample Time 0-9999s Selectable
• Zero Count
• Printer External thermal printer
• Data Storage 1000
• Operating Time 5 hours
• Outside Dim 130*220*45(Wide*High*Deep)
• Weight 0.6kg
• Temperature 15degree Celsius
• Humidity
• Atmosphere Pressure 86-106Kpa

Opacity Monitor

Double Pass Dust Monitor for monitoring dust emissions using DDP. FEATURES Innovative Dynamic Detection Principle (DDP) measurement technique Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift Measurement reading as mg/m3 (when calibrated against standard reference measurements) Rugged 316 stainless steel construction Choice of interface options enabling easy integration Free utility software for PC based set-up, control and data logging Optional Operator Interface with different mounting configurations BENEFITS Significantly less susceptible to drift than standard opacity monitors Better