Write a Review
Our Products
Our Complete range of products are Grounding Connector, Transformer Connector, Transformer Spades Connector, Compression Connector and Brass Insert.
Bronze Connectors Copper Connectors Brass Grounding Clamps Bronze grounding Clamps Copper Grounding Clamps Grounding Rod Connectors
Any kind of Grounding Connectors can be developed and supplied exactly as per customer specifications in drawing.
BRONZE TERMINAL CAPS (EYE BOLT)
Cast of high-strength copper alloyTransformer Tank ground connector
Any kind of Transformer Connectors can be developed and supplied exactly as per customer specifications in drawing.
Cast of high conductivity, corrosion resistant bronze and electro-tin plated. For use with aluminum or copper wire connectors. NEMA spacing of the 9/16" diameter. holes will accommodate bolted or compression terminal lugs.
| number of holes | Figure number | thread size | dimensions in inches | ||||
|---|---|---|---|---|---|---|---|
| D | L | S | T | W | |||
| 2 | 1 | 1/2" - 13 | 7/8 | 5 1/16 | 3 1/2 | 3/8 | 1 1/2 |
| 4 | 3 | 1/2" - 13 | 7/8 | 8 9/16 | 7 | 3/8 | 1 1/2 |
| 4 | 2 | 1/2" - 13 | 7/8 | 4 15/16 | 4 1/8 | 3/8 | 3 1/2 |
| 2 | 1 | 5/8" - 11 | 7/8 | 5 1/16 | 3 1/2 | 3/8 | 1 1/2 |
| 4 | 3 | 5/8" - 11 | 7/8 | 8 9/16 | 7 | 3/8 | 1 1/2 |
| 4 | 2 | 5/8" - 11 | 7/8 | 4 15/16 | 4 1/8 | 3/8 | 3 1/2 |
| 4 | 3 | 1" - 14 | 1 3/8 | 8 7/8 | 7 1/16 | 3/8 | 1 15/16 |
| 4 | 2 | 1" - 14 | 1 3/8 | 5 3/8 | 4 1/8 | 3/8 | 3 1/2 |
BSP, UNF, BSPT & NPT
Material :Brass (BS-249), Bronze.
Available in many combinations of sizes, multi-step reductions, and shapes other than above mentioned.
1/4", 5/16", 3/8", 1/2", 5/8"
Material :Brass, Copper, Aluminum
Any kind of Male Branch Tee Compression Fittings can be developed and supplied exactly as per customer's specifications.
Available in Brass / Nickle & Chrome Finish
Threads :BSP & BSPT (Parallel & Taper Threads)
Size :1/2" to 2"
Finish :Designed & developed as per customer's requirement.
High purity copper
Applications :Connecting or tapping-off copper conductors
Create an earthing network or tapping-off from overhead distribution lines
Suitable for :Branch connection
Parallel/Joint connection
Joining running conductors
High Tensile Brass to BS 2874-CZ 112Also available in High Conductive Copper
Finish :Natural Brass / Electro Tinned
Sizes :10 mm2 to 500 mm2
Application :Available in round and hexagonal shapes in length of 50, 60 and 70 mm
16 amp to 100 amp or as per customer specification.
Material :High Grade Free Cutting Brass, Brass as per IS 319 (Type 1), Brass as per BS (Type 1) or As per customer specifications.Any special Brass Material Composition as per customers requirement.
Finish And Coating :Natural, Nickel Plated, Tin Plated, Natural Brass or any coating as per customer specification.
Threads :ISO Metric (MM Threads)BA ThreadsBSW Threads (Inches)UNC, UNF ThreadsAny threads as per custom design.
Length / Size :As per Specifications or custom designs.
Application :HRC fuse connectors and HRC fuse links are used in Instrumentation, Telecommunications, and other Plastic Cases Assembly.
We have a strict online quality control systems. We can make products in an accurate size / Tolerance 0.02 to 0.00 or as per customers drawings and specifications. Our products is being supplied to various companies in India and abroad.Any kind of brass electrical connectors can be developed and supplied exactly as per customer specifications.
CPVC Brass inserts are used for CPVC molding for sewerage and daring pipe fittings elbows and Pipe couplings.
Length / Size :from 1/4"mm -3/4" mm
Finish And Coating :Natural, Nickle Plated, Tin Plated or any coating as per customer specification
18-8 ss, 316 ss, 400 series ss, Brass, Silicone Bronze, Monel, Carbon Steels, Alloy Steels, Aluminum.
Finishes Include:Zinc, Cadmium, Nickel Silver & Chrome Plating, Black Oxide, Anodize, Passivation and Heat Treating.
Slotted Nuts are used for general purpose fastening and locking. The slots are for the insertion of a cotter pin or safety wire to secure the nut when used with a drilled shank fastener. The slotted and castle styles are both interchangeable with the slotted design now the preferred style.
| F | G | H | T | S | Runout | |||||||||
| Nominal Size | Width | of | ||||||||||||
| or Basic Major | Across | Thickness | Unslotted | Width of | Bearing | |||||||||
| Diameter | Width | Across | Flats | Corners | Tickness | Slot | Surface | |||||||
| of Thread | Basic | Max | Min | Max | Min | Basic | Max | Min | Max | Min | Max | Min | Max | |
| 1/4" | 0.2500 | 7/16" | 0.438 | 0.428 | 0.505 | 0.488 | 7/32" | 0.226 | 0.212 | 0.014 | 0.012 | 0.100 | 0.070 | 0.015 |
| 5/16" | 0.3125 | 1/2" | 0.500 | 0.489 | 0.577 | 0.557 | 17/64" | 0.273 | 0.258 | 0.180 | 0.160 | 0.120 | 0.090 | 0.016 |
| 3/8" | 0.3750 | 9/16" | 0.562 | 0.551 | 0.650 | 0.628 | 21/64" | 0.337 | 0.320 | 0.210 | 0.190 | 0.150 | 0.120 | 0.017 |
| 7/16" | 0.4375 | 11/16" | 0.688 | 0.675 | 0.794 | 0.768 | 3/8" | 0.385 | 0.365 | 0.230 | 0.210 | 0.150 | 0.120 | 0.018 |
| 1/2" | 0.5000 | 3/4" | 0.750 | 0.736 | 0.866 | 0.840 | 7/16" | 0.448 | 0.427 | 0.290 | 0.270 | 0.180 | 0.150 | 0.019 |
| 9/16" | 0.5625 | 7/8" | 0.875 | 0.861 | 1.010 | 0.982 | 31/64" | 0.496 | 0.473 | 0.310 | 0.290 | 0.180 | 0.150 | 0.020 |
| 5/8" | 0.6250 | 15/16" | 0.938 | 0.922 | 1.083 | 1.051 | 35/64" | 0.559 | 0.535 | 0.340 | 0.320 | 0.240 | 0.180 | 0.021 |
| 3/4" | 0.7500 | 1-1/8" | 1.125 | 1.088 | 1.299 | 1.240 | 41/64" | 0.665 | 0.617 | 0.400 | 0.380 | 0.240 | 0.180 | 0.023 |
| 7/8" | 0.8750 | 1-5/16" | 1.312 | 1.269 | 1.516 | 1.447 | 3/4" | 0.776 | 0.724 | 0.520 | 0.490 | 0.240 | 0.180 | 0.025 |
| 1" | 1.0000 | 1-1/2" | 1.500 | 1.450 | 1.732 | 1.653 | 55/64" | 0.887 | 0.831 | 0.590 | 0.560 | 0.300 | 0.240 | 0.027 |
| 1-1/8" | 1.1250 | 1-11/16" | 1.688 | 1.631 | 1.949 | 1.859 | 31/32" | 0.999 | 0.939 | 0.640 | 0.610 | 0.330 | 0.240 | 0.030 |
| 1-1/4" | 1.2500 | 1-7/8" | 1.875 | 1.812 | 2.165 | 2.066 | 1-1/16" | 1.094 | 1.030 | 0.700 | 0.670 | 0.400 | 0.310 | 0.033 |
| 1-3/8" | 1.3750 | 2-1/16" | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64" | 1.206 | 1.138 | 0.820 | 0.780 | 0.400 | 0.310 | 0.036 |
| 1-1/2" | 1.5000 | 2-1/4" | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32" | 1.317 | 1.245 | 0.860 | 0.820 | 0.460 | 0.370 | 0.039 |
1/2" x 3/8"
Available in :Brass Finish and Chrome Plating Light / Medium / Heavy weight
Material :Free Cutting Brass IS 319 Type (I)Free Cutting Brass as per BS 249 Type (I)High Grade Free Cutting Brass.Any Special Brass Material Composition as per customers requirement
Finish And Coating :Natural Finish, Nickle Plated, Tin Plated.
Threads :BSP Threads, NPT Threads
Mehul Doshi (Apple International Engg. Works)
B- 19, Sankar Tekrai, Udhyog Nagar., Udyog Nagar, Jamnagar, Gujarat - 361004, India
Share us via
