Fiberglass Mesh is a ready-to-use, thin, strong yet flexible alkali resistant mesh for embedment with waterproofing and crack-isolation membrane on residential and commercial floors & walls of sunk portions and top roof terrace. Fiberglass Mesh reinforces and improves the performance of Hydro build’s waterproofing products when applied over cracks, coves and corners and around drains on residential and commercial applications. Fiberglass Mesh can be cut to size with scissors or a razor knife, and has excellent compatibility with all cement or epoxy based mortars.

PRODUCT FEATURES

• Easy to apply. Single Component Polymerized Drymix Block Jointing Mortar
• Only the required quantity of water needs to be added at site.
• Joint bed thickness of 2 mm to 3 mm only.
• Quick-drying & Rapid setting.
• High Water Resistant Mortar due to perfect compaction - Provides water-tight block joints.
• Better water retention properties.

Water curing is not required after application.

• Reduced Shrinkage.
• No raking of joints is required before plastering

BENEFITS

• Higher productivity – Fast setting mortar allows continuous laying and takes less time than conventional mortar combined with good workability and spreadability of mortar.
• Increases speed of construction – only 24 hours required before next stage like plastering, coating etc.
• The quick setting properties of the mortar eliminate any restriction on the height of walls that can be built in a day.
• Improved flow/”spread under the trowel, ” workability, water retention and open time, shrinkage reduction and improved bond strength because of the addition of Proprietary Additives in the formulation.
• Eliminates the need for bulk sand and cement storage at site. 80% storage space is saved at site.
• More Cost-effective since lesser quantity is consumed with negligible wastage.
• Better water retention properties and is Self Curing.
• Seepages and water penetration through joints are negligible.
• Provides solid robust walls with improved overall construction quality.
• Gives better adhesion, more stability and durability.
• Improved build accuracy of finished walls.

Additives

• Performance-enhancing Proprietary additives to improve
• Spreadability & Workability 
• Strength & Durability
• High Bond Strength
• Non – Shrinkage
• Water-Resistant
• Water Retention

Practical Consumption

• Around 120 sq.ft. to 130 sq.ft. for 4” AAC block wall. Around 80 sq.ft. to 86 sq.ft. for 6” AAC block wall.
• This may vary from site to site and from applicator to applicator

Application

• Internal partition walls
• Foundation
• Garden Wall & Planters
• Retaining Wall
• Steps
• Solid Patio
• Acoustic separating party walls
• Inner & outer leaf of external cavity walls over 3 storied

Advantage

• Greatly Reduced Construction Cost
• Extremely Durable
• Energy Saver
• Design Flexibility
• Reduced Maintenance Costs
• High Strength
• Superior finish(In many areas plastering is not required: where required, only a thin layer of the cost of plaster is adequate.)
• Straight edges and corners (Leading to a reduction in use of mortar by more than 50% ) and facilitates quick construction. Zero breakages

Cement concrete hollow blocks are modern construction materials and as such are used in all the constructions viz. residential, commercial and industrial building constructions. The demand for this product is always high in all cities and other urban centers due to the construction of residential apartments, commercial buildings and industrial buildings.

Application

• Foundation walls - typically rock-faced.
• Basement walls.
• Partition walls - usually plain-faced.
• Exterior walls - usual plain-faced and then often covered with stucco.
• Most concrete hollow blocks are used as a backup material or for cavity wall construction.

Advantage

• Highly Durable
• Good Resistance to Fire
• Low Maintenance
• Thermal & Sound Insulation
• Environmental Friendly
• Cost Savings of upto 40%

Avail from us a quality assortment of Cold Dipped GI Wire. Quality tests are carried out by the experts to ensure only the best variety of Galvanized Iron wires is dispatched in the market. At market-leading prices we offer the Galvanized Iron Wire within the scheduled time frame. 

Product Details :

• 14 Gauge (1.80 mm to 2.00 mm)  
• 16 Gauge (1.50 mm to 1.60 mm)  
• 18 Gauge (1.10 mm to 1.20 mm)  
• 20 Gauge (0.90 mm to 1.00 mm)  

Plaster Masters Ecoplast is cement-based quality material composed of hydraulic binders, high-quality graded sand, and special additives.  It is supplied as dry powder in pre-weighed bags ready to use on site, which requires only the addition of clean water to produce cohesive mortar, it contains special additives to provide good adhesion and shrinkage control.

Plaster Masters Ecoplast is used for masonry, civil repair, plastering on inner and outer walls.  It can be used on brick, block, stone walls as well as concrete surface.

ADVANTAGES

• Consistent quality
• Easy to carry, use and apply
• Fixed mortar ratio
• Minimum rebound losses
• Almost no curing
• Reduced shrinkage cracks
• Time-saving
• Durable, smooth & excellent finish

METHOD OF APPLICATION

SURFACE PREPARATION

The surface should be clean, sound and free from loose material, grease, oil paint etc.  Prior to Plaster Masters Ecoplast application, soak the entire surface with clean water.

MIXING

Mix Plaster Masters Ecoplast with 12-13 % water by weight of the material.  Stir for 2-3 min, to have a consistency free of lumps.

APPLICATION

Plaster Masters Ecoplast can be applied by normal masons just like the conventional method.

CURING

In general, no curing is required for Plaster Masters Ecoplast.  However, when the ambient temperature crosses 30 degrees centigrade, it is recommended to do one curing after 24 hours in order to minimize the rapid evaporation of water from the applied surface.

PACKAGING & STORAGE

40kgs PP bags. The product should be stored in cool and dry place, and to be used within 6 months from date of manufacturing.

SAFETY

Use of dust mask, safety goggles and gloves are recommended.

FEATURES AND BENEFITS OF ASHIRVAD FLOWGUARD® PLUS™ CPVC PIPING SYSTEM

Quick and easy to install Ashirvad FLOWGUARD® PLUSTM CPVC is light in weight which reduces the transportation, handling and installation cost. CPVC pipes and fittings have seamless interior walls and require no special tools for cutting.

• Tough and reliable Highly resilient, tough and durable with high tensile strength and high impact strength.
• Freedom from toxicity, odors and tastes
• Low thermal expansion
• Low thermal conductivity
• Suitable for use up to 930C
• Energy saving
• Smooth internal surface finish
• UV resistant

Product Features :

• Fire-Resistant
• Cost-Effective
• Termite Proof
• Durable
• Easy to Fit
• Eco Friendly
• No Gaps Made to Precision
• Recyclable

Premier TMTs binding wire is an excellent product by the Premier Group, built with the state-of-the-art technology. Binding wire plays a crucial role during construction for holding together footing, beams, slabs, columns together with each other. Our binding wire is flexible and has adequate strength in correct proportions and conforms to industry standards.Premier TMTs binding wire is an excellent product by the Premier Group, built with the state-of-the-art technology. Binding wire plays a crucial role during construction for holding together footing, beams, slabs, columns together with each other. Our binding wire is flexible and has adequate strength in correct proportions and conforms to industry standards.

Benefits:

• Uniform weight packaging and packed by automated machines
• Soft material thus no breakage
• Higher length per kg

Cover blocks are used to maintain a specified distance between the TMT rebar and the shuttering.

Advantage

• To maintain a specified distance between the rebar and the shuttering.
• To protect the steel reinforcement bars from environmental effects to prevent their corrosion.
• To provide thermal insulation, which protects the reinforcement bars from fire.
• To give reinforcing bars sufficient, embedding to enable them to be stressed without slipping.

Waterproofing Chemical - Zycosil Plus + Zycoprime Plus Zycosil Plus Zycosil Plus is a water soluble penetrative solution for waterproofing of masonry building material. Zycosil is Nano technology based as it provides molecular level hydrophobicity to inorganic substrate and it is eco-friendly as it is applied in water solution. The product is based on organosilicon chemistry, hence reacts with the inorganic substrate surface, seals the surface uto a depth of 2-3 mm and provides long service life. The Nano size allows penetration deep into substrate that provides 20+ years water repellency. This product is very economical. Zycosil is 10-20 % of the cost of solvent based silane technology. Zycosil and its diluted solution are non flammable and easy to apply using paint brush, roller or airless spray. No special tools or precautions are necessary to handle the product. It is ideal for making the roof and walls water repellent. Additional Information :- 100% Silane Water soluble nanotechnology Life: 20+ years Penetrative in very fine pores and cracks Reactive, non leachable UV & Heat stable Abrasion resistant Does not break like a surface film Gives long lasting protection ZycoPrime+ ZycoPrime+ is an Acylic co-polymer emulsion, supplied as a ready to use bonding agent in liquid consistency. It is a versatile product and can be used as a cement modifier for repair of spalled concrete - slabs, balconies, beams, columns, floors & waterproofing of toilets, bathrooms and terraces. FEATURES & BENEFITS :- Multipurpose, UV stable & Economical. When used in concrete / plaster, it prevents cracking. It reduces drying and shrinkage cracks. Reduces permeability of water. Improves workability of concrete / plaster. Bonds strongly with concrete, plasters, cementitious surfaces. Reduces viscosity of cement-injection grout and tile adhesives for better fluidity & bonding. APPLICATION AREAS :- Waterproofing Membrane : Roof terraces, sunken portion of toilets & bathrooms, chhajas, balcony, etc. Concrete Repairs : Spalled concrete of slabs, chhajas, beams, columns, parapet, floor, etc. Waterproofing &/or Bonding Primer : Walls & Slabs. APPLICATION METHOD :- Clean the surface with wire brush, scrubber or air blower to remove hidden dirt, loose particles, laitance & dust. De-grease the surface by using suitable solvents, if needed. Bonding Primer To be used as a clear bonding primer by diluting 1:5 with water. Apply on the walls before painting or during putty rendering. Waterproofing Primer For priming of concrete substrate, the surface should be thoroughly saturated with ZycoSil+ solution (Dilution Ratio - 1 part ZycoSil+ : 20 parts potable Water : 2 parts of ZycoPrime+). Waterproofing Membrane For a waterproofing coating mix 1 part ZycoPrime+ with 1 part of cement & 1 part of 100 mesh sand. Add water for brushability. Brush apply the mix in span of 4-6 hours on the prepared concrete substrate. It is recommended to saturate the surface with ZycoSil+ solution prior to this application. Overlay the coating with a protective screed to the desired slope and thickness. Coverage : 4-5 m for a 0.2 mm (200 microns) coat. Repair Mortar & Renders, Floor Screed & PCC Prepare the Mortar in the following proportion: Cement 50 kg Washed Sand 75 kg 6 mm Down size aggregates 75 kg ZycoPrime+ 6-7.5 litres Water 10 litres For PCC & Plaster work : ZycoPrime+ 100 ml per bag cement (conforms to IS 2645 - 2003). APPLICATION DETAIL :- Sr. No. Application Recipe Zycoprime + Qty. 1 Patching & Repair Mortar Portland Cement : 50 kg Washed Sand : 10 KG Water : 10 ltrs 6 - 7.5 ltrs 2 PCC / Plaster Portland Cement : 50 kg 100 ml 3 Waterproofing membrane (ro

Jain Irrigation Systems Ltd. (JISL) derives its name from the pioneering work it did for the Micro Irrigation Industry in India. However, there is more to Jain Irrigation than Irrigation. Jain Piping Division is the largest producer of thermoplastic piping systems for all conceivable applications with pipes ranging from 3 mm to 1600 mm in diameter and in different pressure ratings.

JISL has a production capacity of over 3, 00, 000 M.T. per annum. JISL is the only manufacturer to own DSIR approved R&D setup with state-of-the-art facilities. The pipes are manufactured confirming to IS, DIN, ISO, ASTM, TEC and other customized specifications. The Piping Division includes PE, PVC Pipes and Fittings catering to the urban and rural infrastructure needs of the country apart from the Irrigation needs of the farmers. Jain CPVC plumbing pipes & Fittings for Hot water application is yet another product that will be a forward integration of the above group of infrastructure products. This will convey the hot water with efficiency combined with economy and have a long life.

Standard and Range

Jain Plumbing CPVC pipes are manufactured to IS 15778, from specially formulated compounds conforming to or exceeding the requirements of CPVC compound of cell classification "D.P.110-2-3-2" as per IS 15225.

Features & Advantages

• Manufactured from high-quality NSF Approved CPVC Compound.
• The compound is tested safe for potable water application.
• Wide range of working temperatures and pressures.
• Low thermal expansion.
• The smooth inner wall, no scale build-up or erosion.
• Long-life – as CPVC does not build scale or corrode.
• Excellent impact strength.
• Light in weight, easy to install.
• Energy-efficient, low insulation cost.
• Ability to withstand water flow noise.
• Excellent fire-resistant characteristics.
• Completely leak-proof jointing.
• Durability and long-term reliability.
• Non-Toxic-Lead free.
• Wide range of pipes and fittings.
• Aesthetically pleasing when exposed in the application.

Jain Irrigation Systems Ltd. (JISL) derives its name from the pioneering work it did for the Micro Irrigation Industry in India. However, there is more to Jain Irrigation than Irrigation. Jain Piping Division is the largest producer of thermoplastic piping systems for all conceivable applications with pipes ranging from 3 mm to 1600 mm in diameter and in different pressure ratings.

JISL has a production capacity of over 3, 00, 000 M.T. per annum. JISL is the only manufacturer to own DSIR approved R&D setup with state-of-the-art facilities. The pipes are manufactured confirming to IS, DIN, ISO, ASTM, TEC and other customized specifications. The Piping Division includes PE, PVC Pipes and Fittings catering to the urban and rural infrastructure needs of the country apart from the Irrigation needs of the farmers. Jain CPVC plumbing pipes & Fittings for Hot water application is yet another product that will be a forward integration of the above group of infrastructure products. This will convey the hot water with efficiency combined with economy and have a long life.

Standard and Range

Jain Plumbing CPVC pipes are manufactured to IS 15778, from specially formulated compound conforming to or exceeding the requirements of CPVC compound of cell classification "D.P.110-2-3-2" as per IS 15225.

Features & Advantages

• Manufactured from high-quality NSF Approved CPVC Compound.
• The compound is tested safe for potable water application.
• Wide range of working temperatures and pressures.
• Low thermal expansion.
• Smooth inner wall, no scale build-up or erosion.
• Long life – as CPVC does not build scale or corrode.
• Excellent impact strength.
• Light in weight, easy to install.
• Energy efficient, low insulation cost.
• Ability to withstand water flow noise.
• Excellent fire resistant characteristics.
• Completely leak proof jointing.
• Durability and long term reliability.
• Non-Toxic-Lead free.
• Wide range of pipes and fittings.
• Aesthetically pleasing when exposed in the application.

SILICO READY MIX PLASTER is a polymer-modified premixed cement-based plaster. It is convenient, easy to use, strong and binds better to its substrate. It provides an even surface on which tiling can be done faster & efficiently. READY-MIX PLASTER is specially formulated using graded sand to impart compactness to the plaster. It also contains special polymers which reduce re-bonding losses, thereby increasing the productivity of the labor and has a water-retaining component which reduces the curing requirement of the plaster, when compared to the conventional method.

ADVANTAGES

Consistent quality

• Easy to carry, use and apply
• Fixed mortar ratio
• Minimum rebound losses
• Almost no curing
• Reduced shrinkage cracks
• Time-saving
• Durable, smooth & excellent finish

Ready Mix Plaster

Ready Mix Plaster is cement-based quality material composed of hydraulic binders, high-quality graded sand, and special additives. It is supplied as dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce cohesive mortar, it contains special additives to provide good adhesion and shrinkage control.

Ready Mix Plaster is used for masonry, civil repair, plastering on inner and outer walls.  It can be used on brick, block, stone walls as well as concrete surfaces.

METHOD OF APPLICATION

SURFACE PREPARATION

Surface should be clean, sound and free from loose material, grease, oil paint etc.  Prior to Ready Mix Plaster application, soak the entire surface with clean water.

MIXING

Ready Mix Plasters with 12-13 % water by weight of the material.  Stir for 2-3 min, to have a consistency free of lumps.

APPLICATION

Ready Mix Plaster can be applied by normal masons just like the conventional method.

CURING

In general, no curing is required for Ready Mix Plaster.  However, when the ambient temperature crosses 30 degrees centigrade, it is recommended to do one curing after 24 hours in order to minimize the rapid evaporation of water from applied surface.

PACKAGING & STORAGE

40kgs PP bags. The product should be stored in cool and dry place, and to be used within 6 months from date of manufacturing.

SAFETY

Use of dust mask, safety goggles and gloves are recommended.

Fiberglass Mesh is a ready-to-use, thin, strong yet flexible alkali resistant mesh for embedment with waterproofing and crack-isolation membrane on residential and commercial floors & walls of sunk portions and top roof terrace. Fiberglass Mesh reinforces and improves the performance of Hydro build’s waterproofing products when applied over cracks, coves and corners and around drains on residential and commercial applications. Fiberglass Mesh can be cut to size with scissors or a razor knife, and has excellent compatibility with all cement or epoxy based mortars.

PRODUCT FEATURES

• Easy to apply. Single Component Polymerized Drymix Block Jointing Mortar
• Only the required quantity of water needs to be added at site.
• Joint bed thickness of 2 mm to 3 mm only.
• Quick-drying & Rapid setting.
• High Water Resistant Mortar due to perfect compaction - Provides water-tight block joints.
• Better water retention properties.

Water curing is not required after application.

• Reduced Shrinkage.
• No raking of joints is required before plastering

BENEFITS

• Higher productivity – Fast setting mortar allows continuous laying and takes less time than conventional mortar combined with good workability and spreadability of mortar.
• Increases speed of construction – only 24 hours required before next stage like plastering, coating etc.
• The quick setting properties of the mortar eliminate any restriction on the height of walls that can be built in a day.
• Improved flow/”spread under the trowel, ” workability, water retention and open time, shrinkage reduction and improved bond strength because of the addition of Proprietary Additives in the formulation.
• Eliminates the need for bulk sand and cement storage at site. 80% storage space is saved at site.
• More Cost-effective since lesser quantity is consumed with negligible wastage.
• Better water retention properties and is Self Curing.
• Seepages and water penetration through joints are negligible.
• Provides solid robust walls with improved overall construction quality.
• Gives better adhesion, more stability and durability.
• Improved build accuracy of finished walls.

Additives

• Performance-enhancing Proprietary additives to improve
• Spreadability & Workability 
• Strength & Durability
• High Bond Strength
• Non – Shrinkage
• Water-Resistant
• Water Retention

Practical Consumption

• Around 120 sq.ft. to 130 sq.ft. for 4” AAC block wall. Around 80 sq.ft. to 86 sq.ft. for 6” AAC block wall.
• This may vary from site to site and from applicator to applicator

Application

• Internal partition walls
• Foundation
• Garden Wall & Planters
• Retaining Wall
• Steps
• Solid Patio
• Acoustic separating party walls
• Inner & outer leaf of external cavity walls over 3 storied

Advantage

• Greatly Reduced Construction Cost
• Extremely Durable
• Energy Saver
• Design Flexibility
• Reduced Maintenance Costs
• High Strength
• Superior finish(In many areas plastering is not required: where required, only a thin layer of the cost of plaster is adequate.)
• Straight edges and corners (Leading to a reduction in use of mortar by more than 50% ) and facilitates quick construction. Zero breakages

Cement concrete hollow blocks are modern construction materials and as such are used in all the constructions viz. residential, commercial and industrial building constructions. The demand for this product is always high in all cities and other urban centers due to the construction of residential apartments, commercial buildings and industrial buildings.

Application

• Foundation walls - typically rock-faced.
• Basement walls.
• Partition walls - usually plain-faced.
• Exterior walls - usual plain-faced and then often covered with stucco.
• Most concrete hollow blocks are used as a backup material or for cavity wall construction.

Advantage

• Highly Durable
• Good Resistance to Fire
• Low Maintenance
• Thermal & Sound Insulation
• Environmental Friendly
• Cost Savings of upto 40%

Avail from us a quality assortment of Cold Dipped GI Wire. Quality tests are carried out by the experts to ensure only the best variety of Galvanized Iron wires is dispatched in the market. At market-leading prices we offer the Galvanized Iron Wire within the scheduled time frame. 

Product Details :

• 14 Gauge (1.80 mm to 2.00 mm)  
• 16 Gauge (1.50 mm to 1.60 mm)  
• 18 Gauge (1.10 mm to 1.20 mm)  
• 20 Gauge (0.90 mm to 1.00 mm)  

Plaster Masters Ecoplast is cement-based quality material composed of hydraulic binders, high-quality graded sand, and special additives.  It is supplied as dry powder in pre-weighed bags ready to use on site, which requires only the addition of clean water to produce cohesive mortar, it contains special additives to provide good adhesion and shrinkage control.

Plaster Masters Ecoplast is used for masonry, civil repair, plastering on inner and outer walls.  It can be used on brick, block, stone walls as well as concrete surface.

ADVANTAGES

• Consistent quality
• Easy to carry, use and apply
• Fixed mortar ratio
• Minimum rebound losses
• Almost no curing
• Reduced shrinkage cracks
• Time-saving
• Durable, smooth & excellent finish

METHOD OF APPLICATION

SURFACE PREPARATION

The surface should be clean, sound and free from loose material, grease, oil paint etc.  Prior to Plaster Masters Ecoplast application, soak the entire surface with clean water.

MIXING

Mix Plaster Masters Ecoplast with 12-13 % water by weight of the material.  Stir for 2-3 min, to have a consistency free of lumps.

APPLICATION

Plaster Masters Ecoplast can be applied by normal masons just like the conventional method.

CURING

In general, no curing is required for Plaster Masters Ecoplast.  However, when the ambient temperature crosses 30 degrees centigrade, it is recommended to do one curing after 24 hours in order to minimize the rapid evaporation of water from the applied surface.

PACKAGING & STORAGE

40kgs PP bags. The product should be stored in cool and dry place, and to be used within 6 months from date of manufacturing.

SAFETY

Use of dust mask, safety goggles and gloves are recommended.

FEATURES AND BENEFITS OF ASHIRVAD FLOWGUARD® PLUS™ CPVC PIPING SYSTEM

Quick and easy to install Ashirvad FLOWGUARD® PLUSTM CPVC is light in weight which reduces the transportation, handling and installation cost. CPVC pipes and fittings have seamless interior walls and require no special tools for cutting.

• Tough and reliable Highly resilient, tough and durable with high tensile strength and high impact strength.
• Freedom from toxicity, odors and tastes
• Low thermal expansion
• Low thermal conductivity
• Suitable for use up to 930C
• Energy saving
• Smooth internal surface finish
• UV resistant

Product Features :

• Fire-Resistant
• Cost-Effective
• Termite Proof
• Durable
• Easy to Fit
• Eco Friendly
• No Gaps Made to Precision
• Recyclable

Premier TMTs binding wire is an excellent product by the Premier Group, built with the state-of-the-art technology. Binding wire plays a crucial role during construction for holding together footing, beams, slabs, columns together with each other. Our binding wire is flexible and has adequate strength in correct proportions and conforms to industry standards.Premier TMTs binding wire is an excellent product by the Premier Group, built with the state-of-the-art technology. Binding wire plays a crucial role during construction for holding together footing, beams, slabs, columns together with each other. Our binding wire is flexible and has adequate strength in correct proportions and conforms to industry standards.

Benefits:

• Uniform weight packaging and packed by automated machines
• Soft material thus no breakage
• Higher length per kg

Cover blocks are used to maintain a specified distance between the TMT rebar and the shuttering.

Advantage

• To maintain a specified distance between the rebar and the shuttering.
• To protect the steel reinforcement bars from environmental effects to prevent their corrosion.
• To provide thermal insulation, which protects the reinforcement bars from fire.
• To give reinforcing bars sufficient, embedding to enable them to be stressed without slipping.

Waterproofing Chemical - Zycosil Plus + Zycoprime Plus Zycosil Plus Zycosil Plus is a water soluble penetrative solution for waterproofing of masonry building material. Zycosil is Nano technology based as it provides molecular level hydrophobicity to inorganic substrate and it is eco-friendly as it is applied in water solution. The product is based on organosilicon chemistry, hence reacts with the inorganic substrate surface, seals the surface uto a depth of 2-3 mm and provides long service life. The Nano size allows penetration deep into substrate that provides 20+ years water repellency. This product is very economical. Zycosil is 10-20 % of the cost of solvent based silane technology. Zycosil and its diluted solution are non flammable and easy to apply using paint brush, roller or airless spray. No special tools or precautions are necessary to handle the product. It is ideal for making the roof and walls water repellent. Additional Information :- 100% Silane Water soluble nanotechnology Life: 20+ years Penetrative in very fine pores and cracks Reactive, non leachable UV & Heat stable Abrasion resistant Does not break like a surface film Gives long lasting protection ZycoPrime+ ZycoPrime+ is an Acylic co-polymer emulsion, supplied as a ready to use bonding agent in liquid consistency. It is a versatile product and can be used as a cement modifier for repair of spalled concrete - slabs, balconies, beams, columns, floors & waterproofing of toilets, bathrooms and terraces. FEATURES & BENEFITS :- Multipurpose, UV stable & Economical. When used in concrete / plaster, it prevents cracking. It reduces drying and shrinkage cracks. Reduces permeability of water. Improves workability of concrete / plaster. Bonds strongly with concrete, plasters, cementitious surfaces. Reduces viscosity of cement-injection grout and tile adhesives for better fluidity & bonding. APPLICATION AREAS :- Waterproofing Membrane : Roof terraces, sunken portion of toilets & bathrooms, chhajas, balcony, etc. Concrete Repairs : Spalled concrete of slabs, chhajas, beams, columns, parapet, floor, etc. Waterproofing &/or Bonding Primer : Walls & Slabs. APPLICATION METHOD :- Clean the surface with wire brush, scrubber or air blower to remove hidden dirt, loose particles, laitance & dust. De-grease the surface by using suitable solvents, if needed. Bonding Primer To be used as a clear bonding primer by diluting 1:5 with water. Apply on the walls before painting or during putty rendering. Waterproofing Primer For priming of concrete substrate, the surface should be thoroughly saturated with ZycoSil+ solution (Dilution Ratio - 1 part ZycoSil+ : 20 parts potable Water : 2 parts of ZycoPrime+). Waterproofing Membrane For a waterproofing coating mix 1 part ZycoPrime+ with 1 part of cement & 1 part of 100 mesh sand. Add water for brushability. Brush apply the mix in span of 4-6 hours on the prepared concrete substrate. It is recommended to saturate the surface with ZycoSil+ solution prior to this application. Overlay the coating with a protective screed to the desired slope and thickness. Coverage : 4-5 m for a 0.2 mm (200 microns) coat. Repair Mortar & Renders, Floor Screed & PCC Prepare the Mortar in the following proportion: Cement 50 kg Washed Sand 75 kg 6 mm Down size aggregates 75 kg ZycoPrime+ 6-7.5 litres Water 10 litres For PCC & Plaster work : ZycoPrime+ 100 ml per bag cement (conforms to IS 2645 - 2003). APPLICATION DETAIL :- Sr. No. Application Recipe Zycoprime + Qty. 1 Patching & Repair Mortar Portland Cement : 50 kg Washed Sand : 10 KG Water : 10 ltrs 6 - 7.5 ltrs 2 PCC / Plaster Portland Cement : 50 kg 100 ml 3 Waterproofing membrane (ro

Jain Irrigation Systems Ltd. (JISL) derives its name from the pioneering work it did for the Micro Irrigation Industry in India. However, there is more to Jain Irrigation than Irrigation. Jain Piping Division is the largest producer of thermoplastic piping systems for all conceivable applications with pipes ranging from 3 mm to 1600 mm in diameter and in different pressure ratings.

JISL has a production capacity of over 3, 00, 000 M.T. per annum. JISL is the only manufacturer to own DSIR approved R&D setup with state-of-the-art facilities. The pipes are manufactured confirming to IS, DIN, ISO, ASTM, TEC and other customized specifications. The Piping Division includes PE, PVC Pipes and Fittings catering to the urban and rural infrastructure needs of the country apart from the Irrigation needs of the farmers. Jain CPVC plumbing pipes & Fittings for Hot water application is yet another product that will be a forward integration of the above group of infrastructure products. This will convey the hot water with efficiency combined with economy and have a long life.

Standard and Range

Jain Plumbing CPVC pipes are manufactured to IS 15778, from specially formulated compounds conforming to or exceeding the requirements of CPVC compound of cell classification "D.P.110-2-3-2" as per IS 15225.

Features & Advantages

• Manufactured from high-quality NSF Approved CPVC Compound.
• The compound is tested safe for potable water application.
• Wide range of working temperatures and pressures.
• Low thermal expansion.
• The smooth inner wall, no scale build-up or erosion.
• Long-life – as CPVC does not build scale or corrode.
• Excellent impact strength.
• Light in weight, easy to install.
• Energy-efficient, low insulation cost.
• Ability to withstand water flow noise.
• Excellent fire-resistant characteristics.
• Completely leak-proof jointing.
• Durability and long-term reliability.
• Non-Toxic-Lead free.
• Wide range of pipes and fittings.
• Aesthetically pleasing when exposed in the application.

Jain Irrigation Systems Ltd. (JISL) derives its name from the pioneering work it did for the Micro Irrigation Industry in India. However, there is more to Jain Irrigation than Irrigation. Jain Piping Division is the largest producer of thermoplastic piping systems for all conceivable applications with pipes ranging from 3 mm to 1600 mm in diameter and in different pressure ratings.

JISL has a production capacity of over 3, 00, 000 M.T. per annum. JISL is the only manufacturer to own DSIR approved R&D setup with state-of-the-art facilities. The pipes are manufactured confirming to IS, DIN, ISO, ASTM, TEC and other customized specifications. The Piping Division includes PE, PVC Pipes and Fittings catering to the urban and rural infrastructure needs of the country apart from the Irrigation needs of the farmers. Jain CPVC plumbing pipes & Fittings for Hot water application is yet another product that will be a forward integration of the above group of infrastructure products. This will convey the hot water with efficiency combined with economy and have a long life.

Standard and Range

Jain Plumbing CPVC pipes are manufactured to IS 15778, from specially formulated compound conforming to or exceeding the requirements of CPVC compound of cell classification "D.P.110-2-3-2" as per IS 15225.

Features & Advantages

• Manufactured from high-quality NSF Approved CPVC Compound.
• The compound is tested safe for potable water application.
• Wide range of working temperatures and pressures.
• Low thermal expansion.
• Smooth inner wall, no scale build-up or erosion.
• Long life – as CPVC does not build scale or corrode.
• Excellent impact strength.
• Light in weight, easy to install.
• Energy efficient, low insulation cost.
• Ability to withstand water flow noise.
• Excellent fire resistant characteristics.
• Completely leak proof jointing.
• Durability and long term reliability.
• Non-Toxic-Lead free.
• Wide range of pipes and fittings.
• Aesthetically pleasing when exposed in the application.

SILICO READY MIX PLASTER is a polymer-modified premixed cement-based plaster. It is convenient, easy to use, strong and binds better to its substrate. It provides an even surface on which tiling can be done faster & efficiently. READY-MIX PLASTER is specially formulated using graded sand to impart compactness to the plaster. It also contains special polymers which reduce re-bonding losses, thereby increasing the productivity of the labor and has a water-retaining component which reduces the curing requirement of the plaster, when compared to the conventional method.

ADVANTAGES

Consistent quality

• Easy to carry, use and apply
• Fixed mortar ratio
• Minimum rebound losses
• Almost no curing
• Reduced shrinkage cracks
• Time-saving
• Durable, smooth & excellent finish

Ready Mix Plaster

Ready Mix Plaster is cement-based quality material composed of hydraulic binders, high-quality graded sand, and special additives. It is supplied as dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce cohesive mortar, it contains special additives to provide good adhesion and shrinkage control.

Ready Mix Plaster is used for masonry, civil repair, plastering on inner and outer walls.  It can be used on brick, block, stone walls as well as concrete surfaces.

METHOD OF APPLICATION

SURFACE PREPARATION

Surface should be clean, sound and free from loose material, grease, oil paint etc.  Prior to Ready Mix Plaster application, soak the entire surface with clean water.

MIXING

Ready Mix Plasters with 12-13 % water by weight of the material.  Stir for 2-3 min, to have a consistency free of lumps.

APPLICATION

Ready Mix Plaster can be applied by normal masons just like the conventional method.

CURING

In general, no curing is required for Ready Mix Plaster.  However, when the ambient temperature crosses 30 degrees centigrade, it is recommended to do one curing after 24 hours in order to minimize the rapid evaporation of water from applied surface.

PACKAGING & STORAGE

40kgs PP bags. The product should be stored in cool and dry place, and to be used within 6 months from date of manufacturing.

SAFETY

Use of dust mask, safety goggles and gloves are recommended.