Product / Services
Post Buy Requirement
AT

Apmat Trade
MP Nagar, Bhopal, Madhya Pradesh

Add Review
Call Now Call Now

Our Product / Services

  1. Testing Equipment 54 Products available
  2. Measuring Instruments & Equipment 39 Products available
  3. Multimeter 12 Products available
  4. Refractometer 6 Products available
  5. Electrical & Electronic Testing Devices 4 Products available
  6. Wire Accessories 3 Products available

  7. Testing Equipments

    2 Products available

  8. Signs

    1 Products available

  9. Tapes

    1 Products available

  10. Software Development Service

    1 Services available
  11. Others Products / Services 148 Products / Services available

Measuring Instruments & Equipment

We are leaders in the market for providing best range of MOTWANE LR2045S, DIT-500 Temperature meters, MIC-5010 Multifunction electrical installations meter, DIT-130 Temperature meters and MPI-530 Multifunction electrical installations meter

MOTWANE LR2045S

MOTWANE LR2045S
The Motwane LR 2045-S is a 4 digital micro-ohm-meter, capable of measuring low resistance with 1micro-ohm resolution. It employs the proven 4-wire (4W) measurement where fixed DC current is supplied to DUT and voltage drop across the DUT is measured and displayed as proportional resistance reading. The meter is able to deliver guaranteed stable readings on inductive as well as resistive loads.
View Complete Details
Ask Latest Price & Details
DIT-500 Temperature meters

DIT-500 Temperature Meters
Temperature meters operating in the infrared are used to determine the temperature of the surface of the item. The optical system of the device detects the emitted, bounced and sent energy, which is collected and concentrated on the detector. Electronic system translates optical data into temperature value. In order to increase accuracy the laser pointer is built-in the device.
View Complete Details
Ask Latest Price & Details
MIC-5010 Multifunction electrical installations meter

MIC-5010 Multifunction Electrical Installations Meter
Insulation resistance measurement:- measurement voltage any in the range of 501000 V at 10 V and 1000.5000 V at 25 V resolution, - continuous indication of measured insulation resistance or leakage current, - automatic discharge of measured object capacitive voltage after the end of insulation resistance measurement, - acoustic signaling of 5 seconds intervals to facilitate capturing time characteristics, - metered T1 , T2 and T3 test times for measuring one or two absorption coefficients from the range of 1600 s, - adjustable measuring time to 99'59', - polarization index (PI) and dielectric absorption ratio (DAR) measurement, - indication of actual test voltage during measurement, - 1.2 mA and 3 mA test current, - step voltage insulation resistance measurement (SV), - Dielectric Discharge calculation (DD), - protection against measuring live objects, - measurements with test leads up to 20 mDigital filters function for measurements in high noise enviroment (10 s, 30 s , 60 s).Continuity measurement of protective connections and equipotential bonding in accordance with EN 61557-4 with current > 200 mA.
View Complete Details
Ask Latest Price & Details
DIT-130 Temperature meters

DIT-130 Temperature Meters
Temperature meters operating in the infrared are used to determine the temperature of the surface of the item. The optical system of the device detects the emitted, bounced and sent energy, which is collected and concentrated on the detector. Electronic system translates optical data into temperature value. In order to increase accuracy the laser pointer is built-in the device.
View Complete Details
Ask Latest Price & Details
MPI-530 Multifunction electrical installations meter

MPI-530 Multifunction Electrical Installations Meter
MPI-530 meter is a multi-functional instrument for electric shock protection measurements including the option of various methods for measuring earthing and earthing resistance. Additionally the meter enables its user to analyse power supply parameters, records and displays them on its screen. The instrument automatically measures the insulation resistance in a socket and in 3 -, 4 - and 5-wire cables when used with AutoISO-1000C adapter. Measurement results may be continuously verified, depending on users demand or according to binding regulations. Memory of the instrument may store tens of thousands of measurements allowing users to store them in a structure of a protocol and describe individual measurement points.
View Complete Details
Ask Latest Price & Details
MPI-525 Multifunction electrical installations meter

MPI-525 Multifunction Electrical Installations Meter
impedance measurement with 23 A current (44 A phase-to-phase) - short-circuit resistor R=10, measurement range: 95.440 V, frequency 45.65 Hz, Short-circuit loop measurement with resolution 0, 01, in distribution network without tiggering RCD (In30 mA): automatic calculation of short-circuit, detection of phase voltage and phase-to-phase voltage, additional UNI-Schuko plug for automatic measurement, AGT adapter for 3 phase network measurement. Testing of general and selective RCD with the rated differential current of 10, 30, 100, 300, 500 and 1000 mA. (Type AC, A and B).
View Complete Details
Ask Latest Price & Details
MPI-520 Multifunction electrical installations meter

MPI-520 Multifunction Electrical Installations Meter
The MPI-520 multifunction meter is dedicated to perform diagnosis of electrical installation according to IEC 61557 standards. Digital meter MPI-520 is designed to measure impedance of a short cicuit loop also without triggering RCD, parameters of RCD, insulation resistance, earthing resistance, continuity and also for phase sequence testing. Furthermore to measure and logging of AC voltage and current, frequency and power.
View Complete Details
Ask Latest Price & Details
MRU-200 earth resistance meter

MRU-200 Earth Resistance Meter
earth resistance measurment with 2-pole, 3-pole, 4-pole method, impulse earth impedance measurement, two kinds of measuring impulse 410s, 10350s, earth resistance measurement without disconnecting measured earths (using clamp), two clamps earth resistance measurement without auxiliary test probs, earth resistivity measurement, continuity measurement, leakage current measurement.
View Complete Details
Ask Latest Price & Details
MOTWANE XWRM 10 A Transformer Winding Resistance Meter

MOTWANE XWRM 10 A Transformer Winding Resistance Meter
This is 4 digit Transformer Winding Resistance Meter which is specially designed for cold and hot winding resistance measurement of transformer winding on heavily inductive load. This meter is a dual channel winding resistance meter specially designed to carry out winding resistance measurement of highly inductive transformer windings. This meter is intended to replace complex bridge set up with a single compact instrument. The instrument is based on four wire measurement method to eliminate error of test leads resistance on measurement. It is well protected against inductive kickback offered by transformer winding. The transformer winding is automatically discharged after each test for operators safety. The heavy duty crocodile clips provided with XMRM-10 are industrial grade rugged clips specially designed for durable performance in harsh industrial conditions. This meter has custom built backlit LCD with soft touch membrane keypad, data exchange to PCB through USB interface & built in memory storage.
View Complete Details
Ask Latest Price & Details
Transformer Ratio Meters / TRM-101

Transformer Ratio Meters / TRM-101
Transformer Ratio Meters TRM-101 Fully automatic micro-controller operatedMeasure 3ph transformer connection group to IEC 76.Identify group to IEC 76Measure ratio 10, 000: 1 to IEC 76Measure PTCT ratio to IEC 60044Measure excitation currentPolarity mark check for 1 ph to IEC 60044Calculate ratio error to PRESET standard ratio8 G memory: saves up to 10, 000 groups
View Complete Details
Ask Latest Price & Details
Transformer Ratio Meters / TRM-11

Transformer Ratio Meters / TRM-11
  • Accuracy 0.2 class
  • Weight <10 kg.
  • Measurement ratio 1:10000
  • Display LCD
Fully automatic: No manual balancingAutomatic measure transformer groupAutomatic calculation of ratio errorRS 232 interfaceBuilt in printer
View Complete Details
Ask Latest Price & Details
MOTWANE PCRM-100S Contact Resistance Meter

MOTWANE PCRM-100S Contact Resistance Meter
The Motwane make Contact Resistance Meter (Model: PCRM-100S) is a digital micro ohm meter, specially designed to measure extremely low resistances in micro ohm. It is having minimum measuring range of 200 Ohm with resolution of 0.1 Ohm. The DC Current injection is fixed at 100A. Test information like current injected with measured resistance & voltage drop in mV is displayed with real time data on large LCD with backlit. Advanced Windows based software is provided for data downloading, analysis and report generation. Internal memory of 99 records is provided for onsite data storage. Thermal printer is the additional feature provided to print the test results. PCRM-100S is specially used to measure static contact resistance of HT circuit breaker contacts, installed in live energised switchyards. High accuracy with Repeatability makes it a reliable tool for Quality Assurance. Typical resistance measurement applications are: Circuit Breaker contact resistance Isolator contacts Bus bar joints Weld joints.
View Complete Details
Ask Latest Price & Details
MRU-21 earth resistance meter

MRU-21 Earth Resistance Meter
earth resistance measurment with 3-pole method, measurement of continuity of equipotential bondings and protective conductors with auto-zero function - with current 200 mA, resistance measurement using 2-pole method
View Complete Details
Ask Latest Price & Details
MRU-120 Earth Resistance Meter

MRU-120 Earth Resistance Meter
earth resistance measurment with 3-pole, 4-pole method, earth resistance measurement without disconnecting measured earths (using clamp), continuity of equipotential bondings and protecting conductorstwo clamps earth resistance measurement without auxiliary test probs, earth resistivity measurement,
View Complete Details
Ask Latest Price & Details
MIC-10 Digital insulation meter

MIC-10 Digital Insulation Meter
nsulation resistance measurement:- selected test voltage: 50, 100, 250, 500, 1000 V, - continuous indication of insulation resistance or leakage current, - automatic discharge of capacitance of tested object after the insulation resistance measurement, - acoustic signalling of five-second periods to facilitate obtaining time characteristics, - indication of actual test voltage during the measurement, - protection against measuring live objects, - three-lead measurement.Continuity measurement of protective and equipotential conductors according to EN 61557 - 4 with the >200 mA currentLow-voltage circuit continuity and resistance measurement:- circuit resistance measurement (
View Complete Details
Ask Latest Price & Details
MOTWANE LR2065 Ohm Meter

MOTWANE LR2065 Ohm Meter
412 digit LED display. Resolution 0.1 micro-ohm on 2 milli-ohm range.Mains cum Battery operated. True 4-wire resistance measuring technique eliminates lead resistance errors inherent in 2 wire systems. Pulse mode operation
View Complete Details
Ask Latest Price & Details
MOTWANE LR 201 Safety Ohm Meters

MOTWANE LR 201 Safety Ohm Meters
312 Digit LCD Display. Resolution 1 m ohm on 2 ohm range. Battery operated.Ratiometric Measurements. Gold plated terminals for low thermal effect. Fully protected against reversal of battery polarity and over loads. 'PUSH TO READ' Switch for additional safety.
View Complete Details
Ask Latest Price & Details
MOTWANE DCM 30A AC Clamp Meter

MOTWANE DCM 30A AC Clamp Meter
  • MOTWANE DCM 30A AC Clamp Meter Overload protection on all ranges , Range 1000Amp AC
This is an economy range general purpose 3 digit AC Clamp meter with back lit LCD display. The jaw opening is 50mm approx. & can measure AC current through the clamp upto 1000A. It also measures DC Voltage -1000V, AC Voltage-700V, and Resistance upto 2 M?, Frequency -20 MHz with continuity & diode measurements. This meter also has a Max button which is used for Inrush Current measurement & meter is powered by 9V Battery.
View Complete Details
Ask Latest Price & Details
MOTWANE DCM 49A Clamp Meter

MOTWANE DCM 49A Clamp Meter
  • MOTWANE DCM 49A Clamp Meter Large Jaw Size: 60mm. , Auto Power Off for battery life saving
This is a general purpose 3 digit AC DC Clamp meter with backlit LCD display. The jaw opening is 60mm approx. & can measure AC DC current through the clamp upto 1000A.It also measures DC Voltage-1000V, AC Voltage-700V, Resistance upto 40 M?, Frequency-20MHz with duty cycle, continuity & diode measurements. This meter also has Capacitance range upto 100 ?F & is powered by one 9V battery.
View Complete Details
Ask Latest Price & Details
MOTWANE DCM 39A Clamp Meter

MOTWANE DCM 39A Clamp Meter
  • MOTWANE DCM 39A Clamp Meter Current Measurement upto 1000A , » 2 in 1 Clamp meter + Digital Multimeter
Auto ranging 3 digit (3999) LCD-Display. Current Measurement upto 1000A. True RMS reading for ACV & ACA. 2 in 1 Clamp meter + Digital Multimeter. Overload protection for all ranges. Data Hold, Relative Key, Facility. Water resistance front panel, fireproof heavy-duty ABS casing. Current Sensor - Hall effect Sensor. Over range Indication: 'OL' or '-1' is displayed.
View Complete Details
Ask Latest Price & Details
MOTWANE DCM 9930A Clamp Meter

MOTWANE DCM 9930A Clamp Meter
  • MOTWANE DCM 9930A Clamp Meter Current Measurement upto 2000A , 2 in 1 Clamp meter + Digital Multimeter
Auto ranging 3 digit LCD-Display. Current Measurement upto 2000A. True RMS reading for ACV & ACA. 2 in 1 Clamp meter + Digital Multimeter. Overload protection for all ranges. Data Hold, Relative Key, Facility. Water resistance front panel, fireproof heavy-duty ABS casing. Current Sensor - Hall effect Sensor. Over range Indication: 'OL' or '-1' is displayed.
View Complete Details
Ask Latest Price & Details
MOTWANE DCM 10A Clamp Meter

MOTWANE DCM 10A Clamp Meter
  • MOTWANE DCM 10A Clamp Meter 300A range for standard current measurements , True RMS reading for ACV & ACA
0.01mA resolution for measuring earth leakage currents.300A range for standard current measurements.Analogue Bargraph Display for trending.Handguard designed for operator safety.Pocket sized and lightweight.Jaw size 40mm.
View Complete Details
Ask Latest Price & Details
MOTWANE DCM 600 Clamp Meter

MOTWANE DCM 600 Clamp Meter
  • MOTWANE DCM 600 Clamp Meter 300A range for standard current measurements , True RMS reading for ACV & ACA
3 digit LCD display. Wide Application for Process control and automotive services. World's first ACDC leakage clamp tester with 0.1mA resolution. Least influenced from external magnetic field and noise with double shielding CT. Memory function for maximum and minimum value. Dual integration mode with TRUE RMS reading.
View Complete Details
Ask Latest Price & Details
MOTWANE LR2045

MOTWANE LR2045
Pulse mode operation, for protecting heat sensitive devicesData Logging possible with RS232 interface Soft touch keys for smoother operation Cheap & portable412 digit LED display. Resolution 0.1 micro-ohm on 2 milli-ohm range. RS 232 PC Interface. True 4-wire resistance measuring technique eliminates lead resistance errors inherent in 2 wire systems. Pulse mode operation.
View Complete Details
Ask Latest Price & Details
MOTWANE CRM 100A Contact Resistance Meter

MOTWANE CRM 100A Contact Resistance Meter
This is 3 digit Contact Resistance Meter which is a digital micro ohm meter designed for measuring resistances in three ranges viz. 200Ohm - 2mOhm - 20mOhm with resolution of 0.1Ohm in 200 Ohm range. This meter can apply DC current, selectable range from 10A, 20A, 50A & 100A to the resistance to be tested. The Resistance reading is displayed directly in micro ohm or milli ohm. This meter is intended to replace complex bridge set up with a single compact instrument. It is based on four wire measurement technique to eliminate the lead resistance error. This meter has custom built backlit LCD with soft touch membrane keypad, data exchange to PCB through USB interface & built in memory storage upto 99 test results.
View Complete Details
Ask Latest Price & Details
MIC-5050 Multifunction electrical installations meter

MIC-5050 Multifunction Electrical Installations Meter
M63 is specially designed industrial grade Trms digital multimeter in our research laboratory & manufactured under stringent manufacturing process for wide range of applications like Power generation, Power distribution, Power transmission, Steel Industries, Cement Industries, Mining Industries, Power Electronics Industries, Heavy Engineering Industries, and Defense Sector & Aviation Sector. M63 is a high performance multimeter with high safety, linearity and reliability. Excellent noise immunity to disturbances from energized power lines, with CAT IV & IP-54 protection.
View Complete Details
Ask Latest Price & Details
DCM300E Earth Leakage Clampmeter

DCM300E Earth Leakage Clampmeter
  • Earth Leakage Clampmeter 0, 01 mA resolution , EMC & EN61010-1 compliant
The DCM300E is designed mainly to check earth leakage currents. However, the upper range will measure currents of up to 300 A a.c. making it a totally versatile instrument capable of taking most current measurements. The instrument has four ranges; 30 mA, 300 mA, 30 A and 300 A with a minimum resolution of 0, 01 mA on the 30 mA range. For those hard to read measurements, where there are problems of accessibility or poor lighting, a data hold feature has been incorporated, to aid measurement.
View Complete Details
Ask Latest Price & Details
DCM320 clamp meters

DCM320 Clamp Meters
  • Digital clamp meter 600 V ac/dc (DCM320), Data Hold
The DCM310 and DCM320 are ideal clamp meters for use during the installation, maintenance and checking of electrical systems and equipment. Both meters will measure AC current (5060 Hz) up to 400 A, with a Data-hold feature to freeze the displayed value for use in confined situations where the display may be difficult to read. The DCM310 also has a max-hold feature to automatically store and display the maximum value measured over a period of time. The DCM320 has the benefit of measurement ranges for a.c. and d.c. voltages up to 600 V, and resistance up to 20 M, via the terminals and supplied test leads. It also has a continuity buzzer that operates up to 20 .
View Complete Details
Ask Latest Price & Details
DCM340 clamp meters

DCM340 Clamp Meters
  • Digital clampmeter CAT III 1000V and CAT IV 600 V , 600 A and 600 V
The DCM340 is a highly versatile instrument and ideal for use in the installation, maintenance, monitoring or checking of a.c. or d.c. electrical systems and equipment. There are four instruments in the family of high quality DCM300 series clamp meters from Megger, including the 400 A a.c. current-only DCM310; the DCM320 which includes voltage and resistance measurement; the DCM330 Fork- Multimeter, which is an open fixed-jaw design; and this, the DCM340. Capable of measuring a.c. and d.c. current up to 600 A; a.c. and d.c. voltage up to 600 V; resistance up to 400 ; and frequency up to 400 Hz, the DCM340 is the most versatile in the range.
View Complete Details
Ask Latest Price & Details
MMC850 current clamp meters

MMC850 Current Clamp Meters
  • Multi-core AC digital clamp meter Flat or round section cables , No need to split wires
The NEW Megger MMC850 offers a unique solution to current measurement in multi-core cables, without the need to split cores. Simply clamp the MMC850 to a multicore cable and read the current flowing. Conventional current clamp meters have been available for many years and are an accepted method of non-intrusive current measurement. However these instruments can only measure current in a single core cable, requiring multi-core cables to be split before a core can be measured. Unlike conventional clamp meters, the MMC850 has a complex array of Planer magnetic sensor coils to calculate the current flowing in the conductors of multicore cables with either 2 or 3 cores, and in either flat or round section cable, up to 100 A. The convenience and potential time saving from using the multi-core clamp is considerable.
View Complete Details
Ask Latest Price & Details
AVO 300 Megger digital multi-meters

AVO 300 Megger Digital Multi-meters
  • Type Digital Multi Meter
  • Weight 100-200gm, 200-300gm
  • Color Grey, White
  • Voltage 3-6VDC, 6-9VDC
  • Application Indsustrial Usage
  • Display Type Digital
  • Frequency 50Hz-65Hz
  • Automatic Grade Automatic, Fully Automatic
  • Power Source Battery, Electric
  • Feature Accuracy, Light Weight
  • Warranty 1Year
  • Digial Multimeter Designed for Electricians , Fully auto ranging
We are the leading manufacturers, exporters and supplier of this products.
View Complete Details
Ask Latest Price & Details
MRU-20 earth resistance meter

MRU-20 Earth Resistance Meter
earth resistance measurment with 3-pole method, measurement of continuity of equipotential bondings and protective conductors with auto-zero function - with current 200 mA, resistance measurement using 2-pole method. Additionally: AUTO-OFF function after 5 minutes, indication of battery state.
View Complete Details
Ask Latest Price & Details
MRU-105/106 earth resistance meter

MRU-105/106 Earth Resistance Meter
The MRU-105 and MRU-106 (for 60 Hz) are portable meters for the earth resistance and earth resistivity measurement (Wenners method). The instruments can measure resistance using 2, 3, or 4 poles method. Measurements can be simplified using current clamps. The very high immunity for existing interference voltage AC + DC at which measurement is still performed: 24 V (68 V-p-p) but also measurement of existing interference voltage up to 40 V is unique functionality of the meters. Moreover meters measure the resistance of the probes and calculate automatically the error coming from probe's resistances. The meters MRU-105 and MRU-106 (for 60 Hz) additionaly can be powered from Ni-MH batteries or standard C size, and the test results can be stored in the internal memory and transmited to PC via USB - cable
View Complete Details
Ask Latest Price & Details
MIC-30 Digital insulation meter

MIC-30 Digital Insulation Meter
selected test voltage: any voltage in the 50.1000 V range with 10 V step, automatic measurement in sockets with the UNI-Schuko adapter with possibility of configuring pairs of measured cables, continuous indication of insulation resistance or leakage current, automatic discharge of capacitance of tested object after the insulation resistance measurement, acoustic signalling of five-second periods to facilitate obtaining time characteristics, measured test times T1, T2 i T3 to measure one or two absorption coefficients in the 1. 600 sec. range, indication of actual test voltage during the measurement, protection against measuring live objects, three-lead measurement. Continuity measurement of protective and equipotential conductors according to EN 61557 - 4 with the >200 mA current Low-voltage circuit continuity and resistance measurement: circuit resistance measurement (
View Complete Details
Ask Latest Price & Details
LXP-1 Digital light meter

LXP-1 Digital Light Meter
The digital light meter is a precision instrument used to measure illuminance (Lux, footcandle) in the field. It is meet CIE photopic spectral response. It is fully cosine corrected for the angular incidence of light. The illuminance meter is compact, tough and easy to handle owing to its construction. The light sensitive component used in the meter is a very stable, long-life silicon photo diode and spectral response filter.
View Complete Details
Ask Latest Price & Details
MIC-2 Digital insulation meter

MIC-2 Digital Insulation Meter
Digital insulation meter MIC-2 automatically select insulation measurements range at 250 and 500 V test voltages. This insulation meter is suited for insulation resistance measurements of electric installations, motors and other electric devices. MIC-2 can also be used to measure voltage up to 600 V AC and resistance up to 1999. Instrument is easy to use, professional tool in small and incredibly ergonomic case.
View Complete Details
Ask Latest Price & Details
P-2 voltage Meter

P-2 Voltage Meter
ACDC voltage measurement and indicationResistance measurement and circuit continuity testingIndication of phase rotationSingle pole testing for phase detectionRCD testing
View Complete Details
Ask Latest Price & Details
P-3 voltage Meter

P-3 Voltage Meter
ACDC voltage measurement and indicationResistance measurement and circuit continuity testingIndication of phase rotationSingle pole testing for phase detectionRCD testingIdentification and adjustment of phase
View Complete Details
Ask Latest Price & Details
MIC-5000 Multifunction electrical installations meter

MIC-5000 Multifunction Electrical Installations Meter
Digital insulation resistance meter MIC-5000 is intended for direct measurements of insulation resistance in power cables, transformers, electric motors and other power devices and equipment. Additionally, the device enables measurement of DC and AC voltages as well as low voltage measurement of low resistances. All test terminals of the instrument are fitted with a circuitry protecting the device from damage should the mains voltage appear on the input. The instrument was designed and built in compliance with EN IEC 61557 standard.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.