• Movement on the table are indexed fully 360 degree in the Horizontal plane 90 degree in the Vertical. So that any combination of angles may be obtained "T" Slots in the table are machined from the solid and a hole is bored centrally and fitted with a steel Sleeves for receiving Spigots. The table swivel on a ground steel spigot and can be locked in any position by steel clamp shown.
• Code 704R: With Rectangular Table

704 : Compound Angle Table (Round Table), (Size : 9")

Tilting Table

( Size : 5x7", 7x10", 10x15" )

• Special design for angle setting on various machine tools.
• Low profile for larger working space.
• The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts.
• Can be adjusted by 45 degree on both right-hand and left- hand side.
• The angle marking are accurate and easy to read.

• Useful accessory for setting work at an angle for milling or other operations.

• Cast Iron Stress Relieved Tilting Table.

• Special design for angle setting on various machine tools.
• Low profile for larger working space.
• The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts.
• Can be adjusted by 45 on both right-hand and left- hand side.
• The angle marking are accurate and easy to read.

• Useful accessory for setting work at an angle for milling or other operations.

• Cast Iron Stress Relieved Tilting Table.
• The unique design on Connecting Plate and 360 Graduated Swivel Base, making it possible for the Angle Plate to do rotation at any angles.

• These Tilting Angle Tables are available in a range of sizes. They are designed primarily of simple, quick angle adjustment and angle setting on Drilling and Milling Machines.

• High accuracy, easy reading of all dias clear & functional of all operating elements, sturdy yet good looking practical design. These are widely used for circular cutting, angle cutting, boring and spot facing with a milling machine.
• Works as an index center in the vertical position, as well as conventional Rotary Table, graduated 360
• Provision for fine adjustments when settings work piece.
• Efficient lock provided.
• Worm drive disengagement is quick and precise. An eccentric sleeve with thrust Bearing races encases the worm shaft.
• End play in worm shaft is adjustable.

• APEX ROTARY TABLES have a sturdy design to suit many achining operations on Milling Machines including circular cutting, setting angles and indexing. They are available in a range of sizes to suit various machines and machining applications.

• The table and base is manufactured from close grain shock resisting Cast Iron dully stress relieved
• Worm & center table bush made of selected steel.

• Direct reading to 2 minute for size 6", 8" and 10" on handwheel scale.
• Direct reading to 1 minute for size 12", 15", 18" and 20" onhand wheel scale.
• ACCURACY:- Maximum error 4 minutes of circulardivision using hand wheels.
• Table flat to within 0.01 mm / 100 mm.
• Working surface rotates in its own plane to within 0.030mm.
• Horizontal and Vertical supporting surface square with0.01mm/100 mm.
• Centre bush bore is true to table axis within 0.03 mm.
• Maximum parallelism error through 360 rotation of tableis .025 mm .
• The Base is provided with two bolt slots in
• 715E : Both horizontal slots in & Vertical mounting on machine table.

• Movement on the table are indexed fully 360 degree in the Horizontal plane 90 degree in the Vertical. So that any combination of angles may be obtained "T" Slots in the table are machined from the solid and a hole is bored centrally and fitted with a steel Sleeves for receiving Spigots. The table swivel on a ground steel spigot and can be locked in any position by steel clamp shown.
• Code 704R: With Rectangular Table

704 : Compound Angle Table (Round Table), (Size : 9")

Tilting Table

( Size : 5x7", 7x10", 10x15" )

• Special design for angle setting on various machine tools.
• Low profile for larger working space.
• The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts.
• Can be adjusted by 45 degree on both right-hand and left- hand side.
• The angle marking are accurate and easy to read.

• Useful accessory for setting work at an angle for milling or other operations.

• Cast Iron Stress Relieved Tilting Table.

• Special design for angle setting on various machine tools.
• Low profile for larger working space.
• The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts.
• Can be adjusted by 45 on both right-hand and left- hand side.
• The angle marking are accurate and easy to read.

• Useful accessory for setting work at an angle for milling or other operations.

• Cast Iron Stress Relieved Tilting Table.
• The unique design on Connecting Plate and 360 Graduated Swivel Base, making it possible for the Angle Plate to do rotation at any angles.

• These Tilting Angle Tables are available in a range of sizes. They are designed primarily of simple, quick angle adjustment and angle setting on Drilling and Milling Machines.

• High accuracy, easy reading of all dias clear & functional of all operating elements, sturdy yet good looking practical design. These are widely used for circular cutting, angle cutting, boring and spot facing with a milling machine.
• Works as an index center in the vertical position, as well as conventional Rotary Table, graduated 360
• Provision for fine adjustments when settings work piece.
• Efficient lock provided.
• Worm drive disengagement is quick and precise. An eccentric sleeve with thrust Bearing races encases the worm shaft.
• End play in worm shaft is adjustable.

• APEX ROTARY TABLES have a sturdy design to suit many achining operations on Milling Machines including circular cutting, setting angles and indexing. They are available in a range of sizes to suit various machines and machining applications.

• The table and base is manufactured from close grain shock resisting Cast Iron dully stress relieved
• Worm & center table bush made of selected steel.

• Direct reading to 2 minute for size 6", 8" and 10" on handwheel scale.
• Direct reading to 1 minute for size 12", 15", 18" and 20" onhand wheel scale.
• ACCURACY:- Maximum error 4 minutes of circulardivision using hand wheels.
• Table flat to within 0.01 mm / 100 mm.
• Working surface rotates in its own plane to within 0.030mm.
• Horizontal and Vertical supporting surface square with0.01mm/100 mm.
• Centre bush bore is true to table axis within 0.03 mm.
• Maximum parallelism error through 360 rotation of tableis .025 mm .
• The Base is provided with two bolt slots in
• 715E : Both horizontal slots in & Vertical mounting on machine table.