Our Products
Testing Equipments
2 Products availablePipe Fittings
2 Products availableMeasuring Instruments & Equipment
2 Products availableNuts Bolts And Fasteners
2 Products availableFlanges
2 Products availableIndustrial & Engineering Products
1 Products availablePlumbing & Pipe Fittings
1 Products availableWe are leaders in the market for providing best range of gauge snubbers, CLOSED END TUBES, STRAIN RELIEF SPRINGS, Air Compression Fittings and SPRING LOAD FITTING
The range of Gauge Cocks offered by us is used to isolate the pressure gauge from the pressure media to enable inspection of the same where the pressure is continuously pulsating. This array of products is suitable for various pressure applications till 30 kg/cm2. Also used in petroleum industries, steam boilers, steam taps and chemical process industries, our products need low maintenance.
Our large line of consignments includes Thermowellswhich is manufactured with superior raw material and latest technology. This range of products is used to protect temperature sensors. Also, used to monitor industrial processes while permitting correct measurement, our products are checked before the final delivery to the customers. This product protect the instrument from the pressure, flow-induced forces and chemical effects. Our Thermowells are known for dimensional accuracy and easy installation.
We are one of the leading manufacturers, suppliers and exporters ofIndustrial Thermowell.This product comprisestube closed at one end and it is mounted in the process stream. Basically being a thermometer, our products are inserted in the open end of the tube. Our team procure quality-approved raw material and latest production process to manufacture the Thermowell.
Three temperature-dependent factors influence ordering thermowells:
We have been servicing a broad cross-section of industries over the years and have developed expertise in manufacturing Thermowells to ensure best quality, delivery and service for our customers.
Material | SS316/SS304/Brass/Monel/Inconel/ Hastealloy / CS/ Cupronickel / F11 / F22 and Other Alloys |
Sizes | Bar Stock upto 1 m / Fabricated upto 3 m |
End Connection | BSP/BSPT/NPT/UNF/NF/NPSM/SW |
Process Connection | Flanged / Threaded as per customer’s requirement |
Design | Straight Shank / Stepped Shank / Tapered Shank / Limited Space / Sanitary Type |
Leveraging on our years of experience we offer a range ofMale Connectors. This array of products is used to connect a threaded female connection with a Tube. Available in various specifications, our products are manufactured with factory-tested raw material and latest technology. We also check the connectors on the basis of various parameters.
Specifications:
The array ofFemale Connectorsoffered by us is manufactured using superior raw material and latest technology. Our products are used to to connect a threaded male connection with a Tube. We procure standard raw material to manufacture the range of connectors. Therefore, our products are widely applauded for having features like easy installation, long functional life and minimum maintenance.
Specifications:
We are one of the most reliable manufacturers, suppliers and exporters ofDouble Ferrule Union.Use to connect two pipes together, our products are manufactured using superior metals like stainless steel and brass. We have hired some of the expert quality controllers who monitor the production process of the consignments. Therefore, our products are known for durability and minimum maintenance.
Specifications & features:
We are engaged in offering a range ofBall Valves.These are basically a spherical disc. Our valves control the flow and featured with a hole. Our products are used in various shutoff applications. Supporting the pressure up to 1000, our valves are easy to operate and repair. The various parts of our valves are single body, three piece body, split body, top entry and welded.
Specifications:
Our products line includes a range of Porous Snubbers which is featured with a fixed mesh disk. This disk is made of porous metal which protects the gauge. Manufactured using superior raw material, our products are widely appreciated for dimensional accuracy, durability, long functional life, excellent tensile strength and corrosion resistance.
We are applauded for offering defect-free range ofIndustrial Flanges.Our team manufacture this range of consignments with strict adherence to ANSI and DIN standards. We use superior raw material and latest technology to manufacture the flanges. The whole production process is done under the strict vigilance of our quality controllers.
Counting on our many years of experience we offer a defect-free range ofBayonet Adapter.This array of products is manufactured using advanced technology and premium raw material. The adapters are checked on the basis of various internationally recommended parameters. We also make sure that the products are manufactured complying to the set industrial norms and standard.
We are providing an array ofClosed End Tubeswhich is used inresistance temperature detector industries. This range of tubes is manufactured using superior raw material and ultra-modern technology. We are also supported by a team of quality controllers which strictly check the products on the basis of various well-defined parameters. Therefore, our consignments are appreciated for longer functional life, durability and compact design.
We are one of the widely appreciated organization engaged in offering a range ofStrain Relief Springs.Basically, coiled springs, these products connect wire against sharp bends at the transition area. We use superior raw material in the manufacturing process of the products which assure a longer functional life to the products.
We are one of the customer centric organization involved in manufacturing, supplying, exporting and distributing an array ofMeat Probes.This range of products basically ameat thermometer which is used to measure the internal temperature of meat. Basically used to test the roasts, steaks and other cooked foods our products are manufactured using superior raw material which are procured from noted vendor base of the industry. These products are available in various designs and other related specifications.
Features are mentioned below:
We are offering a range ofAir Headerswhich replace several unit valve assemblies. Our products are very suitable for using with a variety of outlet take-off valves.The inlet-connection of the product can be flange- or screwable. Our products are supplied with a bracket and U clamp for wall mounting.
Specifications:
We are widely praised for offeringGauge Saverwhich is also known as over pressure protectors. The products are applicable where the line pressure increased the maximum pressure rating. The products also protect gauge from any damage. We procure factory-tested raw material to manufacture this range of consignments.
The range ofNipples & Special Fittingsoffered by us is available in various configurations. We obtain superior raw material in the manufacturing process of the fittings. The stringent check done by us helps to deliver an array of defect-free fittings to our highly respected customers.
With the support of our state-of-the-art infrastructure we offer a range ofSheet Metal Components.We procure only superior raw material to manufacture the components. The quality controllers of our organization also check the whole process of fabrication to maintain consistent standard. We also pack the components with standard material for a safe transit.
Features are mentioned below:
With the assistance of our hardworking team we manufacture, supply, export and distribute a range ofPrecision Turned Components.We have installed CNC Turning Machines to make the components. Our team source superior raw material to make the products with strict adherence to the set international norms and standard. The components are also available in various customized specifications.
Features are mentioned below:
Our large products range includesCondensate Pots.This array of products is available in carbon steel to ASTM A106, stainless steel to ASTM A312 Piping code and P22. The products are featured with electro polish finish. The products are widely used a used as barrier between the main line and the secondary instruments in the measurement of steam. Installed in the lines fluids, our products are manufactured using superior raw material and latest technology
We are the most prominent organizations involved in manufacturing, supplying, distributing and exporting a range ofBleed Rings.This range of products is featured with radial pipe connections which are designed to fit between standard flanges within the bolt circle. In this process conventional gasket material is used. This product is a simple spacer which allows for drainage.
Spring loaded fittings are used to install sensors in a Thermowell without the use of a connection headand without worrying if the sensoris over inserted or under inserted into the THermowell bore .