Apala Minechem

MI Road, Jaipur, Rajasthan

Our Acidic Ramming Mass is extensively used in the lining of induction furnaces. Our company is an eminent Manufacturer, Supplier and Exporter of Acidic Ramming Mass from Jaipur, India. The Acidic Ramming Mass is characterized by thermal stability and corrosion resistance because it contains less binders, fire clay and moisture compared to plastic refractory. In addition to this, proper check is exercised on magnetic process to ensure iron free material and to assure proper composition of granules according to furnace capacity.

Chemical Composition :

• Silica (Sio₂) : 99%
• Alumina (Al₂0₃) : 0.04%
• Ferric oxide (Fe₂03) : 0.04%
• Potassium oxide (K₂0) : nill

We are a leading manufacturer and exporter of Premix Silica Ramming Mass which contains  Boric Acid mixed with Pre-heated Ramming Mass. We recommend using our Ramming Mass (Premix), which will prove to be a good performer with its long lining life reducing cost of production. Our Silica Ramming Mass is a product of super snow white silica crystalline quartz having silica around 99% and manufactured under strict quality control. It is suitable with high temperature up to 1750^oc. Proper check is exercised on magnetic process to assure iron free acidic ramming mass. Mixing of various quartz grains sizes in the exact proportion suitable for small, medium and large sizes of induction furnaces.

Chemical Composition :

• Silica (SiO₂) : 99% approx
• Alumina (Al₂O₃) : 0.04%
• Ferric oxide (Fe2_O3) : 0.04%
• Potassium oxide (K₂O) : nill

Premix Quartz Ramming Mass is used in induction furnaces as lining material. We are distinguished Manufacturer, Supplier and Exporter of Premix Quartz Ramming Mass from Jaipur, India. The mesh size of our Premix Quartz Ramming Mass is 0 to 5 mm. The Premix Quartz Ramming Mass is manufactured using excellent quality chemical compounds in our own laboratories. Owing to our reliable sourcing network, we are capable of delivering bulk orders of the Quartz Ramming Mass.

Chemical Composition :

• SiO₂ : 99 to 99.5 %

• Fe₂O₃ : 0.02 %

• Boric Powder : 1.2 %

Physical Properties :

• Hardness : 7 Moh

• Melting point : 1700^oC

• Specific Gravity : 2.6-2.7

Buy immaculate quality Premix Acidic Ramming Mass at competitive rates from us. Our company is a successful Manufacturer, Supplier and Exporter of Premix Acidic Ramming Mass from Jaipur, India. Chemical composition and of the entire range is tested in the in house laboratory. The chemical compounds are preheated before mixing process, to eliminate all the moisture content. Our Premix Acidic Ramming Mass is manufactured in conformity with international quality standards.

Factor Affecting lining life of Ramming Mass :

• Quality of Ramming mass
• Carbon Percentage
• Homogeneous mixing of Boric Acid
• Quality of the melting Material
• Effective Ramming Operation
• Good Sintering
• Tapping Temperature
• Storage Condition of RM

Factor Responsible for Quality of Premix Ramming Mass :

• Quality of Basic Raw Material (Quartz/Quartzite)
• Quality of Boric Acid Powder
• Composition of Various grain size
• Moisture content in the material
• Foreign particles generated during Grinding process
• Quality of Mixing (Homogeneous mixing of Boric acid & Various grain size)

• Quality of Packing

Why Apala Premix Ramming Mass is Better?

• Chemical Composition of each & every lot of raw material is tested in the in house laboratory
• Consistency of source of Raw material
• Boric acid is procured from Supplier of Inter nation repute
• Quartz/Quartzite lumps are properly washed before use just to unleash it from impurities
• Manufacturing process includes passing of grinded grains through most effective double drum magnets Magnet plates, Magnet rods & Magnet hoppers made of very powerful rare earth magnets (10000 to 15000 gauges power) to eliminate foreign iron particles generated during grinding process
• The material is preheated before mixing process, to take care of moisture content if any
• The Manufacturing is carried out by skilled workers in strict supervision of technically sound & highly experienced persons.

We are specialized manufacturer of Premix Ramming Mass which contains binder-Boric Acid, mixed with Pre-heated Ramming Mass (no need to mix Boric Acid further). We recommend using our Ramming Mass (Premix), which will prove to be a good performer with its long lining life reducing cost of production.Our Ramming Mass is a product of super snow white silica crystalline quartz having silica above 99% and manufactured under strict quality control .Proper check is exercised on magnetic process to assure iron free acidic ramming mass. Mixing of various quartz grains sizes in the exact proportion suitable for small, medium and large sizes of induction furnaces. It is suitable with high temperature up to 1750^oc.

This refractory mix is high alumina mix where in predominant aggregate component of alumina imparts a strong skeleton aggregate structure of superior uniform heat stability. The refractory mix is characterized by an ability to withstand corrosive-errosive attack of molten metals and their acids, semi basic and basic slags during repeated exposure thereto together with excellent volume stability, superior structure heat stability, low apparent porosity, a high contact angle with molten steel and strong abrasion resistance Matrix.
The refractory mix is produced by selecting specific fractions of alumina grains used in high performance refractories along with various Chrome compounds, combination of special clays, as tackifying agents are used, which has good plasticity , does not swell in water, stands high temperature along with binder to increase strength of the lining at elevated temperatures. Importance of bulk density is always considered and maintained for which different fractions of components are used in the matrix.

High thermal stability, corrosion resistance and wear resistance makes our Silica Ramming Mass the preferred choice among customers. The company is a reputed Manufacturer, Supplier and Exporter of Silica Ramming Mass from Jaipur, India. Silica Ramming Mass is used in the lining of induction furnaces, which results in the smooth working of furnaces, optimum output and better metallurgical control. The granulation of the Silica Ramming Mass is strictly optimized by keeping in view the furnace make and capacity, thus giving maximum and best results.

Chemical composition :

• Silica (Sio₂) : 99%
• Alumina (Al₂0₃) : 0.04%
• Ferric oxide (Fe₂0₃) : 0.04%