Our Products
Limit Controller
2 Products availableClocks
2 Products availableThermocouple
1 Products availableHeating Elements
1 Products availableBandages
1 Products availableJigs, Casting Dies, Die Casting Moulds & Moulding Tools
1 Products availableOur product range contains a wide range of Digital Temperature Controller, Digital Temp. Controllers, Analog Temp. Controllers and analog temperature controller
Anupam's Digital Temperature Controller comes with a display size is '1' inch. It is easy to read from a long distance. The instrument is housed in 72H X 144W Din size box.
Features
The display size is '1' inch. It is easy to read from a long distance. The instrument is housed in 72H X 144W Din size box.
FEATURES
Element Type | Specification |
Principle | Input suitably signal conditioned, amplified, linearised as required and displayed. |
Inputs | J, K,R,S,T and other thermocouples, R.T.D.'s like Pt-50, Pt-100 (2,3 wire), 4-20mA, 0-1 VDC ......etc.... |
Range, Accuracy Resolution | Refer Table - A |
Cold Junction Compensation | Automatic |
Sensor Open | Display indicates "1" |
Display | 31/2 digit bright L.E.D. (.5") in nippon 1010 41/2 digit bright L.E.D. (.5") in nippon 1010A. |
Ambient Temperature | 0-55 ºC |
Humidity | 95% RH |
Supply Voltage | 230 VAC ± 10%, 50Hz, also available 90-260 VAC on request. |
Box Size | 48H X 96W X 180D in mm 1/8 DIN size (72W X 72H also available) |
MODEL NO. | SENSOR | RANGE | CALIBRATION ACCURACY | RESOLUTION ºC / ºF |
Anupam 2020A | Pt-100 (2,3 wire) | -100.0 to 600.0 ºC - 148.0 to 1112.0 ºF |
0.25% | 0.1 |
Anupam 2020 | Pt-100 | -100.0 to 199.9 ºC - 148.0 to 199.9 ºF |
0.25% | 0.1 |
Anupam 2020 | Pt-100 | -100.0 to 600.0 ºC - 148.0 to 1112.0 ºF |
0.25% | 1 |
Anupam 2020 | Iron / Constantan (J) | -100.0 to 600.0 ºC - 148.0 to 1112.0 ºF |
0.1% | 1 |
Anupam 2020 | Chrome / Alumel (K) | -80.0 to 1200.0 ºC - 112.0 to 1999.0 ºF |
0.7% | 1 |
Anupam 2020 | Pt / Rh (R, S) | -900.0 to 1600.0 ºC - 1652.0 to 1999.0 ºF |
0.5% | 1 |
They are most rudged, reliable, economical and widely accepted solution for Plastic moulding, Laminating, Heat sealing & Pharmaceutical machines. They are useful in many other temperature applications like ovens, furnaces, dryers, chemical plants, Foundry etc.
FEATURES
Element Type | Specification |
Inputs | Fe/K,Cr/Al, Pt-Pt Rh & other thermocouples, Pt-100, Pt-50 RTD's....etc.... |
Range | 0-100,0-400,0-600, 0-1200, 900-1600°C.... etc.... |
Setting | With knob and attractive calibrated dial. |
Set Point Accuracy | ±0.8% of Span |
Output | Relay rated 230V/10A |
Control | On-Off or Time Proportional. On-Off control with 2°C dead band. Time Proportional control with ±2°C hysteresis & 15 second time cycle. Time Proportional Control as per the application. |
Deviation Meter | Nippon 2000D is with -20°C to +20°C deviation indicator showing deviation between set and process temperature. |
L.E.D. Indicators | Green L.E.D. indicaters relay on. Red L.E.D. indicaters relay off. |
Box Size | Modular design in 96H x 96W x 100D DIN size box 72H x 72W x 100D DIN size box 48H x 48W x 100D DIN size box DIN Rail Box |
Supply : | 230 VAC ± 10% 50HZ |
Blind temperature controllers with deviation meter and without deviation meter respectively. They are most rudged, reliable, economical and widely accepted solution for Plastic moulding, Laminating, Heat sealing & Pharmaceutical machines. They are useful in many other temperature applications like ovens, furnaces, dryers, chemical plants, Foundry etc.
Features