Our Products
Clocks
2 Products availableRelays
1 Products availableTesting Equipment
1 Products availableRailway, Railroad & Train Components
1 Products availableSecurity Alarms & Devices
1 Products availableOur product range contains a wide range of Warning bell for level crossing, Earth Leakage Detector, Cross Talk Measuring Set, Way Station Equipment and control telephone
We are the leading manufacturer, exporter and supplier of LED Street Lights based on light emitting diodes with long life and high lumen output. |
FEATURES
Additional Information:
Payment Terms :
Delivery Time : 1 week
We offer our clients a wide range of Warning bell for level crossing. These products are used to address the most demanding Warning bell for level crossing. The products offered by us are made using superior quality raw material keeping in mind the needs and requirements of our clients. It is mainly designed for cauctioning the traffic at level crossing gates to indicate that the gates are closed for pedestrians & other traffic as trains are nearing the gates. |
We manufacture safe electronic timer which replaces the thermal element relay used in signaling circuits. This fully solid state device is relay less and the time base is generated through a quartz crystal to give a high repeat accuracy. It is meant to control railway signaling circuits where a fixed time delay of 60 or 120 seconds is required. It works on 24V DC power supply.
We offer Earth Leakage Detector which is commonly known as ELD, this equipment continuously monitors the insulation of a cable with respect to the Earth. It is widely used in railways to monitor signaling cables on AC and DC circuits. The leakage value can be pre-set by the user in the range of 2K Ohm to 1 Meg ohm. Available in multiple of 4 Channels i.e. 4/8/12 Channels. The single/ multi channel equipment has twin indicating arrangements of an audio alarm plus a panel meter. It also includes a built-in Cable Insulation Tester.
Cable Insulation Tester is similar to ELD with the most important difference that this monitors the signaling cables in un-energized mode. Insulation Resistance value ranging from 500 KO to 100 MO. It has a special feature, in case a pair is energized the instrument automatically stops functioning.
Our delay timer is available from 1 sec to 60 minutes timings in 10 steps with a choice of ON/OFF delay. The timer is suitable for continuous working in railway signaling and indoor use. Two change-over un-energized contacts with 5 Amps rating are provided on DIN rail 35mm enclosure.
Our cross talk measuring set is a portable instrument which is capable of measuring cross talk in the audio frequency range with a built-in AF generator and measuring detector. As the measuring range starts from zero dB it can be conveniently used as a transmission measuring set. With a measuring range from +10 to -80 dB is is suitable for 470/600/1120 U impedance.
Also called as train traffic control equipment, our control office equipment works on DTMF voice frequency signaling and has applications in omnibus speech circuits like section control, TPC control, Deputy Control etc., used in railways. This equipment mainly consists of a code generator and two way voice communication, which can run in two-wire as well as four- wire control circuits in conjunction with the way station equipment.
We manufacture Way Station Equipment(2W/4W) which is separately available for two- wire and four-wire operation. It consists of voice communication circuit, code reception and recognition circuit with ringing and ring-back transmission facility.br />
We manufacture Control Telephone(2W/4W) which is used with their respective way station equipment. This telephone facilitates communication between the controller and the way station working on two/four-wire.
Our electronic magneto telephone is designed to meet communication requirement in railways and similar set-ups in between two or more stations. It is fully solid state and works on 3Volts through built-in case for 2X D3 cells or alternately connected through 3Volts battery. It operates within a radius of 65 km and is designed to replace magneto telephone with a hand-cranking generator.
Flasher Relay is used in railway signaling installations to give flashes at the rate of 40 to 60 per minute. Potential free contacts are given to bear a load from 3 t01 0 Amps in different models. It is so designed that the failure of any component results in no indication. Encased in a sheet metal box has also an over voltage protection. It is available in different models to work at 12 or 24 or 60V DC or 110V AC.
Providing you the best range of Railway Signalling Equipment such as Flasher Relay, Fail Safe Electronic Timer, Earth Leakage Detector, Cable Insulation Tester and Delay Timer with effective & timely delivery.
Under the guidance, direction and motivation of our founder member, we have shown tremendous progress in the field of electronic industry. With state-of-the-art manufacturing unit and highly trained electronic engineers, our products are compact and maintenance free. We also have a team of qualified technocrats who can prepare the designs according to the usage and utility of the products so that they fulfill the customer's requirements.
We manufacture transmission measuring set which is designed to fulfill all type of requirements for determination of signal level, insertion loss, transmission loss and return loss in cable circuits used in audio telephones. With a measuring range from + 10 to -50 dB it is battery operated with a built in charger which is ideal for the field use. It is suitable for 600 and 1120 impedance.