Antique Tile Grout Golden is a High Polymer based fine powder consisting of portland cement, specially selected polymer, properly selected & graded fine fillers, additives and inorganic chemicals. It is used for grouting of tiles, stones, marble joints & edges because it has water repellency properties, excellent adhesion (high bonding strength), soft consistency, workability and seals joint permanently. It is nonshrinking, non-toxic and odourless grout used for sealing of swimming pool & water tank joints as well. Areas of Application Antique Tile Grout Golden is used for grouting of ceramic tiles, marbles, natural stones and edges. *Specially formulated for wet or submerged grouting applications such as swimming pool, bathrooms, toilets, fountains and kitchen areas. *It can be used for external and internal areas. *It is used in residential and commercial areas. *Application up to joint width of 2-10mm. *It is excellent for highly glazed tiles to give a smooth and watertight joints which when set will be both water and mould resistant. Features & Benefits *Aesthetics – Available in specify shades. *Easy to use – Easily to mix with water and forms soft consistency paste which is easy to fill the joints. *Shrinkage & cracking – Avoids cracks formation in the joints and also there is negligible shrinkage. *Service Temperature – Specially formulated for temperature range of 50– 1500C. * Water resistant – Excellent water-resistance making it beneficial for application in areas immersed under water. * Durability & UV resistant – Excellent UV resistance & durability enables the product use for exterior application. * High Strength & abrasion resistant – High strength & abrasion resistance properties makes it suitable for grouting of toilets & bathrooms. Method of Application 1 Surface Preparation * Surface must be cleaned and should be free from dirt, cured tile adhesive. Remove dust with wire brush & by air blower. * For exterior grouting application, wet the tiles prior to applying Antique Tile Grout Golden 2 Mixing * Add the grout powder to the mixing water (w:p ratio – 1 : 2.5 by volume) and mix with slow speed drill (250-300 rpm) to a soft & smooth consistency paste. * If the grout mortar has become too stiff to work, it should be discarded and a new batch should be prepared. 3 Application Apply to the tile joints with squeegee, spatula or putty blade. After application flush the surface of tile using a hard rubber float, working diagonally across the grout joints to fill and compact the joints. All excess grout should be removed with the same rubber float without any delay. *Lesser the quantity of grout left on the face of the tiles while application, the final cleaning will be easier with Antique Tiles & Grout Cleaner – 225. *However, it is important to allow the grout to set in the joint and to let it acquire its initial set before any further cleaning. After the initial set of the grout, clean the tile surface with a pad of cheesecloth or towel dampened with minimum quantity of clean and cool water. Rub in a circular motion to further compact the grout. *The remaining surface grout on the tile can also be cleaned at this time. Scrubbing pad fastened to a float works very well to remove grout from the porous tiles. *Rebuff the tile surface and grout within 1-2 hours to remove all weep water and grout residue from the surface, which helps to reduce the efflorescence and to control colour variation. 4 CLEANING *Polish the tiles when the job is complete with a clean dry cloth. Scrubbing the floor with hot water and soap water is the best. *Due to polymer content, it is advisable to clean the surface immediately after the grouting. Precautions & Limitations *Do not mix excess water. * Antique Tile Grout Golden cannot be used where high acid resistance is required because of its cement base. *The potential for efflorescence is inherent in all cement-based products and it is not to be considered as a manufacturing defect.

Single component Polymer modified Bituminous Waterproof Coating. DESCRIPTION Antique Seal – 115 is composed of viscous, polymer modified, mineral fillers, additives and water as a medium. It is used as a waterproof & weatherproof membrane for concealed roofs, walls of the building structures because it forms relatively thick film and bonds firmly to cementitious surfaces, protects wood & timber and prevents rust formation. Waterproofing is achieved by applying Antique Seal – 115 by brush or mop. It forms joint less and seamless membrane. Areas of Application Waterproofing of concealed roofs, wall, water tank, swimming pool, *Corrosion protection for concrete from sea water. Features & Benefits * Waterproofing – Exceptionally good waterproofing. *Ease of application – Cold applied, bituminous emulsion material. Easily applied by brush or mop. * Durability – Forms relatively thick (1.2-1.5 mm) film providing excellent impermeable and durable membrane. * Movement accommodation – Polymer modified hence forms flexible film. Also accommodates thermal stresses in slab due to variation in temperature. * Reinforcement – Higher reinforcement can be induced with polyester fibre sheet between the coats. * Self priming – No separate or additional primer is required. Method of Application 1 SURFACE PREPARATION *Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. *Mechanical means such as wire brushing & shot blasting can be used. *Finally vacuum cleaning of all loose solids and liquids can be done if required. *All surface cracks up to 5 mm width should be filled up with Antique Non Shink Crack-x. Cracks more than 5 mm and all separation gaps should be filled up with Antique Flexi Bond URP Modified Adhesive as specified. 2 APPLICATION * Apply Three coats directly by brush or mop and dilute Antique Seal – 115 with three part of water & one part of Antique Seal – 115 powder. * Apply 2nd & 3rd coat in gapes of two or three hours. 3 CLEANING Tools & equipments should be cleaned with potable water immediately after use. Cured material can be cleaned by scrapping

antique tile grout silver is a fine powder consisting of portland cement, specially selected polymer, properly selected & graded fine fillers, additives and inorganic chemicals. It is used for grouting of tiles, stones, marble joints & edges because it has water repellency properties, excellent adhesion (high bonding strength), soft consistency, workability and seals joint permanently. It is non-shrinking, non-toxic and odourless grout used for sealing of swimming pool & water tank joints as well. areas of application antique tile grout silver is used for grouting of ceramic tiles, marbles, natural stones and edges. *specially formulated for wet or submerged grouting applications such as swimming pool, bathrooms, toilets, fountains and kitchen areas. *it can be used for external and internal areas. *it is used in residential and commercial areas. *application up to joint width of 2-4mm. *it is excellent for highly glazed tiles to give a smooth and watertight joints which when set will be both water and mould resistant. features & benefits *aesthetics – available in specify shades. *easy to use – easily to mix with water and forms soft consistency paste which is easy to fill the joints. *shrinkage & cracking – avoids cracks formation in the joints and also there is negligible shrinkage. *service temperature – specially formulated for temperature range of 5° – 120°c. * water resistant – excellent water-resistance making it beneficial for application in areas immersed under water. * durability & uv resistant – excellent uv resistance & durability enables the product use for exterior application. * high strength & abrasion resistant – high strength & abrasion resistance properties makes it suitable for grouting of toilets & bathrooms. method of application 1 surface preparation * surface must be cleaned and should be free from dirt, cured tile adhesive. Remove dust with wire brush & by air blower. * for exterior grouting application, wet the tiles prior to applying antique tile grout silver. 2 mixing * add the grout powder to the mixing water (w:p ratio – 1 : 2.5 by volume) and mix with slow speed drill (250-300 rpm) to a soft & smooth consistency paste. * if the grout mortar has become too stiff to work, it should be discarded and a new batch should be prepared. 3 application apply to the tile joints with squeegee, spatula or putty blade. After application flush the surface of tile using a hard rubber float, working diagonally across the grout joints to fill and compact the joints. All excess grout should be removed with the same rubber float without any delay. *lesser the quantity of grout left on the face of the tiles while application, the final cleaning will be easier. With antique tiles & grout cleaner – 225. *however, it is important to allow the grout to set in the joint and to let it acquire its initial set before any further cleaning. After the initial set of the grout, clean the tile surface with a pad of cheesecloth or towel dampened with minimum quantity of clean and cool water. Rub in a circular motion to further compact the grout. *the remaining surface grout on the tile can also be cleaned at this time. Scrubbing pad fastened to a float works very well to remove grout from the porous tiles. *rebuff the tile surface and grout within 1-2 hours to remove all weep water and grout residue from the surface, which helps to reduce the efflorescence and to control colour variation. 4 cleaning *polish the tiles when the job is complete with a clean dry cloth. Scrubbing the floor with hot water and soap water is the best. *due to polymer content, it is advisable to clean the surface immediately after the grouting. precautions & limitations *do not mix excess water. * antique tile grout silver cannot be used where high acid resistance is required because of its cement base. *the potential for efflorescence is inherent in all cement-based products and it is not to be considered as a manufacturing defect.

Antique Set Plus Copper Adhesive (Grey) PRODUCT DETAILS Grey, high polymer modified tile adhesive, suitable for fixing tiles & natural stones in interior situations. Applications and more difficult and demanding situations consult Antique regarding use of a higher performance adhesive. SHELF LIFE AND STORAGE Shelf life is 12 months from the date of manufacturing in unopened condition.Store in a cool and dry place. COVERAGE This will depend on the nature and flatness of the surface and the method of application, but at 3 mm thickness its is approx. 55-60 sq. ft. per 20kg bag when using a thin bed trowel.For good coverage, it is vitally important that all surfaces should be clean, smooth, plumb, level and free from defects and undulations. PACKAGING : 20kg

Antique Adhesive Silver (Grey) is composed of ordinary portland cement properly selected & graded aggregates, polymer, rheology modifier & additives. It is used for fixing of tiles internally & externally floors because it gives excellent bond on cementitious surfaces like, concrete, plaster, etc. It forms a waterproof barrier between two surfaces and has excellent ‘grab’ properties of tiles to the substrate. Areas of Application For fixing all types of Flooring tiles on internal & external, * Floors. Features & Benefits * Ease of application – Ready to use, needs only mixing with water. * Adhesion – Excellent adhesion prevent falling of tiles. * Shrinkage – Low shrinkage hence prevents cracking of tiles & joints. * Flexibility – Sufficiently flexible to accommodate physical & thermal movements. * Water resistance – Excellent water resistance. * Curing – Needs no water curing, hence saves labour & time. * Traffic ability – Floors can be used after 24 hours of application. * Soaking -Soaking of tiles & backing of surface not required * Slip resistance – Non slip resistance is an advantage to fasten the work * Toxicity – Non toxic Method of Application 1. SURFACE PREPARATION * The surface should be sound, clean, and free from dirt, oil or grease before Antique Adhesive Silver (Grey) is applied. * Substrate should be in Saturated Surface Dry (SSD) condition before application of adhesive. * Substrates should be in plumb before application of adhesive 2. MIXING * Mix 20 kg of Antique Adhesive Silver (Grey) with 5 to 5.5 liters of water. * Mix to a uniform lump-free consistency using a forced action mixer. * Keep it for approximately 5 minutes to fatten it. * Hand mixing is recommended for small quantities only. * Mix as much quantity as can be consumed in 60 min. 3. APPLICATION Apply Antique Adhesive Silver (Grey) paste on substrate with plain side of notch trowel. Press paste firmly to work into substrate. * Comb with notch trowel with notched side, notch trowel to be selected as per required bed thickness. * Spread as much adhesive paste as can be tiled within 15 minutes. * Start placing/fixing of tiles & tap using beating block or rubber mallet. * For large format tiles & stone provide back butter for 100 % coverage & firm bonding. * Periodically remove a tile to check transfer of material on tile. Also check spread of adhesive, if not proper and if becomes non-sticky then scrap it & apply paste again.. 4. GROUTING * Grouting should preferably be carried out at least 24 hours after the completion of tiling * For grout joints upto 3mm wide use Antique Adhesive Silver (Grey) * For grout joints above 3mm wide use RTM Wide. * After grouting clean and polish tiles with a damp sponge or cloth 5. CLEANING * Clean the tools & equipments with potable water immediately after use. Precautions & Limitations * Always add powder to liquid and not liquid to powder. * While working in temperature more than 35OC ( 95OF ) always dampen the substrate & finish faster. * Tiling should not be done when surface temperature is below 4OC. * Antique Adhesive Silver (Grey) should not be used on painted , metal surfaces, ply & gypsum boards.  

  Antique Tile Grout Golden is a High Polymer based fine powder consisting of portland cement, specially selected polymer, properly selected & graded fine fillers, additives and inorganic chemicals. It is used for grouting of tiles, stones, marble joints & edges because it has water repellency properties, excellent adhesion (high bonding strength), soft consistency, workability and seals joint permanently. It is nonshrinking, non-toxic and odourless grout used for sealing of swimming pool & water tank joints as well. Areas of Application Antique Tile Grout Golden is used for grouting of ceramic tiles, marbles, natural stones and edges. *Specially formulated for wet or submerged grouting applications such as swimming pool, bathrooms, toilets, fountains and kitchen areas. *It can be used for external and internal areas. *It is used in residential and commercial areas. *Application up to joint width of 2-10mm. *It is excellent for highly glazed tiles to give a smooth and watertight joints which when set will be both water and mould resistant. Features & Benefits *Aesthetics – Available in specify shades. *Easy to use – Easily to mix with water and forms soft consistency paste which is easy to fill the joints. *Shrinkage & cracking – Avoids cracks formation in the joints and also there is negligible shrinkage. *Service Temperature – Specially formulated for temperature range of 50– 1500C. * Water resistant – Excellent water-resistance making it beneficial for application in areas immersed under water. * Durability & UV resistant – Excellent UV resistance & durability enables the product use for exterior application. * High Strength & abrasion resistant – High strength & abrasion resistance properties makes it suitable for grouting of toilets & bathrooms. Method of Application 1 Surface Preparation * Surface must be cleaned and should be free from dirt, cured tile adhesive. Remove dust with wire brush & by air blower. * For exterior grouting application, wet the tiles prior to applying Antique Tile Grout Golden 2 Mixing * Add the grout powder to the mixing water (w:p ratio – 1 : 2.5 by volume) and mix with slow speed drill (250-300 rpm) to a soft & smooth consistency paste. * If the grout mortar has become too stiff to work, it should be discarded and a new batch should be prepared. 3 Application Apply to the tile joints with squeegee, spatula or putty blade. After application flush the surface of tile using a hard rubber float, working diagonally across the grout joints to fill and compact the joints. All excess grout should be removed with the same rubber float without any delay. *Lesser the quantity of grout left on the face of the tiles while application, the final cleaning will be easier with Antique Tiles & Grout Cleaner – 225. *However, it is important to allow the grout to set in the joint and to let it acquire its initial set before any further cleaning. After the initial set of the grout, clean the tile surface with a pad of cheesecloth or towel dampened with minimum quantity of clean and cool water. Rub in a circular motion to further compact the grout. *The remaining surface grout on the tile can also be cleaned at this time. Scrubbing pad fastened to a float works very well to remove grout from the porous tiles. *Rebuff the tile surface and grout within 1-2 hours to remove all weep water and grout residue from the surface, which helps to reduce the efflorescence and to control colour variation. 4 CLEANING *Polish the tiles when the job is complete with a clean dry cloth. Scrubbing the floor with hot water and soap water is the best. *Due to polymer content, it is advisable to clean the surface immediately after the grouting. Precautions & Limitations *Do not mix excess water. * Antique Tile Grout Golden cannot be used where high acid resistance is required because of its cement base. *The potential for efflorescence is inherent in all cement-based products and it is not to be considered as a manufacturing defect.

Single component Polymer modified Bituminous Waterproof Coating. DESCRIPTION Antique Seal – 115 is composed of viscous, polymer modified, mineral fillers, additives and water as a medium. It is used as a waterproof & weatherproof membrane for concealed roofs, walls of the building structures because it forms relatively thick film and bonds firmly to cementitious surfaces, protects wood & timber and prevents rust formation. Waterproofing is achieved by applying Antique Seal – 115 by brush or mop. It forms joint less and seamless membrane. Areas of Application Waterproofing of concealed roofs, wall, water tank, swimming pool, *Corrosion protection for concrete from sea water. Features & Benefits * Waterproofing – Exceptionally good waterproofing. *Ease of application – Cold applied, bituminous emulsion material. Easily applied by brush or mop. * Durability – Forms relatively thick (1.2-1.5 mm) film providing excellent impermeable and durable membrane. * Movement accommodation – Polymer modified hence forms flexible film. Also accommodates thermal stresses in slab due to variation in temperature. * Reinforcement – Higher reinforcement can be induced with polyester fibre sheet between the coats. * Self priming – No separate or additional primer is required. Method of Application 1 SURFACE PREPARATION *Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. *Mechanical means such as wire brushing & shot blasting can be used. *Finally vacuum cleaning of all loose solids and liquids can be done if required. *All surface cracks up to 5 mm width should be filled up with Antique Non Shink Crack-x. Cracks more than 5 mm and all separation gaps should be filled up with Antique Flexi Bond URP Modified Adhesive as specified. 2 APPLICATION * Apply Three coats directly by brush or mop and dilute Antique Seal – 115 with three part of water & one part of Antique Seal – 115 powder. * Apply 2nd & 3rd coat in gapes of two or three hours. 3 CLEANING Tools & equipments should be cleaned with potable water immediately after use. Cured material can be cleaned by scrapping

antique tile grout silver is a fine powder consisting of portland cement, specially selected polymer, properly selected & graded fine fillers, additives and inorganic chemicals. It is used for grouting of tiles, stones, marble joints & edges because it has water repellency properties, excellent adhesion (high bonding strength), soft consistency, workability and seals joint permanently. It is non-shrinking, non-toxic and odourless grout used for sealing of swimming pool & water tank joints as well. areas of application antique tile grout silver is used for grouting of ceramic tiles, marbles, natural stones and edges. *specially formulated for wet or submerged grouting applications such as swimming pool, bathrooms, toilets, fountains and kitchen areas. *it can be used for external and internal areas. *it is used in residential and commercial areas. *application up to joint width of 2-4mm. *it is excellent for highly glazed tiles to give a smooth and watertight joints which when set will be both water and mould resistant. features & benefits *aesthetics – available in specify shades. *easy to use – easily to mix with water and forms soft consistency paste which is easy to fill the joints. *shrinkage & cracking – avoids cracks formation in the joints and also there is negligible shrinkage. *service temperature – specially formulated for temperature range of 5° – 120°c. * water resistant – excellent water-resistance making it beneficial for application in areas immersed under water. * durability & uv resistant – excellent uv resistance & durability enables the product use for exterior application. * high strength & abrasion resistant – high strength & abrasion resistance properties makes it suitable for grouting of toilets & bathrooms. method of application 1 surface preparation * surface must be cleaned and should be free from dirt, cured tile adhesive. Remove dust with wire brush & by air blower. * for exterior grouting application, wet the tiles prior to applying antique tile grout silver. 2 mixing * add the grout powder to the mixing water (w:p ratio – 1 : 2.5 by volume) and mix with slow speed drill (250-300 rpm) to a soft & smooth consistency paste. * if the grout mortar has become too stiff to work, it should be discarded and a new batch should be prepared. 3 application apply to the tile joints with squeegee, spatula or putty blade. After application flush the surface of tile using a hard rubber float, working diagonally across the grout joints to fill and compact the joints. All excess grout should be removed with the same rubber float without any delay. *lesser the quantity of grout left on the face of the tiles while application, the final cleaning will be easier. With antique tiles & grout cleaner – 225. *however, it is important to allow the grout to set in the joint and to let it acquire its initial set before any further cleaning. After the initial set of the grout, clean the tile surface with a pad of cheesecloth or towel dampened with minimum quantity of clean and cool water. Rub in a circular motion to further compact the grout. *the remaining surface grout on the tile can also be cleaned at this time. Scrubbing pad fastened to a float works very well to remove grout from the porous tiles. *rebuff the tile surface and grout within 1-2 hours to remove all weep water and grout residue from the surface, which helps to reduce the efflorescence and to control colour variation. 4 cleaning *polish the tiles when the job is complete with a clean dry cloth. Scrubbing the floor with hot water and soap water is the best. *due to polymer content, it is advisable to clean the surface immediately after the grouting. precautions & limitations *do not mix excess water. * antique tile grout silver cannot be used where high acid resistance is required because of its cement base. *the potential for efflorescence is inherent in all cement-based products and it is not to be considered as a manufacturing defect.

Antique Set Plus Copper Adhesive (Grey) PRODUCT DETAILS Grey, high polymer modified tile adhesive, suitable for fixing tiles & natural stones in interior situations. Applications and more difficult and demanding situations consult Antique regarding use of a higher performance adhesive. SHELF LIFE AND STORAGE Shelf life is 12 months from the date of manufacturing in unopened condition.Store in a cool and dry place. COVERAGE This will depend on the nature and flatness of the surface and the method of application, but at 3 mm thickness its is approx. 55-60 sq. ft. per 20kg bag when using a thin bed trowel.For good coverage, it is vitally important that all surfaces should be clean, smooth, plumb, level and free from defects and undulations. PACKAGING : 20kg

Antique Adhesive Silver (Grey) is composed of ordinary portland cement properly selected & graded aggregates, polymer, rheology modifier & additives. It is used for fixing of tiles internally & externally floors because it gives excellent bond on cementitious surfaces like, concrete, plaster, etc. It forms a waterproof barrier between two surfaces and has excellent ‘grab’ properties of tiles to the substrate. Areas of Application For fixing all types of Flooring tiles on internal & external, * Floors. Features & Benefits * Ease of application – Ready to use, needs only mixing with water. * Adhesion – Excellent adhesion prevent falling of tiles. * Shrinkage – Low shrinkage hence prevents cracking of tiles & joints. * Flexibility – Sufficiently flexible to accommodate physical & thermal movements. * Water resistance – Excellent water resistance. * Curing – Needs no water curing, hence saves labour & time. * Traffic ability – Floors can be used after 24 hours of application. * Soaking -Soaking of tiles & backing of surface not required * Slip resistance – Non slip resistance is an advantage to fasten the work * Toxicity – Non toxic Method of Application 1. SURFACE PREPARATION * The surface should be sound, clean, and free from dirt, oil or grease before Antique Adhesive Silver (Grey) is applied. * Substrate should be in Saturated Surface Dry (SSD) condition before application of adhesive. * Substrates should be in plumb before application of adhesive 2. MIXING * Mix 20 kg of Antique Adhesive Silver (Grey) with 5 to 5.5 liters of water. * Mix to a uniform lump-free consistency using a forced action mixer. * Keep it for approximately 5 minutes to fatten it. * Hand mixing is recommended for small quantities only. * Mix as much quantity as can be consumed in 60 min. 3. APPLICATION Apply Antique Adhesive Silver (Grey) paste on substrate with plain side of notch trowel. Press paste firmly to work into substrate. * Comb with notch trowel with notched side, notch trowel to be selected as per required bed thickness. * Spread as much adhesive paste as can be tiled within 15 minutes. * Start placing/fixing of tiles & tap using beating block or rubber mallet. * For large format tiles & stone provide back butter for 100 % coverage & firm bonding. * Periodically remove a tile to check transfer of material on tile. Also check spread of adhesive, if not proper and if becomes non-sticky then scrap it & apply paste again.. 4. GROUTING * Grouting should preferably be carried out at least 24 hours after the completion of tiling * For grout joints upto 3mm wide use Antique Adhesive Silver (Grey) * For grout joints above 3mm wide use RTM Wide. * After grouting clean and polish tiles with a damp sponge or cloth 5. CLEANING * Clean the tools & equipments with potable water immediately after use. Precautions & Limitations * Always add powder to liquid and not liquid to powder. * While working in temperature more than 35OC ( 95OF ) always dampen the substrate & finish faster. * Tiling should not be done when surface temperature is below 4OC. * Antique Adhesive Silver (Grey) should not be used on painted , metal surfaces, ply & gypsum boards.