Ansh Con Power Control System

Wazirpur, Delhi

Highlights

• Up to 30% smaller than the competition
• Current vector control, open loop
• RoHS compliance
• On-line tuning
• Induction motor (IM) or permanent magnet motor (PM) operation
• Function Block Diagram (FBD) programming via DriveWorksEZ™
• Side-by-side installation due to patented hybrid heatsink
• Removable terminal block with parameter backup function
• One-touch copy function with verify
• Super-fast 2 ms scan cycle with dual CPU
• EN954-1 Safety Cat. 3, Stop Cat. 0
• Increased vibration resistance, from 20 Hz to 50 Hz (0.65G)
• 1 in 10, 000 failure rate
• Swing PWM function to decrease noise at low carrier frequencies
• Pre-maintenance function
• Modbus communication
• Cooling fan replacement without tools
• MTBF: 28 years
• Short Circuit Current Rating (SCCR): 30kA rms symmetrical
• Common programming with all other Yaskawa drives
• DriveWizard software available at no extra cost

Altivar Machine ATV320, a variable speed drive designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements for 3 Phase synchronous and asynchronous motors from 0.18 kW to 15 kW (0.25 HP to 20 Hp).

The Lx2000 is designed specifically to add power to elevator performance. Built to L&T's stringent quality standards, the Lx2000 is tested and certified to meet global benchmarks, thus giving you the assurance of total reliability. It handles loads up to 45 kW, and is engineered to keep your elevator operating at optimum efficiency, even in the hot, humid and dusty conditions that characterise India's industrial environment.The Lx2000 is designed specifically to add power to elevator performance. Built to L&T’s stringent quality standards, the Lx2000 is tested and certified to meet global benchmarks, thus giving you the assurance of total reliability.It handles loads up to 22kW, and is engineered to keep your elevator operating at optimum efficiency, even in the hot, humid and dusty conditions that characterise India’s industrial environment.

This amazing AC drive is the ultimate performancesolution with increased speed and torque response to provide servo-like performance from an induction motor. In addition, the G7 drive has the world’s first 480V 3-level inverter architecture that eliminates or minimizes the installation problems associated with IGBT switching and protects the entire motor-drive system.G7 drive performance makes it the ideal drive for high performance,  speed, torque, or position control applications. Several control modes are provided. In open loop vector mode, the latest flux observer algorithms extend speed range and provide maximum starting torque.In closed loop vector mode, 0.01% speed regulation and 1000:1 control range can be achieved. Zero-servo capability provides position control at zero speed.The G7 drive has the world’s first 480V 3-level inverter architecture for total system protection. This patented designcan eliminate peripheral components typically required to solveinstallation problems. The G7 allows motor operation at very long cable lengths, meeting NEMA MG1 Part 31, with peak voltage being 30% less than conventional drives. With motor bearing current being typically 50% less than standard drives, the G7 provides four times the motor bearing life. Audible motor noise on the 480V G7 drive is 5-10dB (20%)less than the prior generation drive, even when operating at half the carrier frequency. Common mode current is half that of competitor drives.

Parameters can be copied/loaded from the drive to the smart copier and vice versa – simply with the keypad. It produces a starting torque of 200% at 0.5 Hz, which provides better control at low-speed. Its compact size enables panel-size reduction, hence helps in space-efficient design. It has safety features like Safe Torque Off (STO) with redundant input circuit which meet EN 61508 SIL 2 standards.
The Sx2000 is built to deliver powerful performance. It handles loads up to 75 kW (HD) / 90 kW (ND) – making it perfect for compressors, conveyors, machine tools, elevators, textiles, fans, pumps, plastic extruders, wire drawings, etc.L&T SX2000 SERIES

AC Drives Range

• Single-Phase 230V - 0.75 kW to 3.7kW
• Three-Phase 230V - 0.75 kW to 18.5 kW
• Three-Phase 415V - 0.75 kW to 90 kW IP66
• Three-Phase 415V - 0.75 kW to 22 kW

The Cx2000 adds a new dimension to L&T's AC drive solutions. Built to L&T's stringent quality standards, the Cx2000 is tested and certified to meet global benchmarks, thus giving you the assurance of total reliability.Compact, lightweight, easy to install, operate and service – the Cx2000 is perfectly suited for conveyors, pumps, fans and textile machinery. It handles loads up to 11 kW, and is engineered to keep your machine operating at optimum efficiency, even in the hot, humid and dusty conditions that characterise India's industrial environment.

L&T CX2000 Series Ac Drives Range

• Single Phase 230V - 0.1 kw to 2.2kW
• Three Phase 230V - 0.2 kW to 11kW
• Three Phase 415V - 0.75 kW to 11kW

At optimum efficiency, even in the hot, humid and dusty conditions that characterize India's industrial environment. The Fx2000 adds a new dimension to L&T's AC drive solutions. Built to L&T's stringent quality standards, the Fx2000 is tested and certified to meet global benchmarks, thus giving you the assurance of total reliability. The Fx2000 generates powerful performance and meets your precise needs through several features: superior V/F control, V/F PG, slip compensation and sensorless vector control as well as closed-loop vector control. It has a user-friendly interface and environment-friendly features, including a wide graphic LCD keypad, user and macro.group support, electro-thermal functions for motor protection, and protection for input/output phase loss. The Fx2000 is perfectly suited for the toughest, most complex applications – cranes, plastic winders, high-speed elevators, cement kilns, crushers… and more. It handles loads up to 375 kW - HD / 450 kW - ND, and is engineered to keep your machine operating at optimum efficiency, even in the hot, humid and dusty conditions that characterize India's industrial environment.The Fx2000 generates powerful performance and meets your precise needs through several features: superior V/F control, V/F PG, slip compensation and Sensorless vector control as well as closed-loop vector control. It has a user-friendly interface and environment-friendly features, including a wide graphic LCD keypad, user and macro-group support, electro-thermal functions for motor protection, and protection for input/output phase loss. The Fx2000 is perfectly suited for the toughest, most complex applications – cranes, plastic winders, high-speed elevators, cement kilns, crushers and many more. It handles loads up to 375 kW - HD / 450 kW - ND, and is engineered to keep your machine operating at optimum efficiency, even in the hot, humid and dusty conditions that characterize India's industrial environment.

Specially designed for industrial applications, the Ex2000 is perfectly suited for fan and pump applications. It can handle loads up to 450 kW, and is engineered to keep your machine operating at optimum efficiency – even in the hot, humid and dusty conditions that characterize India's industrial environment. It has features that save energy and cost, and is easy to operate.