Write a Review
Our Products
Drill & Boring Equipments
2 Products availableIndustrial Chemicals
1 Products availableTextile Chemicals
1 Products availableMagnetic Coils
1 Products availableElectric Cutting Tools
1 Products availableWood Craft
1 Products availableKitchenware And Cookware
1 Products availableOur product range contains a wide range of Gear, Brio Action Mold Remover, Epoxy Gel, Tenax and LUXLINE PLUS
The product is used to obtain a wet look, recommended for kitchen counters, bar counters and other surfaces that can come into contact with foods. The product is certified safe for contact with food, according to European standard 90/128 ECC. The product penetrates and sets in the micropores of the material, producing a permanent wet effect, as well as making the material oil and water repellent. It is generally used on rough surfaces obtained by sand-blasting, smoothing or natural splitting
Brio Action Mold Remover is a sanitizing, cleaner for marble, granite, terra-cotta, ceramic, terra-cotta, brick, block, concrete, stone or concrete based furniture, benches, decorative borders, and other hard surfaces. Brio Action Mold is specifically designed to remove mold, moss, algae, musk, and all other fungus products from all surfaces. Because it is biodegradable, it can simply be washed down the drain!
Brio Action Stain Remover and Grout Cleaner is a sanitizing, biodegradable cleaner for floors and joints. Designed to be highly effective for thorough cleansing of floors and joints with stubborn dirt that resists ordinary cleaners (old dirt, dust, cement residues, soiling caused by smog and atmospheric agents, It is also a very effective sanitizer, and it is non-toxic and environmentally friendly. Brio Action works excellent on marble, granite, ceramic, and terracotta. Because it is biodegradable, it can simply be washed down the drain!
Synthetic BOND ABRASIVES are best suited for finishing of marble, stone, and Granite etc. Our products is better than other's best available in the market.
These are available in, right from 16 Mesh size to 1500 Mesh size i.e. 1, 2, 3, 4, 5, & 6, These are available in all shapes like Frankfurt, Round, Triangle, Butterfly, Handstone & ficket etc.
Naturally we have at disposal of clients wanting products stabilized with synthetic resins, for reasons of longer than one year holding in storage and extreme climatic conditions, this kind of material able to withstand any storage time thus surpassing possible storage time of magnesite products.
This bonding matrix comprises of an oxychloride bond. The hardness of the bond is dependent on the hardness, matrix of the material being polished. The rate of reaction and the heat of reaction are altered to vary the bond strength, as required.
Magnesite Bond Abrasives are best for fast leveling of Marble, stone, granite and ceramic surface. In term of quality, we have no competitor for this range of products. We provide the best Magnetite Bond Abrasives for almost all types of surfaces.
These are available in, right from 16-mesh size to 1500-mesh size. 16, 24, 36, 46, 60, 80, 120, 220, 320, 400, 600, 1000, 1200 and 1500 or alternately 000, 00, 0, 0b, 1, 2, 2L, 3, 4 & 5.
These are available in almost all shapes like Frankfurt, round, triangle, Butterfly, Handstone & Fickert etc.
Yes, the LUX - Final Polisher for Granite is manufactured by Shanti Abrasive. It eliminates polishing with felts and powders and which is high risk polluting material.
The systematic control of the stability of the raw materials and exclusive production process, guarantees its excellent performance.
Shanti produces LUX in various shapes, it can be used on highly advanced conveying machine, as well as on the simple manually operated machine and guarantees a perfect mirror-like polish on granite.
These are available in almost all shapes like Fickert, Frankfurt & round etc.
Yes, the 5-Extra, Final Polisher for Marble is manufactured by Shanti Abrasives with the international technology.
5 extra polishing abrasive for mable - this product, based on very concentrated oxides and polishing components, is used as final rub, that is, it gives a mirror-polishing for every surface. The application of pre-polishing abrasives together with 5-extra guarantees a perfect polishing of every marble surface, without any scratch.
Yash's 5-Extra is known to be superior and is unbeatable for mirror-like polishing of of slabs, tiles and all others parts for floor and linings.
The special formulae 5-EXTRA and exclusive manufacturing system guarantee its consistency in all operating conditions. 5-EXTRA is unalterable if kept in non-humid environment. It is used after no. 6.
These are available in almost all shapes like Frankfurt, round, triangle, Butterfly etc.
EPOXY GEL is a bi-component transparent knife grade epoxy designed for gluing, laminating, and joining marble, granite, stones, and ceramic. Can be used for indoor as well as outdoor applications. Exceptional strength, great mechanical properties, and weather resistant.
| Density | 1.1(part A)/1.0 (part B) |
| Ratio weight for use | 100(partA):50(partB) |
| Processing time | 3-4 hours |
| Gel time in bulk | 10-15 minutes |
The ageing, glazing, semi polishing and final polishing products. SHANTI ABRASIVES Brushes are a must for ageing and glazing of granite, marble and agglomerate since they allow getting different finishing grades.
The filaments of all brush products are produced with DU PONT, U.S.A., material. SHANTI ABRASIVE Brushes are available in shapes like Frankfurt, Ficket and Round.
These brushes are available in the following grits 36, 46, 60, 80, 120, 180, 240, 320, 500, and 1000.
Available as Sector l4 cms for use on polishing lines. They are available for coloured granite with good gloss and high life. They ore used for block granite also.
Mastic for stuccoing, gluing, and repairing marble, granite, natural stone and agglomerates.
LIQUID / SOLID MASTICS is available in following colours:
Mastic semisolid coloured It is used to fill big holes. We suggest the usage on travertine marble and similar stones. The glue is smooth and easy to apply by hand. The hard product is well dry, polishable and grindable in a very short time.
The reactivity is very good in cold condition too. The product has low shrinkage, good adhesion in many stones.
This is formulated specifically to create a high gloss finish on stone. lt may be used on countertops, floors and as a general maintenance product. Available as Polvere Lucidante Tenalux (white) powder and Polvere Lucidante Giallo (Yellow) powder.
LUXLINE PLUSis suitable to treat on automatic line the polished surfaces of marble and granite. It increases the brightness, makes the surface more clean and enhances the colours. The product has a very good stability due to the high level of penetration on the stone. It is possible to apply the product by automatic waxing line. The wax makes a film very easy to be removed by automatic waxing heads. The effect of anti stain will be achieved after 24 hours from the treatment. In case of floor application, do not walk on the surface before.
The product is used to increase the brilliance of polished surfaces such as granite, marble, agglomerates and terrazzo or to brighten the polish dulled by time application increases the polish from a minimum of 5-6 points of gloss to a maximum of 15-16. The wax is formulated with extra-pure, special white wax products dissolved in solvents that improve their penetration in the treated materials, so as to produce a more long-lasting action.
To be used after the final polisher with very little water. it gives extra gloss and colour to the marble
Mr. Manmohan Agarwal (Anita Distributors Pvt. Ltd.)
38/1, D.l.f Indl Area, Kirti Nagar, Delhi - 110015
Share us via
