Consistenet quality and efficient production are crucial for any manufacturer's healthy bottom line. Compressed air is a vital resources in PET blow molding operation. Inferior compressed air can lead to poor or unacceptable product quality.

Chicago Pneumatic offers 100% oil free FOOD GRADE air supplying compressors specially for PET blowing industry. The wide range of standard or customised model are designed for 24 hours operation, year after year.

It is an advanced 100% oil-free reciprocoating compressor based air system. Totally engineered, Plant tested, Proven in perforance. Comes with optional built-in water/air cooling system. Needs no elaborate foundation. requires very little time and labor for installation. Ready to use. Just plug in to the power outlet and enjoy quality compressed air.

High reliability & easy of maintenance

• CP Tronic control panel for easy operation
• Mark IV regulator (CP Tronic) for control panel
• Flexible rubber hoses for water piping
• Oven painted blockand pre-painted assemblies
• Piston & rider ring designed for annual one time maintenance
• Endless construction of rider rings

Now you can say good-bye to.

• Elaborate foundation
• SIte Engineering
• Maintenance Headches

Description:

• Cylinders are manufactured by graded cast iron with OEM specifications and dimensions. Cylinders are available in all range for Aircooled and watercooled compressors.
• Cylinders are perfectly bored & honed on vertical boring machine and honing machine with all correct & permissible tolerances. Top/Bottom surfaces are duly ground & drilled with proper fixtures to ensure proper assembly with related parts.
• The length & bore of cylinder is properly maintained as per OEM for correct stroke & flow of Air/Gas & performance of unit.

CROSSHEAD

These crossheads are used in watercooled unit. It is made of individual aluminium alloy casting. Our cross heads are fully machined with proper tolerance to maintain clearance between Crosshead and guide (Dist Piece). The crossheads are having fine pitch to match the thread with Piston rod.

 

PIN CROSSHEAD

The Pin crosshead is steel material, harden ground & hollow inside for proper oil pressure of unit.Both the end of pin is grooved for locking arrangement by retainer ring. Outer surface of pin is drilled on equal distance to match the hole with bronze X-head pin bush. Both the end are closed. One end by cap & the other by plug. It is so ground & perfect tolerance is maintained so as to slide feet in crosshead bore.

Compressor Drives offered comes designed and developed using latest technology support and perfectly meets the functional requirements as per international quality system standards. Further, these compressor drives come extensively checked and tested so as to assure of reliable working performance. Some of its features include provide for flexible working support; available in different compressor capacity from 0.5 to 90m3; can handle operating temperatures of 0.5 to 3.5MPa; finish working parameters can also be custom developed as demanded by the customers.

A small, powerful machine featuring the components of larger compressors.

The tank-mounted air compressor is especially suitable for location near the application of the compressed air or as an extension to existing installations

The tank-mounted compressor with dryer is tailored to installations that need to produce compressed air with a low dew point. The unit consists of a compressor, a tank and a refrigerating dryer using R 134 gas. It features a dew-point indicator and timed condensate discharge. When oil-free compressed air is required, the unit can be fitted with a series of de-oiling filters.

Chicago Pneumatic offers 100% oil free FOOD GRADE air supplying compressors specially for PET blowing industry. The wide range of standard or customised model are designed for 24 hours operation, year after year.It is an advanced 100% oil-free reciprocoating compressor based air system. Totally engineered, Plant tested, Proven in perforance. Comes with optional built-in waterair cooling system. Needs no elaborate foundation. requires very little time and labor for installation. Ready to use. Just plug in to the power outlet and enjoy quality compressed air.

Consistenet quality and efficient production are crucial for any manufacturer's healthy bottom line. Compressed air is a vital resources in PET blow molding operation. Inferior compressed air can lead to poor or unacceptable product quality.

Chicago Pneumatic offers 100% oil free FOOD GRADE air supplying compressors specially for PET blowing industry. The wide range of standard or customised model are designed for 24 hours operation, year after year.

It is an advanced 100% oil-free reciprocoating compressor based air system. Totally engineered, Plant tested, Proven in perforance. Comes with optional built-in water/air cooling system. Needs no elaborate foundation. requires very little time and labor for installation. Ready to use. Just plug in to the power outlet and enjoy quality compressed air.

High reliability & easy of maintenance

• CP Tronic control panel for easy operation
• Mark IV regulator (CP Tronic) for control panel
• Flexible rubber hoses for water piping
• Oven painted blockand pre-painted assemblies
• Piston & rider ring designed for annual one time maintenance
• Endless construction of rider rings

Now you can say good-bye to.

• Elaborate foundation
• SIte Engineering
• Maintenance Headches

Description:

• Cylinders are manufactured by graded cast iron with OEM specifications and dimensions. Cylinders are available in all range for Aircooled and watercooled compressors.
• Cylinders are perfectly bored & honed on vertical boring machine and honing machine with all correct & permissible tolerances. Top/Bottom surfaces are duly ground & drilled with proper fixtures to ensure proper assembly with related parts.
• The length & bore of cylinder is properly maintained as per OEM for correct stroke & flow of Air/Gas & performance of unit.

CROSSHEAD

These crossheads are used in watercooled unit. It is made of individual aluminium alloy casting. Our cross heads are fully machined with proper tolerance to maintain clearance between Crosshead and guide (Dist Piece). The crossheads are having fine pitch to match the thread with Piston rod.

 

PIN CROSSHEAD

The Pin crosshead is steel material, harden ground & hollow inside for proper oil pressure of unit.Both the end of pin is grooved for locking arrangement by retainer ring. Outer surface of pin is drilled on equal distance to match the hole with bronze X-head pin bush. Both the end are closed. One end by cap & the other by plug. It is so ground & perfect tolerance is maintained so as to slide feet in crosshead bore.

Compressor Drives offered comes designed and developed using latest technology support and perfectly meets the functional requirements as per international quality system standards. Further, these compressor drives come extensively checked and tested so as to assure of reliable working performance. Some of its features include provide for flexible working support; available in different compressor capacity from 0.5 to 90m3; can handle operating temperatures of 0.5 to 3.5MPa; finish working parameters can also be custom developed as demanded by the customers.

A small, powerful machine featuring the components of larger compressors.

The tank-mounted air compressor is especially suitable for location near the application of the compressed air or as an extension to existing installations

The tank-mounted compressor with dryer is tailored to installations that need to produce compressed air with a low dew point. The unit consists of a compressor, a tank and a refrigerating dryer using R 134 gas. It features a dew-point indicator and timed condensate discharge. When oil-free compressed air is required, the unit can be fitted with a series of de-oiling filters.

Chicago Pneumatic offers 100% oil free FOOD GRADE air supplying compressors specially for PET blowing industry. The wide range of standard or customised model are designed for 24 hours operation, year after year.It is an advanced 100% oil-free reciprocoating compressor based air system. Totally engineered, Plant tested, Proven in perforance. Comes with optional built-in waterair cooling system. Needs no elaborate foundation. requires very little time and labor for installation. Ready to use. Just plug in to the power outlet and enjoy quality compressed air.