Our Products
We offer the best product range of stainless steel gear pump, Fuel Injection Gear Pump, rotary lobe pumps, Internal Gear Pump and Rotary Gear Pump.
Anivarya rotary gear pumps manufactures pumps with SS 316 construction. The pumps have SS 316 gears and shafts that are nitrided to give longer life with trouble-free performance. The shaft is supported on self lubricating type Teflon coated DU bushes and the sealing is done with Teflon based Z Pac sealant which gives zero leakage and is easy to maintain. These pumps are available in flange and foot mounting types. They can operate up to maximum pressure of 10 kgcm? and has suction lift of 5 m at rated speed of 1440 RPM. These pumps are highly suitable for pumping and transfer of corrosive chemicals, acids, dyes, resins, pigment, printing Inks and various other liquids up to viscosity of 5000 cst and temperature of 200?C. The pumps are optionally available with built in pressure relief valve. The company also offers simple design cast iron pumps for transfer of non-corrosive liquids, fuel oils, diesel oils, etc, with built-in relief valve facility. Special pumps for OEMs can also be developed as per requirement.
Features (Stainless Steel Gear Pump SS Gear Pumps) | |||||||||
| |||||||||
Application (Stainless Steel Gear Pumps SS Gear Pumps) | |||||||||
|
Pump Model | Inlet Outlet Size |
|
||||||||||||||||||
|
1/4" x 1/4" |
|
||||||||||||||||||
|
1/2" x 1/2" |
|
||||||||||||||||||
|
3/4" x 3/4" |
|
||||||||||||||||||
|
1" x 1 " |
|
||||||||||||||||||
|
1 1/4" x 1 1/4" |
|
||||||||||||||||||
|
1 1/2" x 1 1/2" |
|
||||||||||||||||||
|
2" x 2 " |
|
||||||||||||||||||
|
3” X 3” FLANGED |
|
Rotary lobe pump use timing gears to eliminate contact between the rotors, which allows their use on non-lubricating fluids. These pumps offer low shear and gentle handling of the liquid to minimize product degradation. Rotary lobe pumps are useful for pumping and Transfer of all high viscous liquids like syrup paints, drugs, food products, etc.
Lobe pump is used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.
Features (Rotary Lobe Pumps) | |||||||||||||||||||
| |||||||||||||||||||
Working for Lobe Pump Lobe pump are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection.
| |||||||||||||||||||
Application (Rotary Lobe Pumps) | |||||||||||||||||||
|
PUMP Model | Port Size | Displacement @100 rpm |
|
LPM | US. GPM |
||
ALB 100S | 1" | 5 | 1.4 |
ALB 100L | 1" | 8 | 2.25 |
ALB 150S | 1 1/2" | 12 | 3.38 |
ALB 150L | 1 1/2" | 18 | 4.78 |
ALB 200S | 2" | 26 | 7.03 |
ALB 200L | 2" | 38 | 10.15 |
ALB 250S | 2 1/2" | 55 | 14.64 |
ALB 250L | 2 1/2" | 79 | 20.87 |
ALB 300S | 3" | 116 | 30.65 |
ALB 300L | 3" | 168 | 44.39 |
ALB 400S | 4" | 261 | 68.70 |
ALB 400L | 4" | 354 | 93.26 |
Fuel Pressuring internal gear Pump
Internal gear pumps are exceptionally versatile. While they are often used on thin liquids such as solvents and fuel oil, they excel at efficiently pumping thick liquids such as asphalt, chocolate, and adhesives. The useful viscosity range of an internal gear pump is from 1cPs to over 1, 000, 000cP.
In addition to their wide viscosity range, the pump has a wide temperature range as well, handling liquids up to 750F / 400C. This is due to the single point of end clearance (the distance between the ends of the rotor gear teeth and the head of the pump). This clearance is adjustable to accommodate high temperature, maximize efficiency for handling high viscosity liquids, and to accommodate for wear.
Features (Internal Gear Pumps) | |||||||||||||
| |||||||||||||
Application (Internal Gear Pumps) | |||||||||||||
|
|
|||||||||||||||||||||||
Useful for pumping and transfer of all viscous liquids, oils and petroleum products | |||||||||||||||||||||
ANI Engineers offers Helical Gear Pump, SG Series. It is available in cast iron grade with single helical alloy steel gears and hardened and ground shafts. It has sturdy design and construction to give long and trouble free life and performance. Ultra bronze bush material ensures smoother running than conventional phosphorous bronze. It is available in sizes ?" to 3", capacity range of 20 to 500 LPM and can operate upto a max pressure of 10 kg/cm2 and temperature up to 80?C. | |||||||||||||||||||||
|
Model | Inlet Outlet Size |
|
||||||||
SG 050 | 1/2" x 1/2" |
|
||||||||
SG 075 | 3/4" x 3/4" |
|
||||||||
SG 100 | 1" x 1" |
|
||||||||
SG 125 | 1 1/4" x 1 1/4" |
|
||||||||
SG 150 | 1 1/2" x 1 1/2" |
|
||||||||
SG 200 | 2" x 2" |
|
||||||||
SG 250 | 2 1/2" x 2 1/2" |
|
||||||||
SG 300 | 3" x 3" |
|
Useful for pumping and transfer of all viscous liquids, oils and Petroleum Products.
Features (Flanged Mounted Gear Pumps) | |||||||||
| |||||||||
Application (Flanged Mounted Gear Pumps) | |||||||||
|
Pump Model | Inlet Outlet (B.S.P.) |
|
||||||||||||||||||
|
1/4" x 1/4" |
|
||||||||||||||||||
|
1/2" x 1/2" |
|
||||||||||||||||||
|
3/4" x 3/4" |
|
||||||||||||||||||
|
1" x 1 " |
|
||||||||||||||||||
|
1 1/4" x 1 1/4" |
|
||||||||||||||||||
|
1 1/2" x 1 1/2" |
|
||||||||||||||||||
|
2" x 2 " |
|
||||||||||||||||||
|
2 1/2" x 2 1/2" |
|
||||||||||||||||||
|
3" x 3 " |
|