Angel Techno Polycoats

Kalbadevi, Mumbai, Maharashtra

Epoxy grout is a patented, high performance epoxy grout which offers excellent color uniformity, durability, stainprotection, and beautiful, full grout joints in an easy-to-use, non-sag formula.Angel hi-bond grout is designed for use on ceramic tile, glass tile and stone applications, both residential andcommercial. It can be used both interior and exterior on floors and walls. Ideal for re-grouting applications, hi-bondgrout is perfect for swimming pools, fountains and other wet area applications.Hi-bond industrial grout: hi-bond industrial epoxy grout is highly chemical resistant industrial gradeepoxy grout for: ceramics tile, pavers, floor brick, packing house tile and stone. Hi-bond industrial grout is suppliedas factory proportioned kits consisting of epoxy and hardener in jelly form.

Application:at 4023rd pge is light yellow liquid mono-epoxide compatible with modified and non-modified dgebaepoxy resins in all proportions etc.Typical propertiesviscosity hoppler 6 - 8 mpa.s. @ 25 cappearance visual light yellow, clear liquidepoxy value 5.9 - 6.3 eq. kg.refractive index 1.528 - 1.330 @ 25 cstorage stability up to 12 months in original container.Addition of reactive diluent to an epoxy resin imparts the following advantages:viscosity reduction without increasing volatiles.higher filler loadings, which in turns results in cost reduction. Secondary benefits of thehigher filler loadings, such as higher compressive strength, lower co-efficient ofexpansion; lower exotherm and lower shrinkage are also obtained.increased pot life of resin - hardener mixture without increasing total cure time.Method of incorporationthe required proportion of reactive diluent not exceeding 20 parts per hundred, is first added to theepoxy resin and mixed thoroughly to give a homogeneous mixture. Hardener is then added and remixed.The epoxy value of the diluents must be considered to calculate the correct proportion of hardenerrequired. For solid hardeners the mixture of epoxy resin and diluents is heated prior to the addition ofhardener as with conventional epoxy resins.

Elplast hsphigh range water-reducing pce based concrete admixturedescription:elcrete hsp is a high effective liquid super plasticizerfor the production of free flowing concrete or as asubstantial water-reducing agent for promoting highultimate and early strengths. Bleeding andsegregation tendencies of concrete are strikinglyreduced.It is also useful for modifying and improving severalproperties of fresh or hardened concrete.Uses:elcrete hsp is used as super plasticiser in theproduction of free flowing concrete for:all precast and rmc concrete.slabs and foundation.walls, column and piers.textured surface finisheshigh strength concreteshigh durability concretes (low wc ratio)high strength and durability precast & readymixproducts.Advantages:it reduces the water cement ratioconsiderably while maintaining theworkability.increased place ability in slendercomponents with packed reinforcements.decreases the amount of vibration.suitable for use in conjunction with standardplasticizers and retarders (synergized mixes)significantly reduces the risk of segregationhigh early strengths for precast or earlystrippinginsturctions fir use:calculate the gauging water, by 25% volumereduction depending on dosage.elcrete hsp is water soluble and is to beadded to the gauging water i.e. Water to bemixed in the concrete mortar.add 100 ml to 250 ml per 50 kg bag ofcement depending upon requirements ofslump or workability of concrete.it is desirable to have trial mixes to assessthe actual effect of the ingredients underfield conditions.

Application:anopoxy 250 epoxy resin is suitable for the formulation of solvent free coatings, floorings, screeds, trowellingcompound etc. When cured with polyamines, polyamidoamines or their adducts.Properties:general purpose, excellent mechanical properties and resistance to chemicals, which can be modified within widelimits by using various hardener and fillers.Typical propertiesappearance clear liquidcolour (gardner) 2 maxviscosity @ 25 c(cps) 9000-12000epoxy equivalent 185-190 (geq)density @ 25c (gmcm)3 1.15flash point (iso 2719) (c) _>200odour slightstorage and stabilityat least 24 months from the date of manufacture in the original sealed container at ambient temperature. Storeaway from heat and excessive humidity in tightly closed containers.Handling precautionsmay be harmful if ingested or absorbed through the skin and can cause sensitization. Will cause severe irritation incontact with eye and skin. Wash thoroughly after handling.Adequate ventilation is essential. Containers should be tightly closed when not in use or during transportation. Donot inhale mist or vapours. It is recommended to use gloves, safety glasses and protective clothing for safe handling.Declaimerall information contained herein is based on practical experience. Our technical representations whether verbal, written or by way of trials are given in good faith. Neither warranty nor guarantee is offered, given or implied, sincethe actual conditions prevailing at the time of using this product are outside the control of the company. While theinformation contained herein is believed to be reliable, angel techno polycoats makes no representationswhatsoever as to the product performance & or the result the user or buyer will attain. It is entirely buyers &users responsibility to carry our full scale testing.

(polyamide epoxy curing agent)discriptionthe condensation reaction between dimerized fatty acid or polymerized fatty acid and diamines is a simpletechnique used to make polyamides. This helps to overcome the volatility, irritation potential and critical loadingissues of conventional amines. Polyamides offer ambient cure, low toxicity, good strength and flexibility, and longpot life with great corrosion resistance. They impart high tensile and compression strength due to a highpercentage of hydrocarbon in their molecules. They give good adhesion to a wide variety of substrates and alsoexhibit superior blush resistance.Featuresexcellent resistance to mechanical impact.high flexural, compressice and tensile strengthgood electrical resistanceexcellent adhesion to a wide variety of materialslong working lifegood flexibilitywater resistancegood intercoat adhesionapplicationsadhesiveslaminates and castingcoatingstest reportsr. No. Property unit specification1 appearance visual pale yellow liquid2 colour gardner 10 max3 n.v.m % solvent free4 viscosity @25c mpas 2500-55005 curing temperature c . 246 ahew g eq. 135-190

Epoxy adhesivesbecause of their ability to adhere to a wide variety of materials, their high strength, their resistance to chemicals and environments, and their ability to resist creep under sustained load, epoxies are the most widely used structural adhesive. They are available in one component, heat curing and two component, room temperature curing systems. Unmodified epoxies cure to hard, brittle solids. Most adhesive formulations include modifiers to increase flexibility or toughness of the cured adhesive. This results in bond lines that are able to resist more peel and cleavage stress as well as impact.

Phenalkamine angomine - 5041lv is mannich base, a reaction product of distilled cashew nutshell liquid &polyamine. It is low viscosity curing agent for epoxy resins specially developed for concrete primers & potable watercontact.Featureslow viscosity.excellent rapid cure even at low temperature.good chemical, solvent & water resistance.very good compatibility withi. Epoxy resin based on bisphenol aii. Epoxy resin based on bisphenol fiii. Epoxy resin based on phenolic novolacsnon critical mixing ratio.excellent curing under humid as well as damp conditions.good adhesion to mechanically cleaned surfaces.superior corrosion resistance.very good flexibility.workable pot lives at lower temperature.Applicationsmedium to high solid coatings.flooring and construction.marine & industrial maintenance coatings.tank liningadhesivessurface tolerant primers for metallic substratestest reportsr. No. Property unit specification1 appearance visual reddish brown viscous liquid2 colour gardner 13 max3 n.v.m % solvent free4 amine value mg koh g 330-3805 viscosity @25c cps 1200-17006 density @25c . 0.9757 flash point (closed up) c f 104 2208 ahew g eq. 1109 recommended phr (liquidepoxy resin 190). 50-65curing propertiesformulationliquid epoxy resin (eew-190) 100g 100gangomine - 5041lv 50g 65goptimum curing schedule 7 days @25cgel time (100g @25c)mixing 40-45mins. 30-35mins.