Angel Techno Polycoats Mumbai, Maharashtra

Phenalkamine angomine - 5041lv is mannich base, a reaction product of distilled cashew nutshell liquid & polyamine. It is low viscosity curing agent for epoxy resins specially developed for concrete primers & potable water contact. Features  low viscosity.  excellent rapid cure even at low temperature.  good chemical, solvent & water resistance.  very good compatibility with i. Epoxy resin based on bisphenol a ii. Epoxy resin based on bisphenol f iii. Epoxy resin based on phenolic novolacs  non critical mixing ratio.  excellent curing under humid as well as damp conditions.  good adhesion to mechanically cleaned surfaces.  superior corrosion resistance.  very good flexibility.  workable pot lives at lower temperature. Applications  medium to high solid coatings.  flooring and construction.  marine & industrial maintenance coatings.  tank lining  adhesives  surface tolerant primers for metallic substrates test report sr. No. Property unit specification 1 appearance visual reddish brown viscous liquid 2 colour gardner 13 max 3 n.v.m % solvent free 4 amine value mg koh g 330-380 5 viscosity @25°c cps 1200-1700 6 density @25°c ...... 0.975 7 flash point (closed up) °c °f 104 220 8 ahew g eq. 110 9 recommended phr (liquid epoxy resin – 190) ......... 50-65 curing properties formulation liquid epoxy resin (eew-190) 100g 100g angomine - 5041lv 50g 65g optimum curing schedule 7 days @25c gel time (100g @25°c) mixing 40-45mins. 30-35mins.

Application: anopoxy 250 epoxy resin is suitable for the formulation of solvent – free coatings, floorings, screeds, trowelling compound etc. When cured with polyamines, polyamidoamines or their adducts. Properties: general purpose, excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardener and fillers. Typical properties appearance clear liquid colour (gardner) 2 max viscosity @ 25 􀀀c(cps) 9000-12000 epoxy equivalent 185-190 (geq) density @ 25􀀀􀀀c (gmcm)3 1.15 flash point (iso 2719) (􀀀c) _>200 odour slight storage and stability at least 24 months from the date of manufacture in the original sealed container at ambient temperature. Store away from heat and excessive humidity in tightly closed containers. Handling precautions may be harmful if ingested or absorbed through the skin and can cause sensitization. Will cause severe irritation in contact with eye and skin. Wash thoroughly after handling. Adequate ventilation is essential. Containers should be tightly closed when not in use or during transportation. Do not inhale mist or vapours. It is recommended to use gloves, safety glasses and protective clothing for safe handling. Declaimer all information contained herein is based on practical experience. Our technical representations whether verbal, written or by way of trials are given in good faith. Neither warranty nor guarantee is offered, given or implied, since the actual conditions prevailing at the time of using this product are outside the control of the company. While the information contained herein is believed to be reliable, angel techno polycoats makes no representations whatsoever as to the product performance & or the result the user or buyer will attain. It is entirely buyer’s & user’s responsibility to carry our full scale testing.

• MOQ 200 Kilogram
• Polyamide HardenerLight Yellow

(polyamide epoxy curing agent) discription the condensation reaction between dimerized fatty acid or polymerized fatty acid and diamines is a simple technique used to make polyamides. This helps to overcome the volatility, irritation potential and critical loading issues of conventional amines. Polyamides offer ambient cure, low toxicity, good strength and flexibility, and long pot life with great corrosion resistance. They impart high tensile and compression strength due to a high percentage of hydrocarbon in their molecules. They give good adhesion to a wide variety of substrates and also exhibit superior blush resistance. Features  excellent resistance to mechanical impact.  high flexural, compressice and tensile strength  good electrical resistance  excellent adhesion to a wide variety of materials  long working life  good flexibility  water resistance  good intercoat adhesion applications  adhesives  laminates and casting  coatings test report sr. No. Property unit specification 1 appearance visual pale yellow liquid 2 colour gardner 10 max 3 n.v.m % solvent free 4 viscosity @25°c mpas 2500-5500 5 curing temperature °c ...... 24 6 ahew g eq. 135-190

Application: at – 4023rd pge is light yellow liquid mono-epoxide compatible with modified and non-modified dgeba epoxy resins in all proportions etc. Typical properties  viscosity hoppler 6 - 8 mpa.s. @ 25 c  appearance visual light yellow, clear liquid  epoxy value 5.9 - 6.3 eq. kg.  refractive index 1.528 - 1.330 @ 25 c  storage stability up to 12 months in original container. Addition of reactive diluent to an epoxy resin imparts the following advantages:  viscosity reduction without increasing volatiles.  higher filler loadings, which in turns results in cost reduction. Secondary benefits of the higher filler loadings, such as higher compressive strength, lower co-efficient of expansion; lower exotherm and lower shrinkage are also obtained.  increased pot life of resin - hardener mixture without increasing total cure time. Method of incorporation the required proportion of reactive diluent not exceeding 20 parts per hundred, is first added to the epoxy resin and mixed thoroughly to give a homogeneous mixture. Hardener is then added and remixed. The epoxy value of the diluents must be considered to calculate the correct proportion of hardener required. For solid hardeners the mixture of epoxy resin and diluents is heated prior to the addition of hardener as with conventional epoxy resins.

Epoxy grout is a patented, high performance epoxy grout which offers excellent color uniformity, durability, stain protection, and beautiful, full grout joints in an easy-to-use, non-sag formula. Angel hi-bond grout is designed for use on ceramic tile, glass tile and stone applications, both residential and commercial. It can be used both interior and exterior on floors and walls. Ideal for re-grouting applications, hi-bond grout is perfect for swimming pools, fountains and other wet area applications. Hi-bond industrial grout: hi-bond industrial epoxy grout is highly chemical resistant industrial grade epoxy grout for: ceramics tile, pavers, floor brick, packing house tile and stone. Hi-bond industrial grout is supplied as factory proportioned kits consisting of epoxy and hardener in jelly form.

Epoxy adhesives because of their ability to adhere to a wide variety of materials, their high strength, their resistance to chemicals and environments, and their ability to resist creep under sustained load, epoxies are the most widely used structural adhesive. They are available in one component, heat curing and two component, room temperature curing systems. Unmodified epoxies cure to hard, brittle solids. Most adhesive formulations include modifiers to increase flexibility or toughness of the cured adhesive. This results in bond lines that are able to resist more peel and cleavage stress as well as impact.