Our Products
Insulators And Insulation Materials
2 Products availableFoam Sheets
2 Products availableMosquito And Insect Repellent
1 Products availableElectric Tape
1 Products availableEpoxy Coatings
1 Products availableWe offer the best product range of GOLD GALVANIZING SPRAY, Multipurpose Insect Killer, MDF Kit and epoxy steel.
ASMACOAT WP 900is a liquid applied, coal tar modified, single-component moisture-curing polyurethane coating. It is designed to form a seamless, elastomeric waterproofing membrane. When fully cured ASMACOAT WP 900 forms a permanently flexible waterproof lining to most building surfaces including reinforced concrete, block works, brick works, cement render, plaster board and fibre-reinforced cement. The properties like high elasticity, very good crack bridging and impermeability to water vapour make it capable of effectively waterproofing even in most demanding conditions.
Features:
Single component ready for use (no mixing required).
Excellent elasticity, allows expansion and contraction with the substrate, without cracking or becoming brittle.
Excellent chemical resistance.
High thermal stability which eliminates melting and flowing at high temperature.
Excellent workability.
Excellent adhesion to wide range of construction materials.
Provides a continuous, seamless waterproofing membrane.
Easy to repair.
Detail:
Asmaco Epoxy Steel is a two part ambient curing Epoxy adhesive suitable for general purpose applications and repair works of metal parts. This is a quick curing adhesive with a short pot life of 4minutes. Asmaco Epoxy Steel develops it's 70% of strength in one hour. The product is tough enough to take impact loads. The cure product can be machined using common machining operations.
KEY FEATURES
PVC pressure sensitive, flame proof electrical Insulation tape with a highly conformable backing, used for insulating, splicing and connecting bare wires for repair work, and general industrial maintenance.
FEATURES:
Curing system |
-- |
Moisture cure |
Tack Free time |
Minutes |
15 min (ca 23C/ RH > 50%) |
Cutting Time |
Minutes |
45-60 |
Complete curing |
Hours |
24 |
Foam color |
-- |
Light yellow |
Density |
Kg/m3 |
14-30 |
Closed Cells |
% |
60 – 70 % |
Adhesion Strength |
kPa |
PVC to PVC 143,Alumimum plates 133 |
Elongation at break |
% |
8 - 20 |
Shear Strength |
kPa |
22 - 50 |
Compression strength |
kPa |
35-100 at 10% compression |
Water absorption |
% |
0.03% volume |
Thermal conductivity |
35C W/(m.K) |
<0.050 |
Yield per 100 ml |
Liters |
6.0 |
Can temperature |
C |
Min.-15, Max.+35 |
Application temperature |
C |
+5 to +35 |
Temperature Resistance |
C |
-40 to +90 when cured |