Anasuya Scientifically Solutions

Hyderabad, Telangana

Sampling Booth has been designed to provide a Class 100 working environment at rest, with built-in scavenging system to ensure protection for the product, operator and surrounding environment.

The system comprises:

• Imported Minipleat HEPA Filter with hot melt technology, which conforms to EU 13 Grade, with an efficiency rating better than 99.99% for 0.3μ at supply position
• Imported Minipleat HEPA Filter with hot melt technology, which conforms to EU 13 Grade, with an efficiency rating better than 99.99% for 0.3μ at exhaust position
• Fabtech make prefilter which conforms to EU 4 Grade, with efficiency of 90% down to 10µ. These Filters are basically made from micro-fibre-glass media and are inherently washable
• Fabtech make Intermediate filter which conforms to EU 7 Grade, with efficiency of 95% down to 3µ. These Filters are basically made from micro-fibre-glass media and are inherently washable
• Motor Blower provided are statically and dynamically balanced, Supply of sufficient capacity and static pressure is used to take care of airflow requirement for entire life of HEPA. The blower is high-performance, noise abated, light weighted statically and dynamically balanced
• SS 304 Double Walled Side Panels
• Mechanical Differential Pressure Gauge (0mm-25mm: 2 Nos.) to monitor pressure drop across intermediate filter
• Photohelic Differential Pressure Gauge HEPA filter and (0mm-10mm: 1 No.) To monitor pressure drop across PRE Filter with respect to ambient
• Electrical control panel mounted on the side panel of the unit
• Tube Light
• ON/OFF Switches for motor
• 5/15 Amp single-phase switch socket for external equipment
• DOP Test port at upstream of HEPA filter

Many microbiological and cell culture laboratories require highly sterile working environment for performing research activities and laminar air flow cabinets are the best solution for them. Often called laminar air flow chambers or laminar air flow workstations, these laminar air flow cabinets are designed to keep contents of the work zone safe from particulates that are sensitive to such contamination.
A laminar air flow cabinet maintains a unidirectional flow of HEPA-filtered air over the work area and protects the working environment from dust and other air-born particulates. The flow can be horizontal (parallel to the work surface) or vertical (from top to the work surface). Both the air flow types have their own significance in research. The question, where to use horizontal air flow cabinet or vertical air flow cabinet, this choice solely depends upon the requirements of applications.

Features :

• HEPA filtration unit provides Class 100 air quality
• Optional UV lamp to sterilize work zone
• Low noise level
• High airflow capacity
• Meet US Federal Standard 209 B (BS 5295)
• Stainless steel work table
• Made from branded parts (blower etc.)
• Easy to change filters

We offer Class III Biosafety Cabinet for product, personnel & environment protection only. These offer air balancing of 100% exhaust with incineration & working zone under negative. The bio-safety Class III cabinets are designed for work with Microbiological agents assigned to bio-safety level 4. These cabinets provide maximum protection to the environment and the worker. The cabinet provides access for passage of materials inside through a double-door pass-through box, which can be decontaminated between uses. The supply and exhaust air is HEPA filtered. The exhaust air passes through the Two HEPA Filters, or a single HEPA filter and an air incinerator, before discharge to the outdoors. The airflow is maintained by a dedicated independent exhaust exterior, which keeps the cabinet under negative pressure. The cabinet has arm-length, heavy-duty rubber gloves attached in a gas-tight manner that ports in the cabinet and allows for manipulation of the materials isolated inside. Although the gloves restrict movement, they prevent the users from direct contact with the hazardous materials.

Features :

• Exhaust air is double-filtered through high-quality ULPA filters (per IEST-RP-CC-001.3) with typical efficiency of >99.999% for 0.1 to 0.3 micron particles, better than HEPA filters.
• Neoprene gauntlets are single piece leak-tested glove assemblies which guarantee maximum protection.
• Microprocessor-based Esco Sentinel™ Silver control system provides visual / audible alarms for airflow.
• Cabinet operates at negative pressure relative to the laboratory in order to prevent migration of pathogenic materials out of the work area.
• Exclusive dual exhaust filters provide >100, 000 times better protection than single-stage designs. An integrated pass-through with interlocking doors, permits materials transfer without risk of environmental contamination.
• ISOCIDE antimicrobial surface on all painted surfaces minimizes contamination.
• Magnehelic pressure gauge is mounted in the rear of the work zone for at-a-glance monitoring of work zone negative pressure.
• An angled cabinet front ensures an ergonomic working posture

We offer Class III Biosafety Cabinet for product, personnel & environment protection only. These offer air balancing of 100% exhaust with incineration & working zone under negative. The bio-safety Class III cabinets are designed for work with Microbiological agents assigned to bio-safety level 4. These cabinets provide maximum protection to the environment and the worker. The cabinet provides access for passage of materials inside through a double-door pass-through box, which can be decontaminated between uses. The supply and exhaust air is HEPA filtered. The exhaust air passes through the Two HEPA Filters, or a single HEPA filter and an air incinerator, before discharge to the outdoors. The airflow is maintained by a dedicated independent exhaust exterior, which keeps the cabinet under negative pressure. The cabinet has arm-length, heavy-duty rubber gloves attached in a gas-tight manner that ports in the cabinet and allows for manipulation of the materials isolated inside. Although the gloves restrict movement, they prevent the users from direct contact with the hazardous materials.

Features :

• Exhaust air is double-filtered through high-quality ULPA filters (per IEST-RP-CC-001.3) with typical efficiency of >99.999% for 0.1 to 0.3 micron particles, better than HEPA filters.
• Neoprene gauntlets are single piece leak-tested glove assemblies which guarantee maximum protection.
• Microprocessor-based Esco Sentinel™ Silver control system provides visual / audible alarms for airflow.
• Cabinet operates at negative pressure relative to the laboratory in order to prevent migration of pathogenic materials out of the work area.
• Exclusive dual exhaust filters provide >100, 000 times better protection than single-stage designs. An integrated pass-through with interlocking doors, permits materials transfer without risk of environmental contamination.
• ISOCIDE antimicrobial surface on all painted surfaces minimizes contamination.
• Magnehelic pressure gauge is mounted in the rear of the work zone for at-a-glance monitoring of work zone negative pressure.
• An angled cabinet front ensures an ergonomic working posture

Many microbiological and cell culture laboratories require highly sterile working environment for performing research activities and laminar air flow cabinets are the best solution for them. Often called laminar air flow chambers or laminar air flow workstations, these laminar air flow cabinets are designed to keep contents of the work zone safe from particulates that are sensitive to such contamination.
A laminar air flow cabinet maintains a unidirectional flow of HEPA-filtered air over the work area and protects the working environment from dust and other air-born particulates. The flow can be horizontal (parallel to the work surface) or vertical (from top to the work surface). Both the air flow types have their own significance in research. The question, where to use horizontal air flow cabinet or vertical air flow cabinet, this choice solely depends upon the requirements of applications.

Features :

• HEPA filtration unit provides Class 100 air quality
• Optional UV lamp to sterilize work zone
• Low noise level .
• High airflow capacity
• Meet US Federal Standard 209 B (BS 5295)
• Stainless steel work table
• Made from branded parts (blower etc.)
• Easy to change filters