Our Products
Garden Tools
2 Products availableSurface Finishing Machines
1 Products availablePliers
1 Products availableHammers, Pliers & Screwdrivers
1 Products availableCarbide Cutting Tools
1 Products availableHand Tool
1 Products availableOur Complete range of products are Straight Carving Gouges, Clamp Heads and Adjustable Iron Planes.
ANANT gouges are forged from special chrome vanadium alloy steel and heat treated under the strict supervision of qualified heat treatment experts ensuring their best performance. These are similar to chisels but with a curvature on the blade - they are the most frequently used carving tools. Used for grooving, or when turned over, for carving convexed shapes. They are available in various sizes and sweeps. The size of the sweep selected will vary with the amount of work the tool is required to use. Higher the number of the gouge, the greater the blade sweep or curvature. These are half rounded, finely polished inner surface, fitted with shock resistant polypropylene handles or seasoned hard wood handles. Blades are end protected with plastic caps. A top quality product for professional use. |
Materials |
Blades : High precision chrome vanadium alloy steelHandles : Shock resistant polypropylene plastic handle.Seasoned hard wood handles protected with plated steel shums. |
Finish |
Blades : Finely ground and lacquered polished, end protected with plastic capsHandles : Top quality plastic handles as die finish.Lacquered polish wooden handle. |
Packaging |
Individually packed in a blister or carbon box |
Art No. | Size of gouge in mm | Approx Weight in gms. |
A 271 | 6 | 120 |
A 272 | 8 | 125 |
A 273 | 10 | 140 |
A 274 | 12 | 150 |
A 275 | 14 | 160 |
A 276 | 16 | 170 |
A 277 | 18 | 180 |
A 278 | 19 | 185 |
A 279 | 20 | 190 |
A 280 | 22 | 200 |
A 281 | 25 | 215 |
A 282 | 28 | 230 |
A 283 | 30 | 250 |
A 284 | 32 | 270 |
ANANT wood turning tools are forged from special chrome vanadium alloy steel and heat treated under the strict supervision of qualified heat treatment experts ensuring their best performance. ANANT turning tools are of five basic typesNO.1 Diamond point tool (14mm width)NO.2 Round nose tool (14mm width)NO.3 Parting tools (14mm width)NO.4 Skew point tools (14mm width)NO.5 Gouge point tool (10mm width) Diamond points are used as scrapers for shaping and finishing. Round nose also used as scraper for shaping and finishing. Skew point used for finishing between centres only. Gouge point tool used mainly for roughing between centres & bowl turning These tools are used by the home craftsman, industrial professionals and the engineers. Tools are supplied with lacquered polished finish & fitted with ergonomically designed seasoned hard wood handles duly lacquered polished. |
Materials |
Blades : High precision chrome vanadium alloy steelHandles : Seasoned hard wood, front end covered by steel shum electro plated. |
Finish |
Blades : Precision ground lacquer polished.Handles : Lacquer polished seasoned hard wood. |
Packaging |
Supplied in 5pcs set in a display box |
Art No. | Type & Size of tool in mm | Approx Weight in gms. |
A 550 | NO.1 Diamond point tool (14mm) NO.2 Round nose tool (14mm) NO.3 Parting tools (14mm) NO.4 Skew point tools (14mm) NO.5 Gouge point tool (10mm) |
1125 gms |
ANANT carving tools are forged from special chrome vanadium alloy steel and heat treated under the strict supervision of qualified heat treatment experts ensuring their best performance. These tools are used by the home craftsman, industrial professionals and the engineers. Tools are supplied with lacquered polished finish & fitted with ergonomically designed seasoned hard wood handles duly lacquered polished. |
Materials |
Blades : High precision chrome vanadium alloy steelHandles : Seasoned hard wood, front end covered by steel shum electro plated. |
Finish |
Blades : Precision ground lacquer polished.Handles : Lacquer polished seasoned hard wood. |
Packaging |
Supplied in 6pcs set in a display box |
With a pair of ANANT Cramp Heads a bar cramp of any length can easily be made using a piece of timber 1 inch. (26mm) thick. Fitted with an improved working slide |
Materials :- |
Head and Slides : Best Quality Cast Iron. |
Handle and Screw : High Quality Steel |
Finish :- |
Stove enamelled ANANT Blue |
Tool No | For use with Boards-width | Approx. Weight | ||
AM 130 |
Inches | mm | Pounds | Kg |
1 | 26 | 2 1/2 | 1.13 |
ANANT strong bar sometimes called gorilla bar or wrecking bar is designed to the shape and size. Elliptical section is specially selected for the maximum strength of the product. Chisel end and claw end are scientifically heat treated to facilitate the smooth working on the job. Claw is shaped for easy removal of nails from the wood |
Shapes available in |
Octagonal section, Hexagonal section, Round section |
Materials |
Manufactured from selected carbon steel material. |
Finish |
Fully Powder coated, Claw end and chisel ends polished ground and lacquered |
|
|||||||||||||||||||
Wide Pattern trowel are designed for laying bricks for block, Rounded heel shape the blade so that the mortar is carried a little further forward on the blade & wider heel allows for even more mortar to be scooped on the blade. The impact area is made stronger to provide extra endurance, The handle rise is set for correct hang & balance. The blade is hardened & tempered to ensure durability. Wooden handle is attached for comfortable grip |
Materials |
Blade: High carbon spring steel |
Handle is made from selected hard wood & is also available in plastic |
Finishing |
blade is polished from the bottom & powder coated from top |
The handle is lacquer polished |
Brick Trowel No. |
Blade |
APPX. WT. GMS. |
A-501 A-502 A-503 |
4 1/2" 1 7/8" 8" 5 1/2" 11" 5 1/2" |
150 355 455 |
A Simple to use tool for Honing the plane irons Which can be set to Produce the correct cutting angle. The angle achieved by following the marker on the angle marking scale attached to the guide. The Plane iron is tightened on the top with the knurled screw.The free movement of tool is ensured by the steel, Which allow unrestricted movement over the entire oilstone surface.To make the extra use of the guide originally made exclusively honing the Plane iron of the carpenters Adjustable Iron Planes such as: Smoothing, Jack, fore and the jointer Planes, Attachment suitable for holding & honing the plane iron of the Spoke Shave Planes are introduced, as depicted above. |
Materials |
Body : Alloy Aluminum. |
Free Rollers : Best quality Steel. |
Finishing |
Roller & Knurled wheel : Chrome Plated |
Body & Angle Strip : Painted, ANANT Black |
Packing |
Individually cartoned in a display box of Six. |
Edge Honing Guide & Attachment No. |
Width of Grip Iron in mm |
APPX. WT. GMS. |
A-50 (for 45mm to 60 mm) A-51 (for spokeshave cutter) A-051 (for spokeshave cutter) |
45 to 60 54 45 |
55 100 55 |
A Simple tool for Honing the plane irons of different model of the carpenters irons bench plates such as jack Planes, Block Planes, Plough Planes, Spokeshaves, Chesils & the mortise of the width ranging from 3mm to 65mm.The Plane irons & other cutting tools are gripped from both the sides between the two simultaneously moveable and reversible jaws of the guide and tightened on the top by the knurled screw clamp to strongly hold the tool in its position while honing.The knurled screw clamp can be use in two positions (forward & backward) provided in the guide.The simultaneously moveable (outward & inward ) jaws of the guide are operated by rotating (clockwise & anti clockwise) The knurled screw head of the left & right hand thread screw , underneath the guide.The honing guide is free moveable on the steel rollers made of good quality steel.The correct honing angle is 30 degree & the sharpening angle is 25 degree of the cutting tool is achieved by shifting the roller at the rear end of the guide of its respective position of 30 degree & 25 degree marked on the guide. |
Materials |
Body : Alloy Aluminum. |
Free Rollers : Best quality Steel. |
Finishing |
Roller & Knurled wheel : Chrome Plated |
Body & Angle Strip : Painted , ANANT Black |
Multi Edge Honing Guide No. |
Width of Grip in mm |
APPX. WT. GMS. |
A-60 | 3 to 65 | 550 |
Plastic Trowel is so designed for guarantee to stay flat use after use & can withstand pressure of hard trowling. The flat blade makes applications easier for a more consistent finish. The blade is properly shaped & tempered. The special hard wood handle is fitted for a comfortable grip. |
Materials |
Blade: High carbon spring steel |
Handle is made from selected hard wood & is also available in plastic |
Finishing |
blade is polished from the bottom & powder coated from top |
The handle is lacquer polished |
Plastering Trowel No. |
Blade |
APPX. WT. GMS. |
A-451 | 13" 5" | 500 |