Our Products
Body Fillers
1 Products availablePrimer Paint
1 Products availablePaints
1 Products availableNatural And Synthetic Resin
1 Products availablePaints, Varnishes & Wall Putty
1 Products availableEpoxy Coatings
1 Products availableWe offer the best product range of Petrochemicals.
Anand's Top shine Classicis water based acrylic emulsion polymer based smooth finish, highly decorative paint for home interior application. Wide ranges of nontoxic, coloured pigments makes Top shine Classic very attractive over interior walls. World class additives composition provides smooth, fine & leveled finish. It is an economical version of acrylic emulsion paint.
Benefits & Uses
Wide ranges of attractive colour shades are available
Smooth finish
Washable - dirt can easily cleaned by soap water
Eco-friendly water based
Non - Toxic
Economical interior finish
Adheres/bonds strongly to cementations plastered surface
Excellent hiding & covering capacity.
Usage :
Interior walls of any building structure.
Surface preparation of top shine classic acrylic distemper remove old paint by scraping it with putty. Wipe out dust by paint brush or clean cloth. Apply one coat of Anaseal - WT cement primer and allow it to dry for 5-6 hours. Use acrylic wall putty or synthetic wall putty to fill undulations of the surface in thin coats and allow it to dry for 4-6 hours. Wipe out dust by clean cloth. Apply another coat of Anseal-WT cement primer & allow it to dry for 5-6 hours. Sand the surface with fine 320 numbers every paper clean dust.
Mixing of rang - e bahar & Applications:
Thoroughly mix the contents of containers to a homogenous shade. Add water slowly and mix to a uniform free flowing lumps free liquid. Apply 2-3 coats of diluted paint by good quality brush with an interval of 3-4 hours.
Packing:
5, 10, 20 kg plastic bucket.
Technical Charactristic
|
Appearance |
: |
Homogenous, uniform, soft and smooth viscous paste. |
| Anand's top seal sealer is an ultimate products to be used on wood surfaces to protect the changes form humidity. the product is so finely formulated that it offers an excellent finishing by filling up pores that left uncovered during filling operations. It is easier to use and having better binding strength than conveention method of Lakhdana and Chapadi. Direction for uses
|
Technical Data
|
Area of application Ancillary’s recommended
Thinner recommended Thinner intake Coverage Finish Flash Point |
: : :
: : : : :
|
Wood Fillers by Muslin Cloth Spraying for 25-30 seconds by ford cup B4 at 30°c Spraying NCT-24 20 to 25 % by volume 8-10 sq.mtrs/ltr./coat by spraying a 25 micron Smooth Above 14 °c |
Anand Top Seal melamine is a premium melaminized coating it is specially formulated as a protective and decorative clear finishing for wood excellent resistance to oil, food, and beverages.
It is available in tree finishes:
|
Area of application Ancillary’s recommended Method of application
Thinner recommended
Thinner intake Coverage
Finish
Flash Point Packes Avilable |
: : :
:
: :
:
: : |
Wood Fillers Brushing for 20-30 Sec. by ford cup B4 at 30°c sraying for 20-30 Sec. by ford cup B4 at 30°c Brushing T - 06 spraying T - 24 20 to 25 % by volume 8-10 sq. mtrs /ltr. /coat by spraying at 25 micron thickness at a pressure of 34 - 40 p.s.i. Smooth & Glossy (for melamine Glossy) Smooth 7 Matt (for melamine Matt) Above 14 °c 200 ml, 1/2 ltr, 1 ltr, 4 ltr, 20 ltr. |
Anand Top Wood (P.U. Clear) give as ideal finish for differe wood surfaces old or new. It is resistant to moisture and highly durable. it offers great resistance to heat, water stains and scratches. It is best suited for interior applications.
A. For pre polished surfaces-
i. Sand the surface, along the grains.
ii. Clean the surface.
iii. To the surface free of dust and grease, apply a coat of to Wood either with brush, muslin cloth or spray gun.
iv. Allow it to dry for 4-6 hrs. and then sand with emery paper 320 No.
v. Apply second coat of Top wood.
B. For new wood surfaces-
i. Carry out pre-prepration using fillers, if desired stains. Anand's Top Seal Sealer.
ii. Then follow the same procedure as for the pre polished surface.
|
Area of application Ancillary’s recommended
Method of application
Thinner recommended
Thinner intake Coverage Finish Flash Point Packes Avilable |
: :
:
:
: : : : : |
Wood Fillers/Stains Sealer - Anand's top seal sanding sealer Brushing for 45 Sec. by ford cup B4 at 30°c Spraying for 20-3- Sec. by ford cup B4 at 30°c Anand's Reliable (MTO) 20 to 25% by volume 8-10 sq. mtrs /ltr. /coat by Brushing Smooth & Glossy Above 30°c 200 ml, 1/2 ltr, 1 ltr, 4 ltr, 20 ltrs. |
ANA ageing not Allowed, clarify the meaning of product that is exterior weather durable coating. ANA ia an acrylic emulsion paint based on best quality elastic acrylic emulsion, imported titanium dioxide pigment, light fast and weather resistant coloured pigments, multi functional additives, ultra fine properly selected filler and water as a solvent ANA is composed of world best film preservatives, which protect the dry film of coating from fungus, algae and moss. Durability of ANA is evaluated for 2 to 3 years provided it is applied as per company's application instructions.
|
Appearance |
: |
Homogenous, uniform, lumpsfree soft and smooth paste. |
Anand's Top shine Classicis water based acrylic emulsion polymer based smooth finish, highly decorative paint for home interior application. Wide ranges of nontoxic, coloured pigments makes Top shine Classic very attractive over interior walls. World class additives composition provides smooth, fine & leveled finish. It is an economical version of acrylic emulsion paint.
|
Appearance |
: |
Homogenous, uniform, soft and smooth viscous paste. |
Govind Pura, Bhopal, Madhya Pradesh 