Anand Engineers Pvt. Ltd.

Andheri East, Mumbai, Maharashtra

Industrial cleaners/degreasers have been specifically formulated by a carefully chosen blend of safe organic solvents especially designed to remove heavy grease, oils and dirt quickly and safely.

They are mainly used to degrease and clean automotive parts, oilfield equipment, machined parts, industrial machinery and other difficult-to-clean surfaces.

These products are environmentally stable biodegradable, nontoxic and safe on ferrous and non-ferrous metals and most plastics. Free from CFC's, they are extremely environment friendly products.

Anti-Seizes are high quality lubricants that are usually supplied in the form of a paste.

They contain a number of solid lubricants including Molybdenum Di-sulfide, graphite, metal hydroxides, metal phosphates, inorganic oxides as well as metals such as copper, tin & zinc. They are specifically formulated for easy application and high adhesion.

All metal surfaces are covered by their oxides in order to protect them from seizure and wear during sliding and rolling operations. In case the oxide layer is damaged during sliding or the oxide layer is extremely thin like that for stainless steel the danger of seizure is very high. In order to protect these metal surfaces, they are coated with solid lubricants.

The film has very good adhesion to the metal substrate and very good film strength. Such a film prevents metal to metal contact and thereby prevent wear and seizure.

Our line of evaporative oils has created industry benchmarks in quality for a variety of specialty applications.
These superior line of fluids include evaporative lubricants, a low viscosity, low odor and solvent based neat stamping & punching oil, which is suitable for operation of sheet metals, such as aluminum alloy, stainless steel, zinc-coated steel, etc.
Molygraphss PUNCH &Smoothform line of products are developed to optimize tool life, part quality, and cost efficiency. Suitable for moderate to relatively severe metalworking operations, such as stamping, punching, tapping, shallow drawing, light press work, roll forming etc.

These are basically solid lubricant dispersions either in oil or water.

They are mainly used in hot/cold forging applications. They are formulated using specially lubricity and EP additives to promote metal flow. Graphite as a solid lubricant works very well at extreme temperatures.

Forging lubricants increase die life, provide good release and give a good surface finish to the components being forged.

Forging lubricants can be used in the forging of Crankshafts, axles, bevel gears and many other automotive components.

A line of corrosion preventives have been specially designed to consistently protect bare metal surfaces of machinery, tools and components.
These state-of-the-art line of corrosion preventive products are the result of intensive research and development, with the cooperation of major manufacturers in the automotive, steel and roller bearing industries.
Rust preventive oils are easy to apply and easy to remove, are non-toxic and ecologically friendly. The wide range of formulations are suitable for a variety of materials and applications.
They are compatible with most pre and post application operations. These products do not contain any hazardous substances like nitrites, aromatic amines and heavy metals.

Thread Dope compound is lubricant, thread sealing compound, and an anaerobic chemical sealant that is used to make a pipe thread joint leak proof and pressure tight.
Although common pipe threads are tapered and therefore will achieve a proper fit during proper assembly, machining and finishing variances usually result in a fit that does not result in 100 percent contact between the mating components. The application of thread dope prior to assembly will fill the minute voids between the threads, thus making the joint pressure tight.
Thread dope also acts as a lubricant and helps prevent seizing of the mating parts, which can later cause difficulty during disassembly.
Various types of thread dope formulations exist. The appropriate type being determined by the application, e.g., pneumatic, hydraulic, caustic, etc. Improper selection of the type of thread dope may result in leakage despite best assembly practices.
Petroleum-based thread dope is not intended for use on threaded PVC, CPVC or ABS pipe and fittings since it will deteriorate the plastic.

Molygraphs range of silicone oils and compounds are offered as silicone greases, Silicone compounds and Silicone Oils.
Silicone greases are normally used where there is a wide band in temperature range.
They operate optimally in temperature ranges of -73 to 180 degree Celsius. Ideal for cold start equipments.
Silicone compounds are products usually thickened with fumed silica. They act as water resistant sealants in high vacuum environments, protective coatings on high voltage overhead line insulators and as mold releases for rubber and plastic parts.
Silicone Oils essentially have similar characteristics to silicone greases and compounds. They are usually used as heat transfer mediums, and as a damping and hydraulic fluid in special applications.

Molygraphs Smooth form and Smooth press line of metalforming oils are highly lubricious oils fortified with anti-wear/EP additives for deep drawing applications.

The most critical aspect of these oils is the high degree of boundary lubrication achieved by their use.

As deep drawing applications typically involve high stresses and loads it becomes imperative to use high quality lubrication to get desired results.

The main applications of these oils is in sheet metal drawing. Fuel tanks, automotive door assemblies, cylinder components etc , require the use of forming oils to eliminate cracks and other defects.