features

8 in 1 Encoder/Modulator is an all-in-one device integrated encoding multiplexing and modulation functions in one standard 1U case. It can convert 8 CVBS signals and 1 ASI input to DVB-C/T RF out in the frequency range of 30960MHz. It is also equipped with 2 ASI ports and IP port to output TS in MPTS or SPTS.

The signals source could be from satellite receivers, closed-circuit television cameras and etc. its output signal is to be received by DVB-C/T standard TVs or DVB-C/T STBs.

The device can be used in public place such as metro, market hall, theatre, hotels, resorts, etc for advertising. It also can be used for monitoring, training and educating in company, schools, campuses, hospital.

SHARP VISION EL 2081 MPEG-2super encoder supports 8 AV (8 CVBS and 8 unbalanced analog stereo audio) and 1 ASI input, after multiplexing process, it gives ASI and IP output at the same time. Users can manage the device through the NMS. Besides, it supports MPEG-2 video encoding, and the audio encoding supports MPEG1-LAYER 2, MPEG2-AAC and AC3. In conclusion, its high compatibility and integrated design make this device widely used in a variety of digital TV broadcasting systems.

• Supports MPEG-2 video format, and advanced video pre-treatment
• Support MPEG-1 Layer2, MPEG2-AAC and AC3 audio format
• 8 CVBS video input, 8 pairs of unbalance stereo audio input
• Multiplex 1 ASI input
• Supports PAL, NTSC SD signal
• Support D1, HD1, 2/3D1, 3/4D1 resolution
• Supports IP output, 1xMPTS & 8xSPTS output over UDP
• Keyboard and LCD operation
• Support SNMP/NMS management

ThisQAM 081IP Mux-Scrambling and modulation module has adopted slot structure to allow maximum 3 QAM 024 cards to insert one device simultaneously. To draw a conclusion, its excellent integrated level, powerful performance and low cost make it adequate for the new generation CATV system.

• 1 GE input, RJ45interface or SFP
• Supports up to 256 channels TS over UDP/RTP, MPTS or SPTS input
• Supports unicast and multicast, supports IGMP v2v3
• Max 840Mbps for all input
• Supports re-multiplexing and MPTS/SPTS multiplexing
• Supports accurate PCR adjusting
• Supports PID filtering, remapping and PSI/SI editing
• Supports up to 180 PIDS remapping per channel
• Support DVB general scrambling system(ETR289), simulcrypt standards ETSI 101 197 and ETSI 103 197
• Support multiplexed or scrambled TS over UDP/RTP output
• 8 adjacent QAM carriers output, compliant to DVB-C (EN 300 429) and ITU-T J.83 A/B/C
• Supports symbol rate 5.09.0Msps, 1Ksps stepping
• Supports constellation: 16QAM/32QAM/64QAM/128QAM/256QAM
• Supports RS(204, 188) encoding
• RF output frequency range: 30860Mhz, 1Khz stepping
• RF output level: -160dbm(per QAM carrier), 0.5db stepping
• Excellent RF performance, MER40db
• Support NMS/SNMP
• Modular design, 1U chassis support 3 modules , 4U chassis support 12 modules

Sharp VisionIRD 081is a head-end interface conversion device which is used for DVB and Ethernet. It is integrated with tuner demodulation and gateway function, which can demodulate the signal from 8 tuners into TS and packet the TS into IP package, then output the IP package through different IP address and ports. It supports TS over UDP protocol. Furthermore, it can simultaneously convert the signals from 8 channels ASI to TS over UDP and output it.

• Fully complying with ISO13818 and EN300 468 standard
• Integrated demodulating and multiplexing functions
• 8 Tuners (DVB-C/DVB-S/DVB-S2 /DVB-T/T2/ISDB-T/ATSC Optional) input
• 2 channels TS input for re-multiplexing
• SPTS and MPTS code stream multiplexing
• Support accurate PCR adjusting
• Support PID filtering, re-mapping
• Two groups (each group has 2 channels)separate TS outputs
• Support TS over UDP output as mirror of ASI output (RJ45), GE Port
• Support PSI/SI rebuilding and editing
• Huge buffer memory for saving the overflowing code stream
• Supporting to multiplex one program to all outputs
• Alarming function
• Network long-distance upgraded
• With high reliability design and stability operation
• LCD/keyboard and net management, support NMS/SNMP

8 in 1 Encoder/Modulator is an all-in-one device integrated encoding multiplexing and modulation functions in one standard 1U case. It can convert 8 CVBS signals and 1 ASI input to DVB-C/T RF out in the frequency range of 30960MHz. It is also equipped with 2 ASI ports and IP port to output TS in MPTS or SPTS.

The signals source could be from satellite receivers, closed-circuit television cameras and etc. its output signal is to be received by DVB-C/T standard TVs or DVB-C/T STBs.

The device can be used in public place such as metro, market hall, theatre, hotels, resorts, etc for advertising. It also can be used for monitoring, training and educating in company, schools, campuses, hospital.

With pre-integrated middleware, the solution is ready to provide you with returns from the initial phase of Set top box seeding. Very sensitive to signal and can accept very low level signal as well.

H.264 (MPEG4) / MPEG2, SD DVB-C compliantMore than 800 channels TV & Radio programmableUSB 2.0 port with PVR Ready & Time ShiftEPG & DVB Teletext & DVB subtitlesAuto search & Network searchFavourite, Add, Delete channelsParental lockUser friendly interfaceSoftware upgrade through USB & OTALast Channel Recall

Main Chipset: MSTARCPU: 450 DMIPSFlash Memory: 8 MByteDDR Memory: 64 MbyteDemodulator IC : Main Chip EmbeddedTuner Type : DVB-CFrequency Range : 48 860MHzInput Impedance : 75Input Level Range : 4080dBuV(64QAM), 4085dBuV(256QAM)Standard followed : (EN300429), Annex A/CChannel Bandwidth: 8 MHzDemodulation : 16QAM, 32QAM, 64QAM, 128QAM, 256QAMSymbol RateSupport : 0.77 MbaudStandard followed : ISO/IEC 13818-1Video Decode : MPEG2/H.264 ISO/IEC 13818-2MP@HL/MLAspect Ratio : 4:3, 16:9Video Resolution : 720576(PAL) 720480(NTSC)Audio Decode : MPEG-1 L1, L2 and MPEG-2 AudioSound Mode : Left, Right, StereoSampling Frequency : 32KHz, 44.1KHz, 48.96KHzInput Voltage: External Adapter; 100270V, 50/60Hz Input, DC 12V/1A output toSTBConsumption : Max 8WTemperature : -20C50CHumidity: