Delhi, India
Our Products
Sharp VisionAS 1515 / AS 1616 areAluminium Housing Trunk Line amplifiersused in Trunk and branch lines specially designed to serve the needs of CATVwith very long trunk cables. They are in Aluminium housing providing maximum heat dissipation and are yet economical. They incorporate Superior Quality Hybrid IC Module to obtain excellent features.
FEATURES
- Good level flatness- Mains cum Power Pass- PP voltage selection LED- 106 Ch. loading capacity- 30dB Gain (40 dB Optional)- High voltage surge protection- Adjustable gain: 0 20 dB- Output level: 105 dBV- Slope control: 20 dB variable- Flatness:+0.75dB- Return loss: > 14dB- Noise figure: < 7 dB
MODELS
AS 1212Amplifiers are used as Line Extender / Branch Amplifiers depending on cable system's requirements. These FET amplifiers incorporate the recent innovation of FET which makes the amplifiers Ultra Low Noise. FET Amplifiers are more suitable than Hybrid amplifiers when RG59 / RG6 cables are incorporated due to its features of high gain and high slope.
FEATURES
- Double output
- More than a hybrid
- 23 dB linear slope
- Mains cum power pass
- Flat frequency response
- FET stages for ultra low noise
- Aluminium housing for longer life
- High gain of 43 dB (30 dB optional)
- Voltage selection LED for easy selection
If 1310 Fiber signal drops down to ve level, we can install FTFA to increase the signal level to 13 dBm/14 dBm, so that the fiber can be extended further without compromising on signal quality.
FEATURES
Low NoiseAluminium Housing Pre Amplifier AS 1520is designed for control rooms having more channels to compensate the losses due to more than one combiner in series. In this Pre Amplifier, the loss compensation is achieved with high C/N (CSO and CTB with -61dBc).
FEATURES
- Plug-in slope card
- Flatness: 0.2dB
- Noise figure: < 6.5dB
- Return loss: >14dB
- Output level : 100dBV
- Slope (Fixed): Standard 0 dB
- Power pass: 30 / 40 / 50 / 60 VAC
- Accepts high RF Input signal level
- Good C/N, CSO, CTB characteristics
- Mains voltage: 220VAC+10%, 50 Hz
- Freq.: 40 860 MHz (106 Ch. loading capacity)
- Low noise pre amplifier for control room application
AS1111 / AS 1010 & SHAKTIarePowder Coated Trunk Linehybrid amplifiersused in Trunk and branch lines specially designed to serve the needs of CATVsystems with long trunk cables. They incorporate good quality hybrid IC module to obtain better features.
FEATURES
- Double output- Good level flatness- Mains cum powerpass- Powder coated housing- PP voltage selection LED- Separate IN & OUT fuses- 106 Ch. Loading capacity- 30 dB gain (40 dB optional)- High voltage surge protection- Output level: 103dBV- Slope control: 20dB variable
- Flatness :+0.75dB
DC Powered Hybrid Amplifiers are specially designed for un-interrupted signal from Cable network to subscriber. AS 311 runs on DC Supply (40V SMPS) and receives power from multiple power sources in the line. All Aluminum Housing providing maximum heat dissipation and have RFI Shielding. Superior quality Hybrid IC Module to obtain excellent picture, sound quality & Digital Ready. DC Amplifiers are power failure safe as they get supply from multiple sources.
FEATURES
-Frequency Range: 40 900 MHz- Multiple DC Power Options- DC Power Pass- Output Level: 102 dBV- Low Power Consumption- Optimum for Trunk Distribution- Superior Quality Hybrid IC Module- Hybrid IC Protected- Maintain BER/MER
