A New Product withLife Time Warranty against all kinds of insect attack.This is Zero Gap Plywood with thicker face and higher percentage of Glue Line Poisoning. The structure stability is further assured byuse of Unisex imported Timberand long panels and wider Cores.Together with Life Time Warranty, the company also undertakes to either replace or to compensate up to twice the value, in case of any unlikely event of insect infestation.

It is our high end product having lifetime warranty. USP of this product are as under:

1> 0.50mm+ Gurjan Face.
2> All layers of Homogenous Timber.
3> 3 times Glue Line Protection
4> Almost no gap material.
5> Double CCB (Copper Chrome Boron) Treatment
6> 200% lifetime Warranty *^(T&C)

Fire Retardant is a non-leachable plywood.It is not just Fire-Retardant but it also resists fungi, insects and more importantly pin-hole borers.Selected hardwood panels and wooden planks undergo vacuum-pressure-impregnation (as per IS:5509 specification) that results in a special chemical composition which helps in forming a protective char, in the unfortunate event of a fire. Plywood is an organic material; it cannot be absolutely fire proof. However, Fire Retardant resists immediate ignition or burning, surface spread of flames and flame penetration.

Amul Fire Retardant Ply & Door are available in thickness ranges from 4mm to 35mm with standard size sheet such as 8' x 4'/

It is our special product having Fire Retardant properties. The USP of this product are as under:
1> All Gurjan or equiv. H/W core2> All layers treated in Mono Ammonia Phosphate for 72 hours.3> Before and after two stage treatment4> Price is normally 28-30% more than IS:7105> Rating- As per available rating our 12mm FR Ply is rated for 73 minutes as against BIS requirement of 30 minutes.
There are 3 major tests for FRP-A: Flammability testB: Flame Penetration testC: Rate of Burning testWe proudly announce that Amul is the first Company in Gandhidham to have this license.

Amul marine Plywood is specially treated plywood that is designed to resist rotting in a high-moisture environment. Marine plywood is frequently used in the construction of docks, boats and other marine vessels. It is manufactured with utmost care in the supervision of technical experts with Gurjan Core and face veneers. These are bonded with Phenol Formaldehyde BWP grade resin under high temperature and pressure. Further, the finished plywood is subjected to proper preservative treatment under vaccum pressure to ensure protection agaist insects, borer, termite and fungi.

MR Grade Plywood is moisture and cold water resistant. It is mainly made from selected imported GURJAN hardwood duly fortified with melamine, a chemical which enhances the water resisting qualities. Melamine fortified MR Grade Plywood is a superior product for a vast range of items including house hold furniture, partitions and Value Added high quality commercial wood-working. BWR grade plywood is made from selected imported GURJAN hardwood and is Phenol Formaldehyde (PH) bonded, which makes it boiling water resistant.
This is our flagship brand of Plywood Division. Amul Gold plywood are made of Gurjan and Equivalent H/W cores and Gurjan Face. This product is suitable for internal and external application and all kind of furniture use.

We obtain a good quality veneer from the log of teak, and use it only as the topmost surface layer of the plywood. The inside layers of the plywood are made using other woods. Teak wood is a strong and attractive material that has been in fashion for a long long time. It has a rich golden brown colour and striking straight grain patterns on it that make it look very beautiful. It is also very strong and durable, and has a natural oil within its cells because of which it has natural resistance against termites and pests.

At present we are selling about 3000 Teak ply every month. Targeted Sale is 5000 in a month. USP of this product are as under:
1> 100% Burma Teak, sourced from leading manufacturer.2> 100% Gurjan, imported, gapless Baseply of higher thickness.3> Available in group size of 15 to 504> Also available in Horizontal, Mix-match and crown/knotty, rough cut.5> On the line of increasing decorative range, recently we have started Sapele also.6> Can proudly claim to be complaint free product since we have started.

A perfect product for the creative modules! In the manufacturing of modern furniture, flexible plywood can give shape to new concepts, which would bring changes in the wooden component market. Concepts of those engaged in structural and architectural work may also change. Flexible plywood gives the users simplicity with combined effect of durablity and strength. Amul flexi ply can be rolled and bent Into any shape without cracking or de-lamination.

We have developed 1mm Fexible Plywood with Both Side Commercial Face as well as with One Side Teak Face. The exclusiveness of the product is that it can be bent along the grains, across the grains, forward, backward and also diagonally. This speciality put the product to more varied uses compared to traditional Flexible Plywood and 4mm OST.

4mm OSTThrough market is flooded with different types of decorative veneers of various ranges, but we have started production of high quality National Burma Teak Face pasted on 4mm imported panels for long lasting and protection from handling damage, we are providing Shrink Filming on teak face side.

A New Product withLife Time Warranty against all kinds of insect attack.This is Zero Gap Plywood with thicker face and higher percentage of Glue Line Poisoning. The structure stability is further assured byuse of Unisex imported Timberand long panels and wider Cores.Together with Life Time Warranty, the company also undertakes to either replace or to compensate up to twice the value, in case of any unlikely event of insect infestation.

It is our high end product having lifetime warranty. USP of this product are as under:

1> 0.50mm+ Gurjan Face.
2> All layers of Homogenous Timber.
3> 3 times Glue Line Protection
4> Almost no gap material.
5> Double CCB (Copper Chrome Boron) Treatment
6> 200% lifetime Warranty *^(T&C)

Fire Retardant is a non-leachable plywood.It is not just Fire-Retardant but it also resists fungi, insects and more importantly pin-hole borers.Selected hardwood panels and wooden planks undergo vacuum-pressure-impregnation (as per IS:5509 specification) that results in a special chemical composition which helps in forming a protective char, in the unfortunate event of a fire. Plywood is an organic material; it cannot be absolutely fire proof. However, Fire Retardant resists immediate ignition or burning, surface spread of flames and flame penetration.

Amul Fire Retardant Ply & Door are available in thickness ranges from 4mm to 35mm with standard size sheet such as 8' x 4'/

It is our special product having Fire Retardant properties. The USP of this product are as under:
1> All Gurjan or equiv. H/W core2> All layers treated in Mono Ammonia Phosphate for 72 hours.3> Before and after two stage treatment4> Price is normally 28-30% more than IS:7105> Rating- As per available rating our 12mm FR Ply is rated for 73 minutes as against BIS requirement of 30 minutes.
There are 3 major tests for FRP-A: Flammability testB: Flame Penetration testC: Rate of Burning testWe proudly announce that Amul is the first Company in Gandhidham to have this license.

Amul marine Plywood is specially treated plywood that is designed to resist rotting in a high-moisture environment. Marine plywood is frequently used in the construction of docks, boats and other marine vessels. It is manufactured with utmost care in the supervision of technical experts with Gurjan Core and face veneers. These are bonded with Phenol Formaldehyde BWP grade resin under high temperature and pressure. Further, the finished plywood is subjected to proper preservative treatment under vaccum pressure to ensure protection agaist insects, borer, termite and fungi.

MR Grade Plywood is moisture and cold water resistant. It is mainly made from selected imported GURJAN hardwood duly fortified with melamine, a chemical which enhances the water resisting qualities. Melamine fortified MR Grade Plywood is a superior product for a vast range of items including house hold furniture, partitions and Value Added high quality commercial wood-working. BWR grade plywood is made from selected imported GURJAN hardwood and is Phenol Formaldehyde (PH) bonded, which makes it boiling water resistant.
This is our flagship brand of Plywood Division. Amul Gold plywood are made of Gurjan and Equivalent H/W cores and Gurjan Face. This product is suitable for internal and external application and all kind of furniture use.

We obtain a good quality veneer from the log of teak, and use it only as the topmost surface layer of the plywood. The inside layers of the plywood are made using other woods. Teak wood is a strong and attractive material that has been in fashion for a long long time. It has a rich golden brown colour and striking straight grain patterns on it that make it look very beautiful. It is also very strong and durable, and has a natural oil within its cells because of which it has natural resistance against termites and pests.

At present we are selling about 3000 Teak ply every month. Targeted Sale is 5000 in a month. USP of this product are as under:
1> 100% Burma Teak, sourced from leading manufacturer.2> 100% Gurjan, imported, gapless Baseply of higher thickness.3> Available in group size of 15 to 504> Also available in Horizontal, Mix-match and crown/knotty, rough cut.5> On the line of increasing decorative range, recently we have started Sapele also.6> Can proudly claim to be complaint free product since we have started.

A perfect product for the creative modules! In the manufacturing of modern furniture, flexible plywood can give shape to new concepts, which would bring changes in the wooden component market. Concepts of those engaged in structural and architectural work may also change. Flexible plywood gives the users simplicity with combined effect of durablity and strength. Amul flexi ply can be rolled and bent Into any shape without cracking or de-lamination.

We have developed 1mm Fexible Plywood with Both Side Commercial Face as well as with One Side Teak Face. The exclusiveness of the product is that it can be bent along the grains, across the grains, forward, backward and also diagonally. This speciality put the product to more varied uses compared to traditional Flexible Plywood and 4mm OST.

4mm OSTThrough market is flooded with different types of decorative veneers of various ranges, but we have started production of high quality National Burma Teak Face pasted on 4mm imported panels for long lasting and protection from handling damage, we are providing Shrink Filming on teak face side.