Amson Engineering

Vasai East, Palghar, Maharashtra

We are offering cream filling machine.This machine is very famous in cream and beauty products manufacturers, since this is the oldest and one of the finest proven semi-automatic design which can give high outputs. The model aempf200 is widely used in filling cream, paste, gels, fevicols, resins, adhesives, or any other semi-liquids in tubes bottlescontainers in cosmetic, chemical, ayurvedic, food and pharmaceutical industries. Machine structure:the machine consists of a hopper, an oscillating stainless steel valve, stainless steel piston- cylinder assembly and a cam arrangement. A motor of hp connected with a gear box helps in driving the valve, to and fro to suck the material from provided hopper and discharge through the nozzle. Any fill volume can be adjusted (as per syringe) by rotating the set screw over eccentric cam provided on the gear box output shaft. Various fill volumes can be achieved by selecting the size of cylinder during the order, there are cylinders with capacity10, 15, 25gms 50 gms, 100gms, 150gms, 200gms, 250gms, 300gms, and also 500gms available with us according to order. Horizontal as well as vertical models available as per order. The machine is covered and cladded by ss sheet metal and finished to mirror. All the material contact parts are made from stainless steel 304316 quality material as per customer specifications. Gmp models can also be made on request. Working:operating of this machine is very much simple. A very much user friendly machine with no maintenance which helps to increase production to the maximum. When the material is poured into the product hopper, the machine is ready for start. When the start switch is on the machine starts to fill at particular intervals, say 3 seconds. The speed of filling is fixed in this model. A maximum speed of 15 fills can be achieved from this machine. The only thing keep in mind while operating this machine is that the machine once started will fill intermittently after particular time intervals, so alert labour is required to avoid wastage of product. Specifications:machine name: horizontal motorised paste filler, machine model: aempf200machine size: 2ft lx 1.5ft wx 4 ft, h including hopper.machine weight: 60 kgs.motor capacity: 12hp single phase, 1440rpm.gear box: 50:1 ratiooperation by cam.stainless steel valve, barrel, and piston.adjustable volume from 15gms to 200gms as per cam arrangement.hopper capacity: 20 liters.stainless steel make.

We are offering lug capping machine. Lug capping machine is a very successful machine, with complete pneumatic working. The consistent demand of lug capping machine has encouraged us to manufacture the precision-engineered products to serve the best to the clients. Usesthis machine is very useful for food industry and added products where lug caps are usedtechnical specificationstwo movements for capping a glass bottle with a lug capthey are, clamping of cap with the bottle, and tightening of cap to the bottleafter a long time research and development, we have designed such a machine which can cap any sized lug caps to glass bottlesthe machine is called, pneumatic lug capping machine model number aeplc100.

We are offering motorised gel filling machine. this machine is very famous in cream and beauty products manufacturers, since this is the oldest and one of the finest proven semi-automatic design which can give high outputs. The model aempf200 is widely used in filling cream, paste, gels, fevicols, resins, adhesives, or any other semi-liquids in tubes bottlescontainers in cosmetic, chemical, ayurvedic, food and pharmaceutical industries. machine structure:the machine consists of a hopper, an oscillating stainless steel valve, stainless steel piston- cylinder assembly and a cam arrangement. A motor of hp connected with a gear box helps in driving the valve, to and fro to suck the material from provided hopper and discharge through the nozzle. Any fill volume can be adjusted (as per syringe) by rotating the set screw over eccentric cam provided on the gear box output shaft. Various fill volumes can be achieved by selecting the size of cylinder during the order, there are cylinders with capacity10, 15, 25gms 50 gms, 100gms, 150gms, 200gms, 250gms, 300gms, and also 500gms available with us according to order. Horizontal as well as vertical models available as per order. The machine is covered and cladded by ss sheet metal and finished to mirror. All the material contact parts are made from stainless steel 304316 quality material as per customer specifications. Gmp models can also be made on request. working:operating of this machine is very much simple. A very much user friendly machine with no maintenance which helps to increase production to the maximum. When the material is poured into the product hopper, the machine is ready for start. When the start switch is on the machine starts to fill at particular intervals, say 3 seconds. The speed of filling is fixed in this model. A maximum speed of 15 fills can be achieved from this machine. The only thing keep in mind while operating this machine is that the machine once started will fill intermittently after particular time intervals, so alert labour is required to avoid wastage of product. specifications:machine name: horizontal motorised paste filler, machine model: aempf200machine size: 2ft lx 1.5ft wx 4 ft, h including hopper. machine weight: 60 kgs. motor capacity: 12hp single phase, 1440rpm. gear box: 50:1 ratioelectricity consumption: 230vac 0.5 kwh. operation by cam. stainless steel valve, barrel, and piston. adjustable volume from 15gms to 100gms as per cam arrangement. hopper capacity: 20 liters.stainless steel make. output: 15 fills per minute.

We are offering augur filling machines come in a wide variety of sizes, shapes, filling principles and degrees of technical sophistication in response to the ever-widening diversity of powder filling applications around. Amsons powder filling machine is specially designed to get high accuracy outputs of powder in a limited time and thereby increase the production. For this achievement, we use digital timing mechanism assisted filling to get perfect accurate fills each time. We designed a model, where the wastage is theoretically nil and the accuracy is maximum. Hygienic and gmp standard parts assures safety for fast contaminating products. any free flowing material, or comparatively free flowing material like flour, spice powder chemical powder, toner powder, talcum, food ingredients, food colouring agents, agro products, masala and other pharma and chemical powders can be filled very accurately by using this machine model. Accuracy this filler is very much high up to +- 1% accuracy in each filling. Speed of filling is also high, since we provide auto option for intermittent filling. The principle of the vertical auger powder filling machine is very simple. Augur rotation creates forward movement of the material with its flights towards the filling nozzle. Each thread (flight) has a particular volume powder holding capacity as per material density. When the screw rotates, powder is taken by the screw and according to the direction of movement; it discharges the powder to the nozzle to the container or pouches. the basic filling head comprises five primary components:1. s.s hopper containing the powder to be dosed 2. augur or screw rotating vertically through the hopper. 3. funnel or tube outlet to hopper through which the lower parallel part of the auger doses. 4. auger (screw) drive. 5. agitation blade (stirrer) to assist powder feed properly into the flights of the augur. structure and working: powder filler is made strong and vibration free by its specially designed pillar structure. This is made from mild steel round pipe section of good thickness hard chrome plated, which holds drive unit, hopper and related parts. A drive motor and an electromagnetic clutch brake assembly are driving the augur. A safety cover is provided to this assembly to protect from accidents and to avoid dust from drive. Main driven shaft connected to the drive shaft through a bearing housing holds and rotates freely when the machine is operated. A stirrer blade provided separately which is operated independently over the driven shaft. The driven shaft is holding an accurately machined stainless steel augur which performs the filling inside the nozzle. The lower parallel flights of the auger within the funnel are machined to a constant pitch so that, when filled, each pitch has a precise volume. The auger drive rotates the auger at constant speed to produce a continuous dosing flow. The agitation blade, generally separately driven and controlled, rotates in the opposite direction to the auger breaking any bridge that tends to form in non-free flowing powders. The agitation blade extends right down to the throat of the funnel preventing rat-holing and cavitations and ensuring that the flights are fully filled. The startstop signals to the auger drive control the pre-set weight in weigh metric fillers. technical specifications afae1000: machine size: 1050 l x 700w x 2000mm height. machine model: afae1000- weigh based drive motor: 1 hp 230vac 50hz, 1440 rpm. With vfd(variable frequency drive)power : 230vac 50hz single phase stirrer motor: 1 hp 32rpm 230vac worm gearedelectromagnetic clutch- brake: hscbc 100, 24 vac cryotron makeload cell capacity: 3 kg, 100mg. all material contact parts in s.s. 304stainless steel 304 augur ( screw) type filling. hopper size 45 liters (s.s 304), 18 gauge, mirror finish for afae1000 fill capacity: 50-1000 gms at a time as per set time,

We feel pleasure to present ourselves as the leading Manufacturer, Exporter & Supplier of a wide collection of Augur Filling Machine. We manufacture it making use of top quality raw material. It is precisely designed & manufactured by us as per the customer demand. Our offered range is widely acknowledged by our customers for its longer life and effectiveness. Apart from this, our valued customers can purchase it at budget friendly prices.

Additional Information :

• Augur filling machine Timer Based or volumetric based are used to fill any free flowing material, or comparatively free flowing material like flour, spice powder chemical powder, toner powder, talcum, food ingredients, food colouring agents, agro products, masala and other pharma and chemical powders can be  filled very accurately by using this machine model. Accuracy this filler is very much high up to +/- 1% accuracy in each filling. Speed of filling is also high.

 

• The principle of the vertical timer based auger powder filling machine is very simple. Augur Rotation creates forward movement of the material with its flights towards the filling nozzle. Each thread (Flight) has a particular volume powder holding capacity as per material density. When the screw rotates, powder is taken by the screw and according to the direction of movement; it discharges the powder to the nozzle to the container or pouches.

• The pre set time on the timer controls the start and stop of rotation of augur each time.

 

• The Auger Filling Machine, which we offer, is available in a wide variety of sizes, shapes, filling principles and degrees of technical sophistication in response to the ever-widening diversity of powder filling applications around. Amson Engineering is leading manufacturers of Auger Filling Machine In Mumbai.Automatic Auger Filling Machine is specially designed to get high accuracy outputs of powder in a limited time and thereby increasing the production. For achieving this, we use digital timing mechanism assisted filling to get the perfect and accurate fills each time. We designed a model, where the wastage is theoretically nil and the accuracy is maximum. Hygienic and GMP standard parts assure safety for fast contaminating products.

 

• Any free flowing material or comparatively free flowing material like flour, spice powder chemical powder, toner powder, talcum, food ingredients, food coloring agents, agro products, masala and other pharmaceutical & chemical powders can be filled very accurately by using our Auger Filling Machine. The accuracy of the Auger Filling Machine, which we provide, is very high up to +/- 1% accuracy in each filling. Speed of filling is also high, since we provide auto option for intermittent filling. The principle of the vertical Auger Filling Machine is very simple. Augur Rotation creates forward movement of the material with its flights towards the filling nozzle. Each thread (Flight) has a particular volume powder holding capacity as per material density.

 

• When the screw rotates, powder is taken by the screw and according to the direction of movement; it discharges the powder to the nozzle to the container or pouches.

The Basic Filling Head Comprises Five Primary Components

• S.S Hopper containing the powder to be dosed
• Augur or screw rotating vertically through the hopper
• Funnel or tube outlet to hopper through which the lower parallel part of the auger doses
• Augur (Screw) drive
• Agitation blade (Stirrer) to assist powder feed properly into the flights of the augur

Structure & Working

• Augur filler is made strong and vibration free by its specially designed Pillar structure. This is made from Mild steel ROUND Pipe section of good thickness Hard chrome Plated, which holds drive unit, hopper and related parts. A drive motor and an electromagnetic clutch brake assembly are driving the Augur. A safety cover is provided to this assembly to protect from accidents and to avoid dust from drive. Main driven shaft connected to the drive shaft through a Bearing housing holds and rotates freely when the machine is operated. A stirrer blade provided separately which is operated independently over the driven shaft. The driven shaft is holding an accurately machined stainless steel Augur which performs the filling inside the Nozzle.

 

• The lower parallel flights of the auger within the funnel are machined to a constant pitch so that, when filled, each pitch has a precise volume. The auger drive rotates the auger at constant speed to produce a continuous dosing flow. The agitation blade, generally separately driven and controlled, rotates in the opposite direction to the auger breaking any bridge that tends to form in non-free flowing powders. The agitation blade extends right down to the throat of the funnel preventing rat-holing and cavitations and ensuring that the flights are fully filled. The start/stop signals to the auger drive control the pre-set weight in Weigh metric fillers.

 

Technical Specifications Afae1000

• Machine size - 1050 L X 700W X 2100mm height.
• Drive Motor - 1 HP 230VAC-415VAC 50Hz, 1440 rpm. with VFD(Variable Frequency Drive)
• Power  - 220VAC 50Hz Single Phase
• Stirrer motor: 1/2 Hp 32rpm 230VAC Worm Geared(optional)
• Electromagnetic Clutch- Brake - HSCBC 100, 24 VAC Cryotron Make
• All material contact parts in S.S. 304
• Stainless steel 304 Augur (Screw) type filling.
• Hopper size 50 Litres (S.S 304), 18 Gauge, mirror finish inside for AFAE1000
• Fill capacity - 100-1000 gms at a time as per set time,
• TIMER - EAPL Make.( India)

 

Additional Features

• Augur Based filling equipped with digital timer
• One touch Start by a foot-switch
• Drive through electro-magnetic clutch brake system to get high accuracy filling
• High output and increased efficiency
• Slow speed geared motor attached to stirrer helps to feed augur uniformly
• Output of 20-25 fills/minute can be achieved
• High Accuracy up-to +/- 0.5% of fill volume
• Low maintenance needed in this model

We are offering perfume filling machine. We manufacture a versatile filling machine for volume filling applications. The machine is called twin head vacuum filler. Very useful filling machine designed for alcohol, perfumes, and distillery industries. Here, the machine works on the basis of vacuum suction from the container. Fast filling of any glass bottles can be done by using this machine. Various volume can be filled by adjusting the height of bottle holder and by adjusting the vacuum filling nozzle. Machine structure and working:complete machine frame is made from mild steel angle structure, welded, and finished with polymer. Total frame structure is covered by stainless steel sheet metal of good gauge and finish. A hp 230vac oil cooled vacuum pump is providing the vacuum required during filling. This unit is mounted inside the frame with cover, so that the noise is maintained to a minimum during working. all the other parts like, liquid overflow trap, fill nozzles, are mounted over the frame structure. All material contact parts are made from stainless steel 304 quality or 316 material as per specifications. A trap vessel with suitable capacity is mounted at one side of the top to collect the overflow liquid from the bottles. Fill nozzles are comes in pairs like, 2, 4 as per fill requirement. Various fill volumes can be filled at a time as per adjustment. Also, the fill nozzles are capable to tilt to upto 90 degrees for easy filling. Machine is easy to operate. The glass bottle to be filled is to be pressed towards the fill nozzle, where a gasket is provided. When the bottle is vacuumised, the liquid is filled fast into it. The fill level is maintained as per the nozzle height adjustment inside the bottle. No maintenance is required since, there is no moving parts is involved. Most economical for level filling applications. special features: strong model with complete stainless steel mat finished covered bodyall product contact parts are made of stainless steel 304 quality. high speed filling as per volume required no dripping or wastage of liquids because of vacuum and trap vessel. multiple tilt able heads provides easiness in filling, bottle resting platform with height adjusting facility for nozzles. easy to operate. any volume can be filled from 5ml to 1 liter as per required according to nozzle depth inside the bottle. specifications: machine size: 600 x 600 x 1300 mm h machine weight: 60 kgs. Approx. gross weight : 100 kg. number of heads: 2 or more as per requestmachine name: two head vacuum liquid filling machine. output: 20 fills per minute from each head. power consumption: 0.5 kwh. electricity required: 1 phase 220 vac. 50 hz. vacuum pump: hp 25 lpm all material contact parts are in ss 304 tilt-able nozzles. base for bottles provided. inbuilt vacuum pump and closed-oil cooled type. high efficiency machine. 10 liter capacity overflow trap stainless steel vessel attached. easy to operate. low maintenance model. fill capacity from 10ml to 200ml or more. Uses: most suitable for filling any free flowing materials like, liquor, syrups, perfumes, nail polish, etc.

We are offering beverage filling machine. We manufacture a versatile filling machine for volume filling applications. The machine is called twin head vacuum filler. Very useful filling machine designed for alcohol, perfumes, and distillery industries. Here, the machine works on the basis of vacuum suction from the container. Fast filling of any glass bottles can be done by using this machine. Various volume can be filled by adjusting the height of bottle holder and by adjusting the vacuum filling nozzle. Machine structure and working:complete machine frame is made from mild steel angle structure, welded, and finished with polymer. Total frame structure is covered by stainless steel sheet metal of good gauge and finish. A hp 230vac oil cooled vacuum pump is providing the vacuum required during filling. This unit is mounted inside the frame with cover, so that the noise is maintained to a minimum during working. all the other parts like, liquid overflow trap, fill nozzles, are mounted over the frame structure. All material contact parts are made from stainless steel 304 quality or 316 material as per specifications. A trap vessel with suitable capacity is mounted at one side of the top to collect the overflow liquid from the bottles. Fill nozzles are comes in pairs like, 2, 4 as per fill requirement. Various fill volumes can be filled at a time as per adjustment. Also, the fill nozzles are capable to tilt to upto 90 degrees for easy filling. Machine is easy to operate. The glass bottle to be filled is to be pressed towards the fill nozzle, where a gasket is provided. When the bottle is vacuumised, the liquid is filled fast into it. The fill level is maintained as per the nozzle height adjustment inside the bottle. No maintenance is required since, there is no moving parts is involved. Most economical for level filling applications. special features: strong model with complete stainless steel mat finished covered bodyall product contact parts are made of stainless steel 304 quality. high speed filling as per volume required no dripping or wastage of liquids because of vacuum and trap vessel. multiple tilt able heads provides easiness in filling, bottle resting platform with height adjusting facility for nozzles. easy to operate. any volume can be filled from 5ml to 1 liter as per required according to nozzle depth inside the bottle. specifications: machine size: 600 x 600 x 1300 mm h machine weight: 60 kgs. Approx. gross weight : 100 kg. number of heads: 2 or more as per requestmachine name: two head vacuum liquid filling machine. output: 20 fills per minute from each head. power consumption: 0.5 kwh. electricity required: 1 phase 220 vac. 50 hz. vacuum pump: hp 25 lpm all material contact parts are in ss 304 tilt-able nozzles. base for bottles provided. inbuilt vacuum pump and closed-oil cooled type. high efficiency machine. 10 liter capacity overflow trap stainless steel vessel attached. easy to operate. low maintenance model. fill capacity from 10ml to 200ml or more. Uses: most suitable for filling any free flowing materials like, liquor, syrups, perfumes, nail polish, etc.

We are offering alcohol filling machine. We manufacture a versatile filling machine for volume filling applications. The machine is called twin head vacuum filler. Very useful filling machine designed for alcohol, perfumes, and distillery industries. Here, the machine works on the basis of vacuum suction from the container. Fast filling of any glass bottles can be done by using this machine. Various volume can be filled by adjusting the height of bottle holder and by adjusting the vacuum filling nozzle. Machine structure and working:complete machine frame is made from mild steel angle structure, welded, and finished with polymer. Total frame structure is covered by stainless steel sheet metal of good gauge and finish. A hp 230vac oil cooled vacuum pump is providing the vacuum required during filling. This unit is mounted inside the frame with cover, so that the noise is maintained to a minimum during working. all the other parts like, liquid overflow trap, fill nozzles, are mounted over the frame structure. All material contact parts are made from stainless steel 304 quality or 316 material as per specifications. A trap vessel with suitable capacity is mounted at one side of the top to collect the overflow liquid from the bottles. Fill nozzles are comes in pairs like, 2, 4 as per fill requirement. Various fill volumes can be filled at a time as per adjustment. Also, the fill nozzles are capable to tilt to upto 90 degrees for easy filling. Machine is easy to operate. The glass bottle to be filled is to be pressed towards the fill nozzle, where a gasket is provided. When the bottle is vacuumised, the liquid is filled fast into it. The fill level is maintained as per the nozzle height adjustment inside the bottle. No maintenance is required since, there is no moving parts is involved. Most economical for level filling applications. special features: strong model with complete stainless steel mat finished covered bodyall product contact parts are made of stainless steel 304 quality. high speed filling as per volume required no dripping or wastage of liquids because of vacuum and trap vessel. multiple tilt able heads provides easiness in filling, bottle resting platform with height adjusting facility for nozzles. easy to operate. any volume can be filled from 5ml to 1 liter as per required according to nozzle depth inside the bottle. specifications: machine size: 600 x 600 x 1300 mm h machine weight: 60 kgs. Approx. gross weight : 100 kg. number of heads: 2 or more as per requestmachine name: two head vacuum liquid filling machine. output: 20 fills per minute from each head. power consumption: 0.5 kwh. electricity required: 1 phase 220 vac. 50 hz. vacuum pump: hp 25 lpm all material contact parts are in ss 304 tilt-able nozzles. base for bottles provided. inbuilt vacuum pump and closed-oil cooled type. high efficiency machine. 10 liter capacity overflow trap stainless steel vessel attached. easy to operate. low maintenance model. fill capacity from 10ml to 200ml or more. Uses: most suitable for filling any free flowing materials like, liquor, syrups, perfumes, nail polish, etc.

We are offering beer filling machine. We manufacture a versatile filling machine for volume filling applications. The machine is called twin head vacuum filler. Very useful filling machine designed for alcohol, perfumes, and distillery industries. Here, the machine works on the basis of vacuum suction from the container. Fast filling of any glass bottles can be done by using this machine. Various volume can be filled by adjusting the height of bottle holder and by adjusting the vacuum filling nozzle. Machine structure and working:complete machine frame is made from mild steel angle structure, welded, and finished with polymer. Total frame structure is covered by stainless steel sheet metal of good gauge and finish. A hp 230vac oil cooled vacuum pump is providing the vacuum required during filling. This unit is mounted inside the frame with cover, so that the noise is maintained to a minimum during working. all the other parts like, liquid overflow trap, fill nozzles, are mounted over the frame structure. All material contact parts are made from stainless steel 304 quality or 316 material as per specifications. A trap vessel with suitable capacity is mounted at one side of the top to collect the overflow liquid from the bottles. Fill nozzles are comes in pairs like, 2, 4 as per fill requirement. Various fill volumes can be filled at a time as per adjustment. Also, the fill nozzles are capable to tilt to upto 90 degrees for easy filling. Machine is easy to operate. The glass bottle to be filled is to be pressed towards the fill nozzle, where a gasket is provided. When the bottle is vacuumised, the liquid is filled fast into it. The fill level is maintained as per the nozzle height adjustment inside the bottle. No maintenance is required since, there is no moving parts is involved. Most economical for level filling applications. special features: strong model with complete stainless steel mat finished covered bodyall product contact parts are made of stainless steel 304 quality. high speed filling as per volume required no dripping or wastage of liquids because of vacuum and trap vessel. multiple tilt able heads provides easiness in filling, bottle resting platform with height adjusting facility for nozzles. easy to operate. any volume can be filled from 5ml to 1 liter as per required according to nozzle depth inside the bottle. specifications: machine size: 600 x 600 x 1300 mm h machine weight: 60 kgs. Approx. gross weight : 100 kg. number of heads: 2 or more as per requestmachine name: two head vacuum liquid filling machine. output: 20 fills per minute from each head. power consumption: 0.5 kwh. electricity required: 1 phase 220 vac. 50 hz. vacuum pump: hp 25 lpm all material contact parts are in ss 304 tilt-able nozzles. base for bottles provided. inbuilt vacuum pump and closed-oil cooled type. high efficiency machine. 10 liter capacity overflow trap stainless steel vessel attached. easy to operate. low maintenance model. fill capacity from 10ml to 200ml or more. Uses: most suitable for filling any free flowing materials like, liquor, syrups, perfumes, nail polish, etc.

We are offering liquor filling machine. We manufacture a versatile filling machine for volume filling applications. The machine is called twin head vacuum filler. Very useful filling machine designed for alcohol, perfumes, and distillery industries. Here, the machine works on the basis of vacuum suction from the container. Fast filling of any glass bottles can be done by using this machine. Various volume can be filled by adjusting the height of bottle holder and by adjusting the vacuum filling nozzle. Machine structure and working:complete machine frame is made from mild steel angle structure, welded, and finished with polymer. Total frame structure is covered by stainless steel sheet metal of good gauge and finish. A hp 230vac oil cooled vacuum pump is providing the vacuum required during filling. This unit is mounted inside the frame with cover, so that the noise is maintained to a minimum during working. all the other parts like, liquid overflow trap, fill nozzles, are mounted over the frame structure. All material contact parts are made from stainless steel 304 quality or 316 material as per specifications. A trap vessel with suitable capacity is mounted at one side of the top to collect the overflow liquid from the bottles. Fill nozzles are comes in pairs like, 2, 4 as per fill requirement. Various fill volumes can be filled at a time as per adjustment. Also, the fill nozzles are capable to tilt to upto 90 degrees for easy filling. Machine is easy to operate. The glass bottle to be filled is to be pressed towards the fill nozzle, where a gasket is provided. When the bottle is vacuumised, the liquid is filled fast into it. The fill level is maintained as per the nozzle height adjustment inside the bottle. No maintenance is required since, there is no moving parts is involved. Most economical for level filling applications. special features: strong model with complete stainless steel mat finished covered bodyall product contact parts are made of stainless steel 304 quality. high speed filling as per volume required no dripping or wastage of liquids because of vacuum and trap vessel. multiple tilt able heads provides easiness in filling, bottle resting platform with height adjusting facility for nozzles. easy to operate. any volume can be filled from 5ml to 1 liter as per required according to nozzle depth inside the bottle. specifications: machine size: 600 x 600 x 1300 mm h machine weight: 60 kgs. Approx. gross weight : 100 kg. number of heads: 2 or more as per requestmachine name: two head vacuum liquid filling machine. output: 20 fills per minute from each head. power consumption: 0.5 kwh. electricity required: 1 phase 220 vac. 50 hz. vacuum pump: hp 25 lpm all material contact parts are in ss 304 tilt-able nozzles. base for bottles provided. inbuilt vacuum pump and closed-oil cooled type. high efficiency machine. 10 liter capacity overflow trap stainless steel vessel attached. easy to operate. low maintenance model. fill capacity from 10ml to 200ml or more. Uses: most suitable for filling any free flowing materials like, liquor, syrups, perfumes, nail polish, etc.

We, as a prominent Manufacturer, Exporter & Supplier, bring forth Manual Paste Filling Machine. It is manufactured using first-class raw material ensuring its durability and longer service life. Our team of experienced professional takes care of the designing and fabrication. We leave no stone unturned to ensure that our machine matches the various parameters and standards set by the industry. It is available in different customized specifications as per the request of the customer at economical rates.

Additional Information :This is the basic and proved machine for paste or cream filling applications. Very widely used and famous among small and medium production industry. Hand Operated Paste Filling Machine is very economical, easy to operate and easy to maintain type. Any semi-liquids and pasty materials, like cream, pastes, gel, ketchup, and other same kind materials can be easily filled accurately by using this machine.

Machine Structure and Working :

• Machine base and main structure is made from fabricated mild steel which is machined and duly powder coated to get the finish. There are parts like hopper and operating lever, fill barrel, nozzle, and adjustment screw are present in all machines.

 

• There is a strong Hopper provided with required volume capacity as per material. Small models comes with moving hopper and bigger models comes with steady Hopper. The Hopper is made from Stainless steel 304 as per specification.

 

• Fill Barrel is another main part in this machine. This is also made from Stainless steel. The inside of each barrel is ground to get mirror finish.  Barrel design is done as per fill volume requirements. The barrels are available in 15gms, 25gms, 50gms, 100gms, 150gms, 200gms, and also 500gms. The piston is a specially designed one, which does suction and filling in one stroke.  Fill nozzles are welded to the barrel. The mouth of nozzle is maintained towards down to fill smoothly into containers or tubes below the fill barrel.

 

Specifications:

• Machine Model -  AEHPF200, Steady Hopper type.
• Machine type - Hand operated Paste Filling Machine
• Machine dimensions - 15” W X 20” B X 34” H
• Machine weight - 35 kgs.
• Packing Size - 17” X 22” X 36”H
• Gross weight - 55 Kgs.
• Packing - Wooden Box.
• Fill range - 25gms- 200gms as per barrel capacity
• Fill capacity - up to 15 fills per minute as per operator skill.
• Hopper capacity - 22 Liters.

We, being a prime Manufacturer, Exporter & Supplier in the industry, offer Twin Head Vacuum Liquid Filling Machine. It is applied in a number of industrial purposes. The quality is ensured to be in compliance with the standards and parameters set by the industry. We make it available in a number of specifications. Its durability, high performance and dimensional accuracy make it a popular choice for varied purposes.

Additional Information :We manufacture a versatile filling machine for volume filling applications. The machine is called Twin Head Vacuum filler. Very useful filling machine designed for Alcohol, perfumes, nail polish, and distillery industries. Here, the machine works on the basis of Vacuum suction from the container. Fast filling of any Glass bottles can be done by using this machine. Various volumes can be filled by adjusting the height of Bottle holder and by adjusting the vacuum filling nozzle.

Machine Structure and Working :

• Complete machine frame is made from stainless steel frame structure, welded, and finished to mat. Total Frame structure is covered by stainless steel sheet metal of good gauge and finish .This machine is made a strong independent model.  A ¼ HP 230VAC oil cooled 75LPM output capacity Vacuum pump is providing the vacuum required during filling. This unit is mounted inside the frame, so that the noise is maintained to a minimum during working.

• All the other parts like, liquid overflow trap, fill nozzles, are mounted over the frame structure. All material contact parts are made from stainless steel 304 quality material as per specifications. A trap vessel with suitable capacity is mounted at one side of the top to collect the overflow liquid from the bottles.

• Fill nozzles are 2 as per fill requirement. Various fill volumes can be filled at a time as per adjustment.

• Machine is easy to operate. The glass bottle to be filled is to be placed below the fill nozzle. When the handle is pressed, a gasket provided on the nozzle press on the bottle mouth and makes air tight, thus the vacuum suck air from the bottle. When the bottle is vacuum, the liquid is filled fast into it. The fill level is maintained as per the nozzle depth adjustment inside the bottle.

• No maintenance is required since, there is no moving parts is involved. Most economical for level filling applications.

Special Features :

• Strong model with complete stainless steel Mat finished body
• All product contact parts are made of stainless steel 304 quality.
• High speed filling as per volume required
• No dripping or wastage of liquids because of vacuum and trap vessel.
• Multiple tilt able heads provides easiness in filling,
• Bottle resting platform with height adjusting facility for Nozzles.
• Easy to operate.
• Any volume can be filled from 5ml to 1 liter as per required according to nozzle depth inside the bottle.

 

Specifications

• Machine size -  800 X 900 X 1500 mm H
• Machine weight -  90 kgs. Approx.
• Gross Weight including Packing  -  120 kg.
• Number of heads -  2
• Machine name -  Two Head Vacuum Liquid filling Machine.
• Output -  15 fills per minute from each head.
• Power consumption -  0.5 KwH.
• Electricity required -  1 phase 220 VAC. 50 Hz.
• Vacuum pump -  ¼ HP 75 LPM ( Oil cooled, MINIVAC make)
• All material contact parts are in SS 304
• Base for bottles provided.
• Inbuilt vacuum pump and closed-Oil cooled type.
• High efficiency machine.
• 10 liter capacity overflow stainless steel vessel attached.
• Easy to operate.
• Low maintenance model.
• Fill capacity from 50ml to 1000ml or more up to 5000ml.

 

Uses : Most suitable for filling any free flowing materials like, liquor, nail polish, syrups, perfumes, etc.

We are offering hand operated liquid filling machine..this machine manufactured by amson engineering, mumbai, is the basic model for any liquid filling machines used in any industries. name of this machine is volumetric liquid filling machine, also known as hand operated liquid filler. Model is aevhf series. This machine is unique among small scale production units, because it is the most economical and of course it is easy in operation. High fill abilities and various settable fill volumes as per requirement makes this the perfect filling machine. Any free flowing material or even partially free flowing material which is to be filled by volume can correctly filled by this machine. Accuracy is high in this machine. Machine structure and working:machine consists of a small bracket structure, made of mild steel pipe structure. A vertically hanging syringe with a non-return valve mechanism is the filling unit. there is an operating lever provided at front side. A set screw is given at the bottom of the moving connector lever by which we can adjust stroke and there by the fill volume. Machine body is duly powder coated and finished. Gmp model machines are made with stainless steel for bracket. special features:aehvf model machine is small, compact and light weight. Total weight including syringe is only 20 kgs. So, the packing size is also less. There are many syringes you can select as per your requirement. The syringes are for filling volumes like 10-25ml, 25-50ml, 50-110ml, 10ml-150ml, 100ml-260ml, 250ml-500ml etc. Machine comes in standard polymer powder coated or gmp models available as per order. specifications; machine model: aehvf100machine type: hand operated volumetric liquid filling machinemachine dimensions: 8 w x 12 b x 23 hmachine weight: 20 kgs. packing size: 10 x 15 x 22hgross weight: 30 kgs. packing: wooden box. fill range: 5ml- 100 ml syringe capacity. fill capacity: up to 15 fills per minute maximum, various fill volume setting possible by set screw provided. nozzle height adjustable as per required. all material contact parts are made in ss304316 quality as per specifications. silicon rubber pipes at suction and delivery sides for hot liquids. no separate hopper provided with this machine. Liquid can be sucked from any vessel placed below the machine level. uses: best useful for perfumes, syrups, lotions, any liquids, pesticides, oils, hot liquids, and shampoo etc. complete manual operating. No electricity required in this machine

We are offering table top liquid filling machine. This machine manufactured by amson engineering, mumbai, is the basic model for any liquid filling machines used in any industries. name of this machine is volumetric liquid filling machine, also known as hand operated liquid filler. Model is aevhf series. This machine is unique among small scale production units, because it is the most economical and of course it is easy in operation. High fill abilities and various settable fill volumes as per requirement makes this the perfect filling machine. Any free flowing material or even partially free flowing material which is to be filled by volume can correctly filled by this machine. Accuracy is high in this machine. Machine structure and working:machine consists of a small bracket structure, made of mild steel pipe structure. A vertically hanging syringe with a non-return valve mechanism is the filling unit. there is an operating lever provided at front side. A set screw is given at the bottom of the moving connector lever by which we can adjust stroke and there by the fill volume. Machine body is duly powder coated and finished. Gmp model machines are made with stainless steel for bracket. special features:aehvf model machine is small, compact and light weight. Total weight including syringe is only 20 kgs. So, the packing size is also less. There are many syringes you can select as per your requirement. The syringes are for filling volumes like 10-25ml, 25-50ml, 50-110ml, 10ml-150ml, 100ml-260ml, 250ml-500ml etc. Machine comes in standard polymer powder coated or gmp models available as per order. specifications; machine model: aehvf100machine type: hand operated volumetric liquid filling machinemachine dimensions: 8 w x 12 b x 23 hmachine weight: 20 kgs. packing size: 10 x 15 x 22hgross weight: 30 kgs. packing: wooden box. fill range: 5ml- 100 ml syringe capacity. fill capacity: up to 15 fills per minute maximum, various fill volume setting possible by set screw provided. nozzle height adjustable as per required. all material contact parts are made in ss304316 quality as per specifications. silicon rubber pipes at suction and delivery sides for hot liquids. no separate hopper provided with this machine. Liquid can be sucked from any vessel placed below the machine level. uses: best useful for perfumes, syrups, lotions, any liquids, pesticides, oils, hot liquids, and shampoo etc. complete manual operating. No electricity required in this machine

As an eminent enterprise, we Manufacturer, Exporter & Supplier offer Volumetric Filling Machine. Moreover, our provided machine is available at cost effective prices. It is widely applauded and cherished because of its longer life and optimum design. For manufacturing it, we make use of only the first-rate raw material. A team of qualified experts strictly matches the quality to industrial quality standards to ensure there is no drop in the quality.

 

Structure and Working :

• Augur filler is made strong and vibration free by its specially designed Pillar structure. This is made from Mild steel ROUND Pipe section of good thickness Hard chrome Plated, which holds drive unit, hopper and related parts. A drive motor and an electromagnetic clutch brake assembly are driving the Augur. A safety cover is provided to this assembly to protect from accidents and to avoid dust from drive. Main driven shaft connected to the drive shaft through a Bearing housing holds and rotates freely when the machine is operated. A stirrer blade provided separately which is operated independently over the driven shaft. The driven shaft is holding an accurately machined stainless steel AUGUR which performs the filling inside the Nozzle.

 

• The lower parallel flights of the auger within the funnel are machined to a constant pitch so that, when filled, each pitch has a precise volume. The auger drive rotates the auger at constant speed to produce a continuous dosing flow. The agitation blade, generally separately driven and controlled, rotates in the opposite direction to the auger breaking any bridge that tends to form in non-free flowing powders. The agitation blade extends right down to the throat of the funnel preventing rat-holing and cavitation and ensuring that the flights are fully filled. The start/stop signals to the auger drive control the pre-set weight in Weigh metric fillers.

Technical Specifications Afae1000 

• Machine size - 1000 L X 700W X 2100mm height.
• Drive Motor - 1 HP 230VAC 50Hz, 1440 rpm. with VFD(Variable Frequency Drive)
• Power  -  220VAC 50Hz Single Phase
• Stirrer motor - 1 Hp 32RPM 230VAC Worm Geared
• Electromagnetic Clutch- Brake - HSCBC 100, 24 VAC Cryotron Make
• All material contact parts in S.S. 304
• Stainless steel 304 Augur (Screw) type filling.
• Hopper size - 40 Litres (S.S 304), 18 Gauge, mirror finish for AFAE1000
• Fill capacity - 50-1000 gms at a time as per set time,
• Weigh balance - Maximum load capacity -  3 Kgs.
• Maximum Fill capacity - 1000gms, as per set weight on weigh balance.(easily settable)
• Output - 15 fills per minute

 

Additional features :

• Augur Based filling equipped with digital Weigh balance (load cell).
• One touch Start by a foot-switch    
• Drive through electro-magnetic clutch brake system to get high accuracy filling.
• High output and increased efficiency.
• Slow speed geared motor attached to stirrer helps to feed augur uniformly
• Output of 15 fills/minute can be achieved.
• High Accuracy up-to +/- 0.5% of fill volume.
• Low maintenance needed in this model.

Aeppf series machine can simply called as a perfect filling machine or a multi-purpose filling machine. In this machine, we can fill from liquids to hard paste material without changing any parts. A very user-friendly model with low maintenance requirement. This machine is the upgraded version of ordinary semi-automatic motorised paste filler. Here, all filling operations are done by pneumatic cylinders. Less rotating moving parts means low maintenance.

We are offering motorised liquid filling machine. This semi automatic volumetric liquid filling machine, model no: aevmf021000 can be single or two head, table top, complete gmp semi-gmp model used to fill variety of liquids. Semi automatic volumetric liquid filling machine can be used for filling different types of glass. Plastic, metal containers. Any free flowing or partially free flowing liquids with comparatively low viscosity with volume filling requirement can easily and accurately filled with this machine. Output of this machine is very high as compared to manual hand operated machines.The main speciality of this machine is there is no human power is required to fill the bottle. The only job is to start the machine, and to place the empty bottles below the filling nozzle. All the other jobs like suction volume measuring and filling are done by this machine itself. Twin head machines in this series can fill two equal or different volumes at a time. If two peoples are doing the filling, then the output can be higher upto 16 fills per minute as per syringe size.Machine structure and working: the aevmf021000 works on volumetric principle and is fitted with singletwo syringes on both the sides. The motor and gear box are covered in a stainless steel cabinet. The desired volume can be adjusted by increasing or decreasing the eccentricity of the cam provided with the machine. Bottles are kept bellow the nozzles manually. There is stainless steel syringes and piston at both sides which do the filling. A non-return valve helps the control of flow towards and from the syringe during working. A polished ss nozzle is provided for both the syringes connected by pipes and mounted on height adjustable supports.The human labor is required to operate this machine is only one person. When main switch is on, the machine starts the filling. Each filling is done at a particular interval. The bottle to be filled is to be placed under the fill nozzle and after each filling, removed by hands. Output 16 bottles per minute from each head depending on type liquid and fill volume. All the contact parts are made of ss 304 as per material to be filled as per specification.special features:machine is made compact with sturdy internal frame structure.Complete machine frame is covered with stainless steel 304 quality sheet metal of good gauge and finished to mirror.All working parts like, motor, gear box, and shafts are inside the cover to avoid any danger.Adjustable fill volume by an eccentric cam screw rotation.Flame proof motor and switches provided for inflammable material filling on request.Very useful for soft drinks, chemicals, pesticides, oils, syrups, lotions etc.Specifications for double head liquid filler: machine size: 400mm l x 400mm w x 500mm hweight: 55kgs approx.syringe capacity: 50ml-1000ml max(ss syringe) at one sidesyringe capacity: 50ml- 1000ml max(ss syringe) at other sidemachine model: aevmf021000settable fill volume by cam and screw.motor capacity: 1hp 1440rpm, 220vac, 50hz, gear box: 60:1 ratio.output: 8 fills per syringe at each side(16 fills per minute total from both heads)number of fill nozzles: 2 nos.fill nozzles and output pipe provided, no separate hopper provided, input of (suction) liquid can be done from any vessel.heating jacketed vessel of any capacity can be available as per order as optional. 1 single person can operate the machine.change part syringe (compatible) available on order at extra cost, for different volume filling.

We are offering weigh filling machine. Powder filling machines come in a wide variety of sizes, shapes, filling principles and degrees of technical sophistication in response to the ever-widening diversity of powder filling applications around. Amsons powder filling machine is specially designed to get high accuracy outputs of powder in a limited time and thereby increase the production. For this achievement, we use digital timing mechanism assisted filling to get perfect accurate fills each time. We designed a model, where the wastage is theoretically nil and the accuracy is maximum. Hygienic and gmp standard parts assures safety for fast contaminating products. any free flowing material, or comparatively free flowing material like flour, spice powder chemical powder, toner powder, talcum, food ingredients, food colouring agents, agro products, masala and other pharma and chemical powders can be filled very accurately by using this machine model. Accuracy this filler is very much high up to +- 1% accuracy in each filling. Speed of filling is also high, since we provide auto option for intermittent filling. The principle of the vertical auger powder filling machine is very simple. Augur rotation creates forward movement of the material with its flights towards the filling nozzle. Each thread (flight) has a particular volume powder holding capacity as per material density. When the screw rotates, powder is taken by the screw and according to the direction of movement; it discharges the powder to the nozzle to the container or pouches. the basic filling head comprises five primary components:1. s.s hopper containing the powder to be dosed 2. augur or screw rotating vertically through the hopper. 3. funnel or tube outlet to hopper through which the lower parallel part of the auger doses. 4. auger (screw) drive. 5. agitation blade (stirrer) to assist powder feed properly into the flights of the augur. structure and working: powder filler is made strong and vibration free by its specially designed pillar structure. This is made from mild steel round pipe section of good thickness hard chrome plated, which holds drive unit, hopper and related parts. A drive motor and an electromagnetic clutch brake assembly are driving the augur. A safety cover is provided to this assembly to protect from accidents and to avoid dust from drive. Main driven shaft connected to the drive shaft through a bearing housing holds and rotates freely when the machine is operated. A stirrer blade provided separately which is operated independently over the driven shaft. The driven shaft is holding an accurately machined stainless steel augur which performs the filling inside the nozzle. The lower parallel flights of the auger within the funnel are machined to a constant pitch so that, when filled, each pitch has a precise volume. The auger drive rotates the auger at constant speed to produce a continuous dosing flow. The agitation blade, generally separately driven and controlled, rotates in the opposite direction to the auger breaking any bridge that tends to form in non-free flowing powders. The agitation blade extends right down to the throat of the funnel preventing rat-holing and cavitations and ensuring that the flights are fully filled. The startstop signals to the auger drive control the pre-set weight in weigh metric fillers. technical specifications afae1000: machine size: 1050 l x 700w x 2000mm height. machine model: afae1000- weigh based drive motor: 1 hp 230vac 50hz, 1440 rpm. With vfd(variable frequency drive)power : 230vac 50hz single phase stirrer motor: 1 hp 32rpm 230vac worm gearedelectromagnetic clutch- brake: hscbc 100, 24 vac cryotron makeload cell capacity: 3 kg, 100mg. all material contact parts in s.s. 304stainless steel 304 augur ( screw) type filling. hopper size 45 liters (s.s 304), 18 gauge, mirror finish for afae1000 fill capacity: 50-1000 gms at a time as per set time, additional features: augur based filling equipped with digital weighing unit. one touch start by a foot-switch drive through electro-magnetic clutch brake system to get high accuracy filling. high output and increased efficiency. slow speed geared motor attached to stirrer helps to feed augur uniformly output of 15- 20 fillsminute can be achieved. high accuracy up-to +- 0.5% of fill volume. low maintenance needed in this model.

We are offering honey filling machine. Aeppf series machine can simply called as a perfect filling machine or a multi-purpose filling machine. In this machine, we can fill from liquids to hard paste material without changing any parts. A very user-friendly model with low maintenance requirement. This machine is the upgraded version of ordinary semi-automatic motorised paste filler. Here, all filling operations are done by pneumatic cylinders. Less rotating moving parts means low maintenance.machine model: semi-automatic honey filler pneumatic, aeppf250machine overall size; 3.5 ft l x 1ft w x 4 ft hmachine weight: 85 kgs approx.all material contact parts are in ss304 grade, finished to mat.fill barrel size: 80mm bore x 150 length(for 700gms filling)output: 15 fills per minute with bigger nozzle.fill capacity: 50gms-700gmsml as per barrel sizecompressor required: 5.5 kg.cm2, 3 cfm.inbuilt panel box with timers switches and valves.40 liter hopper comes with this machine; also material can be sucked from any overhead vessel.adjustable stroke and fill volume with a hand wheel provided with the machine.adjustable fill height.

We are offering twist capping machine.Lug capping machine from amson engineering is a very successful machine, a very compact model with complete pneumatic working. There are two movements for capping a glass bottle with a lug cap. They are, clamping of cap with the bottle, and tightening of cap to the bottle. After a long time research and development, we have designed such a machine which can cap any sized lug caps to glass bottles. The machine is called, pneumatic lug capping machine model number aeplc80. Structure and working:this machine is having 2 pneumatic cylinders t two directions , mounted to get a free movement during capping. The cylinders are operated through a panel box mounted at one side of the unit. A pedal operating switch is provided to actuate the working. Each pressing will do each capping action. Machine is made compact and tabletop and weighs only 35 kgs. Operating this machine requires very less effort, since all the power needed is done by pneumatic cylinders. Operating is done, after bottle with cap is placed under the capping head and press the pedal operating switch. Here, the top clamping cylinder actuates, and the bottle with cap is tightly pressed to each other. Now, at the same time, another cylinder is actuated which does the capping action. The cylinder is set in such a way, that after a perfect clamp the cylinder is either slipped or stopped as per tightness required. Specifications:machine name: pneumatically operated semi-automatic lug capping machinemachine model: aeplc80capping capacity: up to 80mm size capoutput: 20 cpm. air consumption: 2 cfm, @ 5.5 bar. number of cylinders: 2 nos. power consumption: 230vac, 50 hz, 0.5 kwh. machine size: 15 x 15 x 25 h. machine weight: 35 kgs. separate panel box provided. table top model. bottle and caps placed manually. pedal switch provided for operating. strong design requires no maintenance. cap tightening height adjustable by hand wheel. bottle bottom gripping surface provided. automatic models also available on request.

We are offering manual cream filling machine. Manual hand operated paste filling machine model aehpf series can also called by many names such as tube filling machine, cream filling machine, curd filling machine, mehandi filling machine, chuna filling machine, fevicol filling machine, adhesive filling machine, gel filling machine etc, since almost all types of semi liquids pasty materials can be filled by using this machine. A very well known machine in all packaging industry. This machine is proven and manufactured for decades, since this is the basic paste filling machine which has the ability to fill any semi liquids accurately. Compact and easy operating and low maintenance makes this machine the winner among all the filling machines. Brief about the product:this is the basic and proved machine for paste or tube filling industry. Very widely used and famous among small and medium production industry. Hand operated paste filling machine is very economical, easy to operate and easy to maintain type. Any semi-liquids and pasty materials, like cream, pastes, gel, ketchup, and other same kind materials can be easily filled accurately by using this machine. Table top model which requires less space to fit and start the production. Inbuilt hopper and operating handle completes this machine for taking production. Machine structure and working:machine base and main structure is made from cast steel which is machined and duly powder coated to get the finish. There are parts like hopper and operating lever, fill barrel, nozzle, and adjustment screw are present in all machines. There is a strong hopper provided with required volume capacity as per material. Small models comes with moving hopper and bigger models comes with steady hopper. The hopper is made from stainless steel 304 as per specification. Fill barrel is another main part in this machine. This is also made from stainless steel. The inside of each barrel is ground to get mirror finish. barrel design is done as per fill volume requirements. The barrels are available in 15gms, 25gms, 50gms, 100gms, 150gms, 250gms, and also 500gms. The piston is a specially designed one, which does suction and filling in one stroke. fill nozzles are welded to the barrel. The mouth of nozzle is maintained towards down to fill smoothly into containers or tubes below the fill barrel. Specifications; machine model: aehpf50machine type: hand operated paste filling machinemachine dimensions: 8 w x 10 b x 24 l machine weight: 20 kgs. packing size: 10 x 12 x 25hgross weight: 35 kgs. packing: wooden box. fill range: 5gms- 50gms as per barrel capacityfill capacity: up to 20 fills per minute as per operator skill. hopper capacity: 15 liters. all material contact parts are made in stainless steel 304 316 as per specifications. bigger models available on request up to 500gms. steady hopper for bigger models. motorised machines also available on request. uses:most suitable for mehandi, cream, curd, fevicol, pastes, adhesives, gels, and any other herbal, chemical, cosmetic pastes.

We are offering gel filling machine. Manual hand operated paste filling machine model aehpf series can also called by many names such as tube filling machine, cream filling machine, curd filling machine, mehandi filling machine, chuna filling machine, fevicol filling machine, adhesive filling machine, gel filling machine etc, since almost all types of semi liquids pasty materials can be filled by using this machine. A very well known machine in all packaging industry. This machine is proven and manufactured for decades, since this is the basic paste filling machine which has the ability to fill any semi liquids accurately. Compact and easy operating and low maintenance makes this machine the winner among all the filling machines. Brief about the product:this is the basic and proved machine for paste or tube filling industry. Very widely used and famous among small and medium production industry. Hand operated paste filling machine is very economical, easy to operate and easy to maintain type. Any semi-liquids and pasty materials, like cream, pastes, gel, ketchup, and other same kind materials can be easily filled accurately by using this machine. Table top model which requires less space to fit and start the production. Inbuilt hopper and operating handle completes this machine for taking production. Machine structure and working:machine base and main structure is made from cast steel which is machined and duly powder coated to get the finish. There are parts like hopper and operating lever, fill barrel, nozzle, and adjustment screw are present in all machines. There is a strong hopper provided with required volume capacity as per material. Small models comes with moving hopper and bigger models comes with steady hopper. The hopper is made from stainless steel 304 as per specification. Fill barrel is another main part in this machine. This is also made from stainless steel. The inside of each barrel is ground to get mirror finish. barrel design is done as per fill volume requirements. The barrels are available in 15gms, 25gms, 50gms, 100gms, 150gms, 250gms, and also 500gms. The piston is a specially designed one, which does suction and filling in one stroke. fill nozzles are welded to the barrel. The mouth of nozzle is maintained towards down to fill smoothly into containers or tubes below the fill barrel. Specifications; machine model: aehpf50machine type: hand operated paste filling machinemachine dimensions: 8 w x 10 b x 24 l machine weight: 20 kgs. packing size: 10 x 12 x 25hgross weight: 35 kgs. packing: wooden box. fill range: 5gms- 50gms as per barrel capacityfill capacity: up to 20 fills per minute as per operator skill. hopper capacity: 15 liters. all material contact parts are made in stainless steel 304 316 as per specifications. bigger models available on request up to 500gms. steady hopper for bigger models. motorised machines also available on request. uses:most suitable for mehandi, cream, curd, fevicol, pastes, adhesives, gels, and any other herbal, chemical, cosmetic pastes.

We are offering mehandi filling machine. Manual hand operated paste filling machine model aehpf series can also called by many names such as tube filling machine, cream filling machine, curd filling machine, mehandi filling machine, chuna filling machine, fevicol filling machine, adhesive filling machine, gel filling machine etc, since almost all types of semi liquids pasty materials can be filled by using this machine. A very well known machine in all packaging industry. This machine is proven and manufactured for decades, since this is the basic paste filling machine which has the ability to fill any semi liquids accurately. Compact and easy operating and low maintenance makes this machine the winner among all the filling machines.Brief about the product:this is the basic and proved machine for paste or tube filling industry. Very widely used and famous among small and medium production industry. Hand operated paste filling machine is very economical, easy to operate and easy to maintain type. Any semi-liquids and pasty materials, like cream, pastes, gel, ketchup, and other same kind materials can be easily filled accurately by using this machine. Table top model which requires less space to fit and start the production. Inbuilt hopper and operating handle completes this machine for taking production. Machine structure and working:machine base and main structure is made from cast steel which is machined and duly powder coated to get the finish. There are parts like hopper and operating lever, fill barrel, nozzle, and adjustment screw are present in all machines.There is a strong hopper provided with required volume capacity as per material. Small models comes with moving hopper and bigger models comes with steady hopper. The hopper is made from stainless steel 304 as per specification. Fill barrel is another main part in this machine. This is also made from stainless steel. The inside of each barrel is ground to get mirror finish. barrel design is done as per fill volume requirements. The barrels are available in 15gms, 25gms, 50gms, 100gms, 150gms, 250gms, and also 500gms. The piston is a specially designed one, which does suction and filling in one stroke. fill nozzles are welded to the barrel. The mouth of nozzle is maintained towards down to fill smoothly into containers or tubes below the fill barrel.Specifications; machine model: aehpf50machine type: hand operated paste filling machinemachine dimensions: 8 w x 10 b x 24 l machine weight: 20 kgs.packing size: 10 x 12 x 25hgross weight: 35 kgs.packing: wooden box.fill range: 5gms- 50gms as per barrel capacityfill capacity: up to 20 fills per minute as per operator skill.hopper capacity: 15 liters.all material contact parts are made in stainless steel 304 316 as per specifications.bigger models available on request up to 500gms.steady hopper for bigger models.motorised machines also available on request. Uses:most suitable for mehandi, cream, curd, fevicol, pastes, adhesives, gels, and any other herbal, chemical, cosmetic pastes.

Enchanting our customers with our excellent performance, we have cemented our status as a top figure in the industry. As a Manufacturer, Exporter & Supplier, we proudly present Hard Paste Extrusion Filling Machine to our customers. It is developed using the finest material and latest techniques in fulfillment with international standards. Our valuable customers can easily avail it from us in a given time frame at industry leading rates.

Thanks to our excellence at meeting customer needs, we have positioned ourselves as a prime Manufacturer, Exporter & Supplier in the industry. We offer Weighmetric Powder Filling Machine in a wide range of designs and specifications to choose from. Our outstanding quality team runs various quality tests to make sure we exceed the quality standards. These quality checks make certain its durability, fine finish and impeccable quality.

 

Structure and Working :

• Powder filler is made strong and vibration free by its specially designed Pillar structure. This is made from Mild steel ROUND Pipe section of good thickness Hard chrome Plated, which holds drive unit, hopper and related parts. A drive motor and an electromagnetic clutch brake assembly are driving the Augur. A safety cover is provided to this assembly to protect from accidents and to avoid dust from drive. Main driven shaft connected to the drive shaft through a Bearing housing holds and rotates freely when the machine is operated. A stirrer blade provided separately which is operated independently over the driven shaft. The driven shaft is holding an accurately machined stainless steel AUGUR which performs the filling inside the Nozzle.

 

• The lower parallel flights of the auger within the funnel are machined to a constant pitch so that, when filled, each pitch has a precise volume. The auger drive rotates the auger at constant speed to produce a continuous dosing flow. The agitation blade, generally separately driven and controlled, rotates in the opposite direction to the auger breaking any bridge that tends to form in non-free flowing powders. The agitation blade extends right down to the throat of the funnel preventing rat-holing and cavitation and ensuring that the flights are fully filled. The start/stop signals to the auger drive control the pre-set weight in Weigh metric fillers.

 

Technical Specifications Afae1000 

• Machine size - 1000 L X 700W X 2100mm height.
• Drive Motor - 1 HP 230VAC 50Hz, 1440 rpm. with VFD(Variable Frequency Drive)
• Power  -  220VAC 50Hz Single Phase
• Stirrer motor - 1 Hp 32RPM 230VAC Worm Geared
• Electromagnetic Clutch- Brake - HSCBC 100, 24 VAC Cryotron Make
• All material contact parts in S.S. 304
• Stainless steel 304 Augur (Screw) type filling.
• Hopper size -  40 Litres (S.S 304), 18 Gauge, mirror finish for AFAE1000
• Fill capacity - 50-1000 gms at a time as per set time,
• Weigh balance - Maximum load capacity -  3 Kgs.
• Maximum Fill capacity  - 1000gms, as per set weight on weigh balance.(easily settable)
• Output -  15 fills per minute

 

Additional features :

• Augur Based filling equipped with digital Weigh balance (load cell).
• One touch Start by a foot-switch    
• Drive through electro-magnetic clutch brake system to get high accuracy filling.
• High output and increased efficiency.
• Slow speed geared motor attached to stirrer helps to feed augur uniformly
• Output of 15 fills/minute can be achieved.
• High Accuracy up-to +/- 0.5% of fill volume.
• Low maintenance needed in this model.

We offer a wide range of ropp capping machines, which is especially designed for sealing different types of bottles and containers. It can seal any bottles or containers made of tin, hdpe, pet, glass and aluminum with standard ropp caps. Our range is easy to operate, durable, sturdy in construction and dimensionally accurate. specifications:overall dimensions: 22 w x 24 b x 60 hdrive motor: hp 1440 rpm single phase, 220vac.number of rollers: 2machine type: pedal operated motorised capping machine.model: aerp standard modelcapping type: thread type on aluminium caps.can cap smaller to bigger bottles.caps to be placed manuallyautomatic models availableused for modifying the seal rectangular tin containers from 0. 25 liters to 5 litersmodification can be done for sealing fresh top gas tight closures of 12 or 1 liter glass or pet bottle with neck holder attachment for non-rigid bottlesall moving parts are covered with guardsrotary head set helps in meeting different sealing torque requirements, which is easy to adjust by using set screwschange parts available on request

Powder filler is made strong and vibration free by its specially designed pillar structure. This is made from mild steel round pipe section of good thickness hard chrome plated, which holds drive unit, hopper and related parts. A drive motor and an electromagnetic clutch brake assembly are driving the augur. A safety cover is provided to this assembly to protect from accidents and to avoid dust from drive. Main driven shaft connected to the drive shaft through a bearing housing holds and rotates freely when the machine is operated. A stirrer blade provided separately which is operated independently over the driven shaft. The driven shaft is holding an accurately machined stainless steel augur which performs the filling inside the nozzle. The lower parallel flights of the auger within the funnel are machined to a constant pitch so that, when filled, each pitch has a precise volume. The auger drive rotates the auger at constant speed to produce a continuous dosing flow. The agitation blade, generally separately driven and controlled, rotates in the opposite direction to the auger breaking any bridge that tends to form in non-free flowing powders. The agitation blade extends right down to the throat of the funnel preventing rat-holing and cavitations and ensuring that the flights are fully filled. The startstop signals to the auger drive, control the pre-set weight in weigh metric fillers. technical specifications afae200: machine size: 1050 l x 700w x 1600mm height. drive motor :12 hp 230vac 50hz, 1440 rpm. With vfdpower : 230vac 50hz single phase stirrer motor: 14 hp 50rpm 230vac worm gearedelectromagnetic clutch- brake: 14 t 24 vac cryotron makeall material contact parts in s.s. 304stainless steel 304 augur ( screw) type filling. hopper size 40 litres (s.s 304), 18 gauge, mirror finish for afae200 fill capacity: 20-200 gms at a time as per set weight.

We are offering volumetric powder filling machine. volumetric powder filling machines come in a wide variety of sizes, shapes, filling principles and degrees of technical sophistication in response to the ever-widening diversity of powder filling applications around. Amsons augur filling machine is specially designed to get high accuracy outputs of powder in a limited time and thereby increase the production. For this achievement, we use digital timing mechanism assisted filling to get perfect accurate fills each time. We designed a model, where the wastage is theoretically nil and the accuracy is maximum. Hygienic and gmp standard parts assures safety for fast contaminating products. any free flowing material, or comparatively free flowing material like flour, spice powder chemical powder, toner powder, talcum, food ingredients, food colouring agents, agro products, masala and other pharma and chemical powders can be filled very accurately by using this machine model. Accuracy this filler is very much high up to +- 1% accuracy in each filling. Speed of filling is also high, since we provide auto option for intermittent filling. the principle of the vertical auger powder filling machine is very simple. Augur rotation creates forward movement of the material with its flights towards the filling nozzle. Each thread (flight) has a particular volume powder holding capacity as per material density. When the screw rotates, powder is taken by the screw and according to the direction of movement; it discharges the powder to the nozzle to the container or pouches. the basic filling head comprises five primary components:1. s.s hopper containing the powder to be dosed 2. augur or screw rotating vertically through the hopper. 3. funnel or tube outlet to hopper through which the lower parallel part of the auger doses. 4. augur (screw) drive. 5. agitation blade (stirrer) to assist powder feed properly into the flights of the augur. structure and working: augur filler is made strong and vibration free by its specially designed pillar structure. This is made from mild steel round pipe section of good thickness hard chrome plated, which holds drive unit, hopper and related parts. A drive motor and an electromagnetic clutch brake assembly are driving the augur. A safety cover is provided to this assembly to protect from accidents and to avoid dust from drive. Main driven shaft connected to the drive shaft through a bearing housing holds and rotates freely when the machine is operated. A stirrer blade provided separately which is operated independently over the driven shaft. The driven shaft is holding an accurately machined stainless steel augur which performs the filling inside the nozzle. the lower parallel flights of the auger within the funnel are machined to a constant pitch so that, when filled, each pitch has a precise volume. The auger drive rotates the auger at constant speed to produce a continuous dosing flow. The agitation blade, generally separately driven and controlled, rotates in the opposite direction to the auger breaking any bridge that tends to form in non-free flowing powders. The agitation blade extends right down to the throat of the funnel preventing rat-holing and cavitations and ensuring that the flights are fully filled. The startstop signals to the auger drive, control the pre-set weight in weigh metric fillers. technical specifications afae500: machine size: 1050 l x 700w x 1950mm height. drive motor :1 hp 230vac 50hz, 1440 rpm. With vfd(variable frequency drive)power : 230vac 50hz single phase stirrer motor: 12 hp 30rpm 230vac worm gearedelectromagnetic clutch- brake: hscbc 100, 24 vac cryotron makeall material contact parts in s.s. 304stainless steel 304 augur ( screw) type filling. hopper size 45 litres (s.s 304), 18 gauge, mirror finish for afae500 fill capacity: 50-500 gms at a time as per set time, additional features: augur based filling equipped with digital timer. one touch start by a foot-switch drive through electro-magnetic clutch brake system to get high accuracy filling. high output and increased efficiency. slow speed geared motor attached to stirrer helps to feed augur uniformly output of 20-25 fillsminute can be achieved. high accuracy up-to +- 0.5% of fill volume. low maintenance needed in this model .

Being a prominent Manufacturer, Exporter & Supplier in the industry, we present a wide range of Twin Head Perfume Filling Machine to our customers. The quality we offer is unmatched. We take special care of quality by testing the machine against the highest parameters of quality set by the industry. We provide the machine in safe packaging at affordable rates. We also deliver at your doorstep at your ease owing to our first-rate distribution system.

Additional Information :Twin Head Vacuum Assisted Perfume Filling Machine we manufacture are versatile filling machine for volume filling applications mostly in Perfume Industries where the volume of filling is important. Very useful filling machine designed for perfume industries. Here, the machine works on the basis of air removal from glass or hard bottles using Vacuum suction from the bottle and liquid filling inside. Fast filling of any Glass bottles can be done by using this machine. Various volume can be filled by adjusting the height of Bottle holder and by adjusting the vacuum filling nozzle.

 

Special Features :

• Strong model with complete stainless steel Mat finished covered body
• All product contact parts are made of stainless steel 304 quality.
• High speed filling as per volume required
• No dripping or wastage of liquids because of vacuum and trap vessel.
• 1 pairs of heads provides easiness in filling,
• Bottle resting platform with height adjusting facility for Nozzles.
• Easy to operate.
• Any volume can be filled from 2ml to 200ml as per required according to nozzle depth inside the bottle.

 

Specifications

• Machine size - 600 X 500 X 1100 mm H
• Machine weight -  80 kgs. Approx.
• Gross Weight including Packing - 110 kg.
• Number of heads - 2
• Machine name -  Twin Head Vacuum filling Machine.
• Output - 15 fills per minute from each head @100ml.
• Power consumption - 0.3 KwH.
• Electricity required - 1 phase 220 VAC. 50 Hz.
• Vacuum pump -  1/4HP 75 LPM, oil cooled/Air cooled, MINIVAC make.
• All material contact parts are in SS 304
• Base for bottles provided.
• High efficiency machine.
• 10 liter capacity overflow stainless steel vessel attached.
• Easy to operate.
• Low maintenance model.
• Fill capacity from 2ml to 200ml.