Amsak Cranes Pvt Ltd

National Highway, Chennai, Tamil Nadu

Underslung-Cranes are the ideal solution when supporting steelwork beneath the crane is not an option. Amsak offers single span and multi-span options. As Underslung-Cranes are supported from the roof structure, minimized loadings are usually a requirement.

Amsak-Cranes manufacture a standard range of Single Girder Underslung Cranes in capacities up to 12.5 Tons. Larger capacities are available upon request but roof loads may be a limiting factor. Multi-span cranes are available with overall bridge lengths greater than 100 Meters.

Underslung-Cranes are the ideal solution when supporting steelwork beneath the crane is not an option. Amsak offers single span and multi-span options. As Underslung-Cranes are supported from the roof structure, minimized loadings are usually a requirement.Amsak-Cranes manufacture a standard range of Single Girder Underslung Cranes in capacities up to 12.5 Tons. Larger capacities are available upon request but roof loads may be a limiting factor. Multi-span cranes are available with overall bridge lengths greater than 100 Meters.

Single Girder EOT Cranes are designed to cover a wide range of modern industrial demands, providing excellent value for money with no compromise on performance. Amsaks single girder crane has reduced wheel loads, saving costs on new support structures and increased lifting capacities on existing structures. Amsak cranes offer various crane beams to end carriage constructions to ensure optimum use of headroom available. Hoists are offered as standard in low headroom format running on the bottom flange of the beam. The mechanisms used in our industrial cranes are indivisible part of them, covering the range of Chain hoists from 250 Kg to wire rope hoists of 30 Tons. They are of very robust construction with a high level of standardization, making them very modular and adaptable to any need; high reliability components are available for a wide range of applications.

Double Girder Cranes give a better height of lift in given headroom as the hook travels between the beams. Generally this type of crane utilizes a top running trolley hoist which moves along the top of the two bridge beams on its own set of truckstrolley wheels. The hook from the hoist falls between the two bridge beams. Utilizing this hoistcrane configuration increases headroom under the crane.They are available in higher capacities than Single Girder and for heavy-duty applications they can be supplied with open winch hoists.Amsak Cranes offer Double Girder Cranes with capacity range from 25 Tons to 200 Tons. One simple advantage of the double girder design is the possibility to fit a walkway to the crane, which gives maintenance access to many critical parts of the crane and often to overhead lighting etc.

Amsak Wall-Traveling Jib Cranes provide long lateral movement of materials without taking up floor space or interloping with large overhead cranes. Wall-traveling jibs escalates overall plant productivity by quickly handling smaller lifts. You can cover an entire series of workstations using one agile wall-traveling crane for (conceivably) the entire length of your building. A resourceful wall travelling crane exclusively designed & positioned correctly can enhance productivity in large shops. Customarily these cranes are fitted under the main crane and run on a combination of inverted H beams. Amsak Cranes is one of the few corporations in India manufacturing these walls travelling cranes. These are usually fitted at 90 degree to the main crane bay and usually accommodates to an individual or multiple workstations. Capacity ranges are about up to 5 meters with jib radius of 7 meters Amsak Wall-Traveling Jib Cranes are cost-effective, custom engineered solutions that are specifically designed to meet your production needs and building specifications.

Amsak Wall-Traveling Jib Cranes provide long lateral movement of materials without taking up floor space or interloping with large overhead cranes. Wall-traveling jibs escalates overall plant productivity by quickly handling smaller lifts. You can cover an entire series of workstations using one agile wall-traveling crane for (conceivably) the entire length of your building.

A resourceful wall travelling crane exclusively designed & positioned correctly can enhance productivity in large shops. Customarily these cranes are fitted under the main crane and run on a combination of inverted H beams. Amsak Cranes is one of the few corporations in India manufacturing these walls travelling cranes. These are usually fitted at 90 degree to the main crane bay and usually accommodates to an individual or multiple workstations. Capacity ranges are about up to 5 meters with jib radius of 7 meters

Amsak Wall-Traveling Jib Cranes are cost-effective, custom engineered solutions that are specifically designed to meet your production needs and building specifications.

WALL-TRAVELING JIB CRANE FEATURES

• Variable frequency drives (VFDs) for multi-speed operation
• Two-speed controls include mainline contactor, control transformer, inverter acceleration control, and fuses in NEMA 3R, 4, or 12 enclosures.
• Crane drive has a squirrel cage motor with double-reduction spur gear reducer.
• Jib boom is fabricated from standard S beam with vertical angle truss to reduce deflection.
• Jib boom and truss bolt onto the back frameno welding needed.
• End trucks are constructed from channel beam frames and resist twisting.
• The end trucks are jig-fixed for optimal fit and travel.
• End trucks bolt onto the jibs back frame.
• Top-running end trucks include double-flanged crane wheels made from forged steel for long service life.

Many industries need specifically tailored cranes for their processes. Amsak custom cranes have lifting capacities up to several hundred tons and they can be optimized to the needs of your business throughout the crane lifecycle.

Each tailored crane is customized case-by-case; to make sure it is the right lifting solution for that specific need.

Many personalized cranes use our standard products but in unique ways, and we also design new elements as needed. We use proven technology solutions and fully tested parts for your custom crane to ensure safety and reliability.

There are some industrial processes that have such complex handling and safety requirements that it is necessary to design cranes independently for specific applications. Amsak offer a long experience in special and custom-built cranes in areas as diverse as handling the cores for a nuclear reactor, power station cranes, steelworks cranes, computer-controlled furnace charging and magnet cranes.

Where high proportions of handling or process incorporation are required focused Amsak control systems provide the ultimate solution such instances include,

• Condition monitoring
• Infinitely variable speed control
• Load-sway prevention systems by PLC
• Crane automation
• Position encoding
• Electrical braking

• Steel manufacturing requires protection from heat and dust.
• Fuel and energy production often needs specific grabs.
• The automotive industry uses special cranes for coil handling, stamping, and assembly.
• Mining and primary metal processing often have special environments, with special requirements for cranes.

Double Girder Cranes give a better height of lift in given headroom as the hook travels between the beams. Generally this type of crane utilizes a top running trolley hoist which moves along the top of the two bridge beams on its own set of trucks/trolley wheels. The hook from the hoist falls between the two bridge beams. Utilizing this hoist/crane configuration increases headroom under the crane.

They are available in higher capacities than Single Girder and for heavy-duty applications they can be supplied with open winch hoists.

Amsak Cranes offer Double Girder Cranes with capacity range from 25 Tons to 200 Tons. One simple advantage of the double girder design is the possibility to fit a walkway to the crane, which gives maintenance access to many critical parts of the crane and often to overhead lighting etc.

A gantry crane with 1 end of the bridge rigidly supported on one or more movable legs, running on a fixed rail or runway, the other end of the bridge being supported by a truck running on an elevated rail or runway. These Semi Gantry cranes are offered with Amsak Build Electric Hoists. Long Travel Wheels are proposed to suit established Rails or modern bright bars. On-board Generators and Power Feeding provisions can be incorporated as an option for our Semi Goliath Cranes in remote areas. This prearrangement is usually through a motorized spring loaded cable reeling drums. These cranes usually have one end carriage on top running beams and other end carriage on floor level. These cranes are specifically designed and are extensively used where space is a restriction.

Amsak Cranes Private Limited is an Indian leader in designing and manufacturer’s of Gantry Cranes. Amsak adapts their Gantry Cranes manufacturing process to the different customer´s requirements, taking care of which kind of work it is going to performance. Unlike EOT cranes, Gantry cranes have legs and move on runways, which are usually on floor level.

Goliath Cranes are available in both Single and Double Girder format. It is ideal for outdoor applications where lifting facilities are provided without the cost of a building or any supporting steelwork. They are also suited to indoor applications where existing building structures are not suitable to take overhead cranes, and where additional supporting steelwork would result in a loss of floor area.

Goliath-Cranes can be constructed with a cantilever to allow handling outside the rail centers. Typical applications for this type of crane include steel stockyards, loading areas, the concrete industry and shipbuilding.

These cranes are highly efficient to work outdoors, achieving high speeds and capacities.

Industrial Applications:

Industrial areas where the heavy load products are manufactured, in which this cranes are used in lifting the parts of the products manufactured.

THE ULTIMATE IN CRANE ADAPTABILITY & PORTABILITY

Moving and lifting heavy materials doesn’t have to involve installing expensive equipment or permanently changing your facility.

• Gantry cranes are constructed and stripped quickly and easily, making them ideal for use in a rented facility or in multiple work areas.
• Amsak Gantry Cranes are easy to install and relocate.
• If needed, V-tracks and guide angles simply lag bolt to existing floor.
• All Gantries are pre-engineered for powered hoist operation and easy to position and operate.

Amsak Gantry Cranes are unrivaled in design strength, stability, and quality construction:

• Precision tolerances and welding ensure component alignment and operational stability.
• We use standardized, quality Indian I-beams.
• All nuts, bolts, and pins are plated for corrosion resistance, and all Gantries are painted safety yellow.
• Outdoor use options available, including exterior coatings and stainless steel motors.

The original steam engine crane, introduced in the 18th or 19th century, with many remaining in use well into the late 20th century. Modern cranes usually use internal combustion engines or electric motors and hydraulic systems to provide a much greater lifting capability than was previously possible, although manual cranes are still utilized where the provision of power would be inefficient. Cranes are commonly employed in industries such as, the manufacturing industry for the assembling of heavy equipment, the transportation industry for the loading and unloading of consignment and in the construction industry for the movement of resources.

We are offering eot cranes - double girder. Double girder cranes give a better height of lift in given headroom as the hook travels between the beams. They are available in higher capacities than single girder and for heavy duty applications they can be supplied with open winch hoists. Normally double girder cranes have 25 tones capacity and also in higher capacities. One simple advantage of the double girder design is the possibility to fit a walkway to the crane which gives maintenance access to many critical parts of the crane and often to overhead lighting etc. Capacity ranges from 1 to 10 tonnes5 to 15 tonnes15 tonnes to 25 tonnes industrial applications: mechanical industries for steel stock holdingfor lifting structure steels in construction sitesused in glass handling.Manufacturing units such as paint shops, machine shops, and other single plate liftingrailway workshopsboat manufacturing industriescontainer lifting

We are offering goliath cranes. Goliath-cranes are available in both single and double girder format. It is ideal for outdoor applications where lifting facilities are provided without the cost of a building or any supporting steelwork. They are also suited to indoor applications where existing building structures are not suitable to take overhead cranes, and where additional supporting steelwork would result in a loss of floor area. Goliath-cranes can be constructed with a cantilever to allow handling outside the rail centers. Typical applications for this type of crane include steel stock yards, loading areas, the concrete industry and ship building. capacity ranges from • 10 to 200 tonnes • 150 to 400 tonnes • 350 tonnes to 680 tonnes • 750 tonnes to 840 tonnes industrial applications: industrial areas where the heavy load products are manufactured, in which these cranes are used in lifting the parts of the products manufactured.

We offer hot cranes. Amsak cranes h.o.t-cranes are designed to cover a wide range of modern industrial demands, providing excellent value for money with no compromise on performance. It is designed with state of art latest techniques, strict quality checks at various stages and final overload testing assures high reliability and safety. Capacity ranges from • 1 to 3 tonnes • 2 to 7 tonnes • 6 to 10 tonnes

Single girder cranes are designed to cover a wide range of modern industrial demands, providing excellent value for money with no compromise on performance. Amsak's single girder crane has reduced wheel loads, saving costs on new support structures and increased lifting capacities on existing structures.

Underslung Cranes Manufacturer in IndiaUnderslung-Cranes are the ideal solution when supporting steelwork beneath the crane is not an option. We offer single span and multi-span options. As underslung-Cranes are supported from the roof structure, minimised loadings are usually a requirement. Amsak-Cranes manufacture a standard range of single girder underslung cranes in capacities up to 12.5 tonnes. Larger capacities are available upon request but roof loads may be a limiting factor. Multi-span cranes are available with overall bridge lengths greater than 100 metres.

Amsak Crane designs, fabricates and installs gantry bridge crane systems to meet your material handling requirements. Our gantry bridge crane systems are available with either single, double girder bridges. Gantry cranes are ideal for use in aircraft, automotive, and marine repair shops. They also work well in warehouses, machine shops, and loading areas. Gantry-cranes are supplied with four roller-bearing steel wheels for easy maneuverability.

Rubber Tyre Gantry CranesGantry cranes are also available running on rubber tyres so that tracks are not needed. Rubber tyre gantry cranes are essential for moving Steel Coils Containers from berths throughout the rest of the yard. For this task they come in large sizes, that are used for moving to straddle multiple lanes of rail, road, or container storage. They also are capable of lifting fully loaded containers to great heights. Rubber tyre gantry cranes come in the form of straddle carriers which are used when moving individual containers or vertical stacks of containers. Portable gantry crane systems, such as rubber tyre gantry cranes, are in high demand in terminals and ports restricted in size and reliant on maximising vertical space and not needing to haul containers long distances. This is due to the relatively slow speed yet high reach of rubber tyre gantry cranes when compared to other forms of container terminal equipment.

Single Girder Cranes are designed to cover a wide range of modern industrial demands, providing excellent value for money with no compromise on performance. Amsak’s single girder crane has reduced wheel loads, saving costs on new support structures and increased lifting capacities on existing structures.

Amsak cranes offer various crane beams to end carriage constructions to ensure optimum use of headroom available. Hoists are offered as standard in low headroom format running on the bottom flange of the beam.

The mechanisms used in our industrial cranes are indivisible part of them, covering the range of Chain hoists from 250 Kg to wire rope hoists of 30 Tons.

They are of very robust construction with a high level of standardization, making them very modular and adaptable to any need; high reliability components are available for a wide range of applications.

Amsak Crane designs, fabricates and installs gantry bridge crane systems to meet your material handling requirements. Our gantry bridge crane systems are available with either single, double girder bridges. Gantry cranes are ideal for use in aircraft, automotive, and marine repair shops. They also work well in warehouses, machine shops, and loading areas. Gantry-cranes are supplied with four roller-bearing steel wheels for easy maneuverability.C

Gantry cranes are also available running on rubber tyres so that tracks are not needed.Rubber tyre gantry cranes are essential for moving Steel Coils Containers from berths throughout the rest of the yard. For this task they come in large sizes, that are used for moving to straddle multiple lanes of rail, road, or container storage. They also are capable of lifting fully loaded containers to great heights. Rubber tyre gantry cranes come in the form of straddle carriers which are used when moving individual containers or vertical stacks of containers.Portable gantry crane systems, such as rubber tyre gantry cranes, are in high demand in terminals and ports restricted in size and reliant on maximising vertical space and not needing to haul containers long distances. This is due to the relatively slow speed yet high reach of rubber tyre gantry cranes when compared to other forms of container terminal equipment.

Portable gantry crane systems, such as rubber tyre gantry cranes, are in high demand in terminals and ports restricted in size and reliant on maximising vertical space and not needing to haul containers long distances. This is due to the relatively slow speed yet high reach of rubber tyre gantry cranes when compared to other forms of container terminal equipment.

nderslung-Cranes are the ideal solution when supporting steelwork beneath the crane is not an option. We offer single span and multi-span options. As underslung-Cranes are supported from the roof structure, minimised loadings are usually a requirement. Amsak-Cranes manufacture a standard range of single girder underslung cranes in capacities up to 12.5 tonnes. Larger capacities are available upon request but roof loads may be a limiting factor. Multi-span cranes are available with overall bridge lengths greater than 100 metres.

Double Girder Cranes:
Double girder cranes give a better height of lift in a given headroom as the hook travels between the beams. They are available in higher capacities than single girder and for heavy duty applications they can be supplied with open winch hoists.
Normally double girder cranes have 25 tonnes capacity and also in higher capacities. One simple advantage of the double girder design is the possibility to fit a walkway to the crane which gives maintenance access to many critical parts of the crane and often to overhead lighting etc.

Industrial Applications of Double Girder EOT Cranes:

Gantry cranes are also available running on rubber tyres so that tracks are not needed.

Rubber tyre gantry cranes are essential for moving Steel Coils / Containers from berths throughout the rest of the yard. For this task they come in large sizes, that are used for moving to straddle multiple lanes of rail, road, or container storage. They also are capable of lifting fully loaded containers to great heights. Rubber tyre gantry cranes come in the form of straddle carriers which are used when moving individual containers or vertical stacks of containers.

Portable gantry crane systems, such as rubber tyre gantry cranes, are in high demand in terminals and ports restricted in size and reliant on maximising vertical space and not needing to haul containers long distances. This is due to the relatively slow speed yet high reach of rubber tyre gantry cranes when compared to other forms of container terminal equipment.

Single Girder Cranes:
Single girder cranes are designed to cover a wide range of modern industrial demands, providing excellent value for money with no compromise on performance. Amsak's single girder crane has reduced wheel loads, saving costs on new support structures and increased lifting capacities on existing structures.
Amsak cranes offer various crane beam to end carriage constructions to ensure optimum use of headroom available. Hoists are offered as standard in low headroom format running on the bottom flange of the beam.

Industrial Applications of Single Girder EOT Cranes:

Amsak Cranes Hoist-cranes are designed to cover a wide range of modern industrial demands, providing excellent value for money with no compromise on performance. It is designed with state of art Latest techniques, strict quality checks at various stage and final overload testing assures high reliability and safety.

We are the South region partners with Electromech for Torqk Hoist.