Bangalore, Karnataka, India
Verified
Add Review
Our Products
Based on a method developed around 1985 by Courtaulds Reseach this test can be used to screen fabrics for their susceptibility to exhibit Phenolic, or elusive, yellowing where garments or fabrics exhibit yellowing making them unfit for sales without reprocessing.
Through extensive sampling and testing procedures, SDCE products not only are guaranteed to confirm to the standard, they also have excellent continuity of performance from batch to batch over many years. Testing not only includes practical and independent performance testing but also quantitative analysis of the concentration of active ingredient on the papers
Due to the limited shelf-life of the papers (3 months once the heat sealed barrier foil bags have been opened), SDCE pack all their papers in small pack sizes to reduce waste or the temptation to use up out-of-date papers. Also SDCE have developed a woven tape for the control fabric, this relatively heavy construction makes assessment and grading of the yellowing easier for the technician.
Phenolic yellowing Kit - SDCControl Fabric 10x3cm 25 piece pack
BHT Free 63 Micron Film 400x200mm 100 piece pack
Impregnated Test Papers 50 piece pack
Glass Plates 100 x 40 x 3mm
One of many colour fastness tests, this is a predictive test to assess the potential of white or pastel-coloured yarns, fabrics or garments to yellow (garment yellowing). Our Test Kit is the original, developed by Courtaulds Research, for investigating complaints arising from transit or storage yellowing. Beware of copies and counterfeit products, which do not produce accurate or consistent results or might cause health and safety issues.
Phenolic yellowing Kit - James HealBHT Film ( Pk of 100 pcs ) ( 400 x 200 mm )
Control Fabric ( 25 pcs pk - 100 x 30 mm )
Glass Plates (Pack of 10 Pcs) - 100mm X 40mm X 3mm - James Heal
Impregrated Test papers ( 150 pcs - pk )( 100 x 75 mm)
Impregrated Test papers (50 pcs - pk )( 100 x 75 mm)
For heating any solution in the lab.
Up to 140 degree Centigrade can be achieved with instant heating.
12 x 16 top plate gives options of multiple beakers keeping at a time.
Top plate is provided with fully stainless steel to avoid rusting.
Can heat continuously any type of Liquid solution in the lab.
Temperature control can be achieved by thermostat control.
Safe to use.
Option of stirring is available.
Non stick coated top plate for easy operation.
Top plates with lesser dimension like 77 for single station also available.
Amith Garments Sample Cutter for GSM is a very useful round cutting machine to cut 113 mm diameter round sample to calculate GSM of fabric.
Product Details:Amith Garments Sample Cutter for GSM is completely made out of high quality aluminium casting. It is fitted with four German cutting blade & steel blade holders. All parts are meticulously designed and precisely engineered for flawless performance & long life.
Special features:Latest design sample cutting machine for GSM.
High quality cast aluminium used in the body.
Light weight for easy operation.
Cut sample dia 113 mm or 100 sq cm in area.
High quality German cutting blade is used.
Specially designed round knob for easy operation.
Safety lock is incorporated for operator safety.
Stainless steel blade holder for lifelong performance.
Water Bath 6 Holes and 12 holes Q-TEST.
For Sample Dyeing of cotton yarn, lea. At a time 12 samples can be treated in our all stainless steel rectangular, double walled water bath with each pot of 500 ml. All inside and outside are of Stainless steel.
Ambient to 100 degree temperature range. Fitted with imported thermostat for precise control of temperature.
Net weight : 15 kg for 6 holes & 25kg for 12 holes.
Net Dimension: lengthdepthheight 141213 for 6 holes 20 16 14 for 12 holes.
GSM Pads : Bigger (12 X 12 Size), extra thick, durable GSM Pads with option to use both sides.
The fabric piece cut in GSM Cutter can be mounted on this machine for direct reading as ‘GSM ‘.
Also can be used for multipurpose weighing options up to 300 grams in 0.01 grams sensitivity.
Can read results in grams, ozs, carrots etc. Also can cover “piece counting options”.
The instrument is repairable and recaliberatable.
Adoptor or battery interfaced.
Option of pocket weighing balance is also available.
Net weight :2.5kg
Dimension : length×depth×height=12”×10”×10”
For fibre / yarn / fabric sample dyeing purposes at 95o in lab conditions.
Dyeing programmer model having 50 program memory, each program provided with 25 steps, LCD displaying program number, steps, gradient, hold time and hold temperature on the screen with service free controller.
Stainless steel 304 used in major parts .Beaker of SS 316 leak proof used.
Temperature can go up to 99 oC.
To detect broken needle or any ferrous particle in woven/knits garment & socks.
Portable model with latest & modern aesthetics.
Minimum detection level 2.5 mm.
Buzzer will alert on detection of iron particles.
Small garments of low thickness up to 50mm can be easily checked.
Small in size & portable with all accessories.
Liquid Crystal Display with function annunciation.
Test Range : 2.5 to 99, 999 RPM [r/min]
Resolution : 0.1 RPM (2.5 to 999.9 RPM), 1 RPM (over 1, 000 RPM)
Test Range Select : Automatic
Memory : Max. Value, Min. Value, Last Value
Detecting Distance : 50 to 250mm / 2 to 10 Inch (LED) / 50 to 500mm / 2 to 20 Inch (Lazer)
Battery : 4/1.5V AAA (UM-3)
Amit Garment Chlorine and Non-Chlorine Test Kit is very convenient way to test colour fastness to chlorine and non-chlorine bleach in textile fabrics.
Spot Test Kit for Chlorine and Non-Chlorine Bleach includes following chemicals:Sodium Hypochlorite
Sodium Hydroxide
Sodium Perborate
Test Procedure:Sodium Hypochlorite( chlorine Bleach):Pour one drop of Sodium Hypochlorite solution on the test specimen.
Wait for one minute.
Wash the sample in normal water.
Dry it.
Now, grade with grey scale for colour change.
Sodium Hydroxide(Non-Chlorine Bleach):Pour one drop of Sodium Hydroxide solution on the test specimen.
Wait for one minute.
Wash the sample in normal water.
Dry it.
Now, grade with grey scale for colour change.
Sodium Perborate (Non-Chlorine Bleach) Preparation of Solution:Pour 10g of Sodium Perborate powder in 150 ml of distill water.
Pour one drop of Sodium Perborate solution on the test specimen.
Wait for one minute.
Wash the sample in normal water.
Dry it.
Now, grade with grey scale for colour change.
Q-TEST/UNIQUE micro scan metal detector model MSMD -600 having an aperture size of 600mm width and 100mm height and belt width of 550mm.
Designed to detect metal contamination of 1.0mm broken needles.
Fitted on the mild steel conveyor system of 1.5meter with all accessories.
Auto reversible with detection sound.
Construction:Metal detector: Stainless steel 304.
Conveyor system: Mild steel open frame with powder coated.
Operating voltage:Metal detector: 230 VAc, 1 ph, 50 Hz
Conveyor system: 415 VAc, 3 ph, 50 Hz
Belt speed: 25-30 meter per min
Range S-B/24.4 +/- 1.5 Psi(QAO-11QBF)
Range S-C/35.3 +/- 1.5 Psi(QAO-09RJA)
Range S-D/57.1 +/- 2.0 Psi(QAO-11QBD)
Range S-E/73.6 +/- 2.5 Psi(QAO-11VAA)
Range S-F/82.6+/- 3.0 Psi(QAO-10RCJ)
Range S-G/119.2 +/- 3.5 Psi(QAO-11PBD)
Indian Type Options available are as below :3.5Kg/cm2 + or - 0.2 (10 Pieces Pack) - 90mm X 330mm
5.2Kg/cm2 + or - 0.2 (10 Pieces Pack) - 90mm X 330mm
7.3Kg/cm2 + or - 0.3 (10 Pieces Pack) - 90mm X 330mm
8.0Kg/cm2 + or - 0.3 (10 Pieces Pack) - 90mm X 330mm
12.8Kg/cm2 + or - 0.4 (10 Pieces Pack) - 90mm X 330mm
We also supply calibrated foils for Bursting Strength Tester used in Carton Box/Paper Board testing.
Model to check humidity & temperature in lab.
Portable & can be carried from place to place.
Net weight : 125 gm
Net Dimension: lengthdepthheight 8214.
Magnification of adjustable up to 8X with 10mm scale helps one to count threads per inch easily and accurately.
Very fine pick glass with pointer.
Metal body.
Magnification of adjustable up to 8X with 10mm scale helps one to count threads per inch easily and accurately.
Easy Operation.
Effortless Zigzag cutting of suiting, shirting, blended woolen, denim, furnishing, knitted & tyre cord fabrics.
Fabric can be accurately aligned before cutting.
A hand lever operated device with stopper is provided to get To and Fro motion of sliding table with calibration which guarantees the equal, accurate & high production of samples
Ideal for cutting maximum fabric heap of 50mm & maximum 20 strokes per minute.
Once press the green push button switch, the machine will stop automatically after cutting the fabric.
The main body of machine will be single piece, made from iron steel material so as to get smooth and vibration free operation.
Totally enclosed heavy duty type speed reduction gearbox provided to get efficient working of machine.
Provided with adjustable screw arrangement with eccentric to get the blade position to maximum upward or downward.
Machine will be completely covered and provided with safety guards.
Models available in different blade size having 13", 18", 24", 32" & 36"
To find out fabric thickness and compressibility in mm.
Portable handy model with easy and safety operation.
Used to find out thickness of any kind of fabric/paper/cardboard/blanket.
Digital display of results.
Range 0-10 mm with 1micron resolution.
Options of computer connectivity exist.
Net weight : 3.5 kg
Net Dimension: height 7.
Used for permanent marking during shrinkage tester.
Permanent marking and dries quickly.
Leak Proof
Available in Yellow, Black and Red Colours.
- With Electric Stop Motion
- With Steel Inserted Wall Cylinder & G.M Sinker Ring
- With Hardened & Grinded Cams
- With Cut Cam Plate CNC
- With Winder take down System
- With Motor Attachmed & Motor 0.5HP 3PH 960 RPM
- With Top Creel System
- With Auto Control Panel
- With Cam Box Feeder
- With Groz Beckert Needles 77.73 & Sinkers
- Dia : 1, Feeder : 1, Needle : 120
Model to check humidity & temperature in lab.
Wall mounting.
Net weight : 125 gm
Net Dimension: lengthdepthheight 8214
For simultaneous heating and stirring works.
Available in 16cm*16cm platform for single station option.
Multi station options also available.
Net weight : 5.5 kg
Net Dimension: lengthdepthheight 71317.
Top plates with lesser dimension like 77 for single station also available.
Thermostir has its latest design with portable size. Equipped with all accessories like two 500ml beakers, dust cover, magnetic paddle which is coated with Teflon to tolerate high temperature & to heat chemicals. Solution heated mostly with simultaneous stirring option.
For simultaneous heating and stirring works.
Available in 16cm*16cm platform for single station option.
Multi station options also available.
lesser dimension like 77 for single station also available.
Thermohygrograph – Q TEST Useful instrument to indicate and record temperature and humidity in the lab.Highly precise instrument.Results can be recorded on hourlydailyweekly basis by way of graphical representation.Two separate curves, one for humidity and other for recording temperature in the lab.
Thermohygrograph – Q TEST
Useful instrument to indicate and record temperature and humidity in the lab.
Highly precise instrument.
Results can be recorded on hourly/daily/weekly basis by way of graphical representation.
Two separate curves, one for humidity and other for recording temperature in the lab.
Net weight : 2.9 kg
Net Dimension: length×depth×height 14”×7”×12”.
Pick glass with lens & scale to determine no. of threads per inch in warp way.(reads per inch)& weft way (picks per inch).
Magnification 40x powerful.
Used for measuring weaving defects/printing defects/embroidery defects.
Comes with inbuilt measuring scale of 1/10th of the inch.
Net weight :600 gm
Dimension : lengthdepthheight=61/421/22
Determine various physical properties of Fabrics & Garments.
Ergonomically designed, rugged construction for extended life cycle; constant rate of extension (CRE) principle.
Selectable force unit : kgf, lbf and Nf; selectable elongation unit : mm, inch and percentage.
State-of-art microcomputer controlled technology facilitates advanced features.
User-friendly menu driven operating system. Parameter setting flexibility through navigation keyboard.
Separate calibration program makes quick and reliable calibration.
Specially made jaws/grips suitable for standard test methods.
Window based special application software facilities statistical and Graphical reports.
Useful scale with sliding facility.
Easy to calculate with the help of the scale conversion from English count to other systems of measuring count like tex, denier etc.
Directly gives reading of equivalent denier/tex/metric count etc to thee yarn count.
Also on the reverse of scale conversion table from grams t ounces to pounds etc. can be easily noted
Specially designed equipment to be used in laboratories for continuous shaking liquor.
Specially designed rubber beaker holders give flexibility to use glass beakers without damage.
The equipment helps in shaking or agitating the solution / liquor at predetermined speed for desired span of time.
Technical Details :
Useful instruments for shaking solutions/liquid in the lab.
Used for fibre composition tests.
Multiple stations at a time up to 16 stations for 250ml beaker.
Both timer control and RPM control available.
Speed and Timer control helps person to control level of shaking at different heating levels.
Pre-set timer to fix total time of shaking.
Glass beaker without leakage/breakage can be used due to special rubber gasket grips.(option of stainless steel holder is also available for rust free operations at extra cost).
Six numbers of beakers are given complimentary.
Net weight : 17 kg
Net Dimension: length×depth×height 21”×21”×15”.
Digital Model
Size:18m x 18m inside
Maximum Temperature Range: Ambient 250c
Least Count:0.1 Degree C
Controlling: Digital Temperature Controller cum Indicator
Stainless Steel inside Chamber, Outer M.S. neatly Powder coated.
A circulating fan in the chamber for uniformity of Temperature.
A Separate control panel, housing all indicators is provided on the right side of the main body allowing easy maintenance and accessibility.
Aesthetically designed for long life and comfortable usage. Supplied with shelves (Adjustable Stainless Steel)
Imported with titanium quoting.
Easy handling.
Long durable.
Special pivot to make cutting operation easy.
Imported with titanium quoting.
Easy handling.
Long durable.
Special pivot to make cutting operation easy.
We offer various standard lamps from Philips/GE/Macbeth/verivide for color matching in textiles like fibre/yarn/fabric/garment and any kind of garment accessories.These lamps meet CIE specifications and offer lux levels and CRI index as per standards.
Lamps offered are :
D75: A bluish colored light source originally used for grading cotton & their evaluation applications. It offers 7500K.
D65: A light bluish colored light source used in color matching applications of paints, textiles, raw inks and other manufactured products. It offers 6500K.
D50: A near white light source used in the evaluation of graphic arts and imaging applications. It offers 5000K.
Ultra violet: Light energy not normally visible to human eye, but which is present in natural daylight.
Cool White Fluorescent (CWF) - A wide band single phosphor fluorescent source commonly used in commercial lighting applications . It is characterized by emitting high amounts of green energy, with a color temperature of approximately 4100K. It has a CRI or approximately 62.
TL84 - A narrow band tri-phosphor fluorescent source originally designed for commercial lighting applications . It is characterized by emitting high amounts of green energy, with a color temperature of approximately 4100K. It has a CRI of approximately 86.
TL830 - A narrow band tri-phosphor fluorescent source originally designed for commercial lighting applications . It is characterized by emitting high amounts of yellowish red energy, with a color temperature of approximately 3000K. It has a CRI of approximately 86.
Ultralume 30 (U30 or 30U) - A narrow band tri-phosphor fluorescent source originally designed for commercial lighting applications . It is characterized by emitting high amounts of yellowish red energy with a color temperature of approximately 3000K. It has a CRI of approximately 85.
Ultralume 35 (U35 or 35U) - A narrow band tri-phosphor fluorescent source originally designed for commercial lighting applications . It is characterized by emitting high amounts of reddish yellow energy with a color temperature of approximately 3500K. It has a CRI of approximately 85.
Illuminant A - is a standardized illuminant described in the international standard, CIE Publication 15.2 and specified for use in color matching applications in ASTM D1729-96.It offers 2865 K
Horizon – Reddish in color source described in older specification and used for color matching applications.It offers 2300K.
Vernier calliper is used to measure the distance with high accuracy and precision.
These callipers are comprised of a calibrated scale with fixed jaw and another jaw with pointer that slides along the scale.
The distance between the jaws are then read based on position of pointer on the scale.
Available in 0-6 inches/0-12inches with electronic digital display of distance with accuracy of 0.01mm.
Attractive shape and elegant design.
Accuracy and construction confirms to DIN standards.
Specifications:
Taring Range : Up to full capacity
Response time : 3 secs
Power Req : 90-250V, 50/60Hz, 10 Watt
Operating Temperature: 10 to 45 deg C
Garment Weighing Scale ( 1 gm - 35 Kg):
Bright LED display
Clear and bright extra display for customer viewing at a distance
100 % tare facility
Net & Gross weight indication
Accumulation of weights in memory
Rs. 232 interface to connect to a computer / printer
Audio visual overload indication
Optional Battery Backup.
We Offer Garment Weighing Scales from 0.0001 up to 500Kg for difference purposes in Garment/Textile Industry :
For Measuring Yarn Count
For Measuring Chemicals Weight
For GSM Calculation
For Piece Counting Options to calculate No. Of pieces in label/Button/Collar Bone/Polybag Categories
Platform Weighing Scale for measuring carton boxes
To Measure weight of fabric pieces/garment samples
| Models | Capacity | Readability | Repeatability(+ / -) | Linearity(+ / -) | Pan Size (mm) |
|---|---|---|---|---|---|
|
CT-30K1 |
30 kg | 1 g | 1 g | 2 g | 225 x 300 |
|
CT-30K2 |
30 kg | 2 g | 2 g | 2 g | 225 x 300 |
|
CT-35K2 |
35 kg | 2 g | 2 g | 2 g | 225 x 300 |
Refractometer - Hand held - Q-TEST
Hand held refractometer is used to detect concentration of any solution.
Very useful in textile industry to check the starch content in terms of percentage in sizing paste.
Very attractive look with ATC (Automatic temperature compensation system).
Portable in size and can be carried from place to place.
Range: 0-32% 0.20%.
Net weight : 150 gm
Net Dimension: length 180mm.
GSM Blades Bigger (12 X 12 Size), extra thick, durable GSM Pads with option to use both sides.
Filler/ Carrier Yarn (Black) - 1 Pkt
Filler/ Carrier Yarn (White) - 1 Pkt
Black Cross Sectioning Plate- 5 Nos
Pick Needles 4 Nos
Spring Clip (Wooden) 5 Nos
Sharp Scissor -1 No
Single Edge Razor Blades 2 Nos
Flat Brush 1 No
Glass Slides (50 Nos) 1 Pack of 50
Cover Glass ( 24 Nos) 2 Pack of 24
Small Corks 10 Nos
Needles & Needle Threader - 1 Pkt
Cutting Block (Glass) 1 No.
Tweezer 1 No.
Filler/ Carrier Yarn (Black) - 1 Pkt
Filler/ Carrier Yarn (White) - 1 Pkt
Black Cross Sectioning Plate- 5 Nos
Pick Needles 4 Nos
Spring Clip (Wooden) 5 Nos
Sharp Scissor -1 No
Single Edge Razor Blades 2 Nos
Flat Brush 1 No
Glass Slides (50 Nos) 1 Pack of 50
Cover Glass ( 24 Nos) 2 Pack of
Small Corks 10 Nos
Needles & Needle Threader - 1 Pkt
Cutting Block (Glass) 1 No.
Tweezer 1 No.
Buffer Solution pH 10.01 Eutech Make (480ml pack)
Buffer Solution pH 10 Merck Make (500ml pack)
Buffer Solution pH 10 Reagecon Make (500ml pack)
Buffer Solution 4.01 Eutech Make (480ml Pack)
Buffer Solution 4 - Merck Make (500ml Pack)
Buffer Solution 4 - Qualikems Make (500ml Pack)
Buffer Solution 4 - Reagecon (500ml Pack)
Buffer Solution 4 SD Fine Make (500ml Pack)
Buffer Solution 6.86 - Eutech Make (480ml Pack)
Buffer Solution 7 - Eutech Make (500ml Pack)
Available with MSDS Available in below ranges and makesBuffer Solution 7 - Merck Make (500ml Pack)
Buffer Solution 7 - Qualikems Make (500ml Pack)
Buffer Solution 7 - Reagecon Make (500ml Pack)
Buffer Solution 7 SD Fine Make (500ml Pack)
Buffer Solution 7 - NICE Make (500ml Pack)
Buffer Solution 9 - Merck Make (500ml Pack)
Buffer Solution 9.2 - Qualikems Make (500ml Pack)
Buffer Solution 9 - Qualikems Make (500ml Pack)
Buffer Solution 9 - Reagecon Make (500ml Pack)
Buffer Solution 9 SD Fine Make (500ml Pack)
Available with MSDS
The Magnascope is an ergonomically designed, self illuminated optical magnifier at an affordable price. It is the optical eye of an inspection engineer. Magnascope is designed for industrial inspection of components, parts, moulds, bearing, watch movements, electronic components, wiring on printed circuit boards solder and joints. The scientifically designed Magnascope provides visual convenience to industrial workers during inspection. The Magnoscope is having flexible arms with robotic type movements. The industrial worker can move magnifying lens in any position of his convenience during inspections.
The scientifically designed Magnascope provides visual convenience to industrial workers during inspection. The Magnoscope is having flexible arms with robotic type movements. The industrial worker can move magnifying lens in any position of his convenience during inspections.
FeaturesShadowless Illumination
Fatigue Free- vision
Flexible arms
Rugged
Stable and Durable
Amith Garments Thickness Tester is very useful for college, Universities, Textile Mill & Export Houses. It is used to evaluate the thickness of fabrics.
Product Details :Amith Garments Thickness Tester is completely made of Mild Steel which is duly powder coated for long life. It consists of an analog dial which shows the thickness of fabrics. It is supplied with 10 mm pressure foot for accurate results. A dead weight of 78.5 g is provided for creating standard pressure on the test sample. Lifting arm is fitted to lift the pressure foot upward to remove & put the sample under this.
Special Features :Used to evaluate thickness of fabrics.
Supplied with 10 mm pressure foot.
Standard dead weight 78.5 g.
Specifications :
4 Shaft Capacity - Ideal for start ups - "Easy to access levers" for shaft lifting.
Weaving width 24" (61cms) - Compactly designed to fit smaller space.
Overhead Beater - Innovative design to beat the weft perfectly with the fell line.
Steel Reed - 1 No. 10 dpi/12.5 dpi/16dpi.
Timber - Made of Lacquered Beach Hard Wood - Aged and Treated to stay away from fungal attacks for years.
Swedish Texsolv Heddles - Strong & Easy to use and soft on heads during drawing in and adding up additional heddles also possible.
Warping Frame - To make 10-11 Mtrs of warp.
Supplied with - 2 Nos. stick shuttles, Heddles Hook, Cross & Warp Sticks, Learn to weave on the table loom brooklet, Warping Frame.
Thermo Strips are basically paper strips with temperature indications. These are very useful for measuring exact temperature during pasting fusible interlining in the garments. It is basically used for measuring hot roller nip temperature in any kind of machine.
Procedure TestingThermo Strips are placed inside the fabric where interlinings have to be pasted.
Then, the fabric is passed through the hot nip of the fusing machine.
One of the portions of the strips gets black in colour.
See the temperature written on that portion.
This is the fusing temperature.
Available Ranges071 - 110 C
093 132 C
121 160 C
127 171 C
143 182 C
160 199 C
182 224 C
82 127 C
160 204 C
Advanced model to check humidity and temperature in lab. Wall hanging model / table top model.
Temperature range 0o C- 50o C or 32o F 122oF.
The Colour Matching cabinet is used for evaluation of various colours under different light sources.
This is an important equipment of textile industry and is suitable for almost all applications that require colour consistency and quality. Color matching cabinet is the equipment designed for the visual evaluation of shade and color differences under standardized and controlled lighting conditions.
Colour Matching Cabinet has its usages in visual evaluation of colour matching of textiles, paints, plastic, paper, Automotive, Graphic Arts, Inks, Paints, Cosmetics, Food, Medical , Pharmaceutical applications and many more with help of different light sources.
It is very economically designed & comes with calibration certificate.
It consists of light sources like D65, CWF, INCA, UV & TL84.
Interior paint with muncell as per International Standards or Sun mica wood of standard colour.
Supplied with 45 degree angle table for viewing fabrics/yarns/sewing thread without any distractions.
Easy to handle as each light can be operated separately with buttons individually.
Hour meter for measuring usage of light sources.
Other light sources like TL83 (H & M), U30, D75 can be supplied optionally.
The sample to be checked for the colour difference is placed on the 45 degree viewing angle along with the buyer original.
Used to match the shade cards used in dyeing for the perfect match of
rief Details of using the equipment- Few Examples are Textile testing Sector:The sample to be checked for the colour difference is placed on the 45 degree viewing angle along with the buyer original.
Used to match the shade cards used in dyeing for the perfect match of shades.
| Light Source | Type of Light | Colour Temperature |
|---|---|---|
| D – 65 | Artificial Daylight | 6500 K |
| INCA | Incandescent light | 2856 K |
| TL - 84 | Fluorescent Light | 4150 K |
| CWF | Cool White Fluorescent | 4150 K |
| UV | Ultra Violet Light | Ultra Violet black light |
SDCE Light Fastness Standards 1 to 8 each pattern 15x25cm
These are a series of 8 wool fabrics dyed with specified blue dyes to give blue wool cloths ranging from very low light fastness to very high light fastness. This forms a numerical scale of 1 to 8 where 1 has the poorest light fastness, to 8 which has the best light fastness. This allows fabrics to be graded, using a Grey Scale for Change in Colour, for correlation with performance in use. This is used to predict the suitability for a given end use; typically apparel would be a minimum of grade 4 whilst furnishings would require a grade 6. They are used in the ISO 105 B series of tests and can be used in conjunction with the Humidity Control fabric for machine calibration.
To complement the range of Blue Wool Standards we also supply specially prepared mounted card that is totally free of any optical brightening agents. This ensures mounted samples are easier to grade as the card does not show a significant Colour change. It is widely recognised that the Colour of the background can influence how an item is finally graded.
SDCE Humidity Control Fabric
This is an azoic dyed cotton fabric with specified fading properties, which varies with the amount of relative humidity.
It is used as a calibration tool for light fastness testing. When the humidity of the light fastness testing machine is correctly set it will fade at an identical rate to the light fastness standard Number 5. It is supplied with a printed instruction sheet for its use to determine the correct settings for the relevant ISO 105 B series test method.
Polyester Ballast is available in 2 sizes of 30cm by 30cm or 20cm x 20cm. They are used to ensure that a wash load used for garment testing is of a sufficient weight. This closely simulates the washing of a garment in domestic washing machines. The 20cm x 20cm are designed to be used in the latest ISO 6330:2000 test method.
Available as per below :100 % polyester - 20cm *20cm 20 pcs of each 50gms - total 1kg/box - SDC
50 % cotton &50% polyester - dummy 3 - 92cm*92cm - 1.8 pounds per pack of 10pcs
100 % cotton - AATCC 16 pcs per pack 1.8 pounds
Type1-AATCC (36*36", 16pcs pk, w-4LBS, 100% cotton)
Type3-AATCC (36*36", 16pcs pk, w-4LBS, 50% cotton, 50% polyester)
The GSM cutter is used for determining the weight of the fabric- woven/knit/paper etc.for 100 sq.cms.
The instrument is a circular fabric sample cutter with which a uniform circular fabric is cut.
Easy to handle & economical.
It is a single solid machine with durable cutting wheels.
The area of specimen cut is 100 cm2.
Finest grade of aluminum used in the main body for light weight and robustness.
There is no replacement of blades & pads periodically. There is no running cost and no trouble and time loss changing of blades and pads frequently.
Amith Garments CROCKMETER MANUAL is used to evaluate color fastness to Wet & Dry rubbing with strict adherence to ISO & AATCC Standards. It is very useful for Textile Colleges, Mill, & export house Labs.
Product Details
Amith Garments Crockmeter is completely made of mild steel duly painted. It provides 9 N load on 16 mm finger. Stroke length is 1043 mm. All parts are meticulously designed and precisely Engineered for flawless performance & long life. Mechanical type stroke counter is provided for counting the strokes. It is supplied with all accessories.
Special features:
Manual Crockmeter as per ISO & AATCC.
Analog stroke counter for counting the revolutions.
Stroke length 1043mm & load on finger 9 N0.2N
U shape metal specimen Holder for easy gripping samples.
Special finger clip for easy fixing the crocking cloth.
Standard abrasive paper (No 320 ) for accurate test result.
