GST : 08AALCA8782F1Z8
Verified
Write a Review
Our Products
Industrial Chemicals
2 Products availableResins
1 Products availableInorganic And Organic Solvents
1 Products availableChemical Compound
1 Products availableLDPE Granule
1 Products availableChrome Pigments
1 Products availableBeads
1 Products availableWe are leaders in the market for providing best range of White MORT/ASTHO Thermoplastic Road Marking Paint, Yellow MORT Thermoplastic Road Marking Paint, White BS 3262 Grade Thermoplastic Road Marking Paint, Yellow BS 3262 Grade Thermoplastic Road Marking Paint and AMITEK Thermoplastic Road Marking Paint Commercial Grade
Features :
Additional Information:
Payment Terms : L/C
Delivery Time : PROMPT
Features :
Features :
Features :
PRODUCT DESCRIPTION
An ISO9001:2008 Company
Amitek Retro-reflective Thermoplastic Road Marking Material Conforming to BS 3262: Part 1 / 1989
Amitek Hot Melt Retro-reflective Thermoplastic Road Marking Compound is specially formulated with superior quality of synthetic resin , glass beads , plasticizers, polymers, aggregates, pigments and fillers focusing on excellent day and night visibility and retro-reflectivity. Our product conforms to the British Standards (BS) Specification 3262: Part 1 / 1989 . Based on aliphatic chemistry offers superior weathering resistance and color stability .The product is supplied in product form , heated and can be applied to the road surface .It provides optimum balance between melt flow and flow resistance to achieve well defined lines as per the desired width & thickness. It has excellent wear resistance and adhesion on both asphalt (also DBST) as well as cement concrete surface (after a coating of Primer in case of applying it on cement surface). Our endeavor is to do continuous research and development of new product meets our customers’ specifications in all climatic conditions worldwide
SALIENT FEATURES
Whiteness and Retro-reflective.
Fast drying thus good flow resistance.
Skid resistance.
Durability and long lasting results.
Heat stability.
Color stability.
Adaptable to any type of road.
Cost effective & provides value for money.
Nontoxic and environment friendly.
SURFACE PREPARATION
Prior to application the surface should be sound and in good condition. It must be clean, dry, free from dust, dirt, grease, oil or any other foreign matter. The road surface temperature should be above 5C. .Ideally existing markings should be removed prior to application. Thermoplastic Road Marking Material may be applied over existing thermoplastic markings provided that they are in good condition and should not be applied on old paint markings. On worn bituminous and concrete surfaces, a suitable primer should be used prior to application.
DIRECTIONS FOR USE
• Heat the material to 180 - 200°C in the pre-heater till it transforms into a homogenized liquid.
• Ensure that the road surface is clean and free from dust & moisture.
• Heavy deposits of paint require removal.
• For aged asphalt roads and concrete roads the application of a primer coat; is recommended for proper bonding of the material with the road surface.
• Ensure that the primer is thoroughly dry and void of solvent prior to application of the thermoplastic material. • Ensure temperature of 180 - 200°C and adequate agitation during application. • Do not hold thermoplastic above 180°C for more than six hours. • Do not heat the material above 220°C at any point in time.
• Change in color indicates that the material has been scorched owing to overheating and needs to be discarded. • Drop-on glass beads must be immediately deposited after thermoplastic application.
Additional Information:
Payment Terms : L/C
Delivery Time : PROMPT
PRODUCT DESCRIPTION
Colour: White, Yellow Finish: Gloss / Matt
A versatile road marking paint with excellent day and night visibility & retro reflectivity which provides optimum balance between melt flow and flow resistance to achieve well defined lines as per the desired width & thickness. It has excellent wear resistance and adhesion on both asphalt & concrete surface. Our endeavour is to do continuous research and development of new product meets our customer’s specification all climate conditions worldwide.
AMITEK Retro Reflective Thermoplastic Road Marking Paint complies with BS 3262: Part 1/ 1989 & MORTH 803.4.
AREA OF APPLICATION
Mainly recommended for traffic lane markings, roads, pavements, runways and airfields all over the country areas. Also can be used for relining on previous marks. Highly recommended where high thickness is needed to achieve. Can be used to paint concreate surfaces with primer and asphalt surfaces without primer but ensure there should be no standing and bleeding water in asphalt surface. When used in high trafficked areas the marking must have hardened completely before the area is reopened for traffic.
UNIQUE SELLING POINTS
• Whiteness & retroreflective.• Fast drying thus good flow resistance.• Heat, colour stability & high skid resistance. • Adaptable to any type of road.• Cost effective & provides value for money.• Nontoxic and environmental friendly.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Hot Melt thermoplastic road marking material is conveniently packaged in 25 kg PP bags in powdered form for easy handling and application.
Delivery Time : Ready to move
Ms. Pooja Bhargava (Amitek Infra Pvt. Ltd.)
148, Kasturba Nagar, Gautam Marg, Nirman Nagar, Jaipur, Rajasthan - 302019, India
https://www.amitekinfra.co.in
Share us via
