Our Products

Rolling Machine

Our Complete range of products are Roll Turning Lathe Machine, Pyramid Type Plate Rolling Machine, Pre Pinch Cum Pyrmid Type Plate Rolling Machine, Thread Rolling Machine and Heavy Duty Hydraulic Thread Rolling Machine.

Roll Turning Lathe Machine

STANDARD ACCESSORIES

Electric MoTor With control panel
Dead centres 2 nos
Square Tool Post
Thread Dial IndicaTor
Inchas/MM Threads change liver
Splash Guard
Fixed Stedy Rost
Face Plate
Rapid AuTo Feed
Oil Can
Driving plate
Centre holder (sloove)
Swarf Tray
Quick Change Gear Box
Coolant Equipment
Dog Chuck
Follow Steady Rost
Chuck Plate
Sat of Spanners & Key
InstructionsManual

SPECIFICATIONS

CAPACITY
ADMIT BEETWEN CENTER	2000 3000 4000MM	2000 3000 4000MM	3000 4000 5000MM	2000 3000 4000 5000MM	3000 4000 5000 6000MM	5000 6000 7000 8000MM
BED WIDTH	500	600	660	760	900	1050
CENTER HEIGHT	450	500	600	700	800	925
SWING OVER BED	900	1000	1200	1400	1600	1850
SWING OVER CARRIAGE	500	650	800	850	900	1200
SWING OVER CROSS SADOLE	450	600	800	850	1150	1350
SWING IN GAP	1250	1300	1400	1650	1950	2200
SWING IN FRONT OF FACE PLATE	225	250	250	250	250	250

HADE SToCK
MAIN SPINOLE BORE	100	100	105	105	105	125
MAIN SPINOLE NOSE	TAPER NOSE/ THREADED	TAPER NOSE/ THREADED	TAPER NOSE/ THREADED	TAPER NOSE/ THREADED	TAPER NOSE/ THREADED	TAPER NOSE/ THREADED
MAIN SPINOLE	MT-4	MT-5	MT-5	MT-5	MT-5	MT-5
NO OF SPEEDS	18	18	18	18	18	18
SPEED RANGE	15 To 450 RPM	10 To 300 RPM	8 To 250 RPM	8 To 200 RPM	4 To 100 RPM	2 To 50 RPM

TAIL SToCK
TAIL SToCK QUILL DLA	90 MM	100 MM	110 MM	125 MM	150 MM	150 MM
TAIL SToCK QUILL TRAVEL	250 MM	300 MM	300 MM	300 MM	350 MM	350 MM
TAIL SToCK QUILL TAPER	MT-4	MT-4	MT-5	MT-6	MT-6	MT-6

SLIDE & CARRIAGE
CROSS SLIDE TRAVEL	450 MM	500 MM	600 MM	725 MM	850 MM	1000 MM
ToP SLIDE TRAVEL	200 MM	200 MM	250 MM	250 MM	250 MM	250 MM
MAX ToOL DEMESNSES	35 x 35 MM	40 x 40	40 x 40	40 x 40	45 x 45	50 x 50

STEADIES
MAX MIN CAP OF FIX STEADY	50 To 400	100 To 500	100 To 550	150 To 650	150 To 750	300 To 900
MAX MIN TRAEVLLING STEADY	20 To 100	20 To 100	20 To 100	20 To 100	20 To 100	20 To 100

MOTOER
MAIN MOToR KW	37 KW	55 KW	55 KW	7.5 KW	11 KW	11KW
OPITIONAL RAPID MOToER FOR SADDLE	15 KW	15 KW	15 KW	15 KW	15 KW	15 KW
COOLANT PUMP MOTOER	0.11 KW	0.11 KW	0.11 KW	0.11 KW	0.11 KW	0.11 KW

THERADS & FEEDS
LONGITUIONAL FEEDS	45 0.05 To 1.5	45 0.05 To 1.5	45 0.05 To 1.5	45 0.05 To 1.5	45 0.05 To 1.5	45 0.05 To 1.5
CHOSS FEEDS	45 0.025 To 0.75	45 0.025 To 0.75	45 0.025 To 0.75	45 0.025 To 0.75	45 0.025 To 0.75	45 0.025 To 0.75
MEATRIC THERADS	45 1 To 15	45 1 To 15	45 1 To 15	45 1 To 15	45 1 To 15	45 1 To 15
WITHWOURTH THREADS IN TPI	45 60 To 2	45 60 To 2	45 60 To 2	45 60 To 2	45 60 To 2	45 60 To 2
MODULER THERADS	45 0.25 To 7.5	45 0.25 To 7.5	45 0.25 To 7.5	45 0.25 To 7.5	45 0.25 To 7.5	45 0.25 To 7.5
DIAMENTRAL PITCH THERADS	24 120 To 6	24 120 To 6	24 120 To 6	24 120 To 6	24 120 To 6	24 120 Tos 6
DIA OF LEAD SCREW	55 MM	60MM	60MM	60MM	60MM	60MM
PITCH OF LEAD SCREW	2TPI	2TPI	2TPI	2TPI	2TPI	2TPI

View Complete Details

Ask Latest Price & Details

Pyramid Type Plate Rolling Machine

SPECIAL SALIENT FEATURES :

Steel Fabricated fracture Proof Housings.
Wear resistant forged premium steel rolls.
LongitudalGrooves on Bottom rolls for correct Feeding of Plates.
Build in Lubricated Storage.
Circumferencialand Axial Grooves on Gun Metal Bearing for even Lubrication.
Gun Metal Bush Bearings.
Dropendopening system for easy removal of rolled shells.
Minimisedfeeding height for easy operation.
Well balanced design.
Controlled roll speed for accurate curvature performance.
Indicators provided for correct even top rollpresure.
Mechanical device Mechanism for easy sliding of non drive side top rollhousing.
Motor of reputed make.
Worm Reduction Gear-Box of reputed make.
Reverse Forward starter with overload thermal relay ofreputed make like Siemens/L & T/Cutler Hammer/HKS.
One piece fabricated heavy duty base frame.

UNIQUE SPECIAL DESIGNED OPTIONAL:

Extended rolls (To be orderedalongwithmachine)
Dies for rolling of angles, channels, pipes, flats, I-beam etc
Attachment for conical rolling.
Extra heavy base frame (for site work)
Direct coupled gear box with electric motor and electromagneticbrake.
Semi automaticcentralisedlubricationsystrm.
Feedingplateform.
Interchangeable extra top roll to roll shells of smallerdiameter
Spilproofre-usable lubrication system.
Manual or pneumatic or mechanical shell ejecting device.
Remote floating control.
Shell support device.
Gun metal nuts for smoother manual rotation.

SPECIFICATIONS

SR.	MODEL	CAPACITY	DIA.OF TOP ROLL	DIA.OF BOTTOM ROLL	MAIN MOTOR
NO.		MM	MM	MM	HP
1	PY 3-12	1250 x 3	100	90	2
2	PY 6-12	125O x 6	125	105	3
3	PY 10-12	1250 x 10	150	125	5
4	PY 12-12	1250 x 12	175	140	7.5
5	PY 16-12	1250 x 16	190	150	7.5
6	PY 20-12	1250 x 20	200	160	10
7	PY 25-12	1250 x 25	240	200	15
8	PY 3-15	1500 x 3	115	100	3
9	PY 6-15	1500 x 6	140	11 5	5
10	PY 10-15	1500 x 10	160	135	5
11	PY 12-15	1500 x 12	180	150	7.5
12	PY 16-15	1500 x 16	200	160	10
13	PY 20-15	1500 x 15	215	170	12.5
14	PY 25-15	1500 x 25	250	215	20
15	PY 3-20	2000 X 3	130	105	3
16	PY 6-20	2000 X 6	160	135	5
17	PY 10-20	2000 X 10	185	150	7.5
18	PY 12-20	2000 X 12	205	165	10
19	PY 16-20	2000 X 16	220	175	12.5
20	PY 20-20	2000 X 20	230	190	15
21	PY 25-20	2000 X 25	275	230	25
22	PY 30-20	2000 X 30	310	260	30
23	PY 3-25	2500 x 3	150	125	5
24	PY 6-25	2500 x 6	175	150	7.5
25	PY 10-25	2500 x 10	200	170	10
26	PY 12-25	2500 x 12	230	180	15
27	PY 16-25	2500 x 16	240	200	20
28	PY 20-25	2500 x 20	260	215	20
29	PY 25-25	2500 x 25	300	260	30
30	PY 30-35	2500 x 30	330	280	40
31	PY 36-25	2500 x 36	345	300	50
32	PY 42-25	2500 x 42	400	350	50
33	PY 50-25	2500 x 50	425	375	60
34	PY 3-30	3000 x 3	175	150	7.5
35	PY.6-30	3000 x 6	200	170	10
36	PY 10-30	3000 x 10	240	200	15
37	PY 12-30	3000 x 12	260	220	20
38	PY 16-30	3000 x 16	275	225	20
39	PY 20-30	3000 x 20	290	220	25
40	PY 25-30	3000 x 25	330	280	40
41	PY 30-30	3000 x 30	360	330	40
42	PY 36-30	3000 x 36	385	340	50
43	PY 42-30	3000 x 42	430	380	50

View Complete Details

Ask Latest Price & Details

Pre Pinch Cum Pyrmid Type Plate Rolling Machine

Plate Thickness 5mm to 50mm
Plate Width 1000mm to 3000mm

ALIENT FEATURES :

Three Roll Symmetrical Principle for Pre-pinching of Plate ends & Rolling Without Removing the Plate.
Modern Design, Robust Steel Construction.
High Quality Alloy Steel Rolls.
Built in Cone Rolling Feature.
Precise Controlls Through Push Button Operation with Interlock Circuit.
Electrical / Mechanical Overload Protection.
Centralised Lubrication System.
Rool Position Setting by Dial / Scale Readout.

View Complete Details

Ask Latest Price & Details

Thread Rolling Machine

Automatic Cold Thread Rolling Machines type BIC are suitable for Threading Screws. Bolts, Cycle and Automobile parts and other Mild Steel Bras, and Aluminium etc.

Two flat dies used in these Machine are fitted and all adjustments are vary simple, A water coolant pump keeps the dies cool.

SPECIFICATIONS

Model	Length of Blank in m/m	Dia of Bolts in m/m	Production P.M.	Motor H.P. & R.P.M.
1	12-50	3-6	40-60	5 x 1440
2	20-75	6-10	35-40	10 x 1440
3	25-100	8-12	30-40	20 x 1440
4	35-125	10-16	25-35	25 x 950
5	50-150	12-20	25-35	25 x 950

View Complete Details

Ask Latest Price & Details

Heavy Duty Hydraulic Thread Rolling Machine

The thread rolling is basically a cold-forging process that forms the entire length of an external thread by displacing the bla^E. material. Threads are produced on the blanks of predetermined diameter by a rolling action under pressure and between two rotating cylindrical steel roll dies whose working faces are suitably threaded. This action plastically deforms the blank in such a manner that a portion of the blank metal is displaced to form the root of the thread and raised in unbroken fibw-flow lines to form the crest of the thread.

The roll dies rotate synchronously on parallel or slightly tilted horizontal spindle shafts that are adjustable by sliding laterally. The dies are made of special steel alloy with an exceptional hardness and toughness resulting in maximum wear resistance. The blank is placed on a carbide tipped work rest blade or center support disposed between the dies and after a complete cycle v/ of approach, rolling and release of the hydraulically operated

right hand spindle shaft the rolled thread is removed. The blank is placed in the rolling position, either by hand or automatically. A timer built into the machine release the hydraulic pressure on the roll dies when the required diameter is completed and returns the right hand spindle head to its starting position.

SPECIFICATIONS

	AMI-24	AMI-25
Workpiece Diameter	Max. 24 MM	Max. 42 MM
Pitch	Max. 3 MM	Max. 5 MM
In-feed thread length	Max. 80 MM	Max. 150 MM
Through feed thread length	Max. 3000 MM	Max. 4000 MM
Rolling force infinitely adjustable	Max. 8 Ton	Max. 16 Ton
Rolling and idle time infinitely adjustable	Max. approx. 30-s	Max. approx. 30-s
Spindle axis swivel for through feed rolling	Max. 5	Max. 5
Spindle speed RPM	60/90	20/40/60
Main Motor	2.2 K.W.	3.7 K.W.
Hydraulic Motor	1.5 K.W.	2.2 K.W.
Spindle Diameter	40	54
Rolling Die Diameter	120	180
Weight of the machine	1000 kg apporx.	3200 kg apporx.
Standard electrical connection	415 V, 50 Hz, 3 ph.	415 V, 50 Hz, 3 ph.