Our Products
Leading Manufacturer, Supplier & Retailer of Through Feed Edge Banding Machine, Edge Banding Machine, Mini Cut Off Machine and Heavy Duty Cut-Off Machine.
Cutting ferrous metals with abrasive disc at 4000 R.P.M.
or
Non-ferrous metals with carbide tipped 60-80 teeth saw blade at 4000 R.P.M.
or
Non ferrous metals with high speed steel saw blade 125-140 teeth with coolant supply at 14 R.P.M. Equipped with Simple and less time consuming quick action screw vice with quick one side mitre cutting a graduated scale arrangement. Cutting is carried out DRY and is the fastest method. Abrasive disc is easily replaced by carbide tipped saw and by interchanging the pulleys, wood, non ferrous solids or sections, plastics or light alloys can be cut.
| Cut-Off machines are versatile and cut nearly all materials in slabs, sections, tubes and bars. The cutting is by hand feed. It works at amazingly high speeds so that a solid m. s. bar of 25 mm dia is cut in almost 20 seconds. 60 x 60 x 8mm section in 25 seconds and 75 mm. dia pipe in 30 seconds, the Drive to cut-off wheel is from a motor through a set of vee belts on the wheel spindle. Motor is positioned on a hinged platform with counter-balancing spring for easy operation. An adjustable depth stop prevents accidental damages to cut-off wheel and regulates depth of cut. Cut-Off wheel spindle runs in pre-loaded bearings and is equipped with recessed flangs an adequate guard. Floor Stand Heavy gauge sheet metal fabricated is braced for rigidly. Firm bolting to foundation is necessary when machine is put into operation. The starter with convenient reach is flush mounted on one side of the stand. Coolant Pump An independently driven motorised with tank having sward partion, Coolant Pump An independently driven motorised with tank having sward partion, pipes and spout is an extra equipment. lt may be used only when high speed steel circular saw blade is used. Coolant is not required when used with abrasive wheel. Quick Cutting operation yields good cutting surface. For cutting ferrous metals or hard materials, aluminium oxide wheels (of normal corundum) i.e., soft wheels are recommended. For non-ferrous or soft materials, silicon carbide cut-off .wheels or metal cutting saws are recommended. Reinforced cut-off wheels minimize accidental breakages, last longer than normal cut-off wheels and are safe to operate. The life of grinding wheel mostly depends on the amount of work, material, size, strength or hardness of material, its alloy components etc. The Clamping Vice-Head unit in both AMI-16 and AMI-12 is "Quick Action Type". In AMI-16 it is tubular in which thethe screw is entirely protected from the abrasive dust and hence the wear & tear of the screw is almost nil.In AMI-12 the screw vice is cam-actuated to clamp the job instantly. Standard Equipment : Optional Equipment:
|
| SPECIFICATIONS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fort, Mumbai, Maharashtra 